Day 79: 1,5 L water +2 ml/atazyme Day 81: 1,5 L water + 2ml/atazyme Plants are not ready yet, gonna wait 5 more days and lets see how it goes. Temperatures so high these days, doing my best keeping the room cooler, hope its alright. Day 84: 1,5 L + ml/l atazyme

I came back after vacation, the girl is ready for cutting, the rainy weather has started, so there is a threat of rot, you can say I managed to find just a few small pits in time and removed them and threw them away, the big and stiff flowers look fantastic:) but after a long trip I was tired, so I didn't take quality photos :( no everything else, I am very satisfied with the result I got:) its smell already lets me know that it will be good:) a lot of sugar leaves from which I will make bubble hash:) I will update the weight when it dries.

New flowering continues to develop on this lady, she seems to be swelling up day by day. Yellowing of the fan leaves has started which usually means it's time to flush, I need to check the trichomes to see how amber they appear before I do just in case the flavour or yield could be effected.

On day 1 the plants are looking good. I confirmed that my one cola was seeded, so I removed all visible seed pods. After this run I will do a deep cleaning to make sure there is no pollen in my grow box. The rest of my plant colas seem fine... I changed out my reservoir and adjusted the PH to 6.1. I also dimmed my light to 75% to mimic spring conditions. On day 2 I adjusted the PH of the reservoir down to 6.1. The plants are looking great besides a few fox tails from too much light. On day 3 the PH in the reservoir is 6.2. On day 4 I diluted my reservoir with plain water to lower the ppm down to 400 ppm, and I adjusted PH to 6.2 . The buds are ripening for sure and smell great! I haven't gotten any autumn colors yet even though I have dimmed my grow light and lowered my night time temps. I hope by 8 weeks the plants will have some more purple tones but if not I'm good with the flower quality thus far :). The breeder says 7-8 weeks so I'm hoping I am close to the finish line. I will continue to monitor the trichomes for ripeness. On day 5 I adjusted the reservoirs PH to 6.0. I harvested my seeded cola on Pheno #1 as it had stopped growing/ripening and would be a good tester ;) On day 6 the reservoirs PH is 6.2. On day 7 the PH is 6.0 50 % pistils have turned amber so I believe I have entered my harvest window and expect to flush and harvest soon:) very excited!

This week has gone well again end of the upcoming week I’m gunna give them one last strip down then just let her do her thing. She’s a big girl and the smell is amazing grapefruit peels with a very sour background can’t wait to try this girl as grapefruit is one of my favourites and this girl has it all 😍

In the last days the buds of this girls are getting bigger and heavier day to day. It's my first grow so I'm very excited to see how they grow up, I love the smell of orange/lime and how many tricomes they have.

Stretch + 6 J'ai divisée la 90x60x140 en 3 parties (et donc 3 Diaries) : 1️⃣ 🏠 60x60x140 ☀️ FC-E 4800 => puissance a 20% 🍁 1x Black Bomb / Philosopher Seed 2x Amnesia Lemon / PEV Seeds 1x Blueberry / PEV Seeds 1x Blueberry / 00 Seeds 1x Wappa / Paradise Seed 1x Dark Phoenix / Green House Seed 1x Quick Sherbet / Exotic Seeds 1x Mango Cream / Exotic Seeds 1x Banana Frosting / Sensi Seed 1x Hindu Kush / Sensi Seed 1x Fast Mix / Sweet Seed 📎 https://growdiaries.com/diaries/122084-grow-journal-by-soosan 2️⃣ 🏠 30x60x90 ☀️ TS1000 => puissance a 50% 🍁 4x Fast Mix - Sweet Seed 📎https://growdiaries.com/diaries/124052-grow-journal-by-soosan 3️⃣ 🏠 30x60x50 ☀️TS1000 => puissance a 50% 🍁 4x Quick Sherbet - Exotic Seed 📎 https://growdiaries.com/diaries/122080-grow-journal-by-soosan Sponsorisé par Mars Hydro

12/01/18 Start of week 6 of flower. Buds are continuing to develop. The structures on the ladies vary widely. 1 has long sativa like colas. Another has 9 dominate colas and many many golf ball size side branches. 1 is a runt. amd the other is just ok. There are several phenos in these beans.

3° settimana di fioritura. Il profumo che emanano è già bello forte... immagino che l'ultima settimana sarà concentrato di aromi dolci e fruttati 😂🤣👍💪✌️🙏

La purple haze était vraiment plaisante à cultiver. Une des deux a eu un problème dès le début de croissance, et malgré tout, j'ai réussi à l'envoyer en floraison. Cela montre bien que les variétés de zamnesia sont très bien pour les débutants, elles sont très résistantes. La haze était de taille moyenne. Une odeur très épicée et terreuse, un vrai plaisir au nez. On voit bien que c'est une sativa, elle provoque de grosses crises de fou rire, la première fois que j'ai tiré dessus j'ai tiré trois taf et j'ai rigolé pendant 30 minutes, complètement incroyable. Très cérébrale, pleins d'idées qui nous passent par la tête, elle rend très énergique et n'a pas d'effet de détente sur le corps. Ne pas fumer en soirée avant d'aller dormir, plutôt en après-midi, j'ai beaucoup de mal à dormir si je l'utilise en début de soirée. Attention tout de même, elle provoque pas mal de parano je trouve, typique d'une sativa. En tout cas excellente variété pour aller marcher et profiter d'une belle après-midi. J'ai optenu 45g et 30g en sachant que j'ai eu pas mal de problèmes.

Guava wächst weiterhin ganz gut, die Blüten fangen langsam heranzuwachsen und man kann langsam ein leichten Duft wahrnehmen. Wir haben die Pflanze am Blüte Tag 21 noch einmal final stärker entlaubt. Wir gießen weiterhin im Durchschnitt alle 4 Tagen 1,5L.

Day 36 I guess I can call it bloom. Nice strong pistils shooting all over. She is the tallest so far making me raise my lights a little more. Day 38 Now Californian Snow is the tallest :) Ztrawberry stopped at a perfect height, it looks like she's gonna develop into a beautiful lady. Fat white pistils all over 😻 Day 39 Happy girl got 2500ml cm bg bb bh 6.3ph ~1EC She is perfect, symmetrical, stopped stretching at about 50cm, flowers are mostly leveled, branches are strong, leaves point up unless I water. I think she's also turning purple. Beaut 😻 Day 42 I think I saw some burnt tips but she still looks super happy and healthy. The most vigorous plant I've had.

Con mucha fuerza se ven las 25 nenas,todas alimentándose muy bien y muy comodas en su espacio

Did defoliation on all three never done it before not sure did k over do it but they needed the trim I had a lot of fan leaves blocking bud sights Jan23 started to use the self watering pots from acinfinity gallon in each pot with fish shit

Arrosage à l’engrais de croissance le jour 70. Tuteurage des plants. Les plants ne vont pas tarder à passer en floraison. Je pulvérise au purin d’orties le jour 73.

🚨 Blue Dream week 11 update 🚨 🚨 week 7 of flower!! 77 days old!! 🚨 So this will be my last feed post 4 these ladies!! I will begin flushing this coming up week!! Was disappointed in the first weeks of flower as she wasn't producing much but as the weeks have progressed these ladies have packed it on!!! Low stress training clips- @madmadameplant @madmanplant Www.madmanplant.com Other companies in this grow- @foxfarmsoilandfertilizer - 100% ffof @acinfinityinc - fabric pots @generalhydroponics - flora trio line @vivosun.official - inline exhaust fan @opulent_systems - 4x4x80 grow tent @fastbuds_genetics - 4 Blue dream seeds @inkbird_official - temp and rh controls This was my feeds 4 the week!! I will begin flushing from this point on.... 2/22/2022 2ml micro 4 ml bloom 1/4 ml ph down Ph 6.41 420 Ppm Solution temp 75.9°F 2/26/2022 2 ml micro 4 ml bloom 1/2 ml ph down Ph 6.40 400 Ppm Solution temp 76.5°F Well growers thanks 4 stopping by 2 check out my grow!! Till next week. Best of luck and Happy Growing!🌱💚💨🔥🔥🔥

Nothing has realy happened since I cropped the royal cream....It is just hanging. Decided to do a dry trim so that it takes longer to dry due to the fact I am having to just use my cupboard so the humidity is pretty low. Leaving the leaves on just means It takes longer to dry. I am going to crop the Easy Bud in the next few days when the mood takes me. I had 4 left over R. Cream seeds left over because I informed them that. bought 2x 3 packs and only 2 seeds germinated so they sent me another packet which is REALLY good of them and the sort of thing that means I would definitely use Royal Queen Seeds again, for sure! The trich's are basically all cloudy with a few clear. I cant see any amber but my loupe is a ridiculously cheap Chinese piece of crap. I will invest in a microscope camera so I can hook it up to my phone or MacBook. It is way too hard to keep everything steady In order to see what is popping with my sexy trichomes. Obviously feeding has stopped for about a week now. I forgot to change it In the diary last week so will try and correct that now.. I know it is not strictly relevant but I had to go somewhere earlier and took a video because I was able o walk in the middle of a main road in my town which Is usually packed full of cars, especially at the time I was walking on it. It is a time that makes me even more glad I grow my own. I really need to buy the bigger tent, lights and re-locate to the bigger, more subtle cupboard (not the one i am using to dry my weed in the video I posted) and then I will be able to effectively ScrOG the 2 or 3 plants I have, in order to maximise yield so I can be totally self sufficient with regards to my cannabis medicine. UPDATE - MONDAY I just realised I have made a proper idiots mistake an missed out on some much tastier buds because of it. OK, so I got paid today, so I though I would treat myself to some of them cheap COB chips I used for my last grow because hey were super cheap and actually really effective considering the price. I ordered 2x 100w 6000k veg spectrum chips with a solderless connection for my power. I also ordered one of these heatsink + reflector. https://www.amazon.co.uk/gp/product/B01MT824NP/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 My thinking was that I have a spare heatsink here that the old citizen CLU-048 is attached to so I was going to fit one of the chips into that and the other into the heatsink and fan I bought. This hought process lead me to go ad retrieve the old citizen LED and I thought I would try it. Still didn't work, then suddenly I thought it could be a simple blown fuse so I changed it aaaannnnd.....still doesn't work. doh! I started to remove the COB holder and COB from the heatsink (it was just glued to it using thermal compound) and when I laid it on the table I decided to test the driver without the COB holder on the tiny off chance it might work...nope I then realised maybe I got the + and - the wrong way round, tried again and boom works perfectly. The connection from the holder to the cob had bent slightly off contact. Really annoying that this whole time I could have doubled my photons to the plant, however, really nice that I don't have to spend a load more money on lighting in order to upgrade into the new room. So all I have to do now is spend money on a pre-drilled heatsink and a new metal COB holder for the citizen.