Likes
1
Share
Best bud I’ve grown to date hands down. Creamy cake terps + A heavy high!!
Likes
9
Share
Yes everything is fine looking to maybe try lst next time round with some.
Likes
34
Share
Candyman is now Day 22 of flower! The smells are beautiful 2 smell more gassy and one smells more lemon now. They are drinking a lot every 2 days now, I've took a lot of leaves off and lower bud spots to give the tops more energy the finish line is fast approaching now and I can't wait 😍 Day 26 of flower and they are stinking they smell like gassy shit 🤣 but my last run of skywalker did that and was unreal smoke, so 🤞🏻 Update: Day 78, Day 28 of flower! It's the start of week 4 today and the colours are starting to change 😍 smelling and getting frosty by the day now. Really can't wait to try these girls out ✌️🏻
Likes
2
Share
Como ha mostrado a lo laargo de estas semanas y meses, algo fuera de lo comun y en floracion no se queda atras. El color y grosor de tallos ya esta demas decir lo bien que andan, el olor (que es algo caracteristico de esta etapa de la planta) es muy fuerte y frutal. Estos pre-cogollos tienen una produccion de resina que esperemos se mantenga hasta el final....
Processing
Likes
10
Share
So the end is here. Its time, only damage from this point on, in this case.. I chopped her. She is hanging... strong pine smell with a little lemon. Not my favorite that's for sure.
Likes
2
Share
Likes
19
Share
This is my best auto flower grow so far. I’m kinda bummed I didn’t let her finish completely, I think she had about another week and a half left. She was just getting too big and barely any light was penetrating the other ladies I had vegging. She still gave me a great harvest and nice looking flowers.
Likes
4
Share
@trigs
Follow
She is starting to stretch into flower here, and this is where my notes stopped on 7/14/2023 until 8/13/2023. Switched to 24hrs to try to get some more growth out of her. Absolutely explosive growth and I am in shock. Been training her down with those LST clips and gently bending branches/the main cola.
Likes
4
Share
Processing
Likes
28
Share
I'm watering both of these plants 1 gallon ever 2 days. They're starting to build up!! As an overview You can see from the pictures that both are dealing with a little bit of heat stress. They are in a tent where all other plans love it hot and the temperatures are in the low eighties. if you look at the top leaves you can see canoeing my guess is it's heat. Other than that they're doing great #1 has shot up she stands nearly 12" tall now. this is the plant that we are letting grow completely natural no topping, No training. #2 on the other hand stands almost 8" tall and is much bushier, thicker, and squatter. You can see clearly in the video that we topped her and also are employing some low stress training to tie down her lower branches. both plants are beautiful and doing great! I expect #1 will be transplanted this week sometime #1 is 15" from the light #2 is 25" from it. Day 30: quickly measured because it looked like they grew a bit since watering Thursday. Definitely have too! #2 has easy gone up an inch. #1 is close to the limit of her pot I think.they both have asymmetrical growth 🤨 each have a branch on one side much taller than the other sides so I have begun rotating them daily to help light penetration. Day 31: Today I transplanted #1 she was in a 1Gal nursery pot for 31 day and starting to show some issues. I moved her into a 10x10 square nursery pot. Approximately 3gals. From here she will go into a 10Gal for flower in about 6 weeks!(I'm letting them get some size)Very faint yellowing of the leaves and needing to be watered daily. Attached is a video, showcasing her roots. Idk why, but everytime I transplant they look like the video. Everyone else seems to have an insane amount of roots.🤷‍♂️ #1s roots are some of the thickest I've seen tho, a regular tree! I transplanted using real growers recharge. That's about for today hope u had a great 4th!!🇺🇸🇺🇸🇺🇸 Day 33: Just a quick update today. Check the video I say more in that than here. #2 has nutrient burn from the recharge. These are such easy plants!! They need and want nothing! Water them once every 48 hrs or so and that's it! Im obviously going to back off on the recharge tho for then next couple waterings.✌️💚🌱 Day 35: Finishing off the week with a transplant. We put #2 into a 10"x10" nursery pot. Works out to be 3 weeks in the small 3 weeks in the medium then she goes into a 12gal for flower. I used Azos and real growers recharge during transplant Soil: fox farm happy frog Light: ES300 LED 18/6 on/off 2x4 vivosun tent 6" oscillating fan, 8"tunnel fan 6" inline duct fan Watering this week: pH 6.5 1 watering of real growers recharge Maggie's 3-1 garden spray preventative
Likes
18
Share
Started flushing. Buds are getting tough, most pistils are turning brown and some trichromes are already amber. I harvested the two bigger stems on Wednesday (because their sugar leaves were getting yellow and crispy) ; will harvest the rest of the plant on Saturday !
Likes
Comments
Share
@mihixd
Follow
only took pics on d62 this week D60 10L for 2 with calmag+bloom for smaller plants 10L for 2 with calmag+bloom+gs for bigger plants d62 big defo on 2 small plants
Likes
2
Share
Quarta settimana!! iniziano a vedersi i prefiori
Likes
12
Share
@Mousse
Follow
Lampe 100% Die drei Damen haben die 1m-Marke geknackt. 🌱🌱 Die GC hab ich rausgenommen – wegen des Platzes, aber auch, weil sie einfach übelst nachhing. 😅 Jetzt haben die anderen mehr Raum. Hab ein Netz eingezogen, um die Triebe besser zu verteilen und sie etwas von der Lampe wegzubekommen (nur noch ca. 23 cm Abstand zu den obersten!). Sonst alles mehr als stabil: Die Blattfarbe sieht super aus und die Buds werden schon deutlich dicker.💪🔥 Mo:(Fotos) Di: Gießen: 6L je nach Bedarf Dünger: Canna Coco A&B = 1,5 ml/L CalMag = 0,8 ml/L Cannazym = 0,8 ml/L Boost = 1,7 ml/L PK 13/14 = 0,7 pH: 6.03 EC: 1.89 Drain: Mi: Do: Gießen: 6L je nach Bedarf Dünger: Canna Coco A&B = 1 ,5ml/L CalMag = 0,8 ml/L Cannazym = 0,8 ml/L Boost = 1,7 ml/L PK 13/14 = 0,8 pH: 5.88 EC: 1.85 Drain: Fr: Sa: Gießen: 4L je Dünger: Canna Coco A&B = 1,5 ml/L CalMag = 0,8 ml/L Cannazym = 0,8 ml/L Boost = 2 ml/L PK 13/14 = 1 pH: 5.8 EC: 1.9 So: Gießen: 4L je Dünger: Canna Coco A&B = 1,5 ml/L CalMag = 0,8 ml/L Cannazym = 0,8 ml/L Boost = 2 ml/L PK 13/14 = 1 pH: 5.8 EC: 1.9
Likes
52
Share
I gave Isopropyl alcohol 70% equal parts water, 1 tsp cayenne, and kept enough for multiday application, what little population of aphids is left I shall catch them the next morning, opening the tent 10 min before lights on the clovers have yet to open, all the aphids hiding on undersides are easily visible, still none ever went near cannabis plant. Clovers are far tastier it seems. The alcohol kills on contact, the idea was to saturate the leaves with a light foliar application, and once I was done I ran it through the canopy with my hands making sure as much of the clover surface came in contact with the iso, once done turned on the fans and evaporate it quickly. Beautiful thing about Isopropyl is that it evaporates rapidly at room temperature way below boiling point leaving behind zero residual so nothing seeps its way into rootzones unless you spill it there. It is a magical solvent that leaves no trace that it was ever there. Resonant Frequency: A resonant frequency is the natural vibrating frequency of an object and is denoted as ‘f’ with a subscript zero (f0). When an object is in equilibrium with acting forces and can keep vibrating for a long time under perfect conditions, this phenomenon is resonance. In our daily life example of a resonant frequency is a pendulum. If we pull back the pendulum and leave, it will swing out and return at its resonant frequency. Objects combine to form a system, this system can have more than one resonance frequency. The resonant frequency is termed as the resonance frequency. The phenomena of resonant frequency used in the series circuit when the inductive reactance (XL) is equal to the capacitive reactance (XC). If the value of supply frequency is changed, we can observe that the value inductive reactance (XL) and capacitive reactance (XC) is also changed. Inductive reactance (XL) and capacitive reactance (XC) are inversely proportional to each other. When we increase the frequency, the value of XL increases, whereas the value of XC decreases. When we decrease the frequency, the value of XL decreases whereas the value of XC increases. At series resonance, when XL = XC. The mathematical equation of resonant frequency is: XL = 2πfL; XC = 1/2πfC XL = XC 2π f0L = 1/ 2πf0C ; f0=1/2π sqrt{LC} Where f0 is the resonant frequency, L is the inductance, C is the capacitance How to Calculate the Resonant Frequency of an Object? An object exposed to its resonant frequency can vibrate in symphony with the sound. The wavefronts pushing on the object will arrive at just the right time to push the object with greater and greater amplitude in each cycle. To get a clear idea of this concept one of the best examples is pushing a friend on a swing. If you push the swing randomly, the swing will not move very well but if you push the swing at a specific time, the swing will get higher and higher. Another example to find the resonant frequencies is to place the object next to a speaker and place a microphone attached to an oscilloscope next to the object. Then play the sound in the speaker at a given volume, and then without changing the volume slowly change the frequency. Now observe the oscilloscope, you will observe that at certain frequencies the amplitude of the wave, is proportional to the volume of the sound that the microphone is able to pick up. The frequency that is caught by the microphone will be greater than at surrounding frequencies. These are the resonant frequencies and are detectable as the sound energy absorbed by the object is re-emitted more efficiently at these frequencies. The precise moment that constructive interference happens the amplitude of the wave will spike at the precise frequency emitted. Q: Compute the resonant frequency of a circuit whose inductance is 25mH and capacitance is 5mu F? A: Known values are, L = 25mH = 25 x 10-3 H C = 5mu F = 5 x 10-6 F Formula for resonant frequency is, f0= 1/2π sqrt{LC}1/2π√L f0=1/2 ͯ 3.14√ (25 ͯ 10-3 ͯ 5 ͯ 10-6) = 450.384Hz Why Neodymium? Ferromagnetism is an exciting phenomenon observed in certain materials, known as ferromagnetic materials, that can retain their magnetization even after removing an external magnetic field. Ferromagnetic materials can become ferromagnets and interact strongly with other magnets and magnetic fields. A characteristic of ferromagnetic materials is their magnetization ability, distinguishing them from paramagnetic and diamagnetic materials, where weak magnetism exists temporarily. This unique property allows for making permanent magnets widely used in various applications such as motors, generators, speakers, and data storage devices. The ability to generate and maintain a magnetic field without the need for a constant external source of power makes ferromagnets highly valuable. An alloy of neodymium, iron, and boron discovered in the 1980s is ferromagnetic, yielding permanent magnets over 1000 times stronger than anything ever seen before. The name neodymium comes from the Greek neos didumous, which means "new twin." Neodymium magnets are made of an alloy of neodymium, boron, and iron. This allows them to simultaneously store impressive amounts of magnetic energy while being highly resistant to demagnetization. Because iron oxidizes quickly, neodymium magnets are coated to prevent rust from accumulating. The attraction between two neodymium magnets is so strong that if placed close enough together, they can collide and shatter. Neodymium magnets have an unusually high-temperature resistance, and they can even withstand heat exceeding 200 degrees Celsius. N50UH 1-1/2"OD x 1.065"ID x 3/8"
Likes
2
Share
5 th Element Vision by HASSE Create Your Own Style
Likes
44
Share
Info: Unfortunately, I had to find out that my account is used for fake pages in social media. I am only active here on growdiaries. I am not on facebook instagram twitter etc All accounts except this one are fake. Hey everyone :-) Another nice week goes by and it is slowly becoming a bush from training 😊. This week it was poured 2 times with 1 l each time (For nutrients, see the nutrient table above). She was trained once again with topping. You still have some time until it blooms until space is free :-). Otherwise everything was checked and cleaned like every day. Have fun with the update and stay healthy 🙏🏻 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. You can buy this Strain at https://www.amsterdamgenetics.com/product/super-silver-haze/ Type: Super Silver Haze ☝️🏼 Genetics: Haze x Skunk #1 x Northern Lights Type: 70% Sativa – 30% Indica 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Nutrients : Green Buzz Liquids : Organic Grow Liquid Organic Bloom Liquid Organic more PK More Roots Fast Buds Humic Acid Plus Growzyme Big Fruits Clean Fruits Cal / Mag Organic Ph - Pulver ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8
Likes
5
Share
Under new light 1000w phlizon and loving it started flower around day 28