Great week so far :) will start some LST at the end of this week and be adding cal mag and some 1/4 strength bloom micro grow and then starting bud candy the following cycle :) Also have a nice little 3 leaf going ;p

Well I starved her for two weeks with some low PPM/low N, and bumped here back into an equilibrium last night at 400 ppm. PH stable through the night with a ppm drop. Fingers crossed for a manageable week 7. This plant pre-flowered mid-week 3 and she has flowered up quite a bit more than the other hydro auto grows I've done. Maybe a nice yield, or maybe a quick finish? I'm patient ... She hasn’t grown much at all last few days I’m guessing she’ll land 18” tall which is not good for my fixed light set up. Will need to rig the hangers in there somehow.

Idhdb

Chopped her two days into week 14. What else. Buds. There are a lot of them. And they are quite large. And they look like they will require little effort to trim. What more can I wish for? I am a very happy man. Upd 1: Trimming is SO SIMPLE! Not much sticking out to begin with, because of the amazing bud structure and me plucking most bud node fans. Solid nugs which are not bothered by anything, so pulling smaller sub-bud fans is very simple too, while the buds are what I would call moist. I'll call this Moist Trim 😄 ✂️✂️✂️ Went for the best trimming tools available on the market (well at least my research concluded so) and LOVING every minute of trimming with the B-500SRF. Why would I or anyone else use something less suitable or less comfortable for such a delicate and long job is beyond me, except if you cannot afford one right now, in which case I wish you to experience it one day. Fiskars are also very good in therms of the blades, coating and cutting ability and precision, but the spring is just too stiff, like way, way to stiff for something that is to be used for hours on end. One might argue that such spring force helps overcome resin buildup, but please just rinse your instrument regularly in an appropriate solvent (ethy, iso, whatever — consider you instrument materials as well) and wipe it after. Why would you let significant amounts of resin to accumulate on such a gentle and precise tool? Kinda defeats the purpose?

Soooo I chopped the cripple a week before and got 40G dry out of it. Im excited how much the bigger one will yield cause shes looking better and better with every day passing.

This harvest was my first true harvest. I worked on coco choir for the first tiem and it was really easy and I will work again in the future with coco choir and fabric pots. The strain was really easy to grow and could handle stress pretty well. I would advise against transplanting and maybe giving her less N during early flower. I am really proud for this girl! I cant wait to smoke her. edit: Dried under the sun and smoked just to test it with some friends and we all loved it. Strong taste and smell and a very strong sativa high the rest will cure for a month after drying. I will do another smoke report in a week!

Hi dear smokers and growers!! 😎 Chilling Racoons here 😏 We will show you one of the new genetics of Royal Queen Seeds, the Milky Way F1 Automatic! 🤩 F1 seeds have unparalleled uniformity, impressive resistance to disease, great productivity and flavours and effects that will inspire you to grow these seeds again and again. So we are sure to grow big and stable plants, we have only to cure them well!! We are excited to try the Royal Queen Fertilizers like the tablets and the easy boost! They will give a big kick to our plants 🤩 🤩 🤩 We posted some of the RQS Ferts and Merchandising, look at the stuff, I am happy like a child 🤤 Royal Queen Seeds is one of the biggest seed bank in the world, in addition to a wide variety of high quality seeds, on their site you will find many accessories for growers and smokers. Take a look to our friends! https://www.royalqueenseeds.com ✅ 🌱#1 WEEK VEGETATIVE🌱 💉🔍Fertilization schedule:🔍💉 📅 EASY BOOST MIXED TO THE SOIL 50g/pot Both seeds germinated in 48H, after the root came out, we immediately planted the seed in the soil. We are growing MILKY WAY AUTO #1 in a 11L Plastic Pot and the MILKY WAY AUTO #2 in 15L Smart Pot. Seeds are directly planted in the final pot to avoid transplant stress. We planted these seeds in different pots to see if there are difference in growing and yield. Germination rate: 100%, Royal Queen, what a pleasure to grow their seeds. 🧐 🤓 Milky Way F1 data sheet 🧐 🤓 Variety: F1 Hybrid auto Genetic Background: Blue Mammoth x Blue Dream x Sin Tra Bajo Auto THC: Very high Yield: XXL Height: 55 - 75 cm Flowering time: 42 - 45 days Harvest: 70 - 75 days after germination Major terpenes: Farnesene, Myrcene, Pinene Effect: Creative, Euphoric, Physically Relaxing Flavor: Chocolate, Citrus, Pungent, Skunk Climate: Short Summers 💸💸💸💸💸 Buy Milky Way F1: https://www.royalqueenseeds.com/uk/f1-hybrid-cannabis-seeds/617-milky-way-f1.html _____________________________________________________________________ OUR GERMINATION METHOD STEP BY STEP We germinate all seeds in cotton pads because in my opinion is the best way, I'll tell you why. You should use cotton pads because it is one of the fastest way to germinate seeds, it is also one of the more reliable way because with these few steps, you could have a 99% of success if seeds are fresh (we store our seeds in a dark and sealed container in the fridge and they last years!). This is a NOOB-FRIENDLY technique BUT you have to respect some little and easy steps: 1️⃣take one cotton pad, spray it 5 times with water; 2️⃣dispose seeds in the sprayed cotton pad, remember to leave minimum 1cm of space between seeds, 3️⃣take a new cotton pad, spray it 3 times with water, face the wet side down and put it on the seeds of the first cotton pad; 4️⃣spray the dry side 3 times. 5️⃣put your "sandwich/es" in a sealed dark container of a sufficient size to store them, I use a plastic container (glass or plastic are equal) with about this size: 15x30cm .It contains about 8 "sandwitches". 6️⃣store the container in a dark place with a temperature from 17°C (23/24 °C are optimal)and more. REMEMBER: More light they see and colder is the place,slower will be the germination and lower will be the germination ratio. *(If your seeds are old, not good stored and with a low germination ratio, I suggest you to use Seed Booster. Old seeds and maybe stored in a very hot place for a long time may will be death and may will not never germinate). Generally a normal cotton pad is good for 3 seeds. If you follow these steps, you will hardly have problem of non-germinating seeds. I tried all methods (except rockwool cube) and in the last two years (and I germinated a lot of seeds) I can tell this is the fastest and reliable way. I loved to use paper towel but with this method is very easy to put too much water... I really hope that this "rule" will help all growers to improve their skills. ENJOY. _______________________________________________________________________ 🔧💡OUR SET UP💡🔧 ✔️ 💲💲💲VIPARSPECTRA 🚀🚀🚀🌕🌕 ViparSpectra®️ XS2000 240W Infrared Full Spectrum LED Grow Light: Excellent ratio between wattage and ppfd, excellent light penetraton, perfect light spectrum (it also has IR 🤩) and it has the best build quality on the market. You can touch that quality. Materials are really strong, excellent driver and the best leds on the market. Heat dissipation is perfect, the lamp is never too hot and it has a passive dissipator so you will have zero noise. It also has IP65 certification. I like that this lamp is bigger than others, so the 240w of power are well distribuited on the space. Viparspectra has an awesome customer service, and shipping was incredibly fast! This awesome brand also offers 3 years warranty. This lamp has no rivals. A special thanks Viparspectra ❤️❤️❤️❤️ HERE YOU CAN BUY THIS PROFESSIONAL LIGHT: https://www.viparspectra.com/products/xs-series-xs2000 or https://amzn.to/3dyUoJl and here you can buy other awesome stuff: https://www.viparspectra.com ✔️ 💲💲💲MARSHYDRO 🚀🚀🚀🌕🌕 💡TS 600 FULL SPECTRUM 100W LED GROW LIGHT : with this light you will achieve excellent buds, you will not need anything more. This lamp replace a 150w HPS lamp, but, with this Led Light you will smoke bigger, harder and tastier buds because Led have a complete spectrum and a powerful light penetration, so your plants will work as much as possible to make you happy. Psssssss it it extremely cheap and it is only 100w, your bills will never be too high, YOU HAVE NO EXCUSES!! Here if you want this little beast: https://www.mars-hydro.com/led-grow-light/mars-ts-series-led-grow-light/mars-tsw-600-led-full-spectrum-hydroponic-led-grow-light Thank you Marshydro❤️❤️❤️❤️ 💣Quantum board - 480w - 4x120w Boards Samsung LM301B 288 led/board 3000K 0dB noise +24led/board led Osram 660nm Efficiency 2.6 umol/J 220 lm/w Driver: Meanwell HLG-480H-36B 💣Quantum board - 240w - 2x120w Boards Samsung LM301H 504 led 3500K 0dB noise +24led/board led Osram 660nm Efficiency 2.7 umol/J 220 lm/w Driver: Meanwell HLG-240H-48B -ESTRACTION FAN: Blauberg 125 Turbo Pro Series Maximum air flow: 430-560 m³ / h 50W 32-44 dBA 💊💉💊FEEDINGS TOP CROP: -DEEPER UNDERGROUND: to stimulate roots system -TOP VEG: for an excellent growth in the vegetative phase -GREEN EXPLOSION: to promote creation of bud sites and to allow a faster growth -MICRO VITA: bacterias for equilibrate the soil and to make the plant healty -BIG ONE: to stimulate bud sites and to stimulate resin production -TOP BLOOM: to achieve excellent big and hard buds -TOP CANDY: to feed the buds with molasses for a tastier smoke and to gain weight -TOP BUD: to enlarge buds and to gain weight PLAGRON: PK 13-14 to have big and hard buds and to feed plants with lower effort ADVANCED NUTRIENTS: Sensi Cal-Mag Extra-> for cal mag deficiency GROTEK: CAL MAG for cal mag deficiency HESI: PowerZyme to clean and balance the soil. It feeds the plant cleaning the soil. GHE: - Final Part (ex Ripen) accelerate the final flowering phase, dissolves minerals in excess - Flash Clean to flush the plant and to be sure that all excesses are out from plant and pot These two products improve A LOT the smoke of our babies -PURPINATOR to stimulate flavonoids and to have a better taste and smell. -BIOBIZZ: CAL-MAG, great product to correct deficiencies without Nitrogen! ____________________________________________________________________________________________ 🙏❤️ THANK YOU FOR BEING HERE ❤️🙏 Please leave a comment with your opinions, it is very important to us to have a comparison. If you like our job, tap the weed button and follow us. It will be really appreciated.🙏 We want to thank again everyone that help us in our project. You support us to support our dream. ❤️ SPREAD THE LOVE OF THIS PLANT ALL AROUND THE WORLD 🌿Thank you again🌿 ❤️Sweet hugs❤️ 👨‍🌾CHILLING_RACOONS👩‍🌾

Hello Growers and Tokers! 👋 👩‍🌾 🧑‍🌾.🔥💨 Sorry for the delay on the weekly updates, had some things I had to attend but I'm back and at it! 21-day defoliation has come.. These pictures were taken on day 20 of flower As you can see in the pictures I did a little defoliation of the bigger fan leaves. She's pretty advanced compared to the other ladies. Buds sites are formed, strong aroma going. Her structure looks like a straight up garden bush. Took the LST great ended up with a nice open, spread canopy. With the defoliation done, buds will be getting much more light exposure and grow a bit more before gaining weight. Really happy with the results so far with this strain. That's it for this week One love!

The buds are pretty dense and super sticky! I went through a whole box of gloves lol 😂 Terp-wise, it’s lemony and earthy… the kind of strain where just smelling it, you already know it’s gonna hit hard 🔥🍋

GREAT GROW OVERALL! More to come!

Last week of the apple fritter.. As Im writing this I already harvested it. Ill report back in 2 weeks after the drying and before the curing. This was an amazing journey that its not yet finished. Drying and curing is very important and ill be doing the following: Drying Environment: - Temperature: Maintain between 18-22°C (65-72°F). This prevents terpenes from degrading while slowing the drying process. - Humidity: Aim for 50-60% relative humidity to avoid mold and overly crispy buds. - Airflow: Use a small fan to keep air circulating, but don’t let it blow directly on the buds to avoid uneven drying. - Darkness: Keep the tent as dark as possible. Light can degrade cannabinoids like THC. - Timeframe: Drying typically takes 7-14 days. Stems should snap (not bend) when drying is complete. Curing: - Jar Storage: Once the buds are dry, ill trim them again properly - Humidity Packs: Using Boveda packs (58-62%) to maintain proper curing humidity inside jars. - Burping: For the first 2 weeks, open jars for 10-15 minutes daily to release excess moisture and allow fresh air in. Afterward, reduce burping to once a week for long-term storage. - Curing Time: At least 2 weeks minimum.. Ill comeback soon with final dry weight. Wet was 400g. Keep up the good work galera 💜

Great starter plant for a first timer was easy all round she stayed short but stocky rock hard dence nugs

Day 1 , week 5. As i was going trough the tent i said their names so raise the volume. Remo chemo is absolute beast so far..

1 day of week 4 in flower She is huge and looking really good.. Cant wait to smoke this wunder.. and se hear beautifol buds coming out. The Frost is coming out As you can se hope yall enjoy have a good one 😎

Hello. Please read week 1 for the plant description It's been a quite week round here.. Just the normal type of cannabis growing week. I noticed that some of the leaves are going yellow a little earlier than I would like so I gave each plant about an 1/8 of a cup of Blood/Bone meal 7/7/0 and watered it in. I didn't want to give too much nitrogen at this point in flowering, but just a little so the plant will stop feeding on itself and turning it's leave's yellow to soon. I came across some very aggressive white powdery fungus/mold on one bud of plant #1. As I examined it I saw that it wasn't the normal powdery mildew that I had been battling here for years. This had a white circle and was domed. One on the domes had dislodged a few mm and stuck there. Another had a small tendril growing out of it across the leaf and off the edge a bit. I just happened to have experience with this one. About 6 years ago I was over at a buddy's and he had a Super Kush by B.C.S.C. growing a few feet away from his humming bird feeder. He said I could take a few clippings. I put them in water overnight and was going to clone in the morning. In the morning I found this white fungus/mold on several leaves. I cut the leaves off and worried over the next few weeks as the plant was forming roots that the fungus would return. It never did return and the white stuff I found this week has not returned yet either. The bud that was affected was right under the roof vent and I have lots of hummingbird flowering plants and shrubs around the house and one probably pooped as it flew over the greenhouse. Seeing how they eat sweet sugar water and nectar with some insect proteins thrown in, they must have some powerful stomach bacteria in their tummies. I plan to flush the first 2 weeks of August and harvest around the 15. Till then. Chuck.

Sie ist kurz vor der Blüten was kann ich bloß sagen einfach wunderschön

Time for the stretch! Lots of flowering growth happening now. I can see where the bud spots will be so I’m going to have to stop moving the branching around in the Scrog, also the branches are getting thick and less pliable.