Here we go, 4 days before harvest time. Last 2 days, light will be off. Cant wait to cut those ladies down :)

Beginning of week 8 and seems like a long way to go. Most of the hairs still white. Hopefully the buds will fill in more! As right now I’m planning to take it 10+ weeks. This week I will lower the CO2 slowly 50 PPM every day until I will reach 800PPM. Also I will lower the light intensity by 2% every day. This week I lowered the day temp to 79 degrees and next week I’m playing to lower it every further to 76 degrees Fahrenheit. Water temp is at 68 degrees and probably from week 9 I will lower it to 66. Beginning of week 8 TDS is at 550PPM. I sent adding the Late bloom enhancer from Current Culture! End of week 8 : lowered the TDS to 470ppm , she seems that it not eating so much nutrients anymore. She still drinking 3 gallons of water every single day.

I am really happy that the plant is so beautiful. I am 100% sure that in better conditions it can give even more, now there is little time left to harvest. bye growers OKeyyy now the harvest day is 23/05! i love this strain ! looking for the second plant ;D

All ready for 12/12

Todas desprenden un olor hermoso gracias al Lixi, Le falta engorde a los cogollos esta vez se quedaron chicos, vamos a priorizar el sabor.

Va tutto bene, credo che siano meno di 20 giorni e dovrebbero entrare in prefioritura nel giro di qualche giorno altro Dovrei eliminare qualche foglia parasole?? O lascereste così?!

The little one is catching up and the bigger one is starting to fill out the net

It is tiny, but looks amazing. And smell fuel.

Amazon jungle 💁‍♂️

Grape soda, tropical punch, and gasoline. These rock hard flowers were some of the prettiest to watch grow I've ever seen.

Was seeing plenty of cloudy to amber trichromes. Sticky. It was time. I’m wondering if there is a chance I can reveg this plant.

The Apple Betty girls have performed very well this week! The LST began, and there was some great growth in side branching. I also started this week off with introducing them to some nutrients ❤️ Start of week 4, the girls had responded well to transplanting, so I decided to start with some LST. My main method is to use soft wire wraps (dollar store purchase!) I poke one hole in the side of the pot near the top, and then go directly opposite that hole and poke through to make another. The first hole is for a wire wrap to secure the base of the seedling from pulling right out or over too far. The other hole is for the direction you want to bend your plant to. I start by slowly working the stem between my fingers at the point where I want it to bend. Twisting and pinching slowly so not to snap. *wait a day or two after your last water, or it will be easier to snap* once it’s ready to flop, I use the wire tie to hold down the top of the plant as close as I can to the nearest shoots. I’ll usually leave the plant like this for a couple of days, adjusting the ties, and then take them off to let them recover . Watered with a small dose of the full line of Advanced Nutrients I will be using for this grow. The girls got about 500 ml at the beginning of the week, but 2 days in I could tell they wanted more. By the end of the week they are taking nearly 1/2 gallon (which will give me 10% runoff) At the end of the week I increased the intensity of the BP2500 to 190 watts at the wall and the girls did show a few wrinkles as they adjusted, but have quickly recovered. I haven’t topped these girls, and I’m not sure if I am going to… thoughts? Happy Gardening 🇨🇦❤️🌱😎💨

Day 39 - Watered the Gold Leaf today by dunking it. 8.4 PH going in and 6.3 for the runoff. The PPM was only 500 or so, but I'm guessing it is because of the dunk. The soil test was still 5.3 on one side and up to 5.7 on the other. I checked right away so maybe it has gone up. GDP #1 seems to need water, but GDP #2 will need another day. The Gold Leaf is reaching the 25" limit for flipping, but the net should help show things down a little so the other 2 can catch up. Day 40 - Both GDPs needed water and got dunked. PH was 8.5 and the runoff showed 6.2. A soil PH check came back at 5.9. I am hoping that the small jump will help. I realized I would not be able to test the runoff with the stand and saucers I was using so i got new ones. This lowered my potential flipping height, but with the SCROG I am hoping to keep the goldleaf down long enough for the GDP to catch up. Day 41 - The Gold leaf is tall enough to bend down and the GDPs are almost there. I'm anxious to see how many bud sites I can get through the net before I defoliate and flip to flower. I don't think I should wait much longer with 3 plants in a 2x4 and the gold leaf getting close to 25 inches. Day 42 - 2x4 is too crowded so decided to order a 5x5 and move them over before I flip to flower. The gold Leaf is dry again. Watering with 3 gallons to try and get the PH up and the PPM down. The PH of the water I am using is 7.5 Day 43 - Watered Gold Leaf today. Going in the PH was 7.5 and the PPM 250. The runoff showed 5.9 and the PPM was 870. The soil test after work showed on one side as 6.1 and the other 6.0. Getting better, but I want to be closer to 6.5 before I flip them. The 5x5 tent will give me the room needed for that. Day 44 - Watered the GDPs today. The water going in had a PH of 7.5. The PPM was around 255. The runoff had a PH of 6.2 and a PPM of over 850. Both were very similar. At least one more week without nutes unless there is a problem. The ladies all seem to be showing a bit of magnesium deficiency. I started using a foliar spray for now with 1ml cal mag in 500ml of water with a PH of 6.5. Might need to add cal-mag to the next watering. The 2x4 is way too crowded with the 3 of them in there together. Hopefully the new tent shows up soon. Day 45 - The Gold Leaf is getting worse. It looks like lockout again. The other side of the spectrum this time. Probably too alkaline... 😒 From now on I will be feeding with water with a PH of 6.5. For now I added a few drops of micro and bloom to the foliar spray and applied it once more. It seems like it will need more water in a day or two so that should help.

It’s still drying but i pulled a few nugs to start the cure. I still have one plant up, it’s seeded and working hard on seed production. Keeping alive as long as needed.

Week 5! Blue Dream is looking nice, bud sites are developing nicely and the plant looks healthy. No complaints with how she did over the last week, she's not as hungry as the GG4.

Already week 7, and it’s starting with much better air humidity which makes it easier for me to stay in the recommended VPD range – currently 54% at 25 °C at canopy height. With 58, 67, 78 and 80 cm plants’ average height is about 71 cm. Odour has increased, and sometimes, but only shortly, I get the feeling the coal before the blowers cannot eliminate all of it. While the smell was a bit strange sometimes one and a half week ago, it’s now absolutely yummy, sweet and promising. As is all the sticky stuff adhering to my folding rule when I measure their size. I am a bit confused about the amount of yellowing leaves. That would indicate a nutrition deficit. On the other hand, last feeding (yesterday it was only calmagged water) brought some brown edges to their tips as I wrote. Which could indicate a slight over-nutrition. I am not *that* worried as leaves around the buds all look great (except for mentioned, but not youngest tips), and mature plants obviously tend to concentrate on bud production solely. But week 7 is quite early, or isn’t it? Any recommendations? Maybe I should go with organic fertiliser next time to avoid being stuck between two options ;) As they had run dry already, I gave each one another round of drink. Slightly less fertilised than last week. And I removed the lowest yellow branches and tiny buds that would not make it into the light in time. The Pineapples must have some mimosa genes crossed in. Each time I touch them they bow away their heads in deep dislike. The taller one looks like her head would be too heavy now … It is not, and usually they recover after an hour or so. The Sherbets are pretty unimpressed by all I do. Meanwhile I’ve been working on the Raspberry Pi BoxControl that should help me stay in better VPD ranges in the future. I am not sure how to translate this all into a more stable solution than based on a breadboard, but the state so far (and how it is supposed to work): Raspi runs headless with control software on autostart. Every minute temperature and humidity are received from a GY-21 I2C chip that should be hanging around plant tops. Data is saved in a database, VPD is calculated and signalled in form of a RGB LED color. Additionally, LCD display rotates through current stats. 3 relay modules can en- or disable misting, dehydration or an additional blower. Maybe I can add a CO2 sensor just for the fun of it (but I’d have to develop a device protocol myself), maybe even one or two soil moisture sensors. Theoretically you could also have a lighting control, but then, GPIO ports are all used. The display needs a lot of them, and while I can log onto the Raspi on my local network and view its desktop, I’d prefer to have a quick overview at place. I am not really informed about current models. Are some GPIO extensions or Raspis with extended GPIOs on the market? But so far, that’s all theory. I never had a PCB developed for my hobbyist projects, I am not the best with a solder station. Never had a Raspi run 24/7 for a really long time. Did a bit more lollipop ping in the evening. Especially tallest Shepard had fun building some more very low buds and branches. I think it can investigate its powers better on different places. Day 51: It’s getting hard to measure soil humidity with my low tech device. Soil must be full with roots and I don’t want to hurt them much. I can see them at the outlets of their pots too, sometimes a bit dry of course as these parts run dry earliest. Experiments to include the CO2 sensor in my test setup failed. I can read and reset it, but setting measurement mode and reading values don’t work. Maybe because my I2C library cannot use ClockStretchLimit. Running out of GPIO ports anyway and seeing that the soil sensors are analogue devices, I’ll probably revive my Uno too and have discovered some clever Raspi heads that should make a more stable setup (and some cooling) possible while also adding a handful of PWM ports and an integrated display. I’d like to include a camera module too and it would be great to have some ports available. A final setup would obviously include a Raspi 4 or 5 to easily enable secure online access. But so far, all working nicely in test setup. Day 54: Sometimes I wonder if they’re still growing at all, but then it’s good to have the daily pictures to compare bud width which now seems to be the main interest of the ladies, although differences are now clearer to tell between two day intervals. The taller ones look like they are one week ahead of the smaller plants, with even higher fan leaves turning pale now. Which at an estimated seed–harvest time of 8–11 weeks for both strains should be pretty common, I guess. Or am I wrong? Summerly temperatures make the temperatures at canopy level sometimes reach 31 °C, but at least the simple ultrasonic diffusers arrived and I am getting closer to a better environment control. I can at least switch the diffuser inside the tent remotely from my phone, and a deep bowl of water with a lid so the "fountain" produced will not wet the tent floor and one of the fans placed at the bottom now to lift its mist upwards seems to do the trick. Humidity increases while temperature drops, getting the plants into a better VPD level, so all I have to do is wait for the evil A to deliver the necessary Raspi components to have this automated, maybe still while this grow runs. At the end of this week, there was just a bit of height gain for the two smaller ladies who now approach their next 10 cm mark. Overall, I get the feeling it won’t be that long until harvest. Maybe with the taller ones a week earlier than the others. There’s really not that much bud growth anymore, rather refinements – like buds getting more nodes and color. I’ll investigate the trichomes every few days but would welcome your estimation.

Han llegado a 1 metro de altura sin contar la maceta. Riego día si día no, están bebiendo entre 1litro y 1,25. Empiezo con canna flush para ayudar a la limpieza de raíces ya que me es imposible sacarlas del scrog para regar y drenar. Desde ahora solo agua. La planta que tuvo un comienzo amorfo (al fondo a la izquierda), es la única sin apical ni FIM, parece que va un poco detrás de la maduración respecto a sus hermanas con apical/FIM. En unos 10 días más o menos cosecharé las que estén maduras.