Gorilla Zkittlez Boss Hogg 818 Headband
Commencing week 3/Day 15 on November 7th* My 🍋 🍰 (Lemon Cake) & 🌻💣 (Flower Bomb) cross stock/stash has been transferred into foam cups with Pro-Mix. Light water with spring water and misting and they look like happy babies under the same lights in my parlor/living room they have been under since being sown. After transplanting the personal stock; I moved the germination tray and dome along with the remaining GZs, BHs, 818s, and RD into the basement aka 'grow area' to acclimate: as this will be their new home. This basement is my hydroponic grow area and has a much lower ambient temperature - which is great for flowering - but can be tricky with vegging depending on how this winter 2018 treats us New Englanders. We shall see. Also the humidity is harder to control but I believe this year I am better prepared to manage optimally. So now in order to follow along I must explain this. I have separated the seeds doc from my own and the feminized ones I have paid for. The stats reflected in the diary that you will now see Will Follow the hydro setup but I will continue to explain in the comment section the soil grow up stairs stats. Day 15 my personal stock will remain upstairs underneath the 600 watt umbrella Hood that is dialed down to 250 Watts. (Which is shared with house plants). The lighting shedule here is 12/12. the intention here is to basically treat them as houseplants and be happy with whatever I get while I take note of phenotype variation and maybe hopefully I'll find a keeper or two 😄 They are now in one quart size foam cups of Pro-mix. the ambient temperature is 75 degrees and the humidity stays around 55. Day 15 my paid for/professionally bred seedlings were acclimated to their new environment in the basement for a little while and then transplanted into their new outfits: 3.5 gallon deep water culture (DWC) buckets with 6 inch net pots, lava rock medium and regular 2 inch airstones. These plants are under a predominantly T5 lighting with the exception of two being under T5 and a diamond series LED with flowering Spectrum turned completely off and vegging Spectrum dial down to only 50 Watts. The lighting plan here is to keep them under 24 hours for just a few days. Day18 the Gorillaz are beastly little things. They are growing the fastest and largest. The Boss and the Raspberry are close behind the GZ and tied for second place. The 818's still seem to be runt-like. Otherwise all in the hydro looks healthy. Also last night I put timers on so the plants are getting 16/8 (in the form of 8hrs on followed by 4hrs off. This happens 2x per 24hr day. Reason being that I've read the rate of photosynthesis peaks at 6hrs and then descends) lastly I've been PHing daily down stairs only making minor adjustments and keeping the PPM between 550-600 ppms Day18 the Parlor stock is still doing well also. I've noticed this so far as differences:. The leafs are smaller and darker then the basement strains. And there seems to be more stem growth, or maybe stretch. Otherwise these plants are rivals the others in size. Except for the 2 🍋 🍰 seedling that popped open almost a week after the others. Day 21Nov21 - the PH is staying nice around 5.8 for 3 days now with no minor adjustments. Removed all mini plant stakes (ie paperclips etc lol), little baby seedlings no longer need help staying propped up. Root hairs are poking out in every direction of Root Riot cubes, (see video) excited because once those roots hit the waterrrrrrrr 💣boom explosive growth! As far as growth goes all three GZ still in lead. I might even have one early starting purple💜 🦍 baby (see pic of GZ2 DAY 21) *This is day 15 from seeds being sown on Oct 22nd, not popped open and or tap root showing etc.
8set Mainline & 6/4set Manifold in Auto Pot - Selfie Seeds Sweet Slurry x Sugar Cane (6X4)
Week 6 At the beginning of the week I simply finger pressed the new node growth to begin separation and branch direction. 3 days after the last topping, I set up the tomato rings and attempted to tie down train the branches. In retrospect I should have given another day of growth before trying to tie to the new nodes. One plant made the LST training without issues(green tomato ring), however I snapped 2 center colas on the second plant(orange tomato ring). From experience I know that these will not produce tall colas since it happened so late in Veg, so I decided to completely remove them and will monitor for any new growth on those nodes to remove it. So now Im growing an 8set Mainline And a 6/4 set Manifold: Mainline : is a planned topping and defoliation of every cola that makes all topped splits have roughly the same distance to the roots for water ways by removing all other growth along at the same point on any cola. Ideally this helps generate mostly equal buds along the whole cola after each topped split and then the whole plant without having to use scrog nets and just local support ties instead. In a Mainline you remove any other growth that would otherwise need those water ways to grow as well, so Manifold: is the same thing as Mainline but in Manifold you leave a few branches to grow from a lower start point on any cola and then remove everything else. Ideally this gives mostly the same benefit as Mainline but if planned correctly allows you to be finished topping in just 2 separate topping days rather than 3 separate topping days. (I am using it here to correct this late veg mistake in my breaks) The tie downs are positioning 6 of the colas to grow out flat until it can reach the outer bend of the tomato rings where I will allow them to stretch straight up in bloom. 2 cof the colas will have the lowest node of braches growing up in the middle for a total of 4 branches. However in the 8 cola plant I am also training 6 to the outer ring and 2 colas to grow up in the center of the ring. Feed this week was again an auto pot reservoir feed at 400ppm total before add-ins. I used 360ppm Veg concentrate mix (recipe week 2) and 40ppm Bloom concentrate mix (recipe above). However, I also added 1ml/gal of CaliMagic (General Hydroponics 1-0-0) to all feeds and ph balance this week was for 6.3. Next week will consist of more LST training with a simple move of the wires as needed. Feed will increase in total ppm and bloom mix and I plan to reduce ph to the 5.8 range slowly, so about 6.1 this week and 5.9 next before flip on week 9.
shorts_status_processing
Zeus Re-veg clone
Starting to see signs of flowering started transitional bloom nutes.
Channel, red dragon, White widow, Nicole
Megawatts
@Megawatts
Volgen
Terceira semana de vegetativo Master grow a+b Complex b Iluminação cob cree cxb3590 driver 60w Ppm 1300 Ph 5.8 Defensivos alternados Bio Block ( fat crystal) Enxofre Calda bordalesa Vegetativo em geladeira Vasos de 1.7l
LemonPaya
Critical auto
PRIMER CULTIVO INDOOR
EtnoGrow
@EtnoGrow
Volgen
well everything is going well without pests without at least not noticeable or minimal deficiencies surely, which leaves us calm, potassium soap and neem oil were purchased but it was not applied at the end, it will be the next one, after this pruning work a new one was installed scrog mesh and as you can see we also did with some or one at least the 2nd largest an attempt at sog, so it's like a mixture, then this big ugly mesh, we change it for an ideal girl what we want is that it doesn't grow too much in that The mesh helps us, well, we also change and go to flowering officially when we see that the plant is already flowering by itself, we spread a little so that the small 5 small pots grow a little more, the intensive pruning is to compensate for the ventilation that The temperatures may still be somewhat high, the air circulation in general, my closet is 60x60x160cm, so it comes in handy, it seems to me that we have carried out a good sativa plant by taming it in such a small space and it is I am proud, in addition to having the other copies as well, I hope I have taken advantage of the space and the light as best as possible, that was the idea.
Frappe Late Z  4 / FC-E4800 / 90x60x140
Girl Scout Cookies FEM - Indoor
She's been the bushiest plant so far. I'm excited for this girl. I topped and defoliated every plant. I'm trying to form them into canna-bushes. Hopefully I'm doing the correct training procedures to make them all grow that way both indoors and out.
Wedding cake auto & Strawberry gorilla
draco38
@draco38
Volgen
Settimane 10 di fioritura iniziata e hanno un profumo buonissimo e forte, a fine di questa settimana vedrò se raccogliere o aspettare un’altra settimana poiché i fiori in basso non sono ancora abbastanza maturi. Questa è la mia prima esperienza e so di aver commesso errori ma le piante hanno comunque resistito. Avrei bisogno di qualche consiglio per capire se dopo questa settimana devo raccogliere oppure no. Ciao a tutti
Chimera ✂️
Eccoci di nuovo qui!!! Super eccitato per questa nuova collab con Anesia Seeds, team davvero al top, che mi ha dato l’opportunità di testare questa nuova genetica e di condividere i progressi con tutti voi!!! Come sempre partiamo nei bicchieri per poi travasare.. Questa volta verrà svolto tutto sotto la Lumatek Zeus 465 ProC, mi aspetto molto da questo ciclo!! Purtroppo ho perso i file delle scorse settimane e dovrò reiniziare il report da ora scusate per il disagio Grazie a tutti per il supporto ❤️🍀🔥
YODA SODA-by VADAR OG
1/20/2023- So much to do pre grow and over the next 16 days, absolute first order of business is that I have to take down my current Grow---TIMBER-- Then I have a list of things I have to get done in order to be ready to start this grow 1 Feb. With that said T - 2 days until start 48 hour Flush T - 2 days until Start 48 hours of Light T - 4 days until TIMBER!!! Items that need to be done before 1 Feb 2023 1. I need to clean the tent out 2. I need to clean the equipment- Proper Sanitization between grows in Hydro is a must!!! 3. I need to get the hole in the ceiling above my tent repaired- For my last grow I had a deep sink installed in my grow room, to make Hydroponics a little bit easier and have a water source in the same room. The seals on the pipes they were installing broke and leaked through the ceiling causing some damage all the way across my grow room, I was already weeks into my grow and couldn't risk them working above my tent and it would have been very awkward positon for them to be working in as well, so have to get this done quickly between chop and germination. 4. I have to install my new light- I was using a Vivosun 4000 and for this grow I am switching up to a Spider-farmer SF 7000. 1/20/23- For this upcoming grow I am working with M/F photo seeds so I ordered 4 Sex determination kits. I recieved my my 4 Sex determination testing kits from Rimrock Analytics today. I will be using these to test my plants at week 2 of Veg so that when/if I take clones I know I am taking them off females. As well as I don't want to accidently pollinate my tent during this grow I am looking for big beautiful buds not seeded buds. :-) 1/24/2023- Harvest of current grow- Started at 2:00pm and finshed wet trim and firt batch into the freeze dryer. 1/25/2023- Next batch into the freeze dryer and cleaning all my equipment for this Grow. T-1 Day until the workers are supposed to be here to fix the hole in the Grow Room. T-3 days until I instll my new Gorilla Grow Tent and my New Light Spider Farmer SE-7000 for this grow. T-7 Days until Start of Germination 1/26/2023- Harvest is done ran through the Freeze dryer and dry tim completed. 1/27/2023- Grow Room repairs completed. Hole is gone Letting the paint dry before I install the new tent. T-2 days until Install the New Gorilla Grow tent and the new Light T-3 days until I put the hydro equipment in the new tent T-5 days until Germination 1/29/2023- Day 0- Final Pre Germination activities Germination Start T-3 days The paint on the ceiling was dry and it was time to finish prepping for Germination. I got the following items knocked off my list. New 4X4 Gorilla Grow Tent is up and ready New Spider Farmer SE-7000 Light is installed- Thanks Moony Grows for the suggestion and for the Code that got me some money off and free shipping (Moonygrows)!! I turned the lights all the way up to max and set the timer to 18/6 0600-0000. I will keep an eye on the temperature and humidity without my plants and see how hot it gets with the new light. I put my Hydro system back together and put in 40 gallons of water into it, time to monitor for leaks the next few days. I Setup my cloning machine for Germination Days 3-11 1/30/2023 let me break down the situation, ROOM in the TENT.. Enough said.. No really I tried putting my exhaust system up in the new tent with my new light, The light is so big corner to corner that it really didn't give me enough room for the lights be be raised, with the exahust hanging the buckets my plants are Starting in are 2 and 1/2 feet off the ground, great for plenty of room for roots but not so great for upwards space for the plant to grow. In a 6' 11 tent with the exauhst in side and hanging that only gave me a little over 4 feet of grow room to play with. My last grow if you saw my diary, anyone could tell I was struggling to keep the buds off the lights. No good, Since space was such an issue I was running my carbon filter inside on the ground but It really needed to be up sucking the heat out not shooting the cool out. With that setup I was sucking air through the filter and pushing it out the tent at a bottom exhaust hole cold out. Wasn't doing me any good for my heat. I was hitting temps of up to 85 degrees. I bought a portable AC unit and have been running it in the grow room to try and keep temps below 85 and I have had to lower the power on my lights during grow also not ideal.. With that said a friend of mine MoonyGrows (Check out his diary) took the time to look at my issue send me a picture of my grow tent setup with detailed instructions on how to suck the air out from the top but putting my filter and fan on top of my tent so no room issue and I am sucking the air out from the top where the heat is instead of pushing the air out from the bottom where the cool is... THANK YOU MoonyGrows For taking the time to help me get this straightened out.. Now I have room and I have the exhausts working right and now my temps with everything at 100% are topping out at 80 this dropped the temp by 5 + degrees at 100% max. T-2 days until Start of Germination Prepped my seed tray with humidity dome Prepped my Rapid Rooter plugs. I Used RO water, and I added a few drops of Hydrogen peroxide to Oxygenate the water. I then PH balanced between 5.7-6.0 the same that they will be getting in the Cloning Machine and when they get to thier final grow pod. I perfere the 5.8x range and I hit 5.84 for these rapid rooters. If you want to see a complete video on the process HowWeedGrow has an amzing video that shows step by step how to do it and explains it better than I ever could including how to plant the seeds. Which I will cover when I get to that step on Wed. https://www.howweedgrow.com/how-germinate-weed-seeds-cannabis-rapid-rooters/ 1/31/2023 T-1 day until Germination Start All set and ready have my Rapid Rooter plugs ready to go have my seeds out.. Have my seed tray warming up tonight. Tomorrow morning right into the Rapid Rooter then strait into the tray. I will spray the dome to start the humidity in there. 2/1/2023 Germination Day!! Let the games begin! 0600am Put the seeds into the Root Riots. And then put the seeded Root Riots into their first home the Seed tray. I have them under the light 24/7. Sprayed the dome 7:30pm Sprayed the Dome to keep humidity going on the dome. 2/2/2023 Day 1 of Germination Sprayed the Dome in the morning Sprayed the Dome in the evening 2/3/2023 Day 2 of Germination Roots are starting to come out the bottom of the root riot plugs and the heads are slowly popping out of Number 4 just below the surface. Afternoon- Number 4 has popped up Evening- Number 3 has popped up as well. Happy Dance!! 2/4/2023 Day 3 - Germination Surprise Surprise Surprise- all 4 have now poked their heads up.. Happy day!! 100% Germination succeeded. Now major milestone to track is how many are female and how many are male. I will take look at the roots this afternoon/evening and see if they have enough root to go into the cloning machine for the next 7 days before they go into their Hydro Pods. Day 3 - Germination - Evening.. Roots looked good and they were tall enough to make it into the cloning machine. Now that they are all in the cloning machine I have switched the lighting to veg state 18 on 6 off. 2/5/2023 Day 4 - Germination - Morning All the Ladies (fingers crossed) looking great stretching nicely and look nice and green, Photo synthesis underway.... UPDATE!! After a very interesting POD cast on FSTS by Dr. Bruce Bugsbee from Utah University, I have shifted my lighting to 24 hours on through seedling and then I am going to shift to 20 hours on the rest of Veg. 2/6/2023 Day 5 - Germination While Checking on my conditions inside the new tent last night, I found that the Humidity was down to 39 Percent. I added an AquaOasis Cool Mist Humidifier, the reason I selected this humidifier is that I needed one that could be turned on and off utilizing my Inkbird Humidity Controller IHC200 that I have my Pro Breeze Dehumidifier currently running with. Root structures are starting to get there about 1/4 of an inch. 2/7/2023 Day 6 - Germination Everything seems on track more roots poking out of each today. They are each getting a little taller as well. Checked in the evening and number 3 was drooping the Root riot plug on the bottome was dry and the roots were not in the water yet. I raised the water just enough that the longest root that was sticking out is now hitting the water. 2/8/2023 Day 7 - Germination Everything looked good while checking in on them this morning number 3 is now full up and no droop again. 2/9/2023 Day 8 - Germination T-2 days until Plant into Forever Pods and we start week 1 of Veg .. :-) Surprising thing to me is that number 1 and 2 were later in popping then 3 and 4 but the roots are growing longer in 1 and 2. 2/10/2023 Day 9 - Germination Number 1 and Number 2 are definitely ready for transplant today.. Based on how they were yesterday and where they are today I am hoping by tomorrow 3 and 4 are ready. Today they look to me where 1 and 2 did yesterday.. I really hope 3 and 4 catch up by tomorrow since.. T-1 day until transplant to new/ final home for grow. Need the roots long enough to have some clay down in the basket to keep the root riot out of the water and only roots in the water.. 2/11/2023 Day 10 - Germination Today they got placed in thier forever Home, 7 days from Sprout and 7 days until Week 1 Start. PPM- 180 this is water out of the Tap Temp Water: 70.7 Temp Tent: 77 Humidity: 40% I have a humidifier going 24/7 to try and bring this up.. I also have Humidity Domes on each plant. 2/12/2023 Day 11 - Germination Sprayed the domes, all are looking good.. Nothing much to do at this phase but Keep monitoring the PH level in the system and making sure they have a comfortable home. T-6 days until Week 1 start 2/13/2023 Day 12 - Germination Sprayed the domes, They were looking a little yellow today so I moved the light down to assist. Nothing much to do at this phase but Keep monitoring the PH level in the system and making sure they have a comfortable home. T-5 days until Week 1 start 2/14/2023 Day 13 - Germination Sprayed the domes, They were looking a little Florissant yellow today, with what looks like slight burn on the tips, I talked with a fellow grower and we agreed that It was probably that I was drowning them, Yes you can drown you plants even in Hydro, but only early on.. :-) It usually happens with the water being too high, which soaks not only the roots but the medium (root Riot plug in this case). I lowered the water from touching the bottom of the pot to about 1" away. This will probably take 3-4 days to resolve. I will continue my daily monitoring. T-4 days until Week 1 start 2/15/2023 Day 14 - Germination Sprayed the domes, continue my daily monitoring they look a little darker green instead of lime green now that I lowered the water levels in the system, so I think that I might have resolved the issue but it will take a few days for recovery to happen. T-3 days until Week 1 start 2/16/2023 Day 15 - Germination I looked in on them this morning, 3 and 4 look like they are doing well and recovering nicely. Number 1 not so much it has brown spots on the leaves, this very well can still be a side effect of the overwatering but I decide to go ahead and add Nutes earlier than I was planning just incase. I was going to wait until Saturday but I think intervention is necessary now especially after drowning them early on. I added 1/2 what I am planning on adding for week 1 start. I also think I am going to adjust my chart to add 1/2 2 days after plant from now on. I don't think it would hurt it to have some Nutes to pull from. .25ml/Gal Calmag = 12.5ml 1ml/gal GH FloraMicro= 50ml 1ml/gal GH FloraGro = 50ml 1ml/gal GH FloraBloom = 50ml T-2 days until Week 1 start = I will drain the system and start it over on Saturday with Week 1 Nutes. 2/17/2023 Day 16- Germination I didn't even want to post today after looking in on them this morning, 3 of the 4 are now showing signs of dronwing.. Brown spots on the leaves, the water levels were still too high.. I drained about another inch out of the tanks.. Will see how quick they recover.. I start week 1 tomorrow and will have to ensure my water levels are at least 1" away from the basket on this round.
Botanium Cannabis Grow: Green-O-Matic
Hippity
@Hippity
Volgen
They had an hour drive roadtrip today, I hope they didn't get stressed. Moved them to their new home where they are under a 825W Gavita HPS. Today I stopped the Botanium's nutrients and started the Advanced Nutrient's PH Perfect Micro/Grow/Bloom, 1ml of each, inside their 1lt tank. Overall so far they look really healthy, happy, and smell good. This is basically an attempt to grow weed the easiest way possible... I started this grow under my desk with fluorescent tubes ducktaped on it... It's also an experiment to see if it's possible to grow Cannabis with a Botanium. This is an almost completely automatic grow using a simple automatic hydroponic system pot that has an inside timer and waters the plants every 3 hours, and they also claim that it's impossible to overwater the plant with this system. Let's see through this test... The capacity of the pot is kinda small to grow a big juicy tree, so I'm trying to get just a few nugs the simplest way possible... The strain is Green-O-Matic which is one of the smallest cannabis strains ever bred. It consists of some really interesting parents which are White Dwarf, Low Rider, a short Moroccan landrace and a short Ruderalis landrace I hope you enjoy this simple experiment...
Banana Purple Punch Auto-FastBuds-Grow#2
Hi everyone 😁 Welcome to my second diary. Strain of choice 🍌💜👊 Auto from Fast Buds 420. Normally I would use paper towel method but this time decided to try germination in propagator directly to substrate. 100% success. First girl showed in about 48h after planting and second maybe 12h after. 07/10 Seeds planted. Propagator at 22 degrees and 90% humidity. 09/10 Day 1 Girls popped through the soil. 13/10 Day 5 Xena and Athena comfortably transported to new 5 star spa resort and they do like new 14l queen beds 15/10 Day 7 End of germination week. Girls are growing very fast. Have a very good feeling about these 2 Stay tunned for daily updates. Have a great week coming everyone. Peace and love brothers and sisters 🍌💜👊
LSD-25, Not since the 90s
Fatnastyz
@Fatnastyz
Volgen
Final week!!!!! 4-1 No April fools here! Shes big, smelly and READY! Plain water, runoff ppm 361 Here we go!
Frozen Biscotti - Dutch Passion - BTNL
Welcome Back liebe Community 🌱💚 Frozen Biscotti von Dutch Passion on the Run! Die sechste Woche ist vorbei (Wachtumstag 42) und die Pflanze entwickelt sich ok. Das Verhältnis der Seitentriebe zu den oberen Trieben ist etwas im Ungleichgewicht, so das evtl. ein zusätzliches LST angewendet werden sollte um etwas mehr Homogenität in die Struktur zu bringen. Sie ist 65cm hoch und die unteren Seitentriebe bilden sich mehr gestreched aus und erreichen fast die Höhe der Main-Cola. Das allerdings nur vereinzelt. Ich muss schon sagen, ihr Wuchsverhältnis ist bisher eher etwas ungleich. Außerdem habe ich dir Pflanze bereits defoliert um im unteren Bereich der Pflanze eine bessere Auslaüchtung zu bekommen. Die Beleuchtung habe ich nun auf 530 mqm hochgefahren. Die Umgebungsgegebenheiten sind aktuell gut: ————— 🌞 Temp: 26 🌚 Temp: 18°C bis 19°C 💨 RH: 64% VPD: 0,83 kPa 💡ppfd: 530 mpm ————— Viele Grüße 👋
Red pure auto cbd
Hubo avance, ganó peso, y tamaño en las flores, un olor muy parecido a lavanda, tuve problemas con la humedad de mi zona (80% HR) se presentó hongo botrytis, tuve que cosechar la cola principal para que no se propague a las demás ramas, la cola principal pesó 34 gr en verde (recién cosechada).