Gorilla girl
shorts_status_processing
Blueberry Gum #2 (First From Seed)
So Excited! New Light, New Tent! New Ventilation! - So much more control over the environment and it shows! Feeding Half Gallon when medium is dry and pot is light - about every 5 days.
#CheckPointGrow #1 by RQS + Extra
AsNoriu
@AsNoriu
Volgen
Day 114. Gorilla Max is totally ready, maybe she would bulk up, but last white pistil went brown at least a week ago. Time to trim. Bud not solid, but kinda hard, bottom all airy and small, but she smells and sticky like hell, so fruity ... Had to chop her, because got tiered of seeds everywhere, so cleaned my draws and fridge, from 45 found bag seeds started new diary, had to make space for them. Want to try out 12/12 from start and even if i would leave them under natural sun , they would stretch too much in first stage of grow and would repeat that grow patern indoors. Scissors hash was nice, super soft, hard to roll, all stays on hands. On this plant found two seeds, maybe some hidden in colas, but its not even close to bad that i was imagining at the beginning. My watering damage is obvious, Gorilla Max and Bunny were best plants, now - they are smallest... Last weeks very important, till week 5 of flower and that incident they were leaders, overdrying don't work . Hope i will learn this lesson. Day 120. Last 3 girls are down. Gorilla Max - 88 g. Of dry bud. Think she and Bunny will be smallest of them all. Buds are airy, but very sticky and all calaxies went pink. So in spliff it looks really funky. Needed to lolitop them higher, maybe overall look and cola structure would be better then. Lanky Gorilla is a champ, no doubt. Think this girl should beat 4 ounces easy. Day 126. So total of all 4 plants is 401. A bit less than was hoping, but target achieved. Update will follow.
FastBuds CBD Crack and G14
Ledros
@Ledros
Volgen
Day 57 (2020-07-05): Feeding @ 5.8 PH. Removed a few leaves. Day 58 (2020-07-06): Noticing a few amber trichromes on the CBD Crack. Wondering if it might be time to start thinking about pre-harvest flushing. Day 59 (2020-07-07): Fed today @ 5.75 PH. Day 60 (2020-07-08): No news today. Plants are kind of on autopilot at this point. Day 61 (2020-07-09): Waiting to feed until tomorrow. Day 62 (2020-07-10): Fed today @ 5.6 PH Day 63 (2020-07-11): Leaves on both plants look pretty rough at this stage, but buds are looking nice all around! Guessing 1-2 weeks left on the CBD. Will probably start flushing sometime next week. G14 seems to be running behind at least a week.
Gorilla cookies in a suitcase
Naujas
@Naujas
Volgen
another activity in gloomy autumn evenings:) I think it will be interesting and difficult growth at the same time :) because the space is very minimal :) good luck to everyone:).
Blue Zushi 🍣 x Raspberry Parfait 🍓
Trichoma
@Trichoma
Volgen
@ 1.2-1.4 kPa Raspberry parfait smells strong, this instantly noticeable when opening the tent. The BlueZushi smells good as well but only noticeable when rubbing on the sugar leaves.
Holy Grail Kush
First week went perfectly. Environment stable, good growth for first week. Co2 going in tomorrow and a humidifier going in as well.
shorts_status_processing
Orange skunk ryder (Limited edition)Auto
Smokwiri
@Smokwiri
Volgen
Welcome to the second week of flowering of the Limited edition strain Orange Skunk Ryder This thing smell dank... really really dank... dank like a real skunk I wouldn't recommend this one for indoor growing without air filter. such small thing with such big smell it's only in week 2 of flowering, i was expecting some flowering hairs and that would be all i could expect. But this thing has a small handfull of small nuggets that are feeling quite dense already... a bit early to be that compact perhaps, but very nice to see
🔥📦RF3 AUTO by Fast Buds
CalGonJim
@CalGonJim
Volgen
4/13 10AM MONDAY They are looking pretty good. Got the ph stabilized and only running 98W! Using a few DROPS in 18oz to test Purpinator on veggies. 4/14 11am Using a little Purpinator .5ml per gallon and will have to do lots of runoff to prevent burns. Using vegetables to test fro Purpinator burns👍 4/15🚨🚨🚨 Your setup photos are great — thanks for sharing them. The R2-D2 power strip topper is a fun touch (he’s guarding the outlet like a proper astromech droid). Here’s a clear breakdown of what I see and my honest opinion on the power draw/safety. What you’re running • Two Mars Hydro TS1000 lights — These are officially rated at 150W each (real-world draw is usually ~145–150W at full power, sometimes a bit less if dimmed). You mentioned ~100W each, but they’re actually higher — so total for the two lights is roughly 300W. • Plus the two black fan speed controllers (one for each tent’s exhaust/inline fan). • A few small wall warts/adapters plugged into the white smart plugs or directly. • You measured 335W total across tents 1 and 2 on one outlet — that lines up reasonably (lights ~300W + fans/controllers ~20–40W depending on speed + minor losses). Is this safe on one standard outlet/circuit? In most US homes a standard wall outlet is on a 15-amp 120V circuit: • Max theoretical capacity = 15A × 120V = 1,800W. • Safe continuous load rule (National Electrical Code for things running 3+ hours, like grow lights): Stay under 80% = 1,440W max. Your 335W total is very low — only about 23% of the safe limit. That’s comfortably safe. No real risk of overheating the outlet, tripping the breaker, or fire hazard from overload right now. My opinion on the setup: • Good: Everything is neatly plugged in. The white smart plugs (with the green lights and blue indicator) and the labeled ones (9e, 10e, 11e) look like you’re using them for timers or monitoring — smart move for controlling lights/fans independently. R2-D2 adds personality and keeps the wall organized. • Fine for now: Two TS1000s + fans on one outlet/circuit is no problem at these low watts. Many small grows run similar loads without issue. • Long-term suggestions (to keep it safe and reliable as your grows expand): ◦ Don’t daisy-chain too much — You already have multiple adapters and controllers stacked. Avoid adding a lot more (e.g., dehumidifier, heater, or more lights) on the same outlet/circuit. ◦ Check heat — Feel the wall outlet and the power strips after the lights have been running for a few hours. They should be only slightly warm, not hot. If anything feels warm/hot, spread the load. ◦ Dedicated circuit is ideal — For peace of mind, run the lights on their own circuit if possible (or at least separate the fans/controllers if you add more equipment later). ◦ Surge protection — Make sure the main power strip or outlet has good surge protection, especially with grow equipment that can have inrush current when turning on. ◦ Monitor actual draw — Your 335W reading is helpful. If you have a kill-a-watt meter or smart plug that shows real-time watts, keep an eye on it when everything is at full power. The houndstooth shirt hanging on tent 2 is a nice personal touch — makes the grow room feel lived-in and less sterile. Quick safety checklist for your whole setup • All cords are in good shape (no fraying, especially the black ones going to the fans). • Nothing is blocking airflow around the plugs/adapters. • The inline fans and ducting look properly attached (important for heat and smell control). • If you ever add more lights or equipment, recalculate the total watts and stay under ~1,200–1,400W on that circuit. Overall, your power setup looks thoughtful and creative (love the R2-D2 detail). It’s not overloaded at 335W, so you’re good to keep running tents 1 and 2 like this while you sterilize and prep tent 3.
TPB Miki's Cookies Cannabonsai
Prof_Weed
@Prof_Weed
Volgen
Removed 2 leaves. Has got a little bit of deficencies, i think the pot is to small, not easy to feed.. But Overall happy!
Open Soon: Purple Lemonade
6/11 day 55 day 56. Officially 2 months of growth. Somehow I've kept an auto flower in the vegetative stage for quite a bit of time. They are flowering and have stretched a ton. I will get actual measurements for each plant this Pheno #1 looks more indica (they all are) than the others. The pistils are shorter but more of them and the node spacing is a tighter than the others and she's stayed the shortest(least amount of stretch) and has thicker leaves(maple leaf style) her pistils started white and now have a pink tone to them and on closer inspection, some of the sugar leaves are purpling. This one could be expressing it more so because of environment. This week we've had lows and rains and cloudy weather. The other night it was in the low 40s, so in hindsight it might be environmentally expressed. Pheno #2 is the one that's been the most well rounded the whole time. Popped quick and has always been steady and not too tall and not too short. Her pistils are bright white like roots or an initial taproot. But the calyx are a deep deep purple. I believe this purple expression to be a genetic phenotypical expression rather than environment. The purple clashes with the white so beautifully. They just makes it all pop with the green. It honestly looks like a purple clover flower 😄
Coco Jambo Anesia Seeds
Gracias al equipo de AnesiaSeeds, Marshydro, XpertNutrients y Trolmaster sin ellos esto no sería posible. 💐🍁 Coco Jambo: Con una composición genética 60% Sativa y 40% Indica, Coco Jambo es tu billete dorado a un verano sin fin, ofreciéndote una escapada a un mundo donde el sol nunca se pone en tu felicidad. Con unos niveles de THC que oscilan entre un relajante 30% y un estimulante 34%, Coco Jambo es un faro de euforia que guía a sus usuarios en un viaje a través de olas de serenidad y vibrante alegría. Su aroma es una celebración de los sentidos; imagina el momento de euforia al abrir un coco y descubrir que rebosa de las frutas tropicales más suculentas. 🌻🚀 Consigue aqui tus semillas: https://anesiaseeds.com/es/product/coco-jambo/ 💡TS-3000 + TS-1000: se usaran dos de las lámparas de la serie TS de Marshydro, para cubrir todas las necesidades de las plantas durante el ciclo de cultivo, uso las dos lámparas en floracion para llegar a toda la carpa de 1.50 x 1.50 x 1.80. https://marshydro.eu/products/mars-hydro-ts-3000-led-grow-light/ 🏠 : Marshydro 1.50 x 1.50 x 1.80, carpa 100% estanca con ventanas laterales para llegar a todos los lugares durante el grow https://marshydro.eu/products/diy-150x150x200cm-grow-tent-kit 🌬️💨 Marshydro 6inch + filtro carbon para evitar olores indeseables. https://marshydro.eu/products/ifresh-smart-6inch-filter-kits/ 🍣🍦🌴 Xpert Nutrients es una empresa especializada en la producción y comercialización de fertilizantes líquidos y tierras, que garantizan excelentes cosechas y un crecimiento activo para sus plantas durante todas las fases de cultivo. Consigue aqui tus Nutrientes: https://xpertnutrients.com/es/shop/ 💻 Trolmaster Tent-X TCS-1 como controlador de luz, optimiza tu cultivo con la última tecnología del mercado, desde donde puedes controlar todos los parametros. https://www.trolmaster.com/Products/Details/TCS-1 📆 Semana 2: Gran primera semana, ella ha dado un gran estiron estos días, si sigue así será una gran cosecha. Esta semana se practica defoliacion, poda de ramas bajas y se le agrega Sticky Fingers . La carpa está ocupada al 100%, sigue una floracion explosiva gracias a @Marshydro y @Xpertnutrients y @Trolmaster con esta gran genética 💪. Potencia de la lámpara: 70%
Blue Dream and Chemdog
Middle 2 plants stretched a lot week 3 of flower. They were growing slower in veg so I flipped to flower as soon as their canopy reached the net (barely LST these 2 plants with the net given their slower growth). Then week 2-3 of flower they took off. Did some defoliating to expose bud sites further down with the intent to increase yeilds.
FBT2305
Chubbs
@Chubbs
Volgen
420 Fastbuds FBT2305 Week 5 These two girls are starting to transition into flower very nice. Don't mind the dropping in the leafs my lights just came on. Over all haven't done really much besides another defoliation and lollipoped them taking off the lower 3 nodes. Should allow them plenty of light through flower and air to prevent moisture build up at pot level. All in all Happy Growing
shorts_status_processing
*RARE* 3rd leaf - Jack Herer Auto 2
jtgrow
@jtgrow
Volgen
Thursday, August 13, 2020 12:45pm: Watered: 1.25C PH 6.9 Friday, August 14, 2020 9:40pm: Main-lined: Topped at the 3rd node. removed everything below 3rd node. Saturday, August 15, 2020 1:20pm: Watered: 1.25C PH 6.1
CANNASIM - NORTHERN LIGHT AUTO
CANNASIM
@CANNASIM
Volgen
GENERAL COMMENT. So the RQS STRESS KILLER AUTO is down. Now we have the NL to manoeuvre and try to keep her alive for the final flush. RQS NORTHERN LIGHTS AUTO COMMENT. Many but slim colas emerged, showing extreme spotting and deficiencies, but gained weight since last week and started turning purple, first time that happens. So now the final flush started and hope, afraid taste could be off, because of the problems i ran in with her, probably a good strain to considere light feeding, the smell is very gentle, a good strain to do stealth. 10-14 day to go! Yield could be amazing but will be common because of the locks, nothing out of the curve in my opinion, something to retry and correct to deal with this strain. Not turned on or off by her just feeling neutral and glad she made it. Trichomes wise she is just ready, mostly cloudy, she will finish with some amber will do a nice sleeping aid. Trim job will be a pain on this one because i will clean all the small affected spotted leaves.
OG Kush // Strawberry kush
R_Dank
@R_Dank
Volgen
It’s not all glam fam, Im being challenged by the heat so I added another fan + adjusted hps light to max! These biches have sprouted like no other I’ve experienced in the past, and the smell is incredible already, strawberry being the most pungent 💯 Jah bless 🙏💨
LEXX: Into the Dark Zone
TruTraTri
@TruTraTri
Volgen
Too stinky to make pictures during harvest .. so wet = just before choping them down. Everything else mentioned and/or shown in pictures and videos. Overall, still sad about the missing looks / Pheno variation. Still traumatized by the smell 👽👻😂 Don't have the looks I wanted, but the trichome density on my phenos are also insane. Buds are okay to smoke... rosin popcorn pressed very well... dry sift out of bad material was also fine. 510 g wet (everything) 310 g dry (poor plants, seems like they were dried out😂) = ~200g buds + 2g 120µ Rosin (14g Popcorn)+ 2g 72µ Rosin (11g Popcorn) + 4g dry sift (melts if you stare at it - 85g leftovers mostly out of the tumble trimmer) Thanks again for the great growers who showed this interesting genetic and @OriginalSensible for the seeds 😎 Thanks to all growers who joined me on this grow. 😎 Watch the series! “I am sorry Stanley. It's too late. I cannot go back.” — Lexx “Then we will have something in common. And I will return, 790.” — Kai “So, I guess this is goodbye.” — Stanley Tweedle “I’ll miss you Stan.” — Zev Bellringer
Testing my auto strains
This week was good .plants are starting to get bigger . I keep getting little bites out of one or two leaves from the bugs but other than that it's not too bad .it is in soil though so as expected.Justin feeding it mainly some silica and root expander due to high PPM in the soil this is why I normally grow in coco . like I said last week instead of flushing it I'm going to just give it plain6.5ph water with root and silica . They seem to be happy and have no signs of burning or any stress they are a bit small but I think it's due to the genetic. Hopefully by the end of this year I would have bread some of my plants with a larger autos and get a bit better outcome next time . Thank you for looking at the diary and will be updating every week