Likes
Comments
Share
@MaxWax
Follow
Unfortunately, the plant didn't handle my absence very well. It got way too hot inside the greenhouse, and my neighbor was a bit too generous with the nutrients while not allowing enough runoff (drain). I flushed the plant today—the initial runoff was at a critical 2200 PPM, but I managed to flush it down to a stable 800 PPM. I really hope she recovers quickly now. I have to leave for another two-week work trip this coming Monday, so I'm hoping she bounces back by then so I can leave with peace of mind🙈😀
Likes
Comments
Share
7 weeks into flowering and she’s bulking stable and well. She’s expressing her terpenes and the smell is super skunky with a touch of citrus. Recently, my humidifier ran out of water while I was out, and she had to endure about 2 hours of super low humidity (~40%) and high temp (~30C+), but recovered fast and continued bulking like nothing happened — she’s reallyyy stress-resilient, very good genetics from Zamnesia 🙏
Likes
6
Share
@Reidy_B
Follow
Things are looking great! I started some backup seeds when things were looking really rough. Just in case. 😉 I also FIM’d my bigger plants because they were looking so much better! I have also removed the drip irrigation, just to make it more of a personable experience with my ladies. ☀️💦
Likes
10
Share
@Tegridy
Follow
Defoliation took all fan leafs off left 3 on top of each main branch Added sonic bloom
Likes
15
Share
Ultima serata passata all'aperto ad una temperatura di 2/3gradi c°...un buon sbalzo termico.stamattina quando sono andato a tagliare la mia bella bimba mi è sembrata più brillante di quando l'ho tirata fuori dal box...bene bene😂🤣😉😋🤤
Likes
9
Share
We start week 3 of bloom!! Goofiez 2 amor compound genetics it’s the champions!!
Likes
14
Share
She grows a bit every week. Can't wait for take off. I had a hard time dialing in the environment, but now she is doin much better.
Likes
25
Share
10-05-2021: I am counting today as day One for Veg. Planning to hold them on 18/6 till the 20th of may (ten days) and then switch. Not sure if I will stress them a bit or not, time will tell. Yesterday was hot (26˚C) here so all values have shifted a bit. Won't be a problem as soon as they are on 12/12. Do you notice the lines (air/water) changing position on heat :) Didn't even notice that at first. Also pretty sure I need a more powerful chiller at the moment but will first make an attempt to replace the gas. 13-05-2021: Today I will be replacing my chiller. It doesn't keep up and the temperature of 28˚C is a bit too much. For the rest.. All great 15-05-2021: Added some paper sheets to reduce heat. Seem to work so today I'll go to hardware store and buy something to make a more permanent solution.... I have added some reflective foil to cover the boxes
Likes
80
Share
Day 14 F. HOLY SMOKE THIS LIGHT KICKS ASS!!!. Lol Each week that passes has been a pleasant surprise. I expected I would have had to move a good portion of the plants over to my other space and just grow 1 or 2 under this Viparspectra xs1500. Yet her we are at week 2 ending with flowering plants who are all getti g plenty of light to convert into the growing buds. The #1northern lights is well underway with stretch and bud stacking while her midget sister tries to grow higher. The 2 Gorilla cookies are beginning their stretch now and showing fluffy tips that are the pistils bursting out. Both look like they could get very big indeed. I may have to move these two so I can get my Grandaddys mimosa and the big northern light right below this little powerhouse of sunshine. My Mimosa is really impressing me at how vigerous it is. She is stacking the buds up on her many limbs too. I did a minor defol to remove lower scrubby growth and will be keeping her focused on her mains. She looks very happy at the moment. The light really has impressed me this far and seeing buds appearing all over the plants isba promising sight. Lets see what they do in the next week. Be safe.
Likes
5
Share
End for this SLH ! Dutch classic I must ran ! Never forget the first time I smoke it in Amsterdam XXX !
Processing
Likes
56
Share
Bonjour à tous les padawans et maîtres jedis stretch 15 centimètres (Stretch explanations more) EXPOSURE TO LIGHT One of the main culprits in abnormal stretching of cannabis plants is the lack of light. Plants that are too far from an adequate light source will respond by accelerating stem growth in order to get closer to the lamp themselves. Especially when there are many other plants. A lack of lighting can easily cause overcrowding in a growing chamber, reducing the steady progression of your crop and the distance ratio between your bulbs and your plants. To address this problem, be sure to provide enough light to your plants to prevent stem growth. At the same time, you should not position your lights too close to your plants either since this would also result in an over-stretching of the stems and in some cases, the loss of your crop. In addition to the distance between the light source and the plant, the type of light you will use also affects the size of the stretching of your crop. The orange and red lights encourage stretching and result in thinner, larger stems. And conversely, blue light stimulates a growth of thicker stems and a smaller size. When a species is ready to enter the vegetative phase and undergo its most drastic stretching period, metal halide lamps can be used to deter far too long stems. THE HEAT Heat is another essential element that can determine the stretch size of your plants during vegetation. Temperatures above 27 degrees push the stems to lengthen more and more and will propel the potential of sativas to push as high as possible. Heat lamps that are positioned too close to plants create an intolerable environment that will grow large, soft plants that will potentially wobble until they fall and lose flowers in its fall. OTHER CAUSES OF STRETCHING There are multiple variables that can lead to the stretching of plants beyond what could normally be expected of the plant. Environmental stressors resulting from transplantation (when a plant passes from one pot to another) can cause the plant to return to shock. This will eventually trigger a reaction causing a stretch. Cannabis plants that are not grown in decent conditions or do not receive enough nutrients will respond in a variety of ways and this includes stretching. Crops that are not spaced far enough apart are likely to stretch to sting the light to other plants. Due to extreme proximity, the plants will fight among themselves to reach the light, forcing them to expand as much as possible throughout the crop. HOW TO CONTROL STRETCHING DURING FLOWERING Stretching during flowering, you guessed it, takes place when you move your plants from the vegetation stage to the flowering stage. This is a completely normal reaction, as your plants are preparing to bear the weight of their heads. Stretching of a plant at the beginning of flowering varies widely; some plants can double in height while others grow only a few centimetres. There are, however, two main variables that can give you at least an idea of how your plants are stretching during flowering, and how much. Here are these two variables: Variety: Genetics has the greatest impact on the size of your plant. In general, sativa varieties stretch more than indicas and tend to develop long, slender stems. Light: Some lights, such as HPS, are more likely to encourage stretching. In addition, great distances between your canopy and your lights will cause the plants to stretch as they try to get closer to the light source. Stretching during flowering usually lasts the first two weeks of the phase. To minimize stretching, keep your lights between 10 (for CFL) and 30 centimetres (for HID) of your canopy. Finally, choose indica varieties if you have a smaller growing space. HOW TO AVOID STRETCHING In many cases, you can expect your cannabis plants to stretch during the flowering phase. Keeping that in mind helps to make a plan in case your species ends up growing much more than you could have imagined. If the information is available, get information on the standard size of your species and compare it to the size of your growing space taking into account the necessary distances between the bulbs and the plants. TRAFFIC While outdoor crop operations benefit from natural air to naturally limit stretching, indoor crops must assume the maintenance of air circulation within a confined space. Basic ventilation is enough to help the cannabis stems strengthen and become thicker rather than too high. In this way, the plants continue to grow vigorously without reaching heights and at the same time, your tolerance ceiling. MANUAL INTERVENTION For growers who want to get their hands dirty, there are physical procedures that can be done to reduce stretching. Similar to the natural effect that the wind has on cannabis plants, manually bending the leaves and stems will cause tiny cracks in the plant's tissues that will cause the plant to focus on regenerating its wounds instead of its vertical growth. THE TOPPING Topping is a form of manual intervention on cannabis to influence its performance, shape or size. In essence, topping is a process in which a new node is cut, growing from the plant to reduce its size and create a "v"-shaped notch that will eventually form two heads. Topping may be an effective measure to combat stretching, but it is important not to do so when the flowering phase begins. In most cases, an abnormal stretch of cannabis plants will not completely destroy your crop. In fact, stretching can indeed help increase your performance. For growers with a growing operation large enough to contain tall plants, stretching can increase the total yield of a species with more vertical space for head formation. In both cases, stretching can easily be planned in advance and there are multiple solutions to help you with this problem which is all too common. Jour49 arrosage Jour51 arrosage 2 litres d'eau Jour 54 légère defolliation arrosage avec deux litres d'eau ph6.3 à laquelle j'ajoute 0.6 gramme de feeding enhancer greenhouse Good luck for your grow 🤞🌱 May the force be with you 💪
Likes
Comments
Share
@hfwbr420
Follow
Everything is running beautifully. The plants are showing their first buds. Had to remove a lot of leafs because there was a humidity problem I couldnt get rid of. Any tips for improvement are allways welcome! :)
Likes
41
Share
@Growing88
Follow
For now I'm happy with the germination,Even the transplant in the organic coco hydro growth modules all right yesterday✌️🏿
Likes
4
Share
@SpliffDoc
Follow
Will update midweek, got some more 420 Fastbuds beans on the way so im stepping up my journal game. Have a great week, smash it.
Likes
16
Share
@DrLaggis
Follow
🌱 Day 50 - First Day of Week 8 🌱 Hello, Grow Friends! My plant is doing well, and it’s amazing to see visible progress every few hours. 🌱✨ The buds are in full throttle, and I feel like the plant is now needing more water as the pots are drying out faster. 💧 Watering: I’m still watering with 1L every two days. 💦 The dosage of BioBizz Grow and BioBizz Bloom has been increased according to the BioBizz feeding schedule. The pH of the water remains constant at 6.0. ⚖️💧 Temperature & Humidity: Luckily, the weather in Germany is cooling down, so I no longer have to deal with temperatures of up to 30°C in the tent. 🌡️🍂 I’m expecting temperatures to settle between 18-23°C now that we’re in September, and humidity should stabilize around 50-55%. This will create perfect conditions for the upcoming drying process. 🍃✨ Plant Health: The plant is looking good overall. 🌿 I did have some calcium and magnesium deficiency symptoms recently, but I’ve managed to get that under control with CalMag. 💪 I’m continuing to carefully remove any leaves that are noticeably blocking light to the buds and hindering photosynthesis. 🍃✂️ Vibes: Every day, my plant still enjoys an hour of Lo-fi Jazz music. 🎶🌱 I think it helps set the perfect growing atmosphere. 🎷 🌱 Day 56 - Last Day of Week 8 🌱 Final Feeding: Today marks the last day of the fourth flowering week and the last day I’ll be feeding the plant. 🌿💧 From now on, the plant will receive only water for the final 14 days to flush out the remaining nutrients from the soil. 🚿 As a beginner, I’m unsure if two weeks without nutrients will be enough for the plant to finish properly. There’s a part of me that worries about potentially wasting its full potential by skipping nutrient periods. 🤔🌱 However, I’ve decided to stick with the plan—after 14 days of just water, I’ll harvest the plant. ✂️🍃 Humidity & Temperature: This week, the weather has cooled down significantly, and I no longer have to struggle with high temperatures. 🌡️🍂 The temperature ranges from 19-23°C during the day, and humidity sits between 49-56%. I think these are ideal conditions to bring out the purple hues in the buds. 🍇✨ Defoliation & Plant Care: I’ve finished the final defoliation and trimming of the plant this week. 🍃✂️ From now until harvest, I’ll avoid making any more changes or interventions, as I want to keep the plant stress-free and allow the bud production to progress smoothly. 🌱💪 Trichome Observation: As a beginner, I’ve started checking the trichomes this week, but I’m finding it challenging to distinguish between clear and milky trichomes. 🔍💎 I plan to harvest when I see 90% milky and 10% amber trichomes. 🌿✨ I’ll keep you all updated next week, and don’t forget—there are new pictures every day! 📸🌱
Likes
24
Share
@rucucu94
Follow
Esta enorme, nada mas que agregar. Me olvide de scarle fotos para el diario, pero le saque eso, ya que yo no estoy todos los dias. Se va para arriba ella, esta hermosa
Likes
25
Share
@Lukush
Follow
Hey growmies all is good and mi baby girls are loving life!! Gonna start giving them some nuts in a couple days 👍 Thanks for passing along have a good one growmies. Check out the sp 6500 on website 👍💪👍https://marshydro.eu/products/mars-hydro-sp-6500-led-grow-light/ SP6500, as one of the huge single bar LED grow lights, installed with top quality Samsung LM301B diodes, designed with enhanced red in broad-spectrum light, emits the highest central PPF and has the superb penetration that its major applications are for high-wire plants and greenhouses. Wattage – 650w Veg Coverage – 4×5 ft Flower Coverage – 3×5 ft Featuring a thick aluminium passive heat sink and densely arranged chips, the SP Series provides high efficacy but low heat output while minimizing obstruction to natural LIGHT!
Likes
17
Share
Amazing results! They’re 2 weeks (14days) in bloom today! Flowers are developing everywhere with this one! I had to make an edit on one of the stems as I had no more room on the pulley and had to snap a stem and bend it sideways! (Super crop) can’t wait to see what happens with it as the last time way Ago in the past I accidentally snapped it after bending it as it heals firm and I didn’t realise but this time no mistakes even got her tied as I had to bend her twice as the first time she sprang back to position! Hope you like 👍
Likes
7
Share
Hey folks 2 Nov New week. Last week flew right?. Anyhow weve hada mix of weather this past week. Some really hot 31C temps to milder very rain and cloudy days. The plants are loving it however. Iv decided for the time being to stop using chemical nutes and keep the grow organic, which is why I switched to a handful of bonemeal on the surface of each plant. Will see how they respond. Plant 1 doing really great! Really impressed by this plant. Its also very pretty with pink purple buds and has not once showed any signs of sickness. It just keeps low and bushy and keeps shooting up those buds. They top buds are gradually fattening up nicely as the leaves of the plant become dark green. Plant 2 confuses me a bit. Its in flower alright but the rate of bud produ tion is super slow, and pistil count at 1 time is also low??? Reveging maybe?? Looks very healyhy however Plant 3 almost ready for harvest. Been flushing for a week now, waiting of the final pistils stzge and ambering of trichs before chopping Iv also included some pictures of my growth patch with smaller plants surrounding. An Outdoor SOG??? Till next time growmies Sho/ciao