End of Week 11 (Fourth week of flower) The ladies are frosting up more and more by the day and there are trichomes everywhere! I Added about 8g per plant of GHF BioBloom and a cup of worm castings a small final feed to make sure the ladies have what they need to grow big dense buds. And increased the CO2 to 1400ppm and in 2 weeks time I will cut the CO2. The main top-sites are bulking up more and I am very happy with the inter-nodal spacing as well as the bud formation. Trying to keep the training to a bare minimum and ONLY removing fan leaves that are blocking bud sites. I have been keeping a cooler average temperature - and also keeping the relative humidity lower. Pest Report: None

Super

Fractal was harvested on Sept 12. Due to extended period of high temperatures and humidity with more rain expected every day following another hurricane. The other gals were showing disease. That was the determining factor to chop all outside girls down. Fractal hung in the dark for 2 days. Because her grow family experienced bud rot and wilt, she was examined carefully for any disease. She was disease free. Fractal had a long vegetative phase. Probably too long since I started my outside grow in April so they would be hardened off before I went on vacay in May. Three months of veg caused massive vegetative growth. The various breeder notes on photo period seeds indicate late September or October harvest. So that was in the back of my mind during this grow. 👉 Note for next year start seeds later in spring. 👉 Plan start date based on counting back from the vernal equinox. 👉 Based on such a long growing season, Autos may be preferable to finish quickly and not have extended vegetation phase before flower. Thank you @DivineSeeds for the opportunity to grow your exotic strains and participate in your contest. I will definitely grow fractal again.

Hallo zusammen 🤙. Sie wächst sehr schön und macht keine Probleme.

Today is day 72 from seed!! This week went real well , 2 of the Forbiddin Runtz have been getting flushed an the rest will also start flush through this next week, I can’t believe the smell of this combo strain,, super fruity smelling an all are super sticky!! Stay tuned for next week yall !

Gracias al equipo de Divine Seeds, Marshydro y XpertNutrients sin ellos esto no seria posible. 💐🍁Fractal: La semilla de marihuana Fractal es una cepa especialmente psicodélica que Semillas Divinas desarrolló para experiencias esotéricas y místicas, meditación y creatividad. La potente y vívida Skunk#1 fue cruzada con una pegajosa Afghani Indica, y el resultado es ahora conocido como Fractal. Este exótico híbrido es resinoso, picante y productivo. La mejor opción para el cultivo comercial: un compromiso entre mayores rendimientos y maduración rápida. En interiores se espera una altura de 1,70 m, en exteriores las plantas crecen hasta 2 m. Fractal se adapta a todo tipo de entorno de cultivo: cajas de cultivo, instalaciones hidropónicas o aeropónicas, plantaciones exteriores, balcones, terrazas e invernaderos. Para un mejor rendimiento se recomienda entrenar a las plantas de Fractal para ampliar su estructura y limitar su crecimiento vertical. Usar ScroG o SoG, LST, FIM o topping. Fractal tiene una inmunidad inherente al moho y a las plagas de insectos, pero como sus colas son gruesas, proteja sus plantas del aire viciado. También durante las semanas de lluvia su plantación puede necesitar ser cubierta. Listo para la cosecha al aire libre en octubre. Grandes y densos cogollos. Los cogollos de marihuana de la variedad Fractral huelen a hachís y algo a tierra, desprenden cedro y notas afrutadas al romperse. Mida su porción con cuidado: su potencia está por encima de la media. Con Fractal experimentas un apedreamiento general que te hace sentarte o frena tu movimiento. Perfecto para pasar una noche junto a una hoguera. Es mejor consumirlo por la noche. 🚀🌻 Consigue aquí tus semillas: https://divineseeds.net/es/fractal-fem/ 💡FC6500: Eficiencia líder en el mercado: la lámpara de cultivo LED FC-E6500, que ostenta un estatus líder en el mercado, es una solución rentable con un PPE de 2,8 µmol/J y un rendimiento máximo de 2,5 g/vatio. Ofrece un PPF alto de 2026 umol/S y es adecuada para una cobertura de vegetación de 1,50 m x 1,50 m y una cobertura de flores de 1,20 m x 1,20 m. Iluminación versátil y uniforme. https://marshydro.eu/products/mars-hydro-fc-e-6500-730w-commercial-led-grow-light/?gad_source=1&gclid=Cj0KCQjw1qO0BhDwARIsANfnkv9IIrYSbmJqz8PqpJOIyWwJfp5bc3SGJgUV68USLQ4tjmXDYwoBuAsaAue3EALw_wcB 🚥 MarsHydro ADLITE UV/IR/RED: Para lograr un crecimiento óptimo de las plantas y maximizar los rendimientos es un arte simple que depende en gran medida de las condiciones ambientales adecuadas. Reconociendo las limitaciones de la iluminación natural y las soluciones de iluminación tradicionales para satisfacer estas necesidades únicas, lanzamos ADLITE. Estas luces especiales UV, IR y roja están diseñadas para llenar áreas del espectro, proporcionando las altas longitudes de onda que las plantas necesitan para un crecimiento y desarrollo óptimos. Consigue aqui tu Adlite: https://marshydro.eu/collections/adlite-supplemental-lights/ 🏠 : Marshydro 1.50 x 1.50 x 1.80, carpa 100% estanca con ventanas laterales para llegar a todos los lugares durante el grow https://marshydro.eu/products/diy-150x150x200cm-grow-tent-kit 🌬️💨 Marshydro 6inch + filtro carbon para evitar olores indeseables. https://marshydro.eu/products/ifresh-smart-6inch-filter-kits/ 🍣🍦🌴 Xpert Nutrients es una empresa especializada en la producción y comercialización de fertilizantes líquidos y tierras, que garantizan excelentes cosechas y un crecimiento activo para sus plantas durante todas las fases de cultivo. Consigue aqui tus Nutrientes: https://xpertnutrients.com/es/shop 📆 Semana 9: Hemos llegado al final, lo hemos conseguido, los cogollos estan bien gordos, listos para el lavabo de raíces y darle unos dias de madurez antes del corte final. Ha quedado una planta con muchas ramas compactas, distancia internodal corta y toda la rama esta llena de cogollo y resina. Tremendo el trabajo por parte de mis patrocinadores, como siempre XpertNutrients, Anesia Seeds y Marshydro no fallan. Con la nueva iluminación + los adlite se ha incrementado el tamaño de las flores, la cantidad de resina y el olor es mucho mas fuerte que otros grows.

4 settimana e tutto procede come programmato. Questa settimana si allungheranno per l'entrata in fioritura......inizierò dalla prossima settimana la conta dei giorni di fioritura..... Grazie a tutti gente 🙏🕉️

Hello my friends growers This week I've got more and more yellow leaves, Do you think it's a carence, water excess, precose senesence? I don't what I need to think, or if just normal, I just give her water two times per week. 0.6l x 2. Fertilizer 1/2 times. I think I'll harvest end of this month or start December. If no, bud are biggest each day, and smeel really sweet. I've also started pk 13 14 this week. Sorry not lot pic's this week , I've broke my phone and lost several pic's. Have a good week 😁😁

Hello. This is the end of week 1 and the beginning of week 2 of flowering. The plant is doing good and growing well. It's stretched a bit last week being week 1 of flowering. And she will stretch more this week too. The next trim-up will be, before the end of week 2, before the resin starts flowing, around week 3. Be Great. Chuck.

End of week two notes : Created a gilly web to get everything nicely pulled in a way that is barely stressing the plants . Because all of thebsteings have specail knots as they grow in certain places , it will take stress off other parts of the plant in the webbing . Also increased out solution temperature From 21.6 to 23.8 also we were adding 150 mills of budjuice once a week and then the CO2 to breathe bag would be why we are increasing the temperature in order to get that CO2 to fully Digest it as much as possible without causing any burn or over temperature stress to the plants. They are on the floor , and it being -40C and colder I think that is to contribute to the plants not drinking as much . As you can see there is no sign of nutrient burn or really and disfunction I can see ? Let me know because as always I am always looking to bounce ideas !!

Well, it's been another busy week in the garden, and things are getting interesting. The coolest thing about a mixed run is seeing all the differences between the strains, all growing at different speeds, having different structures, different shapes..... It's gonna look awesome when the tents are in full flower. And with them all at slightly different stages, it's kept me with things to do every day. Some highlights from the week: MBAP #1 - Fimmed, LST'd and defoliated on day 16 MBAP #2 - Fimmed, LST'd and defoliated on day 17 Walter White - I normally fim my autos, but given that this plant had the 3-way node mutation, I decided to top and see if we can get some nice 3-way main cola action going. Topped on day 18. SOH #1 & #2 - Haven't even started training these yet due to size, and they are already throwing pistils!! Both first started to show signs of sex around day 16. #1 had clearly defined pistils by day 18, and #2 had them the next day. I think these may be some fast finishers, never seen them go into pre-flower this early. Will raise a grow question to see if anyone else has any experience of this. BGS - Fimmed, LST'd and defoliated on day 20 All the plants have started some form of training except the PP and 2 x SOH. The SOH have already begun sign of going into pre-flower. Given their small stature I'm inclined to simply stick to LST and avoid high stress techniques, so I don't think I'll be fimming or topping these ones. All plants are still on the same feeding schedule for now, but I think I'm going to have to start independent schedules this week, as they are clearly developing at different rates and will have different nutrient requirements. But for now, the current feeding looks like this: Nutrients ~~~~~~ CalMag: 0.95ml / gallon (0.25ml / liter) MegaCrop: 3g / gallon (0.79g / liter) Total EC: 1050 PH: 5.7 Tasks for the week ahead - get the MBAP and SOH onto autopots. This will cut my manual watering by more than half, saving time, sanity and my marriage :) Happy days. Catch you all in a week....

I gotta say these last few weeks have been pretty smooth. They just really started swelling up this week I think. I started the flush but noticed the leaves haven’t really been praying lately and some have been clawing. I’ve only been giving ph water since last week. They also don’t seem to be fading either 🤷‍♂️. Anyway I’m going to take them into week 9 and chop em start of week 10. By then maybe I’ll see some fading

Another week has passed and this lady seems to have recovered from last week's sudden problems. I just kept feeding with clear water, I suspect low PH and my solution fixed it. I also raised the light a little more, this SP 3000 is a true beast of a light, and especially the Kush in the middle couldn't handle it that well. Thank you @MarsHydroLED I did some final defoliating, only bundled up leaves and leaves covering major bud sites. This Orange Hill Special is something else though, Im happy to grow this, she is pretty and sophisticated in all, almost majestic. The buds are speckled with orange hairs, the shape of each like a round ball of ice cream. She was pretty from seedling on and looking back, I would have loved some offspring of this pheno. She is a thrill and no signs of male parts on this one, although it can happen with this strain. So glad I have some more seeds and cant wait to put a tentful of this. Don't let its low score dissuade you, yes there is a chance she hermies but when she doesn't my my my... Check em out here @DutchPassion_Official She smells of orange and tangerine with a very strong hazy undertone. This combination promises a great smoke and frankly, I cant wait. Thanks for reading up on me and thank you for the comments and likes again! Hug Bud

Weekly update on these absolutely gorgeous girls. I was gone for the beginning of the week and came back today and I swear the flowers have doubled in size. They're smelling super strong and gassy. The flowers are dense as rocks so I hope with the summer heats they'll stay that way and not become airy. All in all Happy Growing.

It’s warming up outside so the a/c and dehumidifier are working a bit. Got the lights on during the night so just a few hours at lights on they work a bit hard. Cleaned up underneath removing any sucker shoots and leaf that was near the soil. Not much really. Mostly on #3 as I didn’t train out the branches as much and she grew tighter together, so I removed mostly all inner growth blocking light and that allowed a lot more penetration and flow. Left a few leaves below to die off naturally…more the better. Gonna put some Grub Grenades in the pots with some yellow sticky cards. Not because I see anything, just being cautious. I do see what looks like Springtails but don’t seem to be an issue yet. Still looking green and healthy so I’m happy! Grow on! Update Made a few adjustments. I let the tops grow into the tsw2000, 18” to tops. I didn’t like how they looked so I raised it back to 24” where I’ll keep it. The “Kind LED” I know from previous grows that it can’t get closer then 24”. But this is my first run with “Mars” so I’m still figuring out the distance for my setup with additional overlapping light intensity from other lights. With that being said another pod failed so I’m down 2-Kind LED’s now. Gonna remove all old tech and use all newer TS series lighting. All Mars moving forward. Seems to be a great light and when compared to other quality lights you can’t beat the price!

Hey all, its our 2nd week after casing drop. Facing some issues with Night temp, sometimes it could fall to +12C, thinking about how to improve it. Also concerned about slow growth because of that. Using just 1/3 of Plagron recommended dose. Modified a bit my tank, made some technical window. Also set up automatic irrigation, because wool started to dry up during the day Upd Sunday 10.12.2023, Decided to put Babys finally to Seramis. Washing ceramics is some kind of hell: -First, I decided to sift all the dust through a sieve, stood in a half-bent position with bags of Seramis for 30m (my back didnt like it), but there was a lot of dust. -then I decided to check the Ph and rinse thoroughly. Although the package says 5.5-5.7 Ph, after the first flush with a balanced solution at 5.5 Ph, there was 6.5 in the drainage. - I was concerned by the very muddy brick colour water, then got tired of mixing 5.5 in a bucket for flushing and decided to rinse it with tap water from shower and then balance it back to 5.5 Ph . As a result, I poured from the hose for another 30 minutes until the water became more or less transparent. -I also tested FloraFlex discs, they drip great and, although round, fit perfectly into my square grow bags. -Meanwhile, the Milwaukee Ph meter broke down, even the readings of the calibration buffer were changing from 4-6 Ph within one minute. In the end, I spent another 30min and half a bottle of buffer on this too. It’s good that i had yellow Chinese Ph meter, which even after 3 years of rest in the box showed accurate buffer readings. -Finally, the Ph of the drainage was 5.5-5.7 and it was transparent, so I began to move it into the growbox. I sprinkled it as much as I could, it was impossible to dig deeper. The plants do not yet reach the matrix disk, so for now they will grow with the usual felt. -The cap of the tank is very thin and cannot withstand the weight of 2 grow bags, I’ll have to come up with something else, maybe I’ll put some kind of drainage grid. Watering will be from a tank with a mixed solution of 5.8 Ph and 1.1 EC.