one of the sturdiest Staples I have ever worked with and had the pleasure to work with.

28th week for critical the critical was very resistant, very strong but had like 50 seeds maybe for stress or defected seed

The buds shine like a shooting star mad sticky too⭐️ First thing that hits me with the smell straight up like canned pineapples in syrup🤤🍍

Day 59 week 3 of

.

Alles gut, macht sein ding ! 😜

Another veg week for the original sensible seeds girl Scout cookie auto. (I don't know why the other weeks say flowering I'll have to change them.) Nice growth on her and looking healthy shes on a weekly (when I remember) bio buzz triple, tap water and any homemade nuits knocking around. She's had her top chopped to split the main cola and some trimming of lower buds that won't have long enough to mature. I'll be shaping her some over the next week or two with LST, supercrop ( now a tradition more than a requirement) for her new home the converted cupboard which requires a more rectangular canopy. She's probably 2 weeks away from 'The stretch' (I don't know if its a real thing the strech but its a term I like to use anyway) in my head it goes -seedling - veg - signs of flower for about two weeks - Stretch week or two. This is the phase where by if you don't check on her for a day or two all of a sudden you've got a tree in your cupboard -Bud fattening -Harvest

3/16 234AM MONDAY POTATO N WEEK CELEBRATIONS! The plants in your photos look like healthy, vigorous **RF3 autoflower seedlings** (likely Banana Purple Punch Auto RF3 or similar from Fast Buds' upgraded RF3 line, based on the context of your previous grows with their genetics). They're in early vegetative stage at around 3 weeks from seed—nice bushy structure, good node spacing, dark green leaves, no major deficiencies or burn yet. The coco medium shows some perlite mix, and they're in small pots with what looks like a well-draining setup. Solid start **RF3 autos** from Fast Buds are bred for stability, vigor, and resilience (often with heavy resin, dense buds, and good yields), but like most modern autos, they're sensitive to overfeeding early on—especially in coco, where salts build fast if not managed. ### Recommended EC at 3 Weeks (Early Veg/Pre-Flower Transition) At week 3, autos are usually ramping up vegetative growth and may start showing pre-flower signs soon (pistils around nodes). Fast Buds' general autoflower feeding advice (from their guides and nutrient articles) emphasizes starting low and going slow: - **Target EC: 0.8–1.2 (800–1200 µS/cm)** in the feed solution. - Start at the lower end (~0.8–1.0 EC) if your plants are still very young-looking or if you've had any tip issues before. - Push toward 1.0–1.2 EC if they're hungry (rapid growth, pale lower leaves) and responding well—no burn. - This is often ~400–600 PPM (500 scale) or ~560–840 PPM (700 scale), but always go by EC meter for accuracy in coco. - Always measure **runoff EC** too—aim for it to be no more than +200–300 above input to avoid salt buildup. If runoff is much higher, do a light flush with FloraKleen (like your 4 mL/gal plan) before bumping up. - pH the feed to **5.8–6.2** (coco sweet spot), and water to 15–20%+ runoff every feed to prevent the issues you've seen with Purpinator/salts. Many growers with Fast Buds autos (including RF3 lines like Banana Purple Punch or Cherry Cola RF3) report week 3 feeds around 0.9–1.1 EC in coco/hydro setups, starting lighter if using tap/soft water like yours. Your previous success with lighter Maxi feeds post-flush at ~900–1300 EC later on fits well—don't jump straight to 1.3 yet at week 3; build gradually. ### Recommended PPFD (Light Intensity) at 3 Weeks PPFD (Photosynthetic Photon Flux Density, in µmol/m²/s) measures usable light for photosynthesis. For autos in early veg: - **Target PPFD: 300–500 µmol/m²/s** at canopy level. - 300–400 is safe and conservative for week 3—prevents stretch or light stress while encouraging compact, bushy growth. - 400–500 if plants are stretching a bit or you want faster veg (RF3s are vigorous, so they can handle it). - Avoid over 600 early—autos can bleach or foxtail if blasted too hard young. - Measure at the top of the canopy with a good PAR meter (or app like Photone if calibrated). In Indio's setup (likely LED or HPS?), hang lights higher early (18–24" for LEDs) and lower gradually as they grow. - Keep 18/6 or 20/4 light schedule—autos thrive on consistent long days. General tips for your RF3 at this stage: - If using Maxi series (like your previous grows), mix a light bloom/veg combo—e.g., mostly MaxiGro early, transition to MaxiBloom as pre-flower hits. - Watch for clawing (N excess😂) or tip burn (high EC)—flush lightly if needed. - These RF3 upgrades are forgiving but love good airflow and moderate feeds for those dense, resinous buds. Your plants look primed for a strong run—keep that intuition going! How's the light distance/setup right now, and what's your current feed EC looking like? Any pre-flower signs yet? Drop more pics if they stretch or change post-week 3. You're killing it in coco—keep observing runoff and leaves. 🌿🚀 3/19 330am 👨‍🔬 **Adding L-Proline (the amino acid supplement growers use) to plants on soft water can provide some helpful support against the stresses you're dealing with, but it's not a full fix—think of it as a stress-buffer rather than a mineral replacement.** Soft water (low in calcium and magnesium) often triggers **Ca/Mg deficiencies** in bloom stage (especially with Cha Ching or MaxiBloom, which don't supply much Ca/Mg on their own). This leads to issues like tip burn, leaf curl, weak cell walls, nutrient lockouts, oxidative damage (ROS buildup), and overall plant stress that feels like "the plant is struggling to hold it together." Proline steps in here as an **osmoprotectant**—it's one of the compounds plants naturally ramp up under stress. ### What Proline Actually Does in This Situation - **Helps with osmotic/water balance** — Soft water can disrupt turgor pressure and water movement inside cells (similar to mild drought or salinity stress). Proline stabilizes cell membranes and helps the plant retain water better, reducing wilting or limpness. - **Reduces oxidative stress** — Ca/Mg shortages cause free radical damage. Proline acts as an antioxidant and protects proteins/enzymes, so deficiency symptoms (yellowing, spotting, slowed bud development) don't spiral as fast. - **Improves overall resilience** — In cannabis and general hydro/soil grows, L-proline (or full amino acid mixes containing it) has been shown to boost stress tolerance, speed recovery, and even support better nutrient uptake indirectly. Studies and grower reports note it helps under nutrient imbalance, drought-like conditions, and environmental swings—exactly the secondary stresses soft water creates. - **Bloom-stage bonus** — Since you're already in late flower with Cha Ching/MaxiBloom, proline can support resin/terpene production and bud density without pushing excessive veg growth. It won't magically add the missing Ca or Mg (those are still critical—soft water + high-P bloom nutes often screams for CalMag), but it can make the plant more tolerant while you correct the root issue. ### How Much Effect to Expect Right Now - **Positive but moderate** — Many hydro/RO growers add amino acids (including proline) specifically for soft water setups and report less burn, better leaf health, and stronger finishes. It won't turn a severe deficiency around overnight, but it can slow the damage and give your plants a fighting chance in the final weeks. - **No downside at proper doses** — It's very safe and plants use it quickly. ### How to Add It (Practical Dosing) - **Source**: Pure L-Proline powder (available cheap online—make sure it's the plant-grade L-form, not human supplements). - **Root feed** (with your Cha Ching/MaxiBloom): Start at 0.5–1 g per gallon (about 100–200 ppm). Mix into your res or feed water once a week. pH as normal. - **Foliar spray** (often more effective for quick stress relief): 0.25–0.5 g per gallon + a drop of surfactant. Spray lightly every 5–7 days in the dark period. - **With your current nutes**: Yes, it layers fine—reduce if you see any tip burn. Many run it alongside MaxiBloom + Cha Ching in soft water without issues. - **Best timing**: Now through harvest is perfect, especially if you're noticing stress signs already. **Real talk**: The biggest win will still come from adding a proper CalMag supplement (like Botanicare or General Hydro's) at 0.5–1 ml/gal or whatever your PPM tests call for. Proline + CalMag together is a strong combo for soft water grows. If you're running pure RO/soft, most experienced growers treat this as standard.""👨‍🔬 3/19 10:09PM RF3 X 2 =6 fail? I have TWO 2 gallon pots filled with coco from the last grow. I can plant a NEW BPP RF3 OR!!! I can top the 3 RF3's and make cuttings and grow the cuttings? It worked before!. FAST turnaround time, not much prep just refresh the coco and transplant the tops! 3/19 10:59PM NO WORK FOR NOW.. HIT WITH MASSIVE WAVES OF NAUSEA AND SHARP PAIN, DIZZY, RUPTURED NECK CYST BLEEDING, PAIN FROM MOVING TOO MUCH LAST FEW DAYS, RINIGNG EARS BAD, SKIN PRONE TO MASSIVE INFLAMMATION ATTACKS NOW, WEAKENING GUT LINING,. LUNGS ..GRIP AND BALANCE OFF, SO PERFECTLY NORMAL!!! THANK THE WEED GODS FOR WEED. 3/21 3:30 AM I think I’m gonna top all three of them. I got lucky all three seem to be different ones. I don’t know which is which one of them is really tall. The other one has really tight in her note spacing it’s really good and the other one is also good little bit different so I think I got three different RF three seeds and I think if I do top them I’m gonna put the top in another 2 gallon and then grow that as a cutting usually works I’m not sure👍🌿 3/23 3:08 PM I cut them all in half today a transplanted the top of the tallest one into one that was still growing just to see if it would work. They’re all doing really good.👍 326 237am Remember how your local ss cant prevent or solve a single problem you pay taxes for. unless you're really really sick and the cowards decide that the most important and pressing issue is to raid weed users and farms and seeds...what a country of fuqs

Week 1 27/01/2025 TF and MS Feed HydroSol: Increased to 8ml/5L 28/01/2025 TF and MS Light Increased: 313watts DLi: 35 Rapid Growth has started again. Feed Increased: HydroSol 10ml/5L HP 12%: 1ml/5L Uploaded today's pictures and yesterday's for comparison on how HydroSol is doing? I topped MS. Hopefully by doing this now TF will catch up but that's not why I topped her. She's known for being bushy; so will be good to bring her up to her second level before branching. Giving the rate she is growing; we haven't to worry about stunting Growth. H202 is also know to to cause mutations at high levels. I tried to start this diary with HP 12% from seed and it worked until micro-organisms in the air and water; what distillation has missed the "vocs" the cardon didn't catch. Caused them to later on because of free radicals and this is why high levels of HP can cause mutations and cancer when it steals atoms by ripping them apart. "Call the bomb swaddles" when mixed correctly or 'incorrectly 💣 lol 28th Today Little VT of the 5L jerry can starter pots (DiY) I think this process is allowing for optimization of Air/feed pks. I'm at least 2-3weeks ahead from a normal grow because of this style growing. I know, I know, I lost 3weeks from the first failed attempts. But it's okay 👍 I'm okay with that. Now I know and it's logged in the dairy for future reference I can quickly glance over before I start another one. Like hey 👋 "Time is valuable, read ya diaries" honestly, I don't have dementia i have human forgetfulness/error. Its still in the experimentental phase. Took tf out the propagator 31/01/2024 Nothing much to see I've did everything for TF and still looking droopy. Exactly the same as MS. I think she'll grow out of it! 01/02/2025 I know, I know what ya thinking, it looks like spider mites on MS only leaf but honestly I think its of the h202. I deffolled her only leaf. Sprayed it with h202 and no reactions happen. No mites. The Future TF is looking much more lively. Oh well. No speed-run this time round! I shouldn't of took 4wks off from growing. Rhythmic nature of thing and getting in the swing off it. It's easy to do but I am always in two minds with everything I do. I can't help but cause "Self sabotage' every time I get to ahead of myself, by running my mouth 💯 blah blah blah; always beside myself. Aye' they say "God is next to Cleanliness" if that's true it'll be impossible for me to be beside myself haha 😄 Its all fun and games 🎮 🙃 01/02/2025 Midday Light Increased: 560watts (max) for this power supply. I disconnected the 1200watts one for each light is 600watts. It's currently half-power with 600watts max for two lights at 300watts each. Better than having mishaps with the full power supply 1200 being turned up accidently say in a not ventilated enough little tent. I'd rather pass on that anxiety 🙃 Plants: Under jerry cans with dli at 20. This should by dinfintion let them gather themselves for 3days; while the sun is blazing outside the can. Even though I could lower the light. I think the high light intensity outside the cans the plants know. Midday VT MS looks likes shes a clone 😳 👀 but she ain't! One day I will get these protocols right. But atm ; atlas, it's all in jest n fun! MS defiantly looks like a clone but she's not; i have taken pictures since she hatched everyday 03/02/2025 Midday Freaky Pablo and The future 2 germinated Sprayed with weak solution of Hydroclonic Acid + h202 very mild. Now the fun begins!

Getting ready couple weeks left

It's the 4th week! Stilling doing the mainlining, for some reason I found myself training the branches to form a bull horn shape, maybe I'll mount it on the wall after this first grow, lmao. I added more CalMag this week, as now I'm thinking the rust/brown spots and tips are from a Calcium deficiency since I am using distilled water. Time to watch these leaves, and if it continues to rust it might be the VPD. Nov 28th - pH 6.0, PPM 860, 1.7 EC, Temp 70f, Humidity 50% Nov 29th - pH 6.3 -> 5.8, PPM 860, 1.7 EC, Temp 80f, Humidity 55% Nov 30th - pH 5.8, PPM 860, 1.7 EC, Temp 80f, Humidity 60% Dec 1st - pH 5.9, PPM 860, 1.7 EC, Temp 80f, Humidity 70% Dec 2nd - pH 5.5 -> 5.9, PPM 840, 1.7 EC, Temp 80f, Humidity 60% Dec 3rd - pH 5.9, PPM 810, 1.6 EC, Temp 80f, Humidity 70% Dec 4th - pH 5.7, PPM 790, 1.6 EC, Temp 80f, Humidity 70%

The Big Detroit energy will be my go to Strain taste smell and appearance all there!

expected flowering: 7-8 weeks Germination method: cotton disc with tap water with 4ml/l root juice and 1ml/l acti-vera Tent: BlackBox Silver 90x60x180cm (3'x2'x6') Extractor: 220 m³/h Soil: Biobizz All-Mix SF-2000 @85cm @50% germination: 10/11 They took a little longer than usual to open up, all but one seem to grow vigorously enough afterward. sprout: 9/10 ; 9 transplanted in soil at first then another one transplanted 36H later i may transplant the last one if the root finally start to grow. First two are showing 20h after transplant. 35h after transplant 7 are showing. 42H after transplant 9 are showing and seem to form their first set of true leaves normally. Last one showed a little later but doesn't seem to form it's first true set of leaves.

This week I had some problems with the electricity .. Now everything is fine, and the plants are fine .. They have resumed their normal growth .. Another 4 days and I will switch to flowering

Day 38 I am very happy with how they are growing. finally begins to flourish, the LST seems to have paid off. from last week I started giving green sensation 1ml / l without adding anything else. thanks for viewing it is my first growth if you see errors comment and correct me. hit like and follow me for updates. happy day and good luck with your growth 🌱💚

Just letting her do her the now . She looks and smells amazing at the moment.

Day 23 stacking and packing!!! She’s getting stinky and dank...... got a slight nutrients burn on a couple remo nutrients plants been flushing to get the EC down lots of growth lots of trichome

This was another very good week for the plants, with the flowers beginning to swell up and take shape. Some of the lower leaves are starting to yellow, but this is expected. As the light doesn't penetrate as far, the plant will begin to 'consume' those leaves and drop them to redirect energy to the tops. The canopy is fairly even apart from 1 small spot, which does not have any colas at all. This is due to me bending away the GSC that was topped, with the intention of the lower branches stretching up. This happened with all the other plants I did it to, but not this one for some reason. I think it was due to airflow around the budsites so I added an extra fan last week to hopefully improve this. The strongest looking plants by far are still the ones that were Topped with LST, followed by the mainlined, with only LST in last place. I have found that the LST only ones do not have stems as thick as the others, so this may impact yield later. Not much done in the way of training apart from the odd leaf bending or stem tying. The next few weeks will most likely be fairly uneventful, as now we just need to wait for them to flower fully :D