Likes
Comments
Share
@Labar
Follow
Harvest day. 61 bloom days to finish it. It is going to dry step. 2 girls which smell very good, gsc origin is present in this cross, smell apple too, propably from glue. No difficulty to grow glookies, easier strains. The harvest looks generous. 2 plants in my small area is a nice setting with shallow/low container. resum hard setting: Spiderfarmer 100w set to 60-80% capacity during the grow step. Viparspectra set to 50-70% capacity during the bloom step and 2 Tled 20w side/bottom light at the end of Bloom step. (Then 160w during bloom) 2 circulator fans in Bloom area 1.5w x 2. One circulator fan and one extractor fans in grow area 1.5w x 2. 1 extractor fans 170w set up to 30% capacity. Purpose: Small area, low height, decrease electricity if possible. 1g/w target. Organic nutriment and natural soil. Decrease hand work. Decrease smelling! More tasty!
Likes
25
Share
Info: Unfortunately, I had to find out that my account is used for fake pages in social media. I am only active here on growdiaries. I am not on facebook instagram twitter etc All accounts except this one are fake. Have fun with the update. Flowering day 26 since time change to 12/12. Hey everyone 😃. Another great week goes by. Last week, instead of 2 g of GHSC Powder Feeding, I only gave 1.5 g p l of substrate so that I can give you another 1 g per l of substrate next week so that it lasts until the end :-). It is developing very well and the buds are starting to grow :-). The week was poured 3 times with 1.1 l each time. once of them GHSC Enhancer was added :-). The bottom shoots have now also been removed :-). As always, the humidifier was refilled every day and the lady was checked for her health. I hope you enjoy the update. Stay healthy and let it grow 😊🍀. You can buy this Strain at : www.Zamnesia.com Type: Purple Punch ☝️🏼 Genetics: Granddaddy Purple x Larry OG 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .
Likes
8
Share
GSCE is making crazy gains. The BB has also started to pack on great weight but much more bushy and has passed the GG4 in both size and appetite. As for the GG4 for not sure why she slowed down for a little while but as of today(Day30) she is starting to strech out more like the GSCE. The rando bag seed is starting to really take off as well noticed small pistils starting just a couple of days ago. Bumped the watts up to 290w(85%) probably wont go any higher. 4/11 Week 5 has ended and im more then pleased with the results so far being that this is my very first time growing. The GG4 has shown the most growth these past couple of days as far as the autos go. The bag seed on the other hand had streched at least 8" in less than 1 week. If anyone has any suggestions, tips, criticism whatever ill take any and all of it.
Likes
11
Share
I will always go organic from now! Especially using rqs nutrients had the best grow and the best outcome I’ve ever had! Dense buds all over and end weights matched that! And I didn’t even top it or stress it Too much! Wanted to see what happened if I just let it grow and I’m amazed! Royal queen seeds deserves the top place!
Likes
24
Share
I needed a bigger reservoir, runoff catchment, and dehumidifier drain bucket because I had to go out of town for 5 days. Fortunately I calculated the volumes accurately and so when I got home I had at least another 24 hours of solution in the rez, and space in the runoff and dehumidifier catchment buckets. The other fortunate thing is that I came home to very happy and vigorously growing plants. The tallest colas are now 30 inches above the coco, and 20 inches from the light. There is one cola (pictured) whose stem is as thick as a sharpie! I ran out of the AN base nutrients and decided to switch over to GHE because the PH perfect buffers in the Advanced Nutrients line have been a huge pain in the ass. Also, I decided to mix my own bloom booster from Potassium Sulphate (0-0-53), Monopotassium Phosphate (0-52-34), and Epsom Salt after finding a DIY recipe (https://www.thcfarmer.com/threads/diy-hammerhead-confusions.47992/) to achieve a (0-9-18) NPK ratio. Significantly cheaper, but will be interesting to see what the results are in the end. I will be doing one more heavy defoliation on day 21 of flower because there are so many fan leaves laying on top of each other that its hard to keep the humidity down. Stay tuned!
Likes
4
Share
I was dealing with weird tacoing of leaf tips. Never had it before. Also the tips were light green. I think it was a bit of shock when changing light spectrum. Although the intensity was pretty low. Lamp was set only on 250w for a 5x5 space. Maybe it was a bit too low. I think the issue resolved itself in acouple of days and after switching to 12/12 . DLI dropped and plants recovered fast. They seem to grow beautifully now.
Likes
102
Share
@Hashy
Follow
Light settings 12/12 on at 9.00am off 9.00pm Light power= 62% 150w Radiator settings LIghts on Turn on if temp drops below 23c Turn off if temp goes above 23c Lights off Turn on if temp drops below 19c Turn off if temp goes above 19c Dehumidifier settings LIghts on Turn off if humidity drops below 60% Turn on if humidity goes above 60% LIghts off Turn off if humidity drops below 62% Turn on if humidity goes above 62% Extractor settings temperature 24c with 1c steps Humidity 54% with 2% steps Max speed 9 Min speed 4 VPD aim 0.8-1.2 Wednesday 1/3/23 Day 36 Autofeed 5 15 minute runs Water 10L Ec=0.21 Ph=6.5/7.0 3L left Roughly 2.3L each. #3 no runoff 7.15pm Lowered light 3cm #3 DLI= 31.4 Thursday 2/3/23 Day 37 10.00pm Extractor settings temperature 24c with 1c steps Humidity 54% with 2% steps Max speed 10 Min speed 5 Friday 3/3/23 Day 38 Autofeed 5 15 minute runs Feed 10L Ec=1.73 Ph=6.3 2.5L left. Roughly 2.5L each. #3 run 0.3L Ec=3.78 Ph=5.8 Saturday 4/3/23 Day 39 5.00pm #3 Height= 40CM Dist= 30CM DLI= 37.9 Lifted lights 3 clicks and Lst and defoliate Sunday 5/3/23 Day 40 Bit of Lst and scrogging Monday 6/3/23 Day 41 Autofeed 5 15 minute runs Feed 12L Ec=1.78 Ph=6.3/6.3 4.5L left Roughly 2.5L each. #3 no run #3 DLI=38.0 #3 showing signs of light stress. Lifted light #3 Height= 38CM Dist= 38CM DLI= 28.6 Tuesday 7/3/23 Day 42 (Day 14 flower) Radiator didn't come on when it should have. It was cold today and I don't understand why the sensor didn't trigger the Radiator. #3 Height= 38CM Dist= 38CM DLI= 28.6 The 2nd week of flower has gone well. I have tried to keep the canopy of the overall grow as level as I can, the only problem with running different strains is they all have different traits and grow at different speeds. Nearer the end of the week the weather started getting cold again so the radiator is going to be working a bit more over the next week or 2. #3 Gorilla Cookies FF is just mega, she has been stretching so much throughout the grow and has 90Deg bends all over, a snapped main, a few damages sides but not as fucked as the main and she is still doing champion. Its been hard work keeping her the level of the others but she has a shit load of space, way more then the other 2 strains. Power used for week Light (1.77+1.84+1.84+1.84+1.84+1.83+1.84)=12.8Kw Extractor (0.19+0.24+0.25+0.27+0.31+0.31+0.41)=1.98Kw Fans (0.48+0.47+0.47+0.47+0.47+0.48+0.48)=3.32Kw Dehumidifier (0.69+0.65+0.0+0.01+0.6+0.02+0.69)=2.66Kw Radiator (3.3+3.98+3.38+3.16+3.8+3.31+4.07)=25.0Kw Water pump. (0.02+0.0+0.02+0.0+0.0+0.2+0.0)=0.24Kw Total for the week=46Kw Back in a week. Thanks for stopping by.
Processing
Likes
54
Share
@rhodes68
Follow
3/18 Week 12 Day 33/Flower Have a Norto virus in the house so being brief All looks good no changes at this time waiting on buds to say when Tricones 80% Milky 20% clear with no amber so at least a week to go before flush 3/19 Pics Lot happened overnight, looking like end of week for flush. Will continue PK for one more day as time for the last push here now as upped nuets about 200ppm. PK ends Friday, nuets will drop back 200ppm at the same time. Flush begins 3/24 Tuesday... 08:05 PDT ... 😏 3/21 Day 36/Flower Ended PK dropped CT to below 900ppm On track for flush mid-week which will be real close to Fast Buds estimate of 45 days. 3/22 D 37/F Pics Just waiting for the ripening and flush day next week. Trics pretty much all white now, still no amber but that will come during flush. Will be dropping nuets to half Monday on last feeding. 3/23 D38/F Last feeding at half strength but tossed in a dose of Recharge just to see if it matters. doubt it would but it needed using as it hitting its effective date. Flush begins tomorrow morning 3/24 D39/F Flushed each using 10 gallons PHed tap water and 5ml/gal flushing agent. Pics and vid 3/25 D40/F Runoff @235ppm about 80 ppm over the water ppm so looks like the pot is empty and we can cease the FloraKleen those roots are stripped and I am no rush on this flush.
Likes
14
Share
Started the flush 4 days ago. The main cola on this beast is the size of a 2 litre soda bottle. If I don't get 150g+ of this plant I'll be amazed.
Likes
3
Share
@P_Silas
Follow
Season 2 is officially underway and so excited for this grow. Growing 4 plants, but space is a lil limited. Growing in an 80x80cm so using small pots. 2x 8l and then 1x 5l and 1x 4.7l (if you wanna be exact lol). This time I decided to experiment a bit. I'm testing 2 different soils, both in 8l pots, both Purple Punch Auto by Fastbuds, both in airpots. Their names are Robin and Lily. Also testing fabric bags against airpots. Both in same soil, both in 5l pots, both Wild Dwarf Auto by Bulk Seed Bank (that was the plan but now it's 1 WD and another Purple Punch). Their names are Jess and Cece. For this one, Robin, had the seed in water for about 24 hours then in paper towel. Then, into Living Organics soil.
Likes
31
Share
@Tweak
Follow
So I finished my slow transition to flower yesterday, I increased “night” by 20 min everyday over 21 days to get from 18/6 to 11/13. She’s def stretching but less then would be expected with this strain if it was an abrupt switch. Enjoy and give me a like!!
Likes
13
Share
@NanoLeaf
Follow
End of week 10 and so close to harvest! I have finally decided to chop the Purple Lemonade because she has been ready for a few days now literally oozing out sweet sticky sugars and the trichomes were about 70/30 cloudy to amber ratio. The other plants are about 90/10 and will be chopping the ladies soon. Smoothest grow I’ve had. Also only the 2nd (Indoor) grow. It’s nice to see some progress and will always try pushing to grow better and frostier flowers. One love!
Likes
4
Share
@UKBUDBROS
Follow
2 of the plants are now budding, 6 are autoflowers and 2 are fast flowers. Still having some problems with bits of browning and yellowing I haven’t managed to figure it out yet. The plants have been being fed and watered as I usually do and they are still growing nicely and producing more green growth each day. If you spot any problems I haven’t noticed or notice something off with my plants please comment as I am still learning a lot about growing and welcome any help 🍀🤙
Likes
68
Share
@Joni2017
Follow
Day72, the pistils are getting brown and some trichoma starts to have amber color 😋 a more watering with nutrients and osmosis water until the end. Size 67 cm👏🏻👏🏻 temperature 24º C ☀️, humidity 60% 💧 watering 750 ml 💦💦 Session 45 min. of binaural sounds for growth and healing 🎼 and music 😉👍
Processing
Likes
20
Share
Since I am in DWC and the fertilizers are organic, I take care to add them slowly.. Como estoy en DWC y los fertilizantes son orgánicos, me ocupo de añadirlos lentamente... Por el momento no controlo la atmósfera, sólo tengo un extractor ajustado a 400m3/h para los 2 lumatek al 75%. Planeo controlar la atmósfera a partir de la inyección de CO2 en la semana 2 o 3 para ver más. Mientras tanto tengo algunos picos de temperatura por encima de los 28 pero son realmente específicos. Estoy tratando de mantener la humedad lo suficientemente alta para tener un buen VPD. For the moment I don't control the atmosphere, I just have an extractor set at 400m3/h for the 2 lumatek at 75%. I plan to control the atmosphere from the CO2 injection in week 2 or 3 to be seen again. In the meantime I have a few temperature peaks over 28 but they are really specific. I am trying to keep the humidity high enough to have a good VPD. Subí un poco la ec este fin de semana 4 de 0.9 a 1 I turned up the ec a bit this weekend 4 from 0.9 to 1
Likes
1
Share
@CaliJ
Follow
everything went well, I preferred to wait 11 weeks and the result is there. good variety to be in a good mood during the day even if a little light for me 😁