I have started flushing with pH-adjusted Flawless Finish solution, expecting to harvest somewhere around the end of this week, although I will continue monitoring pistils and trichs. Upd: Added back 50% base nutrients and some flowering additives after researching some of the first responses to my flushing question. I learn every day. Even that which was scientifically proven true one day, might be even more scientifically proven absolutely false some time later (not related to flushing specifically). Thank you kings! Upd 2: Okay okay I cooked her with some cosmic rays or whatever those Chinese quantum bars emit — purple rays, I'll call it — that's on me. Turned them 30% down to see what's up. Light burn was not on my mind, because otherwise the leaves were not really curving that much, considering that this is 3 weeks overdue wrt advertised. Sorry about that, did not pay enough attention.

Bit disappointed with the phenotype.

Day 61 - April 11, 2021 Today was full of headaches lol. Checked the PH of the reservoir this evening and it had dropped to 4.6. Algae exploded in the past day. Removed reservoir and pumps and cleaned thoroughly. Thankfully just prepped a new batch of nutrient solution. Humidifier hasn't had to run all week. Will be switching to dehumidifier soon. Foliar Spray (9:30PM): * ~1 Gallon RO Water (EC 0.05) * 5ML Liquinox Iron & Zinc * 5ML CalMag+ per Gallon * 0.5ML Mills Nutrients Vitalize per gallon * PH 5.85 * EC 0.64 Mixed 50-gallons nutrient solution: ** 40-gallons RO Water ** 10-gallons Tap Water (In replace of Cal-Mag+) *** RO + TAP water base ~0.40 EC ** 0.5 ML Mills Nutrients Vitalize (per gallon) ** 8.0 ML Mills Nutrients Basis A & B (per gallon) ** 6.0 ML Mills Nutrients C-4 (per gallon) ** 1.47 EC Watering: 010:00AM-10:08AM ~0.25 gallons per pot 02:00PM-02:08PM ~0.25 gallons per pot 6:00PM-6:08PM ~0.25 gallons per pot 8:00PM-8:08PM ~0.25 gallons per pot Reservoir: * tested 9:45PM * 1.47 EC * 6.18 PH * 74.48F Lights: * Gavita LEDs On 12-hours (10:00AM - 10:00PM) ** 10:00AM Lights On (100%) * Gavita LEDs Off 12-hours (10:PM - 10:00AM) * UV Bars On 8-hours (12:00PM - 8:00PM) Air control: 69F-81F (76F AVG) (Lights On) 66F (Lights Off) 55%-70% (69% AVG) humidity (Lights On) 60%-70% RH (Lights Off) ~1407PPM CO2 (Lights On) ~780PPM CO2 (Lights Off) Day 62 - April 12, 2021 Hands off in the garden today. Watering: 010:00AM-10:08AM ~0.25 gallons per pot 02:00PM-02:08PM ~0.25 gallons per pot 6:00PM-6:08PM ~0.25 gallons per pot 8:00PM-8:08PM ~0.25 gallons per pot Reservoir: * tested 8:45PM * 1.48 EC * 5.95 PH * 74.12F Lights: * Gavita LEDs On 12-hours (10:00AM - 10:00PM) ** 10:00AM Lights On (100%) * Gavita LEDs Off 12-hours (10:PM - 10:00AM) * UV Bars On 8-hours (12:00PM - 8:00PM) Air control: 69F-81F (79F AVG) (Lights On) 66F (Lights Off) 65%-70% (69% AVG) humidity (Lights On) 65%-75% RH (Lights Off) ~1370PPM CO2 (Lights On) ~840PPM CO2 (Lights Off) Day 63 - April 13, 2021 The Titan Apollo 9 timer using for water pumps is glitching out. It's randomly reset 2x over the last couple days. At first thought it was a fluke and maybe bump the reset button somehow. Seems unlikely, it randomly resets clock to 12am and erases the programmed times. Think I'm going to give a smart plug a shot instead (at least I can see notifications if scheduler fails) So far seeing pistols on all ladies. No nannards so far. Will be working on canopy this weeking and will take close look at each. Foliar Spray (9:00PM): * ~1 Gallon RO Water (EC 0.05) * 5ML Liquinox Iron & Zinc * 5ML CalMag+ per Gallon * 0.5ML Mills Nutrients Vitalize per gallon * PH 5.85 * EC 0.64 Watering: 010:00AM-10:08AM ~0.25 gallons per pot 02:00PM-02:08PM ~0.25 gallons per pot 6:00PM-6:08PM (Watering was skipped due to timer glitch) ~0.25 gallons per pot 8:00PM-8:08PM ~0.25 gallons per pot Reservoir: * tested 8:45PM * 1.49 EC * 6.02 PH * 73.76F Lights: * Gavita LEDs On 12-hours (10:00AM - 10:00PM) ** 10:00AM Lights On (100%) * Gavita LEDs Off 12-hours (10:PM - 10:00AM) * UV Bars On 8-hours (12:00PM - 8:00PM) Air control: 70F-82F (80F AVG) (Lights On) 66F (Lights Off) 65%-75% (67% AVG) humidity (Lights On) 75%-80% RH (Lights Off) ~1401PPM CO2 (Lights On) ~795PPM CO2 (Lights Off) Day 64 - April 14, 2021 Watering: 010:00AM-10:08AM ~0.25 gallons per pot 02:00PM-02:08PM ~0.25 gallons per pot 6:00PM-6:08PM ~0.25 gallons per pot 8:00PM-8:08PM ~0.25 gallons per pot Reservoir: * tested 8:45PM * 1.49 EC * 6.19 PH * 73.94F Lights: * Gavita LEDs On 12-hours (10:00AM - 10:00PM) ** 10:00AM Lights On (100%) * Gavita LEDs Off 12-hours (10:PM - 10:00AM) * UV Bars On 8-hours (12:00PM - 8:00PM) Air control: 70F-82F (80F AVG) (Lights On) 66F (Lights Off) 65%-75% (68% AVG) humidity (Lights On) 75%-80% RH (Lights Off) ~1169PPM CO2 (Lights On) ~758PPM CO2 (Lights Off) Day 65 - April 15, 2021 Turned off co2 for 24-hours as I vented air out of the room to help with humidity a bit. Waiting for Anden dehu to arrive. Also replaced the Titan Apollo 9 controller for water pumps as it keeps randomly resetting and has proved unreliable. Testing a smart plug and will create some conditions with IFTTT to send notifications to ensure pumps don't miss schedules, shut off correctly, etc. Plants are doing well. Pistols are popping out faster and faster. Planning to do some canopy management this weekend and will be inspecting to make sure there aren't any pollen sacs forming. Foliar Spray (9:30PM): * ~1 Gallon RO Water (EC 0.05) * 5ML Liquinox Iron & Zinc * 5ML CalMag+ per Gallon * 0.5ML Mills Nutrients Vitalize per gallon * PH 5.85 * EC 0.64 Mixed 50-gallons nutrient solution: ** 35-gallons RO Water ** 15-gallons Tap Water (In replace of Cal-Mag+) *** RO + TAP water base ~0.52 EC ** 0.5 ML Mills Nutrients Vitalize (per gallon) ** 10.0 ML Mills Nutrients Basis A & B (per gallon) ** 6.0 ML Mills Nutrients C-4 (per gallon) Watering: 010:00AM-10:08AM ~0.25 gallons per pot 02:00PM-02:08PM ~0.25 gallons per pot 6:00PM-6:08PM ~0.25 gallons per pot 8:00PM-8:08PM ~0.25 gallons per pot Reservoir: * tested 9:00PM * 1.48 EC * 6.17 PH * 73.04F Lights: * Gavita LEDs On 12-hours (10:00AM - 10:00PM) ** 10:00AM Lights On (100%) * Gavita LEDs Off 12-hours (10:PM - 10:00AM) * UV Bars On 8-hours (12:00PM - 8:00PM) Air control: 70F-81F (78F AVG) (Lights On) 66F (Lights Off) 65%-70% (67% AVG) humidity (Lights On) 65%-75% RH (Lights Off) ~788PPM CO2 (Lights On) ~602PPM CO2 (Lights Off) Day 66 - April 16, 2021 Foliar Spray (9:30PM): * ~1 Gallon RO Water (EC 0.05) * 5ML Liquinox Iron & Zinc * 5ML CalMag+ per Gallon * 0.5ML Mills Nutrients Vitalize per gallon * PH 5.85 * EC 0.64 Watering: 010:00AM-10:08AM ~0.25 gallons per pot 02:00PM-02:08PM ~0.25 gallons per pot 6:00PM-6:08PM ~0.25 gallons per pot 8:00PM-8:08PM ~0.25 gallons per pot Reservoir: * tested 9:00PM * 1.80 EC * 6.11 PH * 74.30F Lights: * Gavita LEDs On 12-hours (10:00AM - 10:00PM) ** 10:00AM Lights On (100%) * Gavita LEDs Off 12-hours (10:PM - 10:00AM) * UV Bars On 8-hours (12:00PM - 8:00PM) Air control: 70F-82F (79F AVG) (Lights On) 66F (Lights Off) 65%-70% (70% AVG) humidity (Lights On) 65%-80% RH (Lights Off) ~1234PPM CO2 (Lights On) ~660PPM CO2 (Lights Off) Day 67 - April 17, 2021 Worked on Canopy for F2, F3, F6, F7. Will work on other four tomorrow. ETA of Anden Dumidifier is next weekend. Foliar Spray (9:30PM): * ~1 Gallon RO Water (EC 0.05) * 5ML Liquinox Iron & Zinc * 5ML CalMag+ per Gallon * 0.5ML Mills Nutrients Vitalize per gallon * PH 5.85 * EC 0.64 Watering: 010:00AM-10:08AM ~0.25 gallons per pot 02:00PM-02:08PM ~0.25 gallons per pot 6:00PM-6:08PM ~0.25 gallons per pot 8:00PM-8:08PM ~0.25 gallons per pot Reservoir: * tested 9:30PM * 1.80 EC * 6.39 PH (Will top off and Reduce PH ~6.0 with GH pH down tomorrow) * 74.30F Lights: * Gavita LEDs On 12-hours (10:00AM - 10:00PM) ** 10:00AM Lights On (100%) * Gavita LEDs Off 12-hours (10:PM - 10:00AM) * UV Bars On 8-hours (12:00PM - 8:00PM) Air control: 70F-82F (74F AVG) (Lights On) 66F (Lights Off) 65%-70% (69% AVG) humidity (Lights On) 65%-80% RH (Lights Off) ~1442PPM CO2 (Lights On) ~701PPM CO2 (Lights Off)

UNOS 14 DIÁS DE FLORACION, EMPEZAMOS CON EL BIG BUD, Y NUESTRAS PLANTAS ESTÁN RADIANTES DE ENERGIA

So this was a simple going grow!!! It’s strange how the hot so big under the light! I had one blue cheese under the same light and tent and it was way smaller!! Anyway 1 of these has come out perfect very happy the other two I’m not to sure the hairs were still pointing up but I really don’t have the time to have them going another week there already over the time they was supposed to be done but yeah I’d say out of 10 I’d rate this blue cheese growing experience a 6 out of 10 hopefully this improves when it’s dry!!!

Ph was off Everything will be okaaaay 750ppm this week Plant started go better fast

first try at mainlining, so far so good. they are loving the new light XS 1500 Pro currently running 25% due to some leaves curled a bit at 50% thinking of running rhe rest of the week on 25 and then switch back to 50.

All feed is based in 5️⃣ litres for this update And our germ room.is our philzone 6️⃣0️⃣0️⃣w at 5️⃣0️⃣% pulls around 1️⃣1️⃣0️⃣ true watts will get a reading next run. Then in week 2️⃣ they go to tge big girl pit with tye super lumen

✋Ding Dong le Cut a sonné pour les belles demoiselles la semaine dernière après une belle floraison J'adore son feuillage qui à fait une belle sénescence et surtout c'est feuilles légèrement violet 😍 Remplit de trichomes 😍 Partis pour une petite semaine minimum de séchages et en bocaux 😎 Je vous dis à bientôt pour le résultat final 😉

Week 16 (26-1 to 31-1) 26-1 Temperature: 28.2 degrees (lights on) 19 degrees (lights off) Humidity: 66% (highest) 48% (lowest) Watering: Both 2000 ml. (Flush) 27-1 Temperature: 27.5 degrees (lights on) 18.4 degrees (lights off) Humidity: 65% (highest) 48% (lowest) Watering: None. 28-1 Temperature: 27.2 degrees (lights on) 18.2 degrees (lights off) Humidity: 66% (highest) 48% (lowest) Watering: None. 29-1 Temperature: 26.9 degrees (lights on) 18.4 degrees (lights off) Humidity: 64% (highest) 47% (lowest) Watering: Both 2000 ml. (Flush) Today i checked the trichomes and they are all milky. I will remove all the large fanleaves and i will let them stay in the dark for 48 hours before i will chop them down. 30-1 First day of darkness. Temperature: 27.9 degrees (lights on) 18.8 degrees (lights off) Humidity: 65% (highest) 48% (lowest) 31-1 Second day of darkness. Temperature: 24.5 degrees (lights on) 19.5 degrees (lights off) Humidity: 65% (highest) 50% (lowest)

new life is born I will do my best to make this beautiful girl grow up big, healthy and beautiful. Together we will see what kind of girl she will grow up to be

I plan to grow the best 2 in hydro and the best 2 in soil On 40% power Big Thank you to Medicgrow for the opportunity to use the LED - I am under no pressure or obligation to promote this item , I will give you my honest opinion, and we will see the results , it’s actually a bit bigger than imagined , first test with the lux meter showed awesome spread and distribution, I have one thing that I didn’t understand, using the hangers , you need a degree in engineering to understand , I looked , I pondered, I scratched my head a little smoked a joint , still couldn’t comprehend,so I used 6 ratchets = 🤪 All of them are cuttings I took from a naughty strawberry cheesecake Ps The big green power supply there’s nothing to do with the medicgrow fold 6 ,( the power supply is in the middle )it’s from another light that I just can’t be bothered to move because I’ve got nowhere to put it Wednesday-watered the soil , topped up the pots and added 2ml of A+B hydrogrow Thursday upped the power to 60% this is the recommended setting , but I was a little cautious, I didn’t want to burn anything Probably going to cull down to 6 this week , 3 of each - throw the others - see what happens

Die letzte Woche vor dem Stretch, mal schauen wie sie diese Woche wächst :)

Nutrients listed are for the LSD-25’s. I figured since I had such a rough time, others might too. Watch pH on these ladies. Constantly. Keep nutes on the weak side. When I went 1/2 strength, they didn’t like it. Go really easy to start. Too much is easy with them. Got a little nute burn on the tips of the Gelato on Saturday afternoon. Switched out the solution.

Wife didnt find it, Astroboy didnt steal it. Win the harvest here; https://www.instagram.com/tv/CGso4fHHwyP/?igshid=1bqkgoz580wim Check use @BeanswithPork to see how to really present a video with class and style Thanks for looking, you are too kind

I stopped with fertiliziers, i didn’t watch the tricomes until two days ago… There a lot of its ambred… it’s too soon if i follow the farmer’s schedules The pineapple needs at least 2 weeks, the other 10 days.. I think I will harvest them all in 14 days.

Salut les cultivars sa roule ?! Ici ça pousse bien je pense... je suis à croissance +26 j'ai remarqué des petites pistils aujourd'hui sur la critique et la moby je pense que sa fait deux jours qu'elle sont présente elle sont timide lool pas de souci particulier j'arrose entre 3 et 4 jours environ 0.5lpar pot avec de la mélasse de canne à sucre mélanger à l'eau de robinet reposer plus de 48h... Et j'aimerais savoir à quelle moment je doit compter le premier jours de floraisons svp ??

Once again she passes my expectations, late to the show with trichome production. I'm surprised there is purple on the bud, maybe Purpinator does work. I thought I could see hints under the grow lights and thought my eyes were deceiving me, I was just being hopeful. But nah 2 of the 3(under the UV) have developed a beautiful tone of purple. I was never going to bother with a deep freeze but maybe the whole bud will change given conditions, that would be something, fingers crossed. 🤔 was a little skeptical that reducing temps humidity would change density, but it does, buds are solid something I've not been able to achieve before. Rule of thumb is never to surpass 60% RH in the flowering phase and try to progressively reduce it down to 40% in the last 2–3 weeks before harvest. The plant will react as it seeks to protect its flowers, responding by producing denser buds and a higher concentration of resin. Cannabis plants are sensitive to sudden temperature changes, especially in the flowering stage. Extreme heat or cold can impact bud density and overall yields. In nature as a defense mechanism from cold, the plant sensing sudden dips in temperature will attempt to remove the pockets of air within the bud, it achieves this by compacting itself in doing so to better protect itself from cold snaps which are normally indicators in nature that worse weather is on the way. Terpene levels are the highest just before the sun comes out. Ideally, you want as many terpenes present in your plants as possible when you harvest. Cannabis plants soak up the sun during the day and produce resin and other goodies at night. The plant is at its emptiest from "harvest undesirables," so to speak,k right before the lights come on. Freshly cut buds are greener than dried buds because they still contain loads of chlorophyll. However, when rushed through the drying process, the buds dry but retain some chlorophyll, and when you smoke it, you will taste it. Chlorophyll-filled buds are smokable, but they aren’t clean. Slow drying gives the buds enough time and favorable conditions to lose the chlorophyll and sugars, giving you a smoother smoke. How the plant disposes of the chlorophyll and sugars by a process of chemically breaking them down and attaching the decomposed matter once small enough to water molecules, which then evaporate back into the ether. Time must be given to the process to break down the chlorophyll and sugars. Think of it like optimizing the environment for decay. Plant growth and geographic distribution (where the plant can grow) are greatly affected by the environment. If any environmental factor is less than ideal, it limits a plant's growth and/or distribution. For example, only plants adapted to limited amounts of water can live in deserts. Either directly or indirectly, most plant problems are caused by environmental stress. In some cases, poor environmental conditions (e.g., too little water) damage a plant directly. In other cases, environmental stress weakens a plant and makes it more susceptible to disease or insect attack. Environmental factors that affect plant growth include light, temperature, water, humidity, and nutrition. It's important to understand how these factors affect plant growth and development. With a basic understanding of these factors, you may be able to manipulate plants to meet your needs, whether for increased leaf, flower, or fruit production. By recognizing the roles of these factors, you'll also be better able to diagnose plant problems caused by environmental stress. Water and humidity *Most growing plants contain about 90 percent water. Water plays many roles in plants. It is:* A primary component in photosynthesis and respiration Responsible for turgor pressure in cells (Like the air in an inflated balloon, water is responsible for the fullness and firmness of plant tissue. Turgor is needed to maintain cell shape and ensure cell growth.) A solvent for minerals and carbohydrates moving through the plant Responsible for cooling leaves as it evaporates from leaf tissue during transpiration A regulator of stomatal opening and closing, thus controlling transpiration and, to some degree, photosynthesis The source of pressure to move roots through the soil The medium in which most biochemical reactions take place Relative humidity is the ratio of water vapor in the air to the amount of water the air could hold at the current temperature and pressure. Warm air can hold more water vapor than cold air. Relative humidity (RH) is expressed by the following equation: RH = water in air ÷ water air could hold (at constant temperature and pressure) The relative humidity is given as a percent. For example, if a pound of air at 75°F could hold 4 grams of water vapor, and there are only 3 grams of water in the air, then the relative humidity (RH) is: 3 ÷ 4 = 0.75 = 75% Water vapor moves from an area of high relative humidity to one of low relative humidity. The greater the difference in humidity, the faster water moves. This factor is important because the rate of water movement directly affects a plant's transpiration rate. The relative humidity in the air spaces between leaf cells approaches 100 percent. When a stoma opens, water vapor inside the leaf rushes out into the surrounding air (Figure 2), and a bubble of high humidity forms around the stoma. By saturating this small area of air, the bubble reduces the difference in relative humidity between the air spaces within the leaf and the air adjacent to the leaf. As a result, transpiration slows down. If the wind blows the humidity bubble away, however, transpiration increases. Thus, transpiration usually is at its peak on hot, dry, windy days. On the other hand, transpiration generally is quite slow when temperatures are cool, humidity is high, and there is no wind. Hot, dry conditions generally occur during the summer, which partially explains why plants wilt quickly in the summer. If a constant supply of water is not available to be absorbed by the roots and moved to the leaves, turgor pressure is lost and leaves go limp. Plant Nutrition Plant nutrition often is confused with fertilization. Plant nutrition refers to a plant's need for and use of basic chemical elements. Fertilization is the term used when these materials are added to the environment around a plant. A lot must happen before a chemical element in a fertilizer can be used by a plant. Plants need 17 elements for normal growth. Three of them--carbon, hydrogen, and oxygen--are found in air and water. The rest are found in the soil. Six soil elements are called macronutrients because they are used in relatively large amounts by plants. They are nitrogen, potassium, magnesium, calcium, phosphorus, and sulfur. Eight other soil elements are used in much smaller amounts and are called micronutrients or trace elements. They are iron, zinc, molybdenum, manganese, boron, copper, cobalt, and chlorine. They make up less than 1% of total but are none the less vital. Most of the nutrients a plant needs are dissolved in water and then absorbed by its roots. In fact, 98 percent are absorbed from the soil-water solution, and only about 2 percent are actually extracted from soil particles. Fertilizers Fertilizers are materials containing plant nutrients that are added to the environment around a plant. Generally, they are added to the water or soil, but some can be sprayed on leaves. This method is called foliar fertilization. It should be done carefully with a dilute solution because a high fertilizer concentration can injure leaf cells. The nutrient, however, does need to pass through the thin layer of wax (cutin) on the leaf surface. It is to be noted applying a immobile nutrient via foliar application it will remain immobile within the leaf it was absorbed through. Fertilizers are not plant food! Plants produce their own food from water, carbon dioxide, and solar energy through photosynthesis. This food (sugars and carbohydrates) is combined with plant nutrients to produce proteins, enzymes, vitamins, and other elements essential to growth. Nutrient absorption Anything that reduces or stops sugar production in leaves can lower nutrient absorption. Thus, if a plant is under stress because of low light or extreme temperatures, nutrient deficiency may develop. A plant's developmental stage or rate of growth also may affect the amount of nutrients absorbed. Many plants have a rest (dormant) period during part of the year. During this time, few nutrients are absorbed. Plants also may absorb different nutrients as flower buds begin to develop than they do during periods of rapid vegetative growth.

Start of week 4 Fed w nutrients 7/11/25

NEW BOX: 130x60x120 DIY: storage shelf, solid sheet metal ELECTRO ################################ thermometer top thermometer bottom hydrometer wlan ip cam (+ir filter) ---------------------------------------------------------------- input: x2 USB PC fan exhaust: x2 USB PC fan circulation: x2 USB fan ---------------------------------------------------------------- led panel 1: 300W ASUNDOM LED (Veg/Bloom/Full) led panel 2: 300W XHGrow Reflector-Series LED (Full) ---------------------------------------------------------------- studio light 1 (vegetation): 36W TaoTronics LED Gold studio light 1 (vegetation): 50W Balai LED full studio light 2 (vegetation): 8W VINGO LED blue ligh studio light 2 (vegetation): 50W Balai LED full ---------------------------------------------------------------- studio light 1 (bloom): 36W TaoTronics LED Green studio light 1 (bloom): 36W TaoTronics LED Gold studio light 1 (bloom): 50W JADIDIS LED IR full studio light 2 (bloom): 36W TaoTronics LED Green studio light 2 (bloom): 36W TaoTronics LED Green studio light 2 (bloom): 36W KINGBO LED Deep red 660nm 3x PLANTS ############################### FastBuds Girl Scout Cookies pots: 14L soil: plagron grow mix