Die Pflanze ist nicht weiter in die Höhe gewachsen und bleibt bei einer Gesamthöhe von 65 cm. Ab jetzt liegt der Fokus vollständig auf der Blütenentwicklung. Genau das war im Verlauf der Woche deutlich zu beobachten. Die Abstände zwischen den einzelnen Blüten an den Hauptrieben haben sich deutlich verkürzt. Die Blüten schwellen sichtbar an, und erste Trichome sind klar zu erkennen. Auch der Geruch wird deutlich intensiver. Am ehesten erinnert er mich an überreifes Obst, ohne dass ich eine konkrete Obstsorte benennen könnte. Er wirkt fruchtig-süß mit einer säuerlichen Note und einem leichten, etwas derben Skunk-Unterton. In dieser Ausprägung ist das Aroma auf jeden Fall interessant. Die LED habe ich auf 50 % gestellt; das entspricht etwa 750 PPFD und einem DLI von 33. Eventuell erhöhe ich die Leistung im Laufe der nächsten Woche weiter, um auf 800 bis 1000 PPFD zu kommen. Die Luft war diese Woche sehr trocken, wodurch der VPD deutlich gestiegen ist. Den Luftbefeuchter werde ich trotzdem nicht wieder in Betrieb nehmen. Die Parameter in Woche 10: Controller Einstellung Tag: Temperatur und Luftfeuchtigkeit 24C°-26C°, 45% - 55% Controller Einstellung Nacht: Temperatur und Luftfeuchtigkeit 24C°-26C°, 45% - 55% Durchschnittliche Tagestemperatur: 28,1C° Durchschnittliche Nachttemperatur: 24,3C° Durchschnittliche Luftfeuchtigkeit Tag: 43,7% Durchschnittliche Luftfeuchtigkeit Nacht: 48,3% Durchschnittlicher VPD Tag: 1,7 Durchschnittlicher VPD Nacht: 1,2 Durchschnittliche Bodenfeuchtigkeit in Mbar: 85 LED Leistung: 50% = 150 Watt Beleuchtungsdauer: 12 Stunden Umluft: Stufe 2 oszillierend

Day 37 - Everything looks good.... they are drinking so much.... i built a bit more stable light setup, and i'll need to buy afew more plugs and stuff, to fill it out ...... i organised all the 2700k globes, ready to swap in..... still waiting on the exhaust fan, so i'll keep em in "grow" mode another week or 2 .... i'm vaping a leaf or 2, and drinking "green tea hot chocolates" .... it is so delicious in hot chocolate .... my health has picked up since starting the vape/drinks... the 21 thc/19 cbd is supa healthy ... Day 38 - Getting them ready for Flower, noticed they are lacking in nutrients, so i started em on the heavier dutch master gold flower nutrients. Day 40 - Added some pics. (they look droopy because they in night mode, just turned on lights for pic) - Started them on 12/12 flower, still working on getting all the lights, gear, and globes, for the right spectrum and amount of light.... atm got - 7x 2700k (click) , 2x 6400k (osram), + 60w light panel .... i'll go get some more gear today and hope to expand it to 10x 2700k , 2x 6400k ...... I put the exhaust filter fan on seperate power, so it doesn't go on/off with the timer, but stays on all the time.... it totally fixed up any odour problems, haha ....... Added some different pics for my light spectrum ... etc..... the outside winter temp is now at 40-60oF (5-15oC) so with the 12/12h, the temp inside the tent is dropping to 60-80oF (18-22oC), abit low, but flowering is supposed to be in winter, so idk, see how it goes..... I'm new to growing, so idk how this will work out....... just working it as i go.... i noticed afew spots on a leaf, so i upped the neuts abit more, they are still drinking like fish, huge amounts.... Day 40 late - new vids - Got the extra gear and installed it all... redesigned the initial setup, refined it with proper measurements, had to get my steel rule out, lol....... got the 12 leds in and running, 10x 2700k clicks, and 2x 6400k osrams, with the panel..... it's lookin beautiful and got the exhaust on 24 hrs now, all working perfect with 12/12 timer.... they are forming a few spots on leaves, so hammering the nute water into them now... they are drinkin 1-2 litre of nute water a day each.... (nute water = Dutch mater gold one grow/flower, 800-1000 ppm 6 PH) 😎 Some details about lights.... i did some maths on it, and included some handy pics..... because i'm using cheap leds, i'm keeping the distance at 25cm, they are leds so they won't burn, and it massively increases the lumens/lux/Par, and with my home built light setup, the leds are spread out enough to keep it lower.... worked out good..... something of note is that all the led globes are built/made in china... however different marketing/selling companies from around the world... and the german osrams are 1w leds ... by far the most superior, but anyone can design and send the requirements to china to build em, haha) it's not a contest, we all work together.... haha.... the person with the best led light globes gets my business, because i want the best for my babies.... :) (let me explain- 1w led vs 0.5 w led, the watt of the led projects the light, lumens, LX/PAR etc much further the higher the watt of the led....my 600w panel has 0.5w leds, the philips has 0.75, the osrams have 1w leds..... ) each globe philips (dutch)- 10.5w internal - 14 leds 0.75w 1055 lumens each globe osram (german)- 10.5w internal - 10 leds 1w 1080 lumens each globe click (cheap)- 9w internal - 16 leds 0.56w 800 lumens light panel - 70w - 600w 30 red - 8 red 12 blue - 8 white 7500k 1 ir - 1 uv = 20x blue 6400k - 38x red 2700k internal - 60 double leds - 120x0.5w 6000 lm

Looks like I have to dial back the nutes a bit. I'm going to give them a day or two cuz I let the reservoir get pretty low and I think that's what caused that one plant to get burnt. Once again thanks for stopping in! ✌️👊

18.6.2k24 ✅💚 23.6. - Low stress for a stronger peak

Hard to grow in my case, but the results are worth it. Nice trichome production, on the buds as well as on the sugar leaves. I didn't expect much quality with all the problem she had but she turned out beautifully. 227g total from 1 plant tested at 24% THC and <2% CBD 3.02g of kief from the trim

Foto 1 dia de germinación 05/06 Foto 2 dia 16 trasplante a maceta definitiva 21/06 Foto 3 1 semana después del trasplante empiezan a crecer . A la glowstarz le hemos echado living rizos de terranabis un nuevo producto para enriquecer el sustrato y a las raices

All ladies looking amazing. Sundae Batter looks to have very good resilience towards stress. Bubble a bit problematic and hangry.

This weekd most some more orange appears on the buds as they get ready for harvest. Im going to start flushing them next week for 1 week before I harvest. They seem to have about 30 or 40% orange hairs on the buds so i hope i time it good. I will update next week. Peace

90x60x140 (Mars Hydro) FC-E4800 (Mars Hydro) Easy2go Aquavalve5 (Autopot) Living Soil (Demetearth) Bruce Banner (PEV Seed) Gorilla GG4 (Ganja Farmer) Cream Caramel (Sweet Seed) Gorilla Gelato (Ganja Farmer) Blueberry (00 Seed) Kalini Asia (Zamnezia) Biscotti Mintz (Barney's Farm) Blackberry Cake (Sensi Seed) Amsterdam Amnesia (Dutch Passion) Gelato Cookie (Ganja Farmer) Purple OG Punch (Ganja Farmer) Sweet ZZ (RQS) Rainbow Road (Paradise Seed) Substrat ~50L: 30L Super Light Mix Biotechnologie 18L coco 2L perlite 1,7kg lombricompost 350g guano de chauve-souris 350g Zéolithe 350g Basalte 170g guano vers de farine 170g biochar 0,7g Endomychorise glomus intraradices 0,7g Bacillus Amyloliquefaciens Paillage de luzerne alfalfa Arrosage avec 2ml/L de mélasse de canne 1x par semaine Pulvérisation avec 1% d’huile de neem

This little girl started her journey on April 4th with germination into a water glass and finished up on June 27/20 – Day 78 from germination. She was a fun grow and was very resilient through the whole run. She spent most of her grow time in a 20/4 light schedule. She formed nice frost levels and stayed to a very nice and manageable height of roughly 20” tall without topping or bending her main stem. She was not as fussy about nutrient levels and took them well. She does like her medium on the dryer side though. Small little auto bush of OG Kush crossed with Indica genes😃 She would make a nice a plant to run while you are vegging out some photos for 6 or 8 weeks as she is not very big in size but will swell up and yield decent weight👍 She was grown in a 3 gallon fabric pot with coco coir and maybe 15% perlite. She was fed salt based nutrients……..so sorry but they are flushed out and that is what I am more comfortable with. Focus on the early growth with microbes, fungi and kelp!! She was fed the normal pattern with pH being held around the 5.4 to 5.8 range in feeding. Then as flower approached, I gave the pots a more consistent look at the runoff numbers and she was running 7.8pH coming out of her!!!!! WTF. She stayed in her pot that she was planted in and fought this issue all through the rest of her grow. The pH issues started surfacing around week 3….as we headed into flower of course. Scratching my head for weeks, I ultimately didn’t change anything other than really low pH feeding going in…….below 4 idea. For weeks she had 3.9 water going in and still getting 7.8 running off. I initially felt it was related to cheap fabric bags so I cut slits in the very bottom of the bags that stayed and tried transplanting other girls into plastic pots, which it can be fabric pot issues but I am not as convinced anymore for this run that there was an issue there, wasn’t sure about giving her Magnesium on top of Magnesium and therefore did I mess her up good on the inside early on in week 2 idea, out of options I changed back to RO water and that seems to have solved my issues……I was using tap water that was not filtered this run🤬 The pH was high so that was adjusted but with the ppm being at 185 to 200 range I chose not to buy a filter and just dechlorinated the water only. I was tired of lugging 5 gallon water bottles in and out of the basement😃 That is a difference from all other grows…..silly for not catching this by week 4! So…….back to lugging bottles in and out of the basement😂😂😂 She really started to take shape around weeks 7 and 8 and formed a beautiful little cannabis plant and grew to 20” tall and roughly 18” wide. Main focus with her was to just perform LST on side branches and let the top go…….I wanted to just let her go and see what would happen to her main cola for size and height……plus I don’t do that…….I always bend over the tops on my grows so this was a little different for myself. She grew very nice leaves and a lot of them. This pheno had a lot of leaves to her and that is fine……its not really my first choice in characteristics of a plant though..…..so much more work at trim time……Green Poison XL Auto, SWS71, was a dream to trim👍 as a comparison!! She didn’t fox tail very much she firmed up her buds towards the end. The resin production was a little slower coming out in her but by week 7/8 she was getting pretty impressive😋😋😋 White and sticky!! She smelt of woods with citrus notes…..works for me👌 There were no issues at all retaliated to pests or bugs……I threw in a couple sticky traps but there weren’t any to catch. She handled the high humidity in this run great and there were no signs of any powdery mildew👍👍👍 She is a very stable strain from Sweet Seeds! Day 63 was last feeding, flushed for almost two weeks. Rezin and Liquid Weight still given for one of the weeks but the last week was plane water. In hind-site I think I should have hit her with some Flawless Finish to help get that last bit out of her. She did feed on most of her nutrients but some of the lower leaves were still more green that I would have liked. She was cut down on day 77…..11 weeks is about what I suspect looking at her in week 7…….this was roughly 8 weeks flower time……makes sense😃 She grew for 75 days and then I decided what the heck…….she needs a hole in her stem to stress her out😃 I didn’t try breaking a branch but rather drilled a hold into the base of her stem……something new to try out. I think I will try more holes next time….max 3 I think……then I want to run a couple with cracking their stems and see if there is a difference👍 I feel more in control of a drill and its accuracy vs bending branches and they snap where they want to…….anyway it was worth a try!!!! Worst case, it made it easy to hang her as a whole plant to dry😃 This girl battled pH issues all her life and as a result the buds were not where I would have liked them. There were not fluffy…..but here were not as hard as I would like for rolling joints, so the whole girl went to concentrates She dried for 7 day as a whole plant, 2 days more in smaller branches, then 1 day curing in jars before dry ice sift. She yielded 74g of dry cured buds, 2.65 ounces. Not bad…..I don’t think her buds would have gotten a lot bigger but they certainly would have had more weight if they firmed up…..grower issue, not genetics. So…..lets make some rosin from this girl🤩 The yields on this and making her hash a perfect colour are not what this process is about…..let’s get that out of the way right away……this is about another way to enjoy and consume my cannabis for my own relaxation and medicinal needs. Taking pictures of rosin is always a challenge…..it is always dark in the pictures unless you are using a nice DSLR to let more light in. Rather than making bubble hash with water, I just used the bags to make a dry ice kief from the buds. Unfortunately I couldn’t get a block of dry ice and had to use these cubes…….don’t like these as much because there are too many surfaces beating your green plant material and your kief goes green before long when shaking. Could have done it with out ice all together…..nicer hash but lots left on the plant afterwards that way so yield is low. Used two bags in this extraction, the 220 as the bag for edibles and the 120 as the bag for pressing rosin to smoke…..dry ice hash rosin!! The yield on this from the 74g of bud was 22.4g kief. 220 bag was 12.6g and the 120 bag was 9.8g. Not great I guess but I didn’t want to keep going for 4 and 5 minutes with the bags…..these were roughly 2 minutes with the 220 being 3 minutes on the high side. You can certainly see that the 120 product is more golden in colour than the 220 but since I didn’t crazy, the 220 is still a very nice colour. Last step on this journey was then to take the kief and make our rosin. I pressed product using 37um bags with the temp set at 160 degrees. All were done the same for the most part……roughly 4 gram presses, the same temperature, and the time. The first presses were 90 to 120 seconds. If a second press was done on the pouch, then it was at the same temp but for only 40 to 50 seconds. The yield on this was just shy of 7 grams…….6.77g…..roughly 30% yield from Kief???,…..roughly 9.2% from flower???…….would have likely done better right from flower😂 😂 😂 it was fun, regardless of the yield😃 Tasty rosin!!!! Can’t beat rosin for getting the true tastes of the plants. These numbers are absolutely due to my abilities with extraction.......sure don’t judge the genetics based on my returns......she is a frosty plant and will give great returns!!!👍👍 Several pictures show that, I hope!! So that will wrap up this diary for Sweet Seeds Killer Kush Auto, SWS56. Certainly give this girl some consideration if you like OG Kush and also have space concerns in your grow. She is beautiful frosty little girl with a punch. Certainly get the usual woody and citrus notes from her rosin and she has a lasting high. She helps to get get you going and willing to finally start cleaning that corner of the room you have been avoiding…….watch out though…..distractions😃……next thing you know 40 minutes go by and you are staring at a box of DVD’s wondering what happened to CD’s…….cassette tapes (the art of the “mix tape”), 8 tracks, vinyl……ALBUM COVER ART Baby!!!!!! Then its either back for another rip, or get your crap done because the next rip leads into even less work getting done😃😃 Great job as usual @Sweet_Seeds !!! Looking forward to the next one……Cream 47 photoperiod……actually, already done germination and a new diary coming👍👍…..compare a 3 gal pot to a 5 gal pot, or a fabric vs air pot, and see what my yield differences are?? Thanks for the read and greatly appreciate the comments Growmies!!!!! Love spending time on a forum for growers to help fellow growers. Much grower love and thanks again for your time, opinions, and suggestions🙏🙏🙏 Cheers!!

🌸 Week 3 Flower — Bud stacking begins! 🌸 This week was a turning point — stretch finally slowed down and the plants are now fully focusing on bud formation. The tent started getting really humid due to the extra leaf mass and transpiration 🌿💦. That’s when I realized: a dehumidifier is a must. Without it, RH would climb over 70%, which is dangerous at this stage. Temperatures are still steady (27°C day / 20°C night), but now I’m working on dropping humidity to ~55–60% for safer flowering. Nutrient-wise, I reduced nitrogen even more, focusing on PK boosters and bloom nutrients. Bud sites are stacking nicely, pistils are shooting everywhere 🧡, and the first serious trichome production has started ✨. Mistakes from earlier (too much IR, uneven light distribution) are still visible on some plants, but overall the crop is healthy and vigorous. Next week should be the start of real frost explosion ❄️.

Update July 15th I was wrong about the smell. It’s actually very diesel like and I’m excited about the result. Bud swell still massively going on. But also the first leaves are becoming colorful so it’s fall time. 🔜 it’ll be ready. Update July 12th Approaching the finish line. Bud swell has started on all sites. Samy is pushing pistils and calyxes everywhere. Some of them calyxes are extraordinarily fat. What’s also interesting is the thick sugar coating. Trichomes look like super big. Seems to be an interesting strain also for bubble hash. Smell is also kicking in. Not yet the diesel intensity I’m expecting but what am I expecting anyway 😝….

Always R.O Water Watering the plant 3 times for per week 1st Watering with nutriens. (750 ppm) (06.03.2023) 4 liter 2st Watering with nutriens. (750 ppm) (08.03.2023) 4 liter 3st Watering with only R.O water & CalMag. (300 ppm) (10.03.2023) 4 liter this time is preflowering. -Day48 Finally I did some lollipopping and LST. I reduced the ones that can't go up from the below a little bit. And I did empty watering R.O water and CaMg+ Total 300 ppm pH 6.2. Light 700 PPFD. it will be in full bloom next week💪

🌿 Update nach 6 Tagen! 🌿 Die Pflanzen machen sich wie immer richtig prächtig 💪 Heute gab’s wieder angepasstes Wasser 2,5 L pro Pflanze mit einem pH-Wert von 6,5. Gedüngt wurde diesmal mit dem kompletten Sortiment von Bio-Bits, nach dem Blütewoche 2 Schema. Ab morgen startet Blütewoche 3 wir haben also fast schon Halbzeit, Wahnsinn wie schnell das geht! 😍 Nächste Woche steht dann wieder Top-Dressing mit @panova25.de an. Die Ladies, die ihr hier seht, stammen natürlich wie immer von meinem zuverlässigen Partner @ganjafarmer.seed 🌱 Bis dahin Leute lasst gern ein ❤️ und ein Follow da! Euer Krauti ✌️

Semana 2: Creo que una de las mejores decisiones fue meter poda de puntas a tiempo. Si las hubiera dejado crecer, a estas alturas ya estarían demasiado cerca del foco, con riesgo de estrés o problemas en una floración más avanzada. Claramente no voy a sacar colas gigantes o “colas de zorro”, pero sí voy a bastante cosecha gracias al buen espacio que hay en interior

Week 3/ day 21 big strip, unfortunately I did not have enough time to complete so i will going going back in to continue tomorrow. Somthing mess up with Journal week date.. THIS IS WEEK 3 of flower Intake Run off PH 5.8 5.9 EC 1.8 1.8

For this grow I've used, For the growth 1 sf1000 2 fan 15w 1 extractor 150mm 350m3/h 1 carbon filter 150mm 1 Hydro Shoot 60x60x140 1 timer 1 thermostat Heating system for the winter month To start pot 2l, after 8l 18 Hours On, 6 hours off light For the soil I've used plagron light mix and rqs pellets. For the blooming 2 sf1000 2 fan 15w Extractor + Filter 150mm 1 Lite 60 box 2 timers 4 RQS Fabric Pot 15l 12/12 Plagron batmix + RQS Pellet After harvest, I'll not use my usual carton dry, last time I've got mold on few big buds, si this time I've put the stuff in a room with 15w fan (see video), Thanks for all my friends! And again thanks to RQS and @James