Check the winners The Grow Awards 2026 🏆
Likes
Comments
Share
Hy Growmies, The stretch is over, so I switched to CANNA Aqua Flores. Almost screwed up since I Had a light leak through some Styropor and had some white slime on the roots under the leak. Removed the water and sprayed them directly with some 3% hydrogen peroxide. Worked great now we are on track again.
Processing
Likes
36
Share
Hey everyone 🤗. A lot has happened this week ☺️. Not surprised that the plants look so extremely dark, is that because I sprayed them with neem oil as a preventive measure , because I discovered a very young trip on a plant. This annoys me extremely, because the attachment room is very clean and neither shoes nor dirty clothes come in when you enter the room 😩. But since I had the problem in most cases years ago, I am very confident that I will get the problem under control very quickly 😃. Otherwise, everything is developing very well as usual 👌. I wish you a lot of fun with the new update, stay healthy 🙏🏻 and let it grow 😃. You can buy this Strain at : https://sweetseeds.es/de/sweet-skunk-f1-fast-version/ Type: Sweet Skunk F1 Fast Version ☝️🏼 Genetics: Sweet Skunk Auto (SWS34) X Early Skunk 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .
Likes
17
Share
@Chucky324
Follow
Hello. This is the end of week 2 and the beginning of week 3 of flowering. These girls sure stretched this week. Wow. I see 1 top about 10 inches from the top of the tent. That one branch might get super cropped if it keeps going up. Near the end of this week I want to get in here and do a final trim/prune. Paying attention to fan leaves that don't get enough light on the bottom and fan leaves that block light on the top. If you have a big plant try to leave 4 to 8 fanleaves at the end of each branch, with 8 on the lower branches and 4 on the smaller upper branches. I will also have a good look at the small branches to see if they are sucker branches or if they will put out a small bud. I know that I will put the plant into shock for a few days with the trim/pruning, but when the plant heals and starts to grow again it will go right into resin production, full speed. I will, generally not touch the plants till the end after that. I might take a few fanleaves off that block the light and I'll take off any yellow or dyeing leaves from the bottom too. Came into the tent a couple of days ago to water the plants and saw that the fan blade had disintegrated in it's cage, but it spewed out small bits of plastic all over the plants closest to them. About 5 weeks ago my other fan stopped working in the same place. Not enough lube I'm guessing. so I went and got that blade and it fit. So I didn't have to buy a new fan. 😃 I've got to get in here and vacuum that up before the resin starts flowing. Don't need small bits of plastic in my resin. 😝 See which fan blow up in the video. Oh yes, I also had to replace a automatic opening roof vent this week. It hardly opened a inch on a hot day. I bought one off Amazon, it was here in 3 days, and it works great. Ok. See ya next week. Be Cool! Chuck.
Likes
4
Share
Poderia ter saído melhor mais foi muito boa a experiência !! Valeu✌️🏼👽600
Likes
17
Share
Hi 420 Family. Start of week 6, and we are well into the blooming stage. So far so good, these ladies have gained a lot of growth over the past 2 weeks, they have stretched a lot and have now shifted their energy into making buds. The one WW is a little ahead of the rest in maturity it seems, the other two WW's not far behind. PL's I think will flower for an extra week or two looking at the bud sites and the pistils. At this stage they are getting about 1L of bloom feed every 1.5 days but it does seem to pick up and they are getting more thirsty every watering. I guess they will eventually settle on about 1L per day. D36 - 11 Aug - All good and no complaints, other than the stretchy PL's. Let's hope they just make for awesome bud sites. D38 - 13 Aug - Steady as it goes... Bud sites are forming nicely and I have not again spotted any sacks on the WW that initial had about 6/8 sacks on the oldest branches, nodes closest to the main stem. Very happy that I didn't kill her; I am still keeping a close eye tho. The PL's have again stretched a little bit but not as much as last week, thank goodness. They were watered yesterday morning and will be letting them dry out properly before giving them another feeding. D38 Heights: WW1 - 46CM WW2 - 45CM WW3 - 62CM PL1 - 65CM PL2 - 72CM PL3 - 76CM Stay blessed and I wish you all a happy grow!
Likes
3
Share
Likes
57
Share
@ATLien415
Follow
🙏 Big thanks to Plagron and Zamnesia for putting on the Eternity Grow Cup 2025. This kind of platform means a lot to the community. The chance to push our grows, test out new techniques, and connect with other cultivators from all over has been inspiring. Appreciate the love and effort that went into making this event happen! Hope everyone enjoyed looking over my shoulder on this grow and best of luck to all participants! REVIEW - Runtz (fem., photo.) from Zamnesia: ⬛⬛⬛⬛⬛⬛⬛⬛⬜⬜ The seeds from Zamnesia germinated rapidly, rooted strongly, went wild in veg, and produced an ample amount of high-quality medicinal flower. The diary speaks for itself on that front so this space will be more of a phenotype review. The plants were labelled A, B, and C from left to right respectively in photos. A and B were the 'clasicaly-appearing' sativa-esque leaves while C was the more 'indica-appearing' phenotype. Although A and B appear the same qualitatively, they did produce substantially different amounts of flower (despite their DLI being near max out for the entire tent footprint without supplementing CO2, so I do not think just being in the middle attributed to this). Past their different yields, A and B also have vastly different profiles. A is a classic gelato/ice cream cooler/Z terps, and my personal favorite of the plants (wish I had taken a clone of this one instead). B is the most on point for what I think of with Runtz, classic Z terps but with a slight tropical/rotten/sweetness to it. C had the misfortune of being ready to chop a little earlier than the other girls so her profile is mostly just spicey kush now. I did observe intersex flower sites but given the entire context of the diary and how the plants performed, I have to assume it was user error. No pollination observed in any of the flowers, as zero additional intersex sites occurred. The distinction between A, B and C is what I would expect from a typical F1 cannabis seed. I do not enjoy growing from seed much but these girls were manageable. Add to that the relative stability of the genetics for a Runtz recreation, and well, these are good quality beans for a great price. Not only is Zamnesia responsive and available, their confidence speaks volumes. How many vendors would have an in-house Runtz, knowing how much of a genetic-gravity-well it is in, and be confident enough to let ~200 randos grow it and show it? REVIEW - Green Sensation from Plagron: ⬛⬛⬛⬛⬛⬛⬛⬛⬜⬜ I enjoyed using the green sensation, the NPK values on it make it versatile in application and a power-house in flower. I can't say I noticed anything better or dramatically improved, although comparing to Heavy 16 and asking for a marked improvement is big ask in my opinion. What I was able to do was seamlessly integrate the Green Sensation into my current routine. The additive stayed homogenous, was easily introduced into solutions with no adverse impact to the water contents or pH. Most importantly, the plants enjoyed the additive and it did accomplish the main goal of being able to wane off your primary line. In this respect, by using Green Sensation I was able to save resources by lowering my Heavy 16 inputs across the board approximately 50% and supplementing with Plagron's Green Sensation.
Likes
25
Share
The clone of Ayahuasca Purple have a gap of growing very impressive !! I’m working on it to do my first Main lining for now the results are great her reaction to low stress training and topping are beautifull ! she never stop to grow i love this plant
Likes
7
Share
@Adam22
Follow
Picked up some rhizotonic and had the fan on the past few days and all is looking well! They have been rotated as they started leaning towards the light and bending in one direction..My last veg light was 200/250w blue CFL however didn't notice at the shop I got a 125w I will pick up a bigger veg light for a slightly higher warmth and a bit more light coverage. Using the canna Coco range nothing else.
Likes
13
Share
Last week of flowering (72days from the light switch) Gonna cut soon when the dirt is dry. A quite late harvest. Many buds denser more, and stem can’t longer resist. This season so satisfy. Thank for all mentor and comment. You all are my inspiration for grows. Feeding 23/1 Water 13.5L+Flawless 20ml ppm80 ph6.2 MDR 3L 2Lx5 Runoff MDR 1400 /1155 Zkittle 1600/1300/1150 Pineapp 900/600 Purp 1300 /1200 Sapp 2000/1100 Dozdos 1100/1000 25/1 10.42 6L ppm9 ph6 1L per pot 3L+Flawless6ml ppm116 ph5.9 1.5/1.5 Purp, Zkittle 4.5L+ Flawless7ml ppm119 ph6 1.5/3 Sapp,MDR Runoff Purp 1300 Zkittle 1500/1200 Dozdos 1400 Sapp1300 Pineapp850 MDR950 27/1 runoff Pineapp 500 Purp 900 MDR 600 Zkittle 400 Sapp 300 Dozdos 400
Likes
20
Share
@MMSC16
Follow
Day 84 - June 25 June 25 - 09.30AM Trichomes still not ready at 50/50 milky to cloudy. Soil is still moist. Will water either late this evening or tomorrow morning. I suspect this will be the second or last watering before chop. June 25 - 09.00PM Removed a dead leaf - I want to remove some of the dying leaves on the colas, as underside of plant has a beautiful purple hue to the leaves. June 26 - 08.45AM Trichomes are starting to turn milky, with 60/40 milky to cloudy ratio. Will water this evening as pot is getting lighter + soil isn't as moist. June 26 - 01.20PM Purple is here. I think it's time to chop tomorrow as I'm seeing more ambers. I'm noticing some bright green growth which I hope isn't the start of nanners. June 26 - 01.20PM Watered 3L. Chop tomorrow. June 27 - 00.00AM CHOPPED (Day 86). . June 27 - 00.00AM Inspected detached calyx with strange (I suspect pistil) growth. Many amber trichomes found. Strange, given colas I inspected were all cloudy with no amber, but this calyx (located at centre of plant) had plenty of amber trichomes. Perhaps this is due to recieving a higher than expected DLI at hotspot of light. . June 27 - 00.00AM Underside of Buds are underdeveloped in comparison - easily due to light blockage. I aimed not to defoliate as she entered flower, but perhaps with better LST and leaf tucking I could've produced more even yield. . June 27 - 00.00AM Trimmed Fan leaves and mostly necrotic foliage - want to avoid bud-rot at all costs, but I may have over-defoliated. . June 27 - 00.00AM Drying hanging upside down with oscilating fan above (2/10) and one beneath driving air toward a wall of the tent. There's also an extraction fan at the top of the tent. . June 27 - 00.00AM Humidity 60-62% & Temperature 64-66F. . June 27 - 02.45PM Temperature is rising in the tent to 69F, inside a sealed bathroom room. Sealed Bathroom offers no light leakage, but I might need to open the door and allow light + cool air in. . June 27 - 03.45PM Moved tent out of bathroom to get cooler air. Tent temperature was just under 70F. I've likely lost some flavour over a few hours - but now that it's in a cooler environment (with slight light leakage) - things should improve. . June 27 - 03.45PM Temperature & Humidity are 66F and 60% respectively. . June 27 - 04.00PM (16 hours since chop) . June 27 - 04.05PM Added portable cooling unit to intake, this should drop temperature by a degree or two hopefully. Ensured Fans weren't directly in path of buds. . June 27 - 04.30PM Humidity is 66%, I've increased oscilating fan speed to 5/10 to combat this. . June 27 - 08.50PM Humidity is 60%. Temperature is 66F . July 1 - 09.00PM Branches still bend - not snap. Will trim and start cure process tomorrow. Leaves shrivelled up. . July 2 - 10.00AM Rough Trim, and placed into cure jars. 58% RH and 60% RH Probably should have harvested last night. Will maintain RH in jars via burping. Roughly 2oz (56g) of bud harvested.
Likes
15
Share
@Chubbs
Follow
Week 6 update: What up Grow family. These testers are growing fast and strong. Where in week 6 now and the swelling and ripening of flowers are going amazing. Still feeding 500ml/16oz daily as I've found that's the sweet spot for 3gal fabric pots for these. I'd say these probably have about 2 weeks left until they'll be finished. All in all Happy Growing.
Likes
13
Share
@Dunk_Junk
Follow
Looks like she's getting close! Buds are nicely plump and dense! Plenty of cloudy trichomes. I'm looking for the first amber trichome to harvest. I want this to be uplifting not couch lock.
Likes
1
Share
Likes
25
Share
@Brebzzz
Follow
They out on 07/11 morning I dont know if i gave her enough water
Likes
4
Share
@pzwags420
Follow
gsc is about a week away from harvest blueberry will be shortly after and og kush plus blueberry muffin are a little longer still, they were slow to start flowering.
Likes
2
Share
@TTerpz
Follow
Fed with nutrients on 4/16/25 Watered with 6.8 ph plain water on 4/18/25 Day 5: fade began 4/20/25: fed with nutri
Likes
20
Share
@usere
Follow
defoliation all fan leaves that cover other top sites and improve airflow and light penetration one each other. I will remove more leaves during week 5. watering schedule is the same, one times i watered with molasses about 2ml/l.