Likes
Comments
Share
@PapaTerps
Follow
Zkittlez - Growers Choice Day 66 - watered with 2L of RO tap water with defined above nutrients, mixed in order and pH'd to 6.3. She has finished her stretch and has developed her flower and is now focusing on bulking! That Zkittlez aroma has started to fill the tent and it's getting me so excited for her! Not much work on her this week, just a few fan leaves removed to improve light penetration and that's pretty much it, she has been super easy!!
Likes
7
Share
Week 2 begins, not much to report other than the pro-mix HP hasn't dried out enough to warrant another feeding.
Likes
9
Share
Last week of flowering, since couple of days we are only giving water but the last shot of ultra PK did some great work here, she swollen up and got really fat the last weeks. wonderful strain, really generous and easy to grow, vigorous and a really nice old school smell with a sweet mango like touch!
Likes
6
Share
Overall it was a great first time grow. The outcome was smaller than expected. This was caused by the heavy under watering, that stunted the growth of the plant. However the 26g of weed that I got from this harvest is amazing! Smoking is very smooth and the sativa effects are great.
Processing
Likes
25
Share
Hey hey hey Growmies 😘🤗🤩 Thanks for stopping in! I hope your week has rocked! 💪🏼So far so good over here! Today is day 49 for my set of G14s from 420Fastbuds and they are kickin ass! 🤩 The first plant was topped early on at 3 nodes and we also did some LST, we now have 4 beautiful main colas that are getting so thick!! This girl is smelling so so good and is really doing great! 💪🏼 The second plant pictured is the same age and was not topped. This girl we did LST early on and it is also doing very well and has a good smell! Both girls are receiving a few different types of bloom nutes and also cal mag. We did some more defoliation on day 47 so the bud sites are sure to get plenty of light! We’ve been using the spider lights and so far are very happy with them. 3 gallon pots that are super breathable. Like I said, so far so good 😊 We are leaving to FL soon for 10 days 😬 so hoping everything goes smoothly while we are gone. Any tips for that (leaving plants while on vacation) are welcome! Thanks for following along or stopping by! I’m here to learn and here to help if possible 😊 Check me out on Instagram @greengirl420mipotfarm or my Husbands at mi.pot.farm to see more of our grows 🤗🙃 And don’t forget.... puff, puff, passssss 💨 💨
Likes
9
Share
Very few hours of sun because that period rain all days and i had to out them in a room with artificial light from an ordinary bulb that didnt make them grow obviusly but avoided fading. The little one is still in difficult situation it wasnt growing.
Likes
29
Share
👋Top is a clean cut, no confusion for the plant, road ahead is clear, by completely removing the main growth tip, the auxin source is eliminated. The plant permanently halts vertical growth from that main stem and immediately sends its energy and hormones to the two new, evenly spaced branches just below the cut. Fimming slightly different because a small tuft of the top growth is left behind, the auxin disruption is temporary and less severe. The plant recovers more quickly and sends its energy to multiple surrounding growth points, often creating four or more new shoots from the same spot. It will eventually regain some vertical dominance after a few weeks if left to its own devices, but with a little more LST, bending the apex to the same height as the rest of the internodes, this shatters dominance, hopefully creating around 8-9 main shoots growing at equal height once recovered and grown out. Reduced environmental intensity for now and let her focus on dealing with this new stress for a week or two. When H+ ions are added to soil, the first nutrient displaced from exchange sites is typically aluminum (Al3+), if it's present, followed by calcium (Ca2+), magnesium (Mg2+), and potassium (K+), because aluminum and these base cations have different binding strengths. The order of displacement depends on the lyotropic series, where ions with a higher positive charge and those with weaker binding strengths are displaced first. The specific order of nutrient displacement is determined by the lyotropic series, which ranks the strength with which cations are adsorbed by soil particles: Al3+: Most strongly adsorbed, so if present, it will be displaced by H+ ions, leading to increased solubility of aluminum and potential plant toxicity. Ca2+: Displaced next, as it is more strongly bound than Mg2+ or K+ but less than Al3+. Mg2+ and K+: Displaced after Ca2+. The displaced nutrients can be lost from the root zone through leaching, becoming unavailable to plants. As H+ ions increase, the proportion of acid cations (H+ and Al3+) on the exchange sites increases, while base cations (Ca2+, Mg2+, K+) decrease, resulting in a lower soil pH. The amount of photosynthesis (water splitting) directly determines the availability of H+ ions (protons) in a plant. 90% of water is for cooling of photosynthetic apparatus the other 10% is split for its H+ among others things. Carbon sugars, like glucose, do oxidize in soil through a process primarily driven by microorganisms, which break down these sugars for energy. This oxidation converts the sugars into carbon dioxide (CO2) through cellular respiration, a key part of the soil carbon cycle, though some carbon may also be incorporated into soil organic matter. The rate and extent of sugar oxidation depend on factors like oxygen availability, the presence of Fe oxides, and soil redox conditions, which can all influence the process. My understanding of why we flush. Just plain water, what does it do? Strips the medium of salts and nutrients making it empty. What does that do? Triggers nutrient recycling within the plant. What's nutrient recycling? It is a natural part of plant senescence, which can be triggered once you know the switches. A 24:1 carbon-to-nitrogen ratio will also trigger. Why won't it trigger autophagy for me? Nitrogen needs to be gone, gone, gone almost. Ammoniacal (organic) nitrogen takes 4-5 times more water to separate it from soil particles than nitrates so what happens is most people jist flush the nitrates, leave all the ammoniacal in there and this prevents autophagy initiating. Nitrogen decays differently depending on its form during the dry. Ammoniacal nitrogen will oxidize in the air, leaving no trace. But nitrates do no decay and turn volatile and smelly and remain trapped until smoked, no matter how long you cure it does not oxidize. This is why you need to trigger it and begin the denitrfication process prior to harvest to get rid of all the nitrates. Otherwise, you will smoke it. Flush till autophagy begins, just make sure you add no nitrogen afterwards. Micronutrients for trichomes. Don't leave the medium empty for 2 weeks, that does nothing but reduce yield 10%ish. Trichomes are another thing. Trichomes themselves are not directly affected by flushing; rather, flushing affects the plant's nutrient uptake, which influences the development and final state of the trichomes. Trichomes are filled with antioxidants in the last weeks, which is what makes them cloudy. A lot of the processing of antioxidants requires energy and nutrients (mostly micronutrients ), so you don't want that soil empty for 2 weeks, you just want the carbon nitrogen ratio 24:1and no higher. She still wants what she needs to ripen. Processing antioxidants is energy-intensive; heat and light accelerate the rate at which THC converts to CBN. This is why you lower DLI, lower temps. By doing so, you reduce the oxidative workload caused by photosynthesis, which opens up the oxidative capacity for the production of antioxidants. THC is mostly processed at night when the plant's oxidative capacity is generally moreso "free and available" for work
Likes
21
Share
Selectively harvested on day 76. Trichromes mature yet she was throwing white hairs from her foxtails still. Smells delicious. Will report back after cure with final totals, I haven't harvested the secondaries yet. I am giving them a couple days to see if they do any more. Very happy with the harvest so far, and as always Happy Farming, and stay safe out there folks! Edit 7 zips. Wasn't as dense as I had hoped on the lower colas, but dense at the tops. Really behind the eyes with a strong elevated platitude.
Likes
34
Share
D61 (21/01/2021): First day for week 5 of flowering. It's incredible how the buds are forming and getting bigger. It easily doubled (if not more) in size in the last 7 days. Since beginning of bloom, I normally gave water every other days. I make sure the soil is dry and the pots feel light when I lift them before giving any water. But it's not ideal cause it means that the plant drank all the water at his disposal and maybe it missed some. I will try a different watering schedule by giving water every 36 hours instead of every 48 hours. I will still make sure the soil his not wet and the pot not heavy (soil full of water) when I will give water. At this stage, they need a lot of nutrients to produce big buds. I will give nutrients every other feeding and only Max Minerals the others. Today I gave 1/2 of the recommended dose of Max Minerals. - temp: 24-26C light ON ; 21-22C light OFF - water: PH6.3 , 329PPM , less then a gallon each - run off: PH6.9 and 1090PPM for Glue Gelato ; PH6.9 and 940PPM for Banana Kush - RH: 50% light ON ; 48-49% light OFF D62 (22/01/2021): Nothing special for today. The lamps are now at 12 inches from higher colas. - temp: 24-25C light ON ; 20-21C light OFF - no water - RH: 50-52% light ON ; 48-52% light OFF D63 (23/01/2021): I gave full dose of Max Minerals and Max Bud and 1/2 of Max Grow. All base on mid late flower recommended dose. Relative humidity % was difficult to maintain low last night. It is normal since I give water more often. I removed leaves to help reduce humidity. Both look and smell sooooo good! 😋 - temp: 24-26C light ON ; 21-22C light OFF - water: PH6 , 940PPM , less then a gallon each - run off: PH6.7 and 1270PPM for Glue Gelato ; PH6.7 and 1100PPM for Banana Kush - RH: 50% light ON ; 55% light OFF D64 (24/01/2021): I gave half dose of Max Minerals. - temp: 24-26C light ON ; 21-22C light OFF - water: PH6.4 , 360PPM , less then a gallon each - run off: PH6.9 and 950PPM for Glue Gelato ; PH6.9 and 1030PPM for Banana Kush - RH: 50% light ON ; 45-47% light OFF D65 (25/01/2021): I'm at day 65 and base on the website I bough the seeds, they are close to harvest. They say 65-75 day from seed. My girls are not ready. I guess maybe 2 more weeks. The trichomes are all cloudy for Glue Gelato and 90% cloudy 10% clear for Banana Kush. I think it is time to start flushing. I will only give tap water at proper PH for the next 10-14 days and keep looking at trichomes. I consider also reducing air temperature and humidity for the rest of the grow. We are getting close! 😍😎 - temp: 24-26C light ON ; 20-22C light OFF - no water - RH: 49% light ON ; 49-50% light OFF D66 (26/01/2021): I decided not flushing today. I gave only full dose of Max Bud. Glue Gelato is getting very frosty! She has approximately 50% white pistils and 50% brown pistils but she keep growing new pistils. Banana Kush is less frosty but thicker and look a bit behind in maturity compared with Glue Gelato. - temp: 24-25C light ON ; 21-22C light OFF - water: PH6 , 440PPM , less then a gallon each - run off: PH6.8 and 930PPM for Glue Gelato ; PH6.8 and 1220PPM for Banana Kush - RH: 48% light ON ; 47-50% light OFF D67 (27/01/2021): The electric breaker where all the equipment of my tent is plug tripped. It took me around 20 min to notice it. During that time the relative humidity % went up around 75%. I don't think it will cause anything bad but I wanted to document it. I started the flush today by giving tap water at proper PH. The tap water of my city is around 130-140 PPM. I always let it sit in a bucket for 24h. - temp: 24-25C light ON ; 20-21C light OFF - water: PH6, 135PPM, less then a gallon each - run off: PH6.9 and 625PPM for Glue Gelato ; PH6.9 and 725PPM for Banana Kush - RH: 48% light ON ; 52-55% light OFF
Likes
52
Share
@Salokin
Follow
Hi Growmies,this was the last week of nutes she’s getting. Feels like I completely misjudged how far she is along, as it seems like she has started the ripening process. Ph and ec was in line the whole time, once the leaves started fading i thought that I have a lock out or sth, so I fed canna flush for a day and continued with a fresh reservoir as per my regular feeding schedule, To no avail, as she continues to fade, even after. Not a Biggy, as the trichomes are definitely all far enough along to harvest her after the next week of flushing. Thanks for stepping by and until next week :)
Likes
82
Share
Purple Buds are amazing.I could not be happier with their color, buds are chunky and frosty, the smell is indescribable. It reminds me a certain sweet from the childhood :) and I bet it will taste even better. Later, I will show some more pictures for Industrial CBD which is doing fine. I will move Purple Buds tomorrow out of my tent for two days in the darkness and then - harvest time :) CBD has got one more week to go I think. Happy growing to everyone.
Likes
295
Share
@Ju_Bps
Follow
Hello growmies 👩‍🌾👨‍🌾🌲🌲, 👋 Plant stretched good during this first week of flowering 🦔🦔 Started Flowering nutes. Did a litle defoliation. 💡 I up a bit the supply of lamp each days. 💪 I continued the training 💧 Give water each 2/3 day And vaporise plant with water + Plagron Roots (1 ml/l) 1 l Water + Roots + Grow + Sugar Royal 1 l Water + Roots + Bloom PH @6 RQS - Easy Bloom Booster Tabs 1 tabs/5 l RQS - Easy Grow Booster Tabs 1 tabs/5 l RQS - Easy Micronutrients Plus 1 tabs/5 l (1 watering each 10 days.) 💡Mars Hydro - FC 3000 37% 60 cm. Mars Hydro Fan kit Setting 6 Have a good week and see you next week 👋 Thanks community for follow, likes, comments, always a pleasure 👩‍🌾👨‍🌾❤️🌲 Mars Hydro - Smart FC3000 300W Samsung LM301B LED Grow Light💡💡 https://www.mars-hydro.com/fc-3000-samsung-lm301b-led-grow-light Mars Hydro - 6 Inch Inline Fan And Carbon Filter Combo With Thermostat Controller 💨💨 https://www.mars-hydro.com/6-inch-inline-duct-fan-and-carbon-filter-combo-with-thermostat-controller RQS - Titan F1🌲🌲 https://www.royalqueenseeds.com/f1-hybrid-cannabis-seeds/624-titan-f1.html
Likes
5
Share
@Rizza78
Follow
Malt is sad after transplant. Red Hot good. Oozecake good. Seedlings are liking the new environment.
Likes
14
Share
@bananomet
Follow
5 days hanging inside the tent. 8 days trimmed up and finishing in the vine cellar at 16C. 30. 08. 2026 jarred up with Integra Boost 62 % humidity packs.
Likes
4
Share
SPEEDY BOOM 💥 AUTO/ KANNABIA WEEK #10 Overall Week #4 Flower This week no issues she's not the biggest plant but she's growing in extremely hot conditions and she's doing fine. This lady is ready to grow she's easy to grow she doesn't need much besides light and water. Stay Growing!! Kannabia.com SPEEDY BOOM 💥 AUTO
Likes
40
Share
@CAMOGROWN
Follow
Watch my video it explains more. Gunna be giving them water on the next three feeds then back on the bloom, I this k there's enough fertilizer in there for them as I don't RTW Thanks for having a nosey :) any tips advice welcome!! Update. Levelled out the middle. Everythings good. Tallest now 42 inches lol still growing.
Likes
114
Share
@Natrona
Follow
Hello friends and followers, Welcome to my weekly update. 3/3-9 This has been a good week for learning. 1) Autos do not tolerate high stress training. Don't do it unless you are sure of yourself. I topped too late. This reduces yield, stresses the plant and delays harvest by a week. 2) Too much of a good thing is not good. My Teapot gal has a copper excess (I believe) and unless I take her out of the copper pot, she will continue to be stunted. Everyone needs a bonsai in their garden, so I'm going to grow her out. 3) Know your plants. Other than Zkittles, my grows have been a 4 plant variety using only 1 seed per strain. Without a comparison, you don't know what to expect. I have looked at other gromies gardens for appearance, size etc. Everyone grows differently with their multitude of nutes and high-tech equipment that it's fair to say that I have to base any improvements in my grow only on what I have done in the past. Let the stacking begin; we are off and growing buds. RQS says harvest 70-75 days or 40-45 days of flower. My calculations – harvest of T3 will be April 13-18 and T2 15th-20. Based on the size of my gals, and the number of bud sights, I’m only estimating an ounce between both plants. This is one time I hope I’m wrong. For these Titans, I water 1- 2 liters every other day. Most of T2s (teapot gal) water (1ltr) runs thru to the bottom catchment. I leave it on the towel to keep humidity around the pot. T2 grew .5 inches and now shines brightly at 3 inches, T3 is 7. I topped my T3 last week after she started flower. Big Mistake. Autos can be HST only in week 2 and never in flower. If you remember my week 2 stats, neither girl was over .5 inches tall and only T3 had the second set of true leaves. There wasn’t any growth to even begin training. Know your plant. Here I should have chsnged.my grow plan and.not done any training besides defoliation. T3 in the 3-gallon air pot is larger at 7 inches now. I did a bit more lst on T3 tying branches down. The leave branches are at the most an inch long with most smashed up against the main stem. I also put a separator between the top 2 buds to give a bit of space. The stem on T3 is thick for being so small. A solid ¼ inch. If this gal was growing to her estimated height of 60cm, the main stem would be over an inch, like my Apollo grow. I will say for sure the RQS F1s are strong and sturdy. With T2’s stretches her tippy top is just peeking above the copper pot rim. She is towering at 3 inches. I keep supplementing and foliar spraying with Cal-mag but the internodal chlorosis is still visible. Despite separating the copper pot from the soil with coco liner and coffee filters, I think Teapot gal (T2) has a copper deficiency. ✅️ Slowed Growth, ✅️ Fewer branches ✅️ Internodal Chlorosis ✅️ Stumpy roots (I won’t see this until I harvest and reveal the root ball). I'll show pics at that time like I have with my other diaries. Given these RQS Titan are F1 hybrids and should be stable, I believe the height and the health differences are attributable to the copper wire teapot. They are in the same soil, same tent environment, same nutrient solution, same light, same everything except the growing container. As I stated in previous discourse, I expected the overall plant to be smaller than T3 simply based on the pot size but did not expect to see such size differences so early, not to mention the nutrient issues. Thanks for the likes and comments, I appreciate all the plant love💚. Have fun & love what you grow 💚 Sending love and light 💫 💫Natrona 💫 **************Sponsored Grow*************** Royal Queen Seeds is the first to off genuine F1 cannabis seeds. F1 hybrids are the future of cannabis genetics, offering unrivalled stability, vigor, and yields. They have eight (8) F1 hybrid strains including a CBD. Unlike regular hybrids, which can be created by crossing virtually any two cannabis plants, F1 hybrids are made by crossing two pure (also known as "inbred") genetic lines. The resulting seedlings not only grow bigger and stronger, but also maintain stable growth traits that result in a uniform crop. I would like to express my sincere thanks to @James at @Royal Queen Seeds for giving me this opportunity to grow their quality seeds. It was a hard decision to select the strain to grow; I’m excited to grow Titan F1. ==================================== Royal Queen Seeds Https://www.royalqueenseeds.com use Discount Code use **GROWERS20** for 20% discount Titan F1 stands out as one of the most potent options in F1 hybrids. Thanks to her genetic lineage, she produces sky-high levels of THC and boatloads of delicious terpenes. Plus, plants reach modest heights while churning out impressive yields. Talented breeders created this F1 by crossing inbred lines that share a heritage with Blue Dream, Sugar Magnolia, and Amnesia. Effects, Flavors, and Aromas of Titan F1: Powerful Effects and Sugar-Citrus Notes Titan F1 will treat your olfactory system throughout the flowering phase, and beyond. This auto flowering variety unleashes a powerful terpene profile consisting mostly of myrcene, farnesene, ocimene, pinene, bisabolol, and limonene. Combined, these aromatic compounds offer notes of fruit, candy, and lemongrass. With the highest THC concentration within our F1 hybrid range, Titan F1 exerts a powerful and fast-acting effect that melts the muscles and clears the mind. Perfect for enjoying after a long day at work. Growing Titan F1: Stealthy, High-Yielding Plants With an average height of 65cm, Titan F1 can grow just about anywhere and maintain a low profile. This bushy plant features an indica morphology, a huge trichome count, and develops into a mature specimen in around 73 days from germination. Gear up for a uniform, consistent crop that will thrive in practically any environment.
Processing
Likes
12
Share
Week 5 has jumped at me from outa no where :) All the girls are growing well , I can’t wait to try these Mexican Airlines they are growing nice and problem free so far , We are at the stage I like the best when I get to see the bud sites start to swell and fatten themselves up with sticky tric’s and resin