She took a lot of water these past few weeks...I only care about the seeds. I await her maturity.

Día 02. Tuve que empezar la floración. Las raices estaban empezando a salir por el caño de descarga. Además estoy notando que al quedar mucha agua atrapada entre las raíces, la toman más rápido y los 20 litros que puse no sé si van a alcanzar. Ya había tenido este problema hace bastante y me había olvidado. Pero igual no me preocupa tanto. Sé que puedo manejarlo tranquilo. Así que al final, la semana anterior fueron sólo 3 días. Ahora voy a ir planificando bien, dado que la diferencia de altura en una de las Polaris, me va a obligar a ir llevando un LST riguroso. También estoy empezando a pensar en formas para evitar las tapadas de raíces. Creo que algo se me va a ocurrir para implementar en algún momento. Voy a hacer un corte de hojas muy grande cuando haya terminado el estiramiento de pre flora. Porque quiero probar cuanto afecta a una rama el quitarle la hoja principal. Algunas he cortado y otras cuantas no. Apliqué Feeding Enhancer de Greenhouse, en forma foliar la noche que pasé a floración. Voy a hacer una nueva aplicación en una semana seguramente. Tuve que bajar la frecuencia de reigo de 30/30 a 15/45 por hora, porque creo que eso hizo que se hagan tan grandes rápido. Igual es un dato que voy a tomar en cuenta para el futuro. Día 04 Me preocupa la velocidad a la que se toman la solución nutritiva. Les puse 20 litros hace 4 días y quedan solamente 12 litros. A este ritmo voy a tener que empezar a poner mucho más de los esperado. Aunque igual, creo que cuando haga un trim fuerte de hojas, ahí van a empezar a regular más el consumo de agua. Además al haber crecido tanto las raíces, es mayor la cantidad de solución que queda estancada en las raíces y es consumida. Así que eso también será un tema a mejorar. Me gusta que las plantas estén así, pero siento que no las voy a poder controlar.

Just feeding auger and water and getting it right she love the low feed so yeah I like what she doing no the best looking but a she a keeper if you want a piney sweet smell it grows lanky as hell and the structure of the plant though but doesn’t have that appealing look while grow but hopefully the smoke is good cause that what we trying to get

Weeks 10/11 frost banger

Topped off with nutrients rich water 1100 ppm.

muy buena variedad , en las fotos de los cogollos se ve claramente que hay dos fenotipos bastante diferenciados el mas espigado para mi era el mas rico en cuanto a terpenos

topped above 5th node, trying to figure out when to switch to flower, may be another week.

• New release Cali Crasher by Doctor's Choice • Kali Mist x Ak47 x Colombian Gold • Satvia (mostly) • THC high • Yield 400 - 600gs indoors Nutrients • GreenBuzzNutrients (DISCOUNT CODE • GD42025) %25 I use the whole product range and this stuff is a game changer. I've not had one bad grow with this company and it hasn't let me down once. Terps and taste are through the roof. No need for run off in coco only during flush week. Hands down the best nutrients on the market YOU GORGEOUS GROWERS CAN NOW GET A WHOPPING %25 OFF ALL PRODUCTS USING THE NEW CODE ABOVE LIGHT/TENT • Mars Hydro FC-E6500 5x5 tent Left them in the dark for 2days in their pots and now it's been about 5days hanging. At least another week and temps and humidity are perfect. Great Strain and now I'm looking forward to a smoke. Smoke review in a month 💚🌱🏆

I found out i made a big mistake at the beginning, i didnt wash the Coco twice and that resulted in dirty Coco and a ph way too high, the way I fixed it was I Watered with 2.5 L water mixed with 1/4 strength fertilizer, water half the amount wait 3-5 minutes then give the rest, on all of them. I also forgot to mention i have started to give 0.5 ml/ calmag, since the coco take some of it because its inert, you need to give more than in soil. The next day i could See they were taking in the fertilizers and are growing Happy again. I have done more lst, i used gardening wire each 20 cm long, form them like i do The cbd ( crack ) have grown happy all the way through, she is the one I have been most excited about, its for freinds and family, who can't tolerate thc but I think this 1:1 balance, can help them 🙏 @Fast_Buds i hope you guys make a foto of one like this, These medical strains are very important to keep alive. A thing to know about clay pepples is, you need to put them in water that have a ph of 6.0 otherwise they will take the ph level way too much up, trust in your measurement devices more than the soil/coco company saying what the ph Is. PL is coming back and have started to grow again. happy growing and remember it's 420 somewhere ✌️💚

Giorni 28 Che spettacolo di odori!!! Le Rainbow sono lime/zkittlez/uva e ti impregnano le mani e ti viene voglia di staccarle e fumarle ora. Le due Pink sanno di gas/pesca (una mi ricorda l'erba più buona che ho mai fumato e cioè l' Oz Kush). Anche se una ha avuto problemi e l'ho dovuta sciacquare (#2) ora sembra stare meglio anche se alzando i fertilizzanti il colore è ancora un po' giallo. Le tre Barbara'Pie posso solo dire anche qui frutta allo stato puro ma con qualcosa ancora che non riesco a capire. Due sono molto simili l'altra è più cicciotta. La Baker Delight piena di resina e odora leggermente di biscotti ma è la pianta più indietro di tutte. Ci vediamo settimana prossima e ricorda di spendere il tuo tempo nella ricerca del seme e che nessuno ti regala niente di buono 😏

WEEK 5 SETUP - ROOT ZONES Optimizing cannabis performance requires balancing a strict temperature gradient between a cool root zone (68°F–72°F) to maximize dissolved oxygen and active nutrient transport, and a warm canopy (77°F–95°F) to accelerate photosynthetic enzyme activity and electron transport rates. There is a critical anatomical temperature gradient required for optimal cannabis metabolism: The Root Zone (68°F–72°F): Must be kept cool to maximize dissolved oxygen, preventing root rot (Pythium) and ensuring active transport ATP powers root elongation. The Metabolic Sweet Spot (77°F–95°F): The primary Electron Transport Chain (ETC) enzymes and ATP synthase complexes in the foliage require these warmer temperatures to maximize molecular collisions, accelerating respiration and carbon fixation. The Destruction Threshold (104°F): Enzymes and lipid membranes denature, causing structural metabolic collapse. Active transpiration constantly pulls dissolved O2 down through the top of the substrate like a piston. At night, the top-down pump completely stops. When transpiration shuts down after dark, the root zone can quickly become stagnant and oxygen-depleted because the mechanical "pump" is off, while the roots still need to breathe. Having a hole in the middle of the 100 gallon, in which all the air intake in an indoor grow tent comes up through the middle of the pot rather than open side panels, and having tent exhaust connected to RH allows cellular respiration to enact the exhaust, which creates a negative pressure differential that will act as a pump at night similar to daytime, but with a different mechanism. By routing the intake exclusively through a central hole and linking the exhaust to a Relative Humidity (RH) controller, effectively replacing the daytime transpiration-driven pull with a nighttime vapor-driven physical pull. Because the side intake vents are sealed, the tent is forced to draw its replacement air directly up through the center of your massive pot. This actively pulls stagnant, CO2-heavy air out of the root zone and replaces it with fresh, oxygenated room air. UVC 264nm duct sealed with HEPA filters to prevent contamination of pathogens. Constant airflow of 0.2m/s underside of the elevated pot to prevent potential runoff stagnation. Polystyrene insulation to prevent core desiccation, HVAC climate-matched intake, inline UVC/HEPA filtration, and constant underside air velocity are successfully engineered around every major failure point. Because cellular respiration spikes RH in waves, ensure your exhaust controller has a tight deadband (e.g., +/- 2-4% RH). This prevents the fan from "hunting" (short-cycling on and off too rapidly), which would cause erratic pressure shifts in the root zone. Using large-sized Hydroton (expanded clay) pebbles to fill a 12-to-14-inch diameter middle cavity in the pot solves the air channeling problem entirely. By replacing a dense substrate core with a highly porous, structural aggregate, it creates a dedicated internal air plenum. This ensures that the negative pressure differential acts uniformly across the entire vertical column of the root zone. Often referred to as a sub-surface aeration plenum or negative-pressure root system. By using negative pressure to pull or push conditioned air through a Hydroton (expanded clay pebble) plenum, this setup optimizes the root zone microclimate while preventing the typical gas stratification found in traditional containers. The 12-to-14-inch Hydroton layer acts as a high-porosity distribution vault. Because Hydroton has massive interstitial spacing, air can move through it with minimal resistance before diffusing into the denser substrate above. Instead of air channeling up a single path, the system forces the conditioned air to spread outward and upward evenly across the entire radius of the root mass. Roots actively consume Oxygen and respire Carbon Dioxide (CO₂). In standard pots, heavy CO₂ and excess Nitrogen can settle at the bottom, creating an anaerobic "dead zone." This negative pressure actively pulls those heavy gases out, replacing them with oxygen-rich, HVAC-conditioned air. Roots that penetrate the polystyrene/mesh barrier into the Hydroton core will experience incredible growth due to the hyper-oxygenated environment. However, because of the high nighttime airflow, the surfaces of the Hydroton will dry rapidly after irrigation. This will create a localized, self-regulating air-pruning zone, forcing the plant to explode with dense, lateral feeder-root branching just outside the core. Turns one's massive pot into a bi-directional, lung-like matrix. Equipped to destroy all limits set before it with nearly zero points of failure. With these safeguards implemented, the root zone environment achieves an unprecedented level of equilibrium. The plant drives the system. High transpiration creates a powerful top-down pull, dragging oxygenated moisture through the upper profile. The HVAC and HEPA/UVC intake runs passively or under low static pressure to maintain ideal ambient baselines. Transpiration ceases(Photosynthesis), and metabolic cellular respiration triggers a spike in relative humidity. The RH controller instantly fires the exhaust fan. The negative pressure vacuum instantly engages the clean, conditioned cohesive air column. Fresh air sweeps through the sealed duct on the underside of the buffer zone(pot), enters the 12-to-14-inch Hydroton plenum, and diffuses radially outward through the HVAC-controlled substrate. Stagnant CO₂ and nitrogen are actively evacuated. This setup prevents root rot, boosts oxygen levels at the root zone, and accelerates plant growth by ensuring the root system always breathes fresh air. Polystyrene keeps the core from drying out prematurely, the physical barrier keeps the media from migrating into the plenum, and the climate-controlled intake ensures the root zone never drops below its metabolic sweet spot. In standard growing systems, a root zone of this massive scale always runs into a diminishing return curve: the larger the pot, the easier it is to create cold, stagnant, anaerobic dead zones in the deep interior. This design completely smashes that ceiling. By turning the absolute center of the mass into the cleanest, highest-flowing, most oxygen-rich zone in the entire garden, it allows the root system to expand exponentially without ever hitting a wall. One is giving the plant the ultimate foundation to maximize its genetic potential, pushing growth rates, nutrient uptake, and overall vitality to their absolute limits. Also allows intake while catching all CO2 generation in the bottom half of the tent, kicking it up into the canopy every morning, even all around with 360 distribution, zero dead spots. Sub-surface aeration and magneto-electroculture matrix: a highly sophisticated, closed-loop engineering framework that perfectly bridges plant physiology with fluid dynamics and electromagnetic physics. By turning a traditional container into a bi-directional pneumatic lung, the design successfully bypasses the biological stagnation limits of massive root zones while leveraging micro-Lorentz forces to enhance nutrient mobility. Integrating a massive copper rod with an iron core (an electromagnet core) directly down the central axis of the Hydroton plenum—and driving a magnetoelectric field at the base using a neodymium magnet—shifts setup from a basic galvanic circuit to a specialized magneto-electroculture matrix. Running the earth battery's DC current through a highly conductive copper casing insulated around a ferromagnetic iron core transforms the central air column into an inductive broadcast tower for the rhizosphere. Just big enough to fill the massive root zones but not enough to leave the 4x4 tent. The physics and structural safety of this addition alter the system's dynamics in a couple of ways. Copper is an excellent electrical conductor but is non-magnetic. By wrapping the high-permeability iron core inside that copper column, you focus and amplify any magnetic flux lines generated by the circulating micro-currents. ⚠️ Extreme Handling Hazards ⚠️ 38 mm OD x 19 mm ID x 6 mm N52. ⚠️ Extreme Handling Hazards ⚠️ ⚠️Keep it well away from pacemakers, credit cards, mechanical watches, and sensitive magnetic sensors.⚠️ There is a permanent neodymium magnet at the base of this core, inducing an electrical current; this creates a localized electromagnetic actuator. Because it sits at the bottom of the plenum (where HEPA/UVC filtered intake air enters), the air moving up the column passes through a dense, structured magnetic gradient. As HVAC-conditioned water droplets and dissolved nutrient ions flow outward from the Hydroton plenum into the biochar, they cut perpendicularly through this magnetic field. This exerts a micro-Lorentz force on the free ions, altering their kinetic trajectories and potentially boosting ion mobility through the substrate's high-impedance boundaries. The central rod is sealed in a non-conductive jacket below the soil to allow the magnetic field to pass through while physically isolating the raw metal from moisture. Iron cores radically increase magnetic field strength, but they also introduce electrical resistance. If the current from the earth battery hits a bottleneck in the central rod, that energy transforms into heat. Given the root zone has a strict oxygen threshold above 75°F, use a digital multimeter to verify the central rod is not acting as a heating element. Copper is highly toxic to plant roots in elevated atomic concentrations. Because the central plenum experiences a massive, nightly rush of high-humidity air driven by the pneumatic exhaust lung, an unsealed copper rod will oxidize rapidly. This creates copper carbonate or copper sulfate runoff that will toxicify the hydroton pruning zone. Luckily, we don't top water in that zone. Roots exhibit magnetotropism (growth responses to magnetic alignment). A constant, hyper-intense magnetic field can distort root elongation or cause root tips to prematurely deviate from their lateral path toward the biochar. Ensure input voltage stays strictly in the micro-current range to keep the magnetic flux lines subtle and non-disruptive. The permanent magnetic field has a profound, measurable effect on the surrounding rhizosphere. Placed right in the middle of the massive 100-gallon pot, the 38 mm neodymium magnet acts as a powerful bio-magnetic anchor. Because the magnet is completely sealed and safe from corrosion, its magnetic lines of force will constantly radiate into the soil matrix. In plant biology and soil science, this triggers several notable physical and biological shifts. Water molecules are diamagnetic (weakly repelled by magnetic fields). When water moves through the soil near the magnet—whether from watering or root suction—the strong permanent magnetic field temporarily loosens the hydrogen bonds between water clusters. It breaks larger water groupings into smaller, highly uniform clusters. This "magnetized water" moves through soil capillaries more fluidly, lowering surface tension and allowing the roots and surrounding microbes to absorb moisture and dissolved ions much more efficiently. The field stimulates soil enzymes like phosphatase, which unlocks bound phosphorus in the soil and turns it into a bioavailable form for the plant. Many beneficial Plant Growth-Promoting Rhizobacteria (PGPR), including nitrogen-fixing strains, are magnetically sensitive and show increased activity and modular clustering under a magnetic field. The field strengthens the communication networks among soil microbes, which actively boosts the plant's natural tolerance to environmental stressors like salt or drought. Roots exhibit a subtle trait known as magnetotropism. Plant cells use internal electrical gradients to guide growth and transport nutrients. The permanent magnetic field alters the transport kinetics across cell membranes, influencing auxin (growth hormone) distribution. As roots grow into the middle zone of the 100-gallon pot, they will likely develop denser branch networks and thicker root hairs to maximize surface area contact. Magnetic field strength drops off drastically with distance. A 38 mm neodymium magnet exerts a massive effect on the soil within a 10–20 cm (4–8 inch) radius around it. In the 100-gallon pot, it will not drastically affect the outer edges of the soil, making it a perfectly sized "core zone". The roots must grow relatively close to the center to interact with the high-flux zone of the field. Once they do, 432. Explosion. Those faint, clean yellow tips with zero browning, crispiness, or structural curling are not a sign of disease; they are a system-level operational signal from a plant running at maximum physical capacity. The system uses a 1.34 kPa leaf VPD, an N52 bio-magnetic anchor, and an active earth battery; the plant's water and mineral translocation is running at an incredibly high velocity. When a cannabis plant experiences zero osmotic shock but displays clean yellow margins at the extreme tips, it points to Early Photo-Regulatory Nudging (Incipient NPQ)At 84°F and 60% RH, stomata are completely open. If the light matrix is pushing a high PPFD, the chloroplasts at the very tips of the leaves—which receive the most uniform light and highest wind velocity—are operating at 100% saturation. The faint yellowing means the plant has initiated Non-Photochemical Quenching (NPQ) at its furthest boundary. It is temporarily slowing down chlorophyll production right at the tip to dissipate excess photon energy as heat, protecting the rest of the leaf blade from building up harmful Reactive Oxygen Species (ROS). By incorporating marine crustacean biomass (shrimp and crab chitin) into the substrate catalyzed by the N52 magnetic anchor and an earth battery, this engineers a highly advanced biochemical trigger. In standard agriculture, elicitors are used topically to simulate pest pressure. In this system, chitin functions as a continuous, molecular sub-surface signal. When this organic polymer interacts with the super-fluid, magnetized water, it unlocks a powerful bio-energetic loop that forces the plant to maximize terpene synthesis without experiencing actual tissue damage. Raw chitin is a dense, insoluble polymer made of long chains of N-acetylglucosamine. In a typical organic soil, breaking down this structure takes months. However, this root zone features active soil electrolysis and magnetically restructured water. Water molecules passing through the 10–20 cm high-flux N52 magnetic gradient undergo diamagnetic restructuring. Their hydrogen bonds loosen, lowering surface tension and turning the moisture into a superfluid. This highly fluid water penetrates the crystalline structure of the crustacean biomass much faster than standard irrigation water. The earth battery's direct-current micro-voltage alters localized redox states, increasing the metabolic speed of beneficial Plant Growth-Promoting Rhizobacteria (PGPR). These microbes rapidly produce chitinase enzymes, cleaving the dense chitin chains into low-molecular-weight, highly bioavailable chito-oligosaccharides. Relevance will become clear in later weeks.

Tag 105: Trotz heller Blätter wachsen die Blüten stetig.Noch 3 Wochen bis zur Ernte!

Day 50- All looking quiet good so far, no complaints. Fairly easy grow once you set up your plants training in veg. Only minor defoliation here and there when needed to expose bud sites to the light. Happy with the girls at the moment.

Buen cultivo, pero serà mejor el proximo ya que siempre hay cosas que mejorar y pulir.

Gave the photos a haircut today. Removed some fan leaves and lower branches that wouldn't amount to much. Gave the branches to my horse because he loves them! Tried enticing the ducks with fan leaves but they weren't having any of it. They prefer lettuce, not "The Devil's Lettuce"😂 I added in a little 5-1-1 fish fertilizer to my feeding regimen as well. Still picking off inchworms. And as you can see I made it to the hardware store and put up this baby almost completely by myself. I only asked my husband to hold the center roof panel support while I screwed it in. Couldn't have been better timing since hurricane Dorian came through yesterday and we had plenty of rain. Of course it didn't fully protect them but the majority of the rain hit the roof. And then it got down to 49 F last night. It's really Fall now! The big girl (I'm calling her Gen 2, let's see who puts that together) is starting to get frosty. Rogue One is still a little behind but I'm not worried. All in good time, all in good time...

Week 8 is going great, started flush toward the end of week 7 on Zkittlez and OG Kush. Also started flushing Pink Kush CBD and Purple Punch at start of week 8. All are packing weight still and smelling very fragrant. Trichomes are starting to cloud out and I am planning on harvesting when trichomes are starting to amber.

22 to 28 D23 Noticed a huge growth spurt between yesterday and today. I guess that bottom feed really made the roots go wild. Will transplant into the autopots at the end of the week. I am not going to use the 7gallon pots anymore, it's way too much coco. I am moving down to 3.7gal pots which will be easier for the roots to reach the bottom and give me better growth. 720ppm @ 5.8 full veg this week bottom feed. They l-o-v-e it. I already see the benefits to growing photos. So much less stressful and guarantees a full tent. I wish I tried it sooner! D24 Feed 700ppm Removed a couple big fans from each plant D26 LST and defol Moved lights closer. 18" @ 160w

Cut net down this week and had a reshuffle around, dos si dos was a lot taller so move lights up and put other 3 plants on top on boxes to level top as much as i can Had to do a little late trimming to help airflow down low and just give a little more breathing space as suffered with a little rot on my first grow luckily not too bad though but fingers crossed none at all this time, i managed to avoid it on my secone grow so hopefully will be ok Plant looks strong and healthy, had no issues so far plenty of tops cant wait to see it fatten up

Hello to you from Russia, my friends from around the world. I thank all those who follow my progress and support me. Good luck! It's time to update my 13-week diary. I plan to make a harvest in a week, the plants are already fully talking about their ripeness. In General, things are going well for me, but due to weather conditions, the trip to the guerrilla cannabis plantations is postponed indefinitely. But I don't have to water them. Soon I plan on growing a new diary when the postal service delivers me new seeds and fertilizers for clones.