11/12 start of week 3 of flower hoping she is done stretching cus I'm out of room when it comes to height. Gave all the goodies plus added Fulpower and molasses 11/15 stretching seems to have stopped. Dropped humidity and raised vpd to stay around 1.5 and raised light intensity so it's 1000 ppfd at top of plant super cropped the main top to match the height of the side branches. 11/16 watered her with some wdg3000 and saps.

Adding this awhile after the fact... but me setup, bed is filled with small logs, sticks, leaves, hay, green grass, alfalfa, then redbud living soil on top 5lbs of worms added as well. Organic feeding, mainly lactic and baccilus, Kashi, knf inputs, fish shit, orca, king crab

Fust Buds Originals Amnesia Haze 5th week of flowering completed 18th Jan 2020 Welcome back to my diary of the FBT02 plant aka amnesia haze. This is plant is developing a little slower than the others , but I put that down to the haze genetics and she will probably need a bit longer to mature than the others. Absolutely no worries there from me as I don't wanna rush her. Thanks for checking out my latest update for this week 🙏

Alors aujourd'hui je fais du BHO et pour vous remercier de votre fidélité je vais vous montrer ma méthode (que j utilisé dans le passé (j ai depuis acheter du matériel un peut plus professionnel ;) Alors pour tous sa il vous faudra =1..2 seringue de 300ml ou plus dispo sur mamazon = des filtres à café (NON BLANCHIE !!!) =des colier de serrage pour fixer les filtres. = et bien sûr du gaz (butane et en général je prend du gaz filtrer 12x pour éviter les saleté qu il peut y avoir dans certain gaz . =et enfin il vous faudra un bol pour récupérer tous le nectar^^ (J UTILISE DES MOULES A GÂTEAUX EN SILICONE (rien qui accroche) Mais si vous utilisez un extracteur en plastique et ou un moule en silicone il faudra absolument prendre du butane et non pas DME =CAR LE DME ENMENE DES PARTICULES DE SILICONES EY DE PLASTIQUE LORS DU GAZAGE Voilà voilà je vais commencer et prendre des vidéo au fur et à mesure que je vais poster pour vous montrer . Après 1heure de dégazage vous aurez une fine couche ai fond qu il va falloir travailler pour y faire rentrer de l air (ne t inquiète pas j vais poster une vidéo se soir ou tu pourra voir comment faire..) Le crumble est je pense la seul sorte de bho que l on peut faire sans trop d équipement (pour le reste il faudrais evaporatrice rotative ou autre etc ) Avec le crumble c est votre main qui fais le travail = l objectif est que l air touche toute les partie de la patte comme sa le gaz sort et l air oxyde les trichome etc etc

9/17 Didn't know this was a new week or I would've taken more pictures. I'm glad I took those two plants. As it dries and I start to trim I could see where it could've turned to rot real easy. It rained enough last night to soak all the girls. The two bottoms I harvest look like the have pm on them. If so I'll wash it or through it in the concentrate bag. Found a few colas a dropped which will go in the concentrate bag. Scoping the toasted toffy and the event horizon and the both look AMAZING! I've scoped the others and I'm extremely impressed. They may be difficult to grow strains but they have high cannabinoid content. The sherb cream pie has really come to life and turned totally purple with beautiful flowers. The girl in the 50 has several soda can sized buds. I hope this weather holds up. I don't like flowers this size getting wet. The sativa leaning hydrid us the only one I may have trouble with. It's only in a 10 gal but it's enormous! If needed I coyld bring it inside at night. The buds look like cat tails. I'm used to growing indica dominant strains. Plant us super healthy though. I'll be intrigued jail for a while and I've gotta make contact with whoever is going to do my extracts. I'll keep this updated. It's a lot of work bur it's worth it. 9/18 WATERED EVERYTHING I GALLON BUT THE BOTTOMS OF THE 2ND EV AND THE TT WHICH EACH GOT A HALF. Since harvest I've noticed some pm spring up on the toasted toffy. Looking at the other event horizon through a scope the trichs are all milky with some amber. I'm just waiting for A LITTLE more amber. And for me to have time and or room. I decided to harvest the tops and majority of one of my event horizon and toasted toffy. Today during an inspection I found a couple grey mold branches and some botrytis on my big GMO on the back. This plant is done. It's by far the furyhest ahead. Septoria effected the yield a little but pistols were retracted and amber was at like 10%. I thought about it and I watched the plant next to it with the pm have a branch I supported just "slough off". Right in my face. I figured if there was a sign tjis was it. I cut that rot off and put the buds from the branch in a bag and froze them then I went around and harvested the limbs on the other plant that were furyhest along. I took about half of it. I could've taken more and maybe I should've but I'm tired. I also noticed a couple spots of grey mold on the plant in the 50. All the leaves were falling off. I finally scoped it and it was right whetr I wanted it to be. Looking at the colors I'm glad I spent so much time the past few days. That one I hung whole. The sherb cream pie has something eating the fresy shoots (probably ear wigs. But the buds are fattening and the trichs aren't quite there. I'm going to let the rest of this stuff go ad long as possible. With the exception of the other event horizon. I finally tried it. It's fucking killer. I could take that plant now. The only reason I'm not is because I have to much work on my husband's as is. I'll do some videos amd pictures but I'm tired as fuck. Got to try event horizon. Very fucking impressed! 9/19 The past 3 days I've been working 5 a.m. to dark. I went back and harvested the bottoms of the toasted toffy and event horizon 1. After injury from harvest they contracted wpm. I used this as a learning experience and put some away in the freezer for concentrates and used a peroxide and water bucket. That's what kills the p.m. anyway. I hung them and they spun in the wind. I blew them lightly with a leaf blower before putting them ok strings I had previously setup with a fan in front of it. I kicked ass today. Toasted toffy got sampled and did NOT disappoint. I had it in a jar though and it was green so I'm not counting this. I do have some dry. I have indoor left too. Like in the video that one GMO looks like it's fucking dying or something. I'd rather cut it and use it for concentrates if it effects my healthy plants. I just checked on that plant in the 50 I hung. It looks amazing under the scope and smells better. Decisions, decisions. I do have a few calls I should make sooner rather than later. We are supposed to be getting rain. 9/20 The past 3 days have been hard. The wife's medical stuff is acting up and I had to tend to harvesting a few. My whole body hurts. I even did my first bud wash yesterday! The ev and tt I took and left some buds on ended up covered in pm. So I decided fuck it and tried bud washing. I also froze some for extracts. Speaking of which I need to male contact with whoever I'm going with this year because I think I've reached the point of diminishing returns on that dieing GMO. When it comes to grey mold and botrytis I don't fuck around. Winds are really high today. Putting the scope to the sherb pie is making me second guess myself too. Oh well. It's not going to rain today. And if needed I can move them in the barn. If I get ahold of Mt processor I'll chop that GMO and bring it right there. The other thing is that I've got tons of weed and a lot of its hanging so I've gotta find someone that will do a batch of live rosin then like a elbow of dry. This is the best part of the year. We'll It's supposed to be. Cutting down good plants us bittersweet. I don't mind chopping that one gmo a little early though because it's close to hitting the point of no return. That little sativa dominant hybrid in the ten is HUGE! The buds are swelling like crazy too. It's got a COUPLE septoria spots but this thing is resilient and easy to move around. This will finish perfectly. So far I'm happy with what I have. I'm GRATEFUL. The two September plants I tried were GREAT. A 90/10 and an 80/20 and they both suprised me and got me exactly whete I wanted to be. I'll keep things updated. I did a video I'll upload. 9/21 Weather is still great and the buds don't even seem wet in the morning. The thing is is that something (rot or ear wigs probably both) have stripped lower interior branches. In some cases stripping them ENTIRELY or chewing the stem right off. It wasnt happening to my favorite GMO or the one in the 30 and the like on in the ten. The Sherb pie I noticed grey mold on 3 different branches. Last time I checked trichs it wasn't ready but I've got to get a handle on this mold/pests or it's going to he taken a little early. We have incliment weather coming Wednesday I think. I'll bring the 10 inside and if I have to I'll bring that perfect GMO in as well. I'm going to scope everything again today. I called a bunch of extractors for prices. I was going to do fresh rosin and just yank and drive but that is looking to be harder. I can get badder made CHEAP from a reputable lab. I think I'll do that. They prefer dry and that way I could through what's left from last year in there. I have this other one GMO that I've had the same issues with. I'm sick of removing bud rot or having to cut interior branches off due to pm. Tried toasted toffy and it was fucking amazing. I'm planning on trimmingvthe ev and if I finish I can bring the other one in. It's done. It's not getting any bigger. Trichs aren't changing. That GMO I am going to scope when I get home and it will be coming down in the next couple days. Otherwise I'll end up with half of what's there. The GMO I took the tops from is finishing up too. If I scope that and it looks decent and I have the time I'll take the remainder. I'm leaning towards doing at least a lb dry for extracts. I've got some frozen. I've got some hanging and most is still in the ground. I sleep on all major decisions. However, I know getting my nice buds soaked when I'm already losing shit to budrot and grey mold isn't the smartest thing. I'll probably take what I can and bring the others inside to keep them safe. I didn't think I'd have this much quantity. I knew quality would be good but this isn't a bad year quantity wise either. I'll keep this updated. 9/22 Busy as hell! Rain coming Tuesday. After a final check of the scope and the flowers and I took the GMO that all the leaves had fallen off of. That plant is going straight to extracts with the one in the thirty. I also "finished" harvesting that GMO that was furthest along. Trichs were getting amber. Been in trim jail. Was going to take the Sherb Pie but I'm not seeing amber yet. I did have to cut off some branches that had rotted. I'll keep an eye on it. It will come down when it's ready. It just sucks losing little bits of it. My favorite GMO is sooooo close to perfect. I should just take it but I'll wait. If we get rain I'll bring that and the sativa looking one in the ten is the barn. Back to work now. Before I forget what strain is what lol. 9/23 Still busy as fuck. I chopped the other event horizon amd hung it whole. It's DONE and it doesn't need to go through the rain storm. I also took the majority of the GMO early pheno. What's left will get plucked off and used for extracts. The big one in the 50 is getting dry. I have finished the event horizon and I'm not "finished" with the toasted toffy but I have it in 5 gal buckets with a food grade lid so u can at least cure correctly. The gmo is still hanging. I'm wondering whether I should wait it out or chop. I'm gonna take care of what I have inside first and hope that shit doesn't eat my plants or that it doesn't rot off. That perfect GMO has one branch with some grey mold. I might cut it off. I'll keep this

8. Woche Sticky Broccoli Auto von Zamnesia hat die Strapazen vom Mainlining Prozess hinter sich gelassen und konzentriert sich nun auf die Ausbildung der Blüten. Mir gefällt die Sorte wirklich sehr gut bis jetzt, stress steckt sie gut weg, arbeitet Fleißig und Produktiv. Wenn sie mir auch noch von der Wirkung gefällt, werde ich sie wohl auch in Zukunft nochmal ausprobieren und dann normal wachsen lassen 😊 Leider habe ich paar Probleme mit Mg durch mein Leitungswasser, Bittersalz hat sie schon bekommen 🙄

flushing week

Mandarin XL auto just had a solution change today. She looks like she is starting to bulk. She was looking kinda pail and discolored. She was due for a solution change. So hopefully she takes to it well and puts on a lot of weight. Everything has been going well, and nothing more to report. Thank you Gen1:11, Medic Grow, and Ganja Farmer. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g

Growing well.

**Encontrarás la traducción a español al final de la descripción** From/Desde: 09/02/19 || To/Hasta: 15/02/19 From day/Desde día: 71 || To day/Hasta día: 77 ----WEEK SUMMARY---- 10/02/19: Photos 1 to 5 - I must apologize for the colours of this photos, lightroom dng format and custom white balance seems to made me a bad play this time. 11/02/19: Photos 6 to 21 12/02/19: Photo 22 13/02/19: Photos 23 to 25 15/02/19: Video 26 & Photos 27 to 36 This is the last WEEK!!!!, i will only make one more irrigation with nutrients, and past 3 days 7 consecutive days of just water with Flawless Finish. You can see the amount of crystals of this babys, and i can't tell you how good it smells, touching any bud make the fingers get too sticky. Previous week and this week i was removing a huge amount of big leaves, to enable the light penetration to the lower parts where buds are not totally finished. I'm terribly impatient for Harvest time 😭 ---IRRIGATION CALENDAR--- 10/02/19 (Night) I prepared a solution with 3l water and (Big Bud, Bud Candy, Nirvana, Sensizym, Rhino Skin, Bud Factor X & Bloombastic) @ 1.6 E.C. PH6.4 ~750ml for each BlueBerry Mazar 13/02/19 (Day) 600ml of water & Flawless Finish @ EC 0.4~0.5 PH6.5 14/02/19 (Day) 400ml of water & Flawless Finish @ EC 0.4~0.5 PH6.5 15/02/19 (Day) 750ml of water & Flawless Finish @ EC 0.4~0.5 PH6.5 20/02/19: HARVEST TIME COMING!!!!!!! *****ESPAÑOL***** ----SUMARIO SEMANAL---- 10/02/19: Fotos 1 a 5 - Debo pedir disculpas por el color de las fotos de este día, el ajuste de blancos manual de los archivos dng de la app lightroom mobile me ha jugado una mala pasada. 11/02/19: Fotos 6 a 21 12/02/19: Foto 22 13/02/19: Fotos 23 a 25 15/02/19: Vídeo 26 y Fotos 27 a 36 ¡¡Esta es la última SEMANA!!, sólo haré un riego más con nutrientes y 3 días después empezaré el ciclo de 7 de agua y flawless. Podéis ver en las fotos la cantidad de cristales de estas pequeñas, y no podría explicar lo bien huele (es maravilloso). Tocar cualquiera de los cogollos te deja los dedos muy pegajosos. La semana pasada y esta he estado quitando muchas de las hojas grandes para dejar pasar la luz a los cogollos inferiores que no están tan hechos como la parte superior. ¡¡¡¡¡¡Estoy impaciente por hacer la cosecha!!!!! ---CALENDARIO DE RIEGO--- 10/02/19 (Noche) Preparo un solución con 3l de agua y (Big Bud, Bud Candy, Nirvana, Sensizym, Rhino Skin, Bud Factor X y Bloombastic) @ 1.6 E.C. PH6.4 ~750ml para cada BlueBerry Mazar 13/02/19 (Día) 600ml de agua y Flawless Finish @ EC 0.4~0.5 PH6.5 cada BlueBerry 14/02/19 (Día) 400ml de agua y Flawless Finish @ EC 0.4~0.5 PH6.5 cada BlueBerry 15/02/19 (Día) 750ml de agua y Flawless Finish @ EC 0.4~0.5 PH6.5 cada BlueBerry 20/02/19: ¡¡SE ACERCA LA COSECHA!!

Went away for seven days had a friend come by and water the garden Absolutely exploded since I’ve seen them last very pleased with all of the plants except for mystery auto number one. It is disappointing me some but hopefully the top will bring more growth. Can’t wait to see these continued to develop!!!

Things are starting to really pick up speed! New growth errrday about 1" on each branch! Still no PH issues, but man is that 1L drinking a lot! I've been having to feed 10L every 3 days between both 1Ls, so about 1.5L a day it's drinking. The 1L is also MUCH farther along than the 64L, although the 64L is about 6 days younger, so perhaps it'll catch up soon. I also snapped a couple branches on the 1L dude but patched them up and they're healing well.

Week 16 - 06/28 - 07/04 Light - 200 W HPS & 265 W LED Day Temperature - 78 F Night Temperature - 68 F Humidity - 40 +/-5 D59 Flower - Came home from vacation to some fat sugar coated buds! I flushed them with FloraKleen and molasses, this should be the last one before I snip down the main colas. Since they are close to harvest, I spent about an hour defoliating so harvest will go a little quicker. D60 Flower - So I pulled the ladies out to breathe, take pics, and to do a partial harvest. I cut the main colas off of all the plants and am allowing the lower bud sites to dense up. Until I harvest the lower part, here is the wet weight by plant: RG 1 - 177 g. RG 2 - 214 g. RG Clones - 88

Sie wächst gut habe sie heute getoppt Werde sie Ende nächster Woche auf 12 12 umstellen

I don't even know where to put this I've lost track. Still feeding everyday. The first pistols appeared about 5 weeks in and then the plants just kept growing. I've moved them To a 4x4 and switched the lights to 12-12 about a week ago. Seen to be starting to bud

Easy trim✂️ The buds are rock solid🤩 The smell citrus & earthy 🍋 See you in 2025 for the smoke report Take care

Checkout my Instagram @smallbudz to see the Small budget grow setup for indoor use, low watt, low heat, low noise, step by step. 25/10/2019 - First feed I gave her 0.25ml on 250ml of water of Biobizz-Grow, with 6.5ph. 26/10/2019 - Leafs looking a bit crooked, and some pale spot lets hope its not fungus. (gave her 100ml of just PH 6.5 water) 27/10/2019 - Feeding day, gave her 250ml water with 0.25ml Biobizz Grow, 6.4PH (changed feeding to once every 2 days with a plain water interval) 28/10/2019 - Started LST 30/10/2019 - Feeding day, gave her 250ml water with 0.25ml of each Biobizz - Grow,Bloom and Max, 6.3PH, added carbon filter and it raised the temps to 29c 31/10/2019 - A tad too much of nuts, little burn tip. (Sensi Seeds warned me but I still goofed it)

October 19th! This week we got the Diesel Berry Cough into its new home and topped them both! We also started low stress straining the Gorilla Zkittlez. They seem to be responding very well so far! Very healthy plants.

More later after drying!