Not an overly impressive strain and I would say she was not that hard to grow. If I even grew this one again I would let it go naturally with some LST. Wanted more grape flavours but they don't really come through in the smoke. There's a bit of a sharp fruity smell that's sort of piney with a hint of fuel at the end. The smoke is not too flavourful in my opinion but that just means I didn't grow it well. Super tight nugs so be careful with humidity as stated above. Also she's a bit of a light feeder so be careful with your nutes. As you can see I burnt her tips and over fed her a lot. Not a bad yield though! I've only really smoked the lowers on this one so far so that gave me a bit of a racey high, just slightly racey. I would accredit that to the lowers not being mature enough at chop. The plant is super dense and since I mainlined it the lowers didn't receive enough light. I tried to let the lowers mature more but the plant stopped maturing when I chopped the tops, this caused stress and the plant just shut down basically. Not sure if I would grow Blimburn's GDP again until I grow the real GDP.

FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 ATTENTION GROWERS!!!! BEWARE OF A SCAM COMPANY.... GREEN BUZZ LIQUIDS WILL SAY THEY WILL SEND FREE FERTILIZER BUT THEY MAKE YOU PAY THE SHIPPING WITHOUT TELLING YOU AND THE AVERAGE SHIPPING PRICE IS $100. AND THEY WILL GET ANGRY AND RUDE. THEY TOLD ME TO SUCK IT UP AND BITE THE APPLE🤬🤬 AND THEY TELL ME THIS RUDE CRAP AFTER THEY TOLD ME I NEVER EVER HAVE TO PAY OR WORRY ABOUT FERTILIZER EVER AGAIN... BS YOU RUDE, LYING GARBAGE COMPANY 🗑️ POOR QUALITY NUTRIENTS WITH VERY POOR AND RUDE CUSTOMER SERVICE AND NOT WORTH THE PRICE TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Heute am 20 BT habe ich die Pflanze beschnitten und ein wenig gelollipopped. Eigentlich hätte ich noch mehr Blätter entfernen können aber sie hat schon so genug Stress bekommen.

Hello Diary. Medusa F1 is definitely a record holder, in less than 70 days from the time it sprouted, it matured and was harvested. The second Medusa will wait a few more days, she is not yet completely ready. But incredibly, 12/01/2023 was planted and 21/03/2023 was harvested. 68 days from the day it sprouted, incredibly fast. I've always thought that if the plant grows so fast, the result won't be great, but with Medusa, that's not the case. The plant is full of hard fragrant flowers. As you can see in the photos, the leaves were completely yellowed so I removed them before cutting the branches and putting them in a box to dry. Since the second plant still needs light, I put the first plant to dry in a box to protect it from light. This week watering was usual, every three days. The conditions are great, the humidity is very low, below 40%, which is great because of the drying, and the temperature is around 26 degrees. Here's what it looked like last week. 15/03/2023 - Day 50. Watering. I prepared 7 liters of water, lowered the pH. to 6.0 and watered both plants evenly with that amount. 18/03/2023 - Day 53. Watering. The same procedure as three days earlier. 21/03/2023 - Day 56. Photographing and harvesting the first Medusa F1. I'm just really pleased with how things went from start to finish. Now it remains to harvest the second plant and wait for them to dry to see what kind of fruits I got. This is all from me regarding the Medusa F1, if anyone has any questions, feel free to write. It was a quick but great trip. See you soon with the final report.

This week was just amazing, just perfect in all ways, she grew perfectly and in the end of the week i start noticing some colors meaning this will be a beautifully colorful plant Mama hehehehe This week i started my P supplement and increase my dosages on the rest, this girl can take more so i will punch her a bit more hehehe for this week that is it but i will get my hands dirty and clean up her to open space and air flow in the room, also to help them photons get deeper down in the canopy As always thank you all for stopping by and for supporting me on this journey, i am super passion about growing and fell blessed to have you all with me on this new journey <3 <3 <3 Genetics - RQS MEDUSA F1 Ligth - LUMATEK ZEUS 465 COMPACT PRO 
Food - APTUS HOLLAND 
 
All info and full product details can be find in can find @ https://www.royalqueenseeds.com 

https://aptus-holland.com/
 
https://autopot.co.uk/ 

https://lumatek-lighting.com/ With true love comes happiness <3<3<3 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so <3<3<3 <3 <3 <3 Growers love to you all <3 <3 <3 Medusa F1 Medusa is a true F1 hybrid created from pure, inbred cannabis lines. She boasts uniform grow traits, mouthwatering aromas and flavours, and plenty of potency. If you're looking to bring stable, elongated plants into your room, tent, or garden, look no further. Mouthwatering Aromas, High Potency, and Mid-Size Plants Though she won't turn you to stone like the mythical goddess after which she's named, Medusa F1 is bound to get you plenty stoned in her own special way. Combining genetics from inbred lines deriving from Sugar Magnolia, a thick and sweet indica, and American Beauty, a fast, fruity hybrid loved for its well-balanced, positive high, the result is an autoflowering F1 variety that produces fresh flavours, a unique cannabinoid profile, and large yields. A very aromatic cultivar with a vibrant concentration of terpenes bearing notes of fresh mint alongside an upfront peppery kick, backed up by hints of fresh fruit, berries, and tangy fuel. Her thick, frosty flowers consistently produce high levels of THC and CBG, as well as high concentrations of myrcene, ocimene, farnesene, and caryophyllene. As a result, Medusa F1 has strong effects that relax and stone the body from head to toe (brought on by particularly high concentrations of myrcene and farnesene) while motivating the mind with an uplifting, creative, and motivating kick (thanks to high concentrations of ocimene). Medusa F1 seeds produce elongated autoflowering plants with long, strong branches and well-spaced internodes. Plants regularly grow up to 80–85cm tall and boast a fast flowering time of just 42–45 days (72 days from germination to harvest). Thanks to her genetics, Medusa F1 produces plenty of thick flowers with big, swollen calyxes that make for very easy trimming. Medusa F1 is very stable, handling stress and unfavourable growing conditions with ease, though she is somewhat susceptible to Botrytis, so make sure to keep tabs on the humidity in your grow room/garden

D85/F41 - 24/06/23 - She's almost ready, I think I'll start the flush soon D86/F42 - 25/06/23 - Temp is still too high, I'm trying to refresh the environment with air conditioning D87/F43 - 26/06/23 - First Thricomes Video. I'm going to start the flush today and I'll arwest next WE D88/F44 - 27/06/23 - Flushing D89/F45 - 28/06/23 - Flushing D90/F46 - 29/06/23 - Flushing D91/F47 - 30/06/23 - She's ready. Tomorrow I'll cut her

Hello Diary. The first week of flowering on my little farm is over, so I started photographing the plants in more detail and I will now start photographing on a black background as well now that they are much more interesting and beautiful. 😍 I changed the light regime in the Box, now the plants have 4 hours of darkness and 20 hours of light. As you can see in the photos, Fat Banana grew 72cm in the first 30 days which I would say is the average for Automatic on my Farm. Compared to Haze Berry it is slightly lower, but considering the strain, it was also to be expected. We’ll see how much more it will grow, I hope it stays lower than 100cm. 😏 My plan is to do defoliation in a day or two. Watering has become quite difficult due to the amount of leaves and branches but I think it will come in handy to aerate them anyway. The flowers develop nicely and there are many of them, Fat Banana is not somehow symmetrical, the branches developed differently, so it looks a little strange, but I really like it because of its naturalness. I still add BioBizz as scheduled for the current week and add CalMag but only preventively in a smaller dose. Watering is on average every two to three days. Another Haze Berry who keep her company on the Farm, I put in the middle and put a pot underneath to bring it closer to the light. It is now a real little jungle on the Farm so defoliation is a must. I am satisfied with how the plants are developing, they have good conditions and I think they are enjoying my "Little Farm". 😎 Let’s take a look at what happened this week. 17/10/2020 - Day 23. Watering and changing the light. I added BioBizz according to the schedule for the first week of flowering, I replaced Fish-Mix with Bio-Grow. I still add 1.5 ml / lit of CalMag for prevention. p.H. I dropped to 6.6 with Plagron’s Lemon Kick. After watering I changed the light mode to 20/4. Temp / Humidity on the farm - 25.2 degrees and 41% humidity. 20/10/2020 - Day 26. Watering. Same procedure as three days ago. p.H - 6.5 Temp / Humidity on the farm - 26.2 degrees and 43% humidity. 22/10/2020 - Day 28. Photographing and measuring plant height. Since the beginning of flowering, the motives for photography have doubled , so the number of photos has increased. Temp / Humidity on the farm - 25.5 degrees and 45% humidity. Fat Banana Auto - Day 28. - 72 cm This is it for the first week of flowering, now I still have to do defoliation and then with pleasure follow the development of flowers. See you soon. 🙌

Week 6 (3-3 to 9-3) 3-3 Temps: 19.2 to 24.1 degrees Humidity: 44% to 66% So... The leaf problem is still there, and its getting even worse, it looks like the deficiency i noticed on the fan leaves is spreading. I fed her some nutrients last week but no positive progression. Things i notice: - The stems are turning purple - The ridges of the leaves are kinda curled upwards - Yellowing between leaf veins. To me it looks like a magnesium deficiency? 4-3 Temps: 19.5 to 24.1 degrees Humidity: 41% to 62% 5-3 Temps: 19.5 to 24.2 degrees Humidity: 38% to 65% Watering: 1000 ml. (Only calcium) 6-3 Temps: 19.2 to 23.8 degrees Humidity: 49% to 67% 7-3 Temps: 17.9 to 23.8 degrees Humidity: 56% to 75% 8-3 Temps: 17.5 to 22.1 degrees Humidity: 61% to 81% Watering: 1000 ml. I gave her another feed. It is looking worse, the overall colour of the plant is more light green. The leaves are taco'ing and there are some burnt tips. The intensity of the light is 50% with a distance of 55 cm. And the temps are not even that high too. 9-3 Temps: 17.1 to 21.9 degrees Humidity: 55% to 82% Installed the dehumidifier, as the humidity is getting high at lights off. The diary is a month behind but she is still not fully recovered. IF SOMEONE KNOWS WHATS GOING ON PLEASE LET ME KNOW! 💚

Week in the flush I've already done three flushes to force her to use what she has, very good appearance, sweet smell, with citrus leaves in the purple color they started to appear, they stick when touching the smell exhaling through the room, mixes with her sisters It's really an easy-to-take candy factory, it didn't present any problems at any time, I recommend it. 🤗

So end up losing the first set (guess that's how you know it alive n real) never the less week was great...will do some transplanting nxt week also wanna get some more gelato cuts to get the numbers up but will see how that

Elle commence a élargir

Sept 27th: (F41) Fertigation once a day with NEW recipe (1300 EC 6.1 PH) watered until 10-20% run-off Sept 28th: (F42) Fertigation once a day with same recipe (1300 EC 6.1 PH) watered until 10-20% run-off Sept 29th: (F43) Fertigation once a day with NEW recipe (1300 EC 6.1 PH) watered until 10-20% run-off Sept 30th: (F44) Fertigation once a day with same recipe (1300 EC 6.1 PH) watered until 10-20% run-off Oct 1st: (F45) Fertigation once a day with same recipe (1300 EC 6.1 PH) watered until 10-20% run-off Oct 2nd: (F46) Fertigation once a day with same recipe (1300 EC 6.1 PH) watered until 10-20% run-off Oct 3rd: (F47) Fertigation once a day with same recipe (1300 EC 6.1 PH) watered until 10-20% run-off Note: The TUT bud are getting quite heavy :) Some branches are bending, will have to tight some of those :)

FBT2403 is growing great. She is starting to do a lot of stretching. She just had a solution change yesterday to blooming nutrition from Agrogardens. There was a big ph jump in first 24 hours. I corrected it today. Everything is looking on track. Thank you Medic Grow, Agrogardens, and Fast Buds. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g If anyone needs to purchase fastbuds here is a link for my affiliate program https://myfastbuds.com/?a_aid=60910eaff2419

Giorno 80 La Sweet Cheese è stata tagliata. Purtroppo già dalla seconda settimana avevo pensato di rimuoverla per lasciare spazio alle Crystal Candy che erano belle grosse ma alla fine dato il suo odore di formaggio/frutta ho deciso di tenerla. Le Crystal Candy anche loro sono a sola acqua da 10gg e entro 4/5gg verranno tagliate.Loro hanno sempre il solito odore di caramelle fragola/melone. A presto con qualche foto dei fiori 😊👍