Las plantas se ven bien, me hubiese gustado que estén en una maceta mas grande. Intentare hacerlo esta semana aunque no se si sea lo mejor a esta altura.

Growing a little too tall for my room, but I think the stretch is pretty much done now. I super cropped 3 of the largest colas. Probably spoke too soon last week, PH dropped like a stone down to 4.5 a few days back. They had K and Mg lock out for maybe half a day. Stripped most of the lowest 10 leaves of nutrients. This is why defoliation is not the way to go, keep your leaves. They act as storage for nutrients and give you a buffer if PH lets you down 😁 It’s also pretty difficult to get a decent photo of the whole plants anymore 😕

Day 3 of 12/12, could of vegged this girl a little longer as she Germinated a few weeks later, still I'm happy with her. Roll on the next 65 days.

This is week 1 almost. Went 13/11 recently and did a major defol. Gonna give it some cheat codes and let it flower 3 weeks before next defol. Taking 2 clones each.

continues LST some defoliation, mainly lower leaves Don’t mind the ones in the back, they haven’t been touched.

Hi people 🤗 A lot has happened this week 😄 The 3 Blue Cheese and 2 Kosher Tangie Kush which have been in the flowering tent for 1 week have become very bushy 👍 Unfortunately I just noticed that I completely forgot to take pictures of the Blue Cheese Phenotype # 3 🤦‍♂️🏻 The picture will be given later. The rest of the Vegi tent is also progressing very well. They are repotted in 11 liter pots this week, and then come to the flowering chamber die the following week The next week there will be new pictures, until then I wish everyone a nice start into the new week 🙏🏻💪🏻 Let it grow 🍀🌱

Lookin good, no more herms so far as I’ve tightened things up hopefully that’s the last of them for good. I installed a 4Inch AC infinity fan and filter as an intake so I have been able to close all of the vents. At this point the leaf strip has proven to be a solid method, I have nothing to compare bud size at this point but just the extra space it opened up is a plus. I’m sure the lowers will be a little more firm and the plants obviously haven’t had to be fed as often as usual so its saving time, water and nutrients. The added microbes have also allowed me to keep my ppm around 1000 instead of 1080ish without any sign of deficiencies. The Mandarin cookies x Dionysus has a little cal-mag issue but that was a trait from the mother which out of 10+ grows all had a cal-mag deficency. I gave everything a little flush last watering and took measurements then a good feed today REMEMBER , IF YOUR SHOPPING FOR GEAR YOU CAN USE THE CODE “BANGDANG” FOR 10% OFF YOUR ENTIRE PURCHASE FROM ANY OF THE FOLLOWING COMPANIES. @greenbuzzliquids @rainscience_growbags @gorilla_grow_tent @growlightscience.led *****Gorilla grow tent discounts extend to all companies affiliated with grow strong industries which include..***** @super.closet Lotus Nutrients Kind LED grow lights

After my weekend trip, Tamara surprises me with her full splendor after a light leaf trim. It’s also time again to give her my special mix (milk solution). This time three times the amount, since she has grown much bigger 😉. It didn’t harm her last time, and it won’t this time either, despite some concerns expressed by my YouTube viewers. In addition, Tamara receives her first liter of nutrient solution; until now I had only given her small amounts of rainwater (usually never more than 1 liter every 3 days towards the end, and sometimes only 250 ml before that). And on her 26th day birthday, I see the first stigmas… Tamara is slowly turning from a teenager into a woman. 👩🏻 Now just a little LST where I tie down the shoots again, and then I’ll let her rest for the remainder of the week… She has done so, so well up to this point 🤗😘

The plants are doing super well under nearly perfect conditions. Unfortunately I didn't have so many pictures

3/21: That last quarter-strength nutrient feeding seems to have taken well. Amnesia is bulking up slowly, and isn't letting go of as many dead leaves today. I am removing any crispy leaves I can find from Trainwreck as well. She isn't letting go of any leaves like Amnesia is, they're just ugly as sin. Oh well, they're doing their job. I am keeping the humidity to match the current temperature according to the VPD charts, like every week, so I haven't been lowering the humidity over time because of the heat in the tent. 3/22: Leaves are looking greener today. Just keeping an eye out for any loose leaves ready to be removed from either plant. Not many so far today.

Today is the start of GC's 4th week. I started tying her down...evening up the canopy a little bit. I usually get rid of the 1st and/or 2nd node, but hers are long enough I went ahead and kept them. Her canopy really opened up nicely, and everything is pulled down pretty evenly. She is going to be really nice. I haven't introduced any nutes except what is in the FFOF soil. I will start with a small feeding in the next week or so depending on what she tells me. So far I. Super impressed with 420 Fast Buds!!!!

This week was the last week of veg., I will switch to 12/12 (light/darkness) in week 6. The two Barbarian (=AK-47 x Barbara Bud) plants are now 35 and 40 cm tall and have developed nice side-branches, which have grown upwards so they get enough light for good budding sites during flowering. The plants are still fed following the Advanced Nutrients schedule.

🌱 Germination Journey with Terpyz Mutant Mentha de Croco 🌱 Hey Grow Fam! Today kicks off an exciting adventure with Terpyz Mutant Mentha de Croco genetics. I’ve got 10 regular seeds ready to sprout, and I’m looking forward to discovering some beautiful female phenotypes—and maybe even a standout male for potential future breeding. It’s been a while since I’ve worked with regular seeds, so I’m thrilled to dive in! Germination Process Overview: Here’s a step-by-step rundown of the germination setup and process, with a special focus on the equipment and nutrients that are helping these seeds thrive right from the start. Step 1: TheCannaKan Germination Pod 🌱 For germination, I rely on TheCannaKan—a device I’ve come to love and trust. It’s designed to create the perfect microclimate for seed germination, and within just 24 hours, the seeds started showing signs of life. By the 32-hour mark, they were all ready to be transferred to the next stage! I can’t recommend this gadget enough for anyone serious about getting strong, early growth from their seeds. • Why TheCannaKan? • Humidity Control: Ensures seeds stay hydrated without oversaturation. • Stable Temperature: Maintains an even temperature around the seeds, so there’s no shock or stalling. • Enhanced Oxygenation: Keeps fresh air circulating, helping prevent mold and ensuring seeds don’t suffocate. Step 2: Transfer to Root Riots & Aptus Holland Supplements 💧 Once the seeds were sprouted, I transferred them into Root Riots, known for their excellent water retention and structure that encourages strong root growth. Root Riots also have a pH-balanced, spongy texture that makes it easy for roots to penetrate, promoting sturdy, healthy root systems. At this stage, I started using Aptus Holland’s Regulator and Startbooster at 1ml/L each. Here’s why I chose these products for early growth: • Aptus Regulator (1ml/L): Helps strengthen the plants against environmental stresses by supporting cell wall structure. It’s a fantastic choice for giving young seedlings an early boost in resilience. • Aptus Startbooster (1ml/L): This product provides essential microbes and nutrients that stimulate root growth and early plant vigor. Especially for regular seeds, the early root development makes a noticeable difference in later growth stages. Step 3: Lighting with Future of Grow (FOG) LED at 200 PPFD 💡 For lighting, I’m using a Future of Grow (FOG) 600W LED. For the germination stage, I’ve dimmed it to around 200 PPFD (photosynthetic photon flux density), which provides just enough light for healthy, strong seedling growth without overwhelming them. • Why Low Intensity? • 200 PPFD ensures that young plants aren’t exposed to too much light, which could cause stress or stunting. This level of intensity is perfect for encouraging healthy development without risking “stretching.” • The FOG LED provides a balanced spectrum tailored to plant growth, setting up these young sprouts for success as they grow. Step 4: Environmental Control with TrolMaster Tent X Controller 📲 For monitoring and control, I’m using the TrolMaster Tent X Controller, which lets me dial in every aspect of the environment to make sure these little ones have the perfect conditions for germination and early growth. • TrolMaster Benefits: • Precision Control: Adjust temperature, humidity, and lighting all in one place. • Notifications: Sends updates in real-time to my device, so I can make adjustments as needed without being physically present. • Consistency: Maintains stable conditions around the clock, reducing stress on seedlings and ensuring they’re thriving. Grow Tips & Reflections: Germination is one of the most crucial stages in a plant’s lifecycle. Starting with strong genetics like Terpyz Mutant Mentha de Croco, combined with a solid germination setup and the right nutrients, creates the foundation for a successful grow. 💡 Quick Tips for Fellow Growers: • Hydration Balance: Don’t oversaturate! Moisture levels should be high enough for the seeds to sprout but not so wet that they drown. • Light Management: A low PPFD for young seedlings prevents stretch and keeps nodes tight, preparing them for a healthy vegetative phase. • Environment Consistency: Use a reliable controller like the TrolMaster Tent X to manage your settings, and consider monitoring tools for real-time adjustments. Shout Outs to the Community: Big thanks to Terpyz Genetics for these incredible seeds, Aptus Holland for their top-notch nutrients, Future of Grow for the stellar LED lights, and TrolMaster for the amazing controller. Also, shout out to all of you in the growing community—you make this journey exciting and filled with endless learning. Let’s keep growing and sharing together! That’s it for the germination update! Next up, I’ll be monitoring growth closely to identify strong females (and maybe a standout male for breeding). Stay tuned for updates on our Mutant Mentha de Croco adventure—this is just the beginning! Genetics - Mentha De Croco https://terpyz.eu/products/menta-de-croco-fern-type?_pos=1&_sid=e9237cbcb&_ss=r DogDoctorOfficial Discount Codes @ terpyz.eu - DOCTOR 15% off Nutrition - @aptusholland https://aptus-holland.com/ Led Power @ F.O.G. Future Of Grow https://www.thefuturofgrow.com/en/online-store/BLACK-SERIES-600-p489093171 Controls @ TrolMaster https://www.trolmaster.eu/tent-x As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciloved and i fell honored with you all in my life With true love comes happiness Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so Growers Love To you All 💚

Hi this is Apple fritter auto by Royal Queen No idea of the week as I have not been keeping track and the only updates will be pictures and a video once a week until harvest. Wish you all a successful grow.

Started the week with a sledgehammer flush. Noted the tips to be turning down and browning. Might be nutrient lock out so flushed with sledgehammer. Then three hours later a gallon fresh water flush. Two days later re-added nutrients as listed. Not sure how much longer these will go. Assume another 4-6 weeks before they tell me they are ready. No amber yet.

Semana 9. Día 98(11/10): Para esta semana la saque al sol ya que no tenia luz, probablemente ya la semana que entra va a dormir afuera 3 o 4 días.

💐🌟HESI contest🌟💐 💮 15.2... 💮 16.2 New videos a bit strange, but weed is also this 🤣🤣🦄💚new updates later, yeah! 💮 17.2 💮 18.2 💮 19.2 💮 20.2 💮 21.2 ____________________________________________________________________________________ ❕❗❕ Do you already know HESI products? Take a look at the details You will be fully satisfied 😉 👀 https://www.hesi.nl/en/products 📜 A look at the details of what I'm growing 📜 🍓🍌🍇Strawberry Banana Grape by Seedsman🍇🍌🍓 ⚧ Gender ▪️ Feminised ➰ Genes mS 🎄 Genetics ▪️ Strawberry x Grape x Banana OG 🚜Harvest ▪️ 400 - 500 g / m² 🌷Flowering ▪️ 60 - 65 days ✨THC ▪️ 15.0-20.0% ✅CBD ▪️ 1.0% 🏡Room Type ▪️ Indoor 🌄Room Type ▪️ Outdoor 🕋Room Type ▪️ N/D 🎂Release Year ▪️ 2019 __________________________________________________________________________ 📷🥇 Follow the best photos on instagram 🥇📷 https://www.instagram.com/dreamit420/ 🔻🔻Leave a comment with your opinions if you pass by here🔻🔻 🤟🤗💚Thanks and Enjoy growth 💚🤗🤟

Progress and Observations In week 6 of flowering, my plants are displaying significant development. The buds are swelling noticeably, and resin production is increasing, filling the grow area with a rich aroma. Weather Conditions and Plant Health Unfortunately, the weather in Germany has turned to consistent rain over the next five days, which is less than ideal for the final growth phase. To protect the plants, I've moved them into the greenhouse full-time. This controlled environment shields them from adverse weather conditions, ensuring stable conditions for continued growth. Pest Management I'm pleased to report minimal pest issues thus far. Nightly patrols continue to manage the snail population effectively, supported by lettuce leaf traps. There have been no signs of spider mites, aphids, or thrips, providing relief. With the ongoing rainy weather, I remain vigilant against potential snail problems. Low-Stress Training (LST) Update The plants I trained with LST have responded positively and continue to develop well. I did some more LST to maximize light to the colas. The canopy remains even, and the bud sites are receiving ample light, allowing for a slight upward stretch to maximize bud growth during these final weeks of flowering. I try not to cut off any fan leaves because I think they're here for a reason. I like to tug them behind the steam or the side branches. Only if the leaves show significant signs of illness or pest then I remove them. Looking Ahead As we move further into the flowering stage, my focus will be on maintaining optimal conditions to maximize bud development and resin production. I am also diligently monitoring the humidity levels in the greenhouse, as this is crucial for preventing mold growth. The plants are looking promising, and I’m excited to see how they progress in the coming weeks. Update 03.07 What is noticeable is that both untrained plants are entering the full flowering mode faster than the trained ones. Have you had similar experiences? Update 05.07 Today I checked the girls and found the Banana purple punch with the top leaves starting to curl down. After asking the community I found out that everything looks like a starting nitrogen toxicity. But only on that plant. Seems kind of strange that the others having no issues at all despite having the same amount of nutes. I decided to treat the symptoms a once so I flushed with 5l PH water. The first runoff was a little lower (5.5 / EC 1.09) but not really concerning. Afterwards I give the plant the half amount of the tripart flowering scheme (with added CalMag 2 ml/l PH 6.2). Thanks again to AsNoriu and Hashy Stay tuned for updates and like always, feel free to give feedback about things I can improve🍀🥦