At this point I’m giving the plant plain water I dropped the temperatures and the lights just waiting for runoff to be acceptable and then it’s time to chop

Poda de bajos y defoliacion en dia 18 de floracion , entutorado y focos ya al 100%. Esperemos en esta semana ya tener todas la yemas bien formadas y sacar un buen frutoo.🔥🔥#aptus

Day 43/Flower Day 15 - Stretch, stretch and more stretch. Literally have all my headspace taken up and thats using flat LED Bars! Its not for want of light, these things HAVE to be getting a DLI over 45 now if not near 50 (I need to do a test)!!! Defs going to invest in 2 Royal Blue LED Bars for next grow. As soon as I bend over/tie down one set of big pushers, another pair start up that were not being shaded/shadowed by the previous set. Worried too with the stretch being as severe, the yield will suffer! As noted in comments, will be venting the building the grow tent is in better very soon but when I can get that done is another thing!!! Looks like I am going to have to pull my extraction out of the tent and run a blow through the carbon filter and get some more ratchet hangers to give me an extra 9-12"!!! Has to be Heat/Humidity and then the feed from the lights giving them what they need. Luckily, I am due to be receiving a 6" AC Infinity Setup tomorrow so may be the way to set it up just for the last 8 weeks of the grow. Also had 2 brand new RAM 7" Oscillating fans pack up within a few hours of each other...not 4 weeks old and they're done! The Sweet Cherry Pie defs not setting buds as quick as the Red Hot Cookies...they look a few days to a week behind. This also probably means the last of growing different strains in the same tent! I don't have the space/means to set up a drying tent and need to use the grow space for that so need them to finish the same time. Both these are supposed to be a same week finisher but with the slower budset, I don't know (@Kagonisss, did you notice a difference in the bud setting between the Red Hot Cookies and the Sweet Cherry Pie???) - I could over-ripen the RHC or take the SCP when a bit under. Basically, that's it though. Nothing more to report other than things I have to engineer to get around! From the looks of it, I'll have no room to get my UVB tube in when the time comes but, dunno...we'll see. Have upped the Bloom Nutes now to be higher than the base to fuel the initial flower set. Have a bit of lower leaf fall off from lack of light/plants using the reserves and probs going to have to do a bit of a defoliate by the end of the week to settle humidity and have them top buds concentrated on. Apart from that, Happy Growing all!!! 💪

~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ ❤️💡🌱😽💨 We're back and these plants held up great while we were gone! They're getting limey tops and a little serrated so we gave them a full strength dose of calmag earlier today (will doc next week) and moved the light up a few inches..we expect they'll look better in a week or so... We also removed any large fan leaf blocking the center growth.. The Solux350 is kicking ass at 75% power, it looks like plenty of light to the eye however we do intend to run it at 100% after their flowering stretch.. not too much else to report,, great genetics and lighting make for easy weeks! Thanks for reading if you made it this far and happy harvests everyone!! 🤘😼❤️🌱 ⚡Hortibloom/Solux 350⚡ Specifications ⚙️: Diodes: Samsung LM281 Pro / Osram DR (1,440 total)💡 Driver: Inventronics 350 watt🔌 PPF: 1015 μmol/s ☢️ PPE: 2.9 µmol/j 〰️〰️ Lifespan: 50k+ hrs ⌛ Weight: 14.3lbs lbs (6.5kg) Veg Coverage: 5 x 5 ft 🌱 Flowering Coverage: 4 x 4 ft 🌼 -Uses an aluminum heatsink (no fan), quiet while operating 👂⬇️ -IP65 waterproof ratings, tolerant to high humidity grow environments 💦 -May be daisy-chained via RJ14 and managed from a single controller 💡~💡~💡~💡~💡 🌎 https://hortibloom.com/products/solux-350-led-grow-light ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_

Woche 9

Hello fellow growers! This is my first entry on growdiaries. I've been growing for about two and a half years, and got most of my knowledge following other growers from this site. I've decided to start sharing my own grows, so I can learn from experienced growers even more, and help other growers too if I can. This is around my 7th grow now. I didn't document any of the veg for this plant, and only started documenting since Week 4, but going forward I will be trying to document the whole cycle of the plant. I'm running x2 ETHOS Fanta Sea RBX & x2 ETHOS Citradellic Sunset. I vegged them for around two months in 1 liter pots, than transplanted them to the larger 15 liter pots and into my flowering tent for about a month. I usually flip them after a week or so from transplanting, but this time I was abroad and I didn't want to flip them and not tend to them during the first weeks of flowering, when the huge growth spurt happens, so I decided to flip them after I come back. The result ended up being with all plants growing and stretching like crazy during my time away, before even flipping. Once I flipped, I threw in a scrog net and bended as much as possible. A week later ended up putting up another scrog net. I was afraid that the plants would stretch right under the lights, but now during week 4, any growing seems to have stopped and the plants energy is being channeled into the buds. During the first 3 Weeks of flowering, I had a huge issue with humidity which stayed around 70%. Problems stemmed from being in a basement, bushy plants, bad ventilation & perspiration from AC + Heat from light fixture. I learned much more about humidity from this grow. It's much more stable now after adding another dehumidifiert, fixing the ventilation and defoliating heavily. See you next week for the next entry!

So i dont think i need to explane much XD you can see it all in the Videos 😍

I'm glad I found GD it's helped me asking the prices of this very First Ever grow... plug.. I learned allot and have started germinating my next set. On to the next One/Week...

Week 4 of the flowering phase has arrived, and last week flew by 🌬️🌱. The ladies are thriving, and the buds are now clearly visible! ✨ The flowers are starting to turn darker, which is an exciting sign 🍒. The first trichomes are already forming, hinting at a very potent strain 💎🔥. While the cherry aroma hasn’t come through yet, removing some leaves revealed an intense, waxy scent – very intriguing! 🌿👃 I’ll keep you updated with daily posts. Drop a like and stay tuned to see how the ladies develop 🌺📸. See you next week! Woche 4 der Blütephase ist da, und die letzte Woche ist wirklich wie im Flug vergangen 🌬️🌱. Die Ladies haben sich prächtig entwickelt, und jetzt kann man die Buds schon richtig gut erkennen! ✨ Die Blüten beginnen langsam, sich dunkel zu verfärben – ein vielversprechendes Zeichen 🍒. Auch die ersten Trichome sind schon sichtbar, was definitiv auf einen sehr potenten Strain hindeutet 💎🔥. Das Kirscharoma ist zwar noch nicht zu erkennen, aber beim Entfernen der Blätter wurde ein intensiver, wachsähnlicher Duft wahrgenommen – super spannend! 🌿👃 Ich halte euch weiterhin mit täglichen Updates auf dem Laufenden. Lasst ein Like da und bleibt dran, um zu sehen, wie sich die Mädels entwickeln 🌺📸. Bis nächste Woche!

24/3 Harvested as soon as i saw a few amber thrichs here and there. I dont like too much cbn. I learned i need to defoliate more next run, the bottom buds seem kind off airy because of lack of light penetration. I used to grow with stronger HPS lights before and now getting into the LED game. A little switch for me but ill get the hang of it. I dont have a hanging scale, ill put the dry weight here on my next post in a couple weeks. 1/4 shes dry and started to trim. Gotta clean the scissors every bud 😄 onto trim jail and curing. Will test a popcorn bud tonight 2/4 everything is trimmed and in grove bags. Froze the trim overnight and the popcorn buds and made dry sift hash this morning.

In woche 5 in flow is mir ein kleines missgeschick passiert. Habe leider einen spritzer pk 5-8 zu meinem gießwasser dazu gegeben. Ec werte und ph waren perfekt. Nur habe ich einen eisen oder magnesium überschuss verursacht. Pflanzen wurden ectrem dunkel und die neuen kleinen blätter in den buds haben sich nach unten gegreuselt. Aber gefahr erkannt gefahr geband. Habe heute das aller erstemal pk13-14 zum bio gießwasser dazu gegeben. Ec usw.. perfekt. Bin aber gespannt was ich diesesmal weedr falsch gemacht habe.👌😋😁😅😅🙈 Die saubersten und vitalsten stecklinge findet ihr wie immer bei ROOTS-FARMS. The best in austria and maybe europe

48 hrs. of dark are up and its time to chop. pots have dried from the last flush. These did not stretch as much as I would have liked I will have to adjust my light better next time and there was a lot of lower development near the media, hence not enough air flow. when I flushed the pots the water level went up to the lower growth on the Think different and the bottom was wet and rotted the bottom half. I did a mild lollypop on them I'm early flower it just was not enough, LESSON LEARNED. Chopped on 2/8/20 whole plant drying low and slow 54% RH 68F for 10-14 days then will trim and jar. 981 grams wet with the lumber. lets see how they dry. I got a rosin press coming today I will squeeze all the trim and larffy buds into dabs yummy! All in all I recommend these genetics I will try the think different again I'm sure I just got a recessive dwarf gene. I have seen other grows of this same strain same breeder that are huge and stacked. thanks again to Fast Buds 420 and Green Buzz Nutrients for suppling the goods for the grow. Stay tuned for the harvest pics and vids along with the rosin squish. Be cool to one another we could really use it these days.👏 please fell free to comment on the grow as this is my first true auto flower grow. If any one out there is experienced with rosin pressing and you have any tips for beginner's let me know I will incorporate them in the next videos. thanks

Une autre belle semaine

The temperatures, humidity, height, and watering volume(if measured) in grow conditions are all averaged for the week. The pH is soil pH. Any watering done by me is well water which is 7.6 pH and 50° F. Any listed nutrients are ml/gallon of soil spread evenly across the top of the soil. Day 1 we had high temperatures of 79° and skies were mostly cloudy. The lows at night have begun to drop below 60°F. It has been extremely humid with tons of dew in the morning. I'll continue to defoliate and spray with biofungicide to get this powdery mildew under control. Day 2 we had early morning rain followed by mostly cloudy skies. High temperature was 77. The rain took care of the watering today. I'm treating with arber again and more defoliation. Day 3 we had a high temperature of 81°F, skies were partly cloudy, and I watered 3-4 gallons from the hose. Day 4 we had a high temperature of 83° with sunny skies. I watered 4-5 gallons from the well. I treated with Arber. Day 5 we had a high temperature of 88°F. Skies were clear and sunny. The humidity was around 90% today. I watered 4-5 gallons from the well. I finally got most of the infected leaves off and have one more plant to do tomorrow. I treated with Arber again today. Day 6 we had high temperature of 89°F. Skies were sunny. I watered about 4-5 gallons with well water. I've been treating these with Arber biofungicide but it's hasn't had much affect. I stripped all the infected leaves and lollipoped two today. I'll get the third tomorrow. I'll treat these tomorrow with growers ally fungicide and see if they can be saved. Day 7 we had a high temperature of 86°F with partly cloudy skies. We're expecting rain tonight and it's super humid today. The weather is not cooperating while I'm treating for powdery mildew. This week was a success. The plants gained on average 6 inches in height. They've slowed down their upward growth and are transitioning into flower. The weather has been atrocious for cannabis. These girls are super healthy but the humidity and cool nights have caused perfect conditions for powdery mildew. I began treatment with Arber biofungicide, but it wasn't doing much. I lollipoped and defolated heavy on two of the plant and finished the third after photos on day 7. The non infected leaves are responding ok to the Arber. I'm switching now and will treat late day 7 with Growers Ally fungicide. I defolated pretty heavy, but I expect a full recovery and increased production as there will be more light penetration.

end yield of smokeable: 73gs end yield boof: 41.5gs

Missed a week... Showing nice brown hairs. 💚