Already week 7, and it’s starting with much better air humidity which makes it easier for me to stay in the recommended VPD range – currently 54% at 25 °C at canopy height. With 58, 67, 78 and 80 cm plants’ average height is about 71 cm. Odour has increased, and sometimes, but only shortly, I get the feeling the coal before the blowers cannot eliminate all of it. While the smell was a bit strange sometimes one and a half week ago, it’s now absolutely yummy, sweet and promising. As is all the sticky stuff adhering to my folding rule when I measure their size. I am a bit confused about the amount of yellowing leaves. That would indicate a nutrition deficit. On the other hand, last feeding (yesterday it was only calmagged water) brought some brown edges to their tips as I wrote. Which could indicate a slight over-nutrition. I am not *that* worried as leaves around the buds all look great (except for mentioned, but not youngest tips), and mature plants obviously tend to concentrate on bud production solely. But week 7 is quite early, or isn’t it? Any recommendations? Maybe I should go with organic fertiliser next time to avoid being stuck between two options ;) As they had run dry already, I gave each one another round of drink. Slightly less fertilised than last week. And I removed the lowest yellow branches and tiny buds that would not make it into the light in time. The Pineapples must have some mimosa genes crossed in. Each time I touch them they bow away their heads in deep dislike. The taller one looks like her head would be too heavy now … It is not, and usually they recover after an hour or so. The Sherbets are pretty unimpressed by all I do. Meanwhile I’ve been working on the Raspberry Pi BoxControl that should help me stay in better VPD ranges in the future. I am not sure how to translate this all into a more stable solution than based on a breadboard, but the state so far (and how it is supposed to work): Raspi runs headless with control software on autostart. Every minute temperature and humidity are received from a GY-21 I2C chip that should be hanging around plant tops. Data is saved in a database, VPD is calculated and signalled in form of a RGB LED color. Additionally, LCD display rotates through current stats. 3 relay modules can en- or disable misting, dehydration or an additional blower. Maybe I can add a CO2 sensor just for the fun of it (but I’d have to develop a device protocol myself), maybe even one or two soil moisture sensors. Theoretically you could also have a lighting control, but then, GPIO ports are all used. The display needs a lot of them, and while I can log onto the Raspi on my local network and view its desktop, I’d prefer to have a quick overview at place. I am not really informed about current models. Are some GPIO extensions or Raspis with extended GPIOs on the market? But so far, that’s all theory. I never had a PCB developed for my hobbyist projects, I am not the best with a solder station. Never had a Raspi run 24/7 for a really long time. Did a bit more lollipop ping in the evening. Especially tallest Shepard had fun building some more very low buds and branches. I think it can investigate its powers better on different places. Day 51: It’s getting hard to measure soil humidity with my low tech device. Soil must be full with roots and I don’t want to hurt them much. I can see them at the outlets of their pots too, sometimes a bit dry of course as these parts run dry earliest. Experiments to include the CO2 sensor in my test setup failed. I can read and reset it, but setting measurement mode and reading values don’t work. Maybe because my I2C library cannot use ClockStretchLimit. Running out of GPIO ports anyway and seeing that the soil sensors are analogue devices, I’ll probably revive my Uno too and have discovered some clever Raspi heads that should make a more stable setup (and some cooling) possible while also adding a handful of PWM ports and an integrated display. I’d like to include a camera module too and it would be great to have some ports available. A final setup would obviously include a Raspi 4 or 5 to easily enable secure online access. But so far, all working nicely in test setup. Day 54: Sometimes I wonder if they’re still growing at all, but then it’s good to have the daily pictures to compare bud width which now seems to be the main interest of the ladies, although differences are now clearer to tell between two day intervals. The taller ones look like they are one week ahead of the smaller plants, with even higher fan leaves turning pale now. Which at an estimated seed–harvest time of 8–11 weeks for both strains should be pretty common, I guess. Or am I wrong? Summerly temperatures make the temperatures at canopy level sometimes reach 31 °C, but at least the simple ultrasonic diffusers arrived and I am getting closer to a better environment control. I can at least switch the diffuser inside the tent remotely from my phone, and a deep bowl of water with a lid so the "fountain" produced will not wet the tent floor and one of the fans placed at the bottom now to lift its mist upwards seems to do the trick. Humidity increases while temperature drops, getting the plants into a better VPD level, so all I have to do is wait for the evil A to deliver the necessary Raspi components to have this automated, maybe still while this grow runs. At the end of this week, there was just a bit of height gain for the two smaller ladies who now approach their next 10 cm mark. Overall, I get the feeling it won’t be that long until harvest. Maybe with the taller ones a week earlier than the others. There’s really not that much bud growth anymore, rather refinements – like buds getting more nodes and color. I’ll investigate the trichomes every few days but would welcome your estimation.

Final Week – Late Flower The final week was essentially a clean finish to the run. The buds swelled further, becoming dense and well structured. Despite the ongoing mildew issue, the situation remained controlled and never spiraled out of hand. Lowering nighttime humidity below 50 % clearly helped slow down further spread. The focus was on maintaining stable conditions and consistently removing affected leaves. Overall, the positives clearly outweigh the negatives: strong plants, solid bud development, and very relaxed handling thanks to Biotabs and the automatic irrigation system. Now it’s simply about finishing strong and harvesting.

Respect for all of you, brother farmers! masters and beginners! thank you again for gathering on the pages of my diaries🤗 Have you seen this beautiful 4-headed girl? something tells me some nice rocks will come out of there! 👻👻

She is a tiny one for sure! Still no signs of flowering and pretty slow growth rate which I’m good with since I need to keep her tiny

Hi 👋. This week I stopped the nutrients and I started flush. In first week of flushing I use 2ml /l of Canna Flush and then only pure water until harvest. 15 liters every flush. Buds are hard like stone 😁 and the smell is amazing. Now i know why they call it Zkittles 🍍🍓🍬🍊. Thanks for watching.peace✌️

Dia 1 en maceta de 2lts. A la tierra le agregamos Great White para aumantar el crecimiento radicular, en pocos dias estiraran y se pondran muy bien

Hey ihr Lieben! Nach 10 Tagen Trocknung habe ich das Curing begonnen. Die Äste haben geknackt und mir signalisiert, dass sie bereit sind. Nach 5h Handarbeit war ich dann fertig. Mega anstrengend :P! Aber hat sich sehr gelohnt :). Trotz das ich dieses Mal anstatt mit mineralischem Dünger mit einem ein Komponenten-Dünger gedüngt habe (Hesi Bio-Bloom), habe ich sogar mehr herausbekommen... Bin sehr zufrieden :). Nach dem Curing habe ich das Material in die Terplocbags gepackt und lasse sie nun dort schön fermentieren - das hat letztes Mal sehr gut geklappt und kann ich nur empfehlen. Danke an alle die mich bei meinem 2ten Run begleitet haben, ihr seid die Besten! Mir hat es auch mega Spaß gemacht und ich freue mich schon darauf, meinen 3ten Run mit euch zu teilen - mehr Infos dazu kommen bald.

Since this is my first time around, before getting started, I took a week to finetune my freshly built setup. Took me a couple of days to get the parameters in order, mostly battling high humidity due to wet soil straight out of the bags. (Plagron Promix) At the beginning of this week i first put the pots in the tent (actually a 4 by 5) and started feeding the soil the myco alraidy. Figured it could be benificial. Them being autoflowers, I planted the seeds in the original pots and covered them with solocups. Watering mostly around the solocups multiple time per day wit a pressure dispenser. I took about 72 hours for the seeds to start germinating. Kept Par levels on the high side (350 and up day by day to 480 in the last days of week 1, probably less to the plants themselves because of the solo cups) thinking the strong genetics could handle it. All the while checking for signs of to much of it. That didn't occur, even after taking of the cups a day or two after germination. Nice as I am, I did not take any pictures, this week! But! some footage from the room where it all happens :)

This two were part of another diary and got moved out due to space reasons at VW8 and moved back indoors at VW20 https://growdiaries.com/diaries/218151-auto-god-s-glue-grow-journal-by-yan402 13.09.25 VW21 Both are looking good and are developing tighter nodes than when they were outside, I'm going to have to keep cutting them back every once and a while I also applied nematodes against thrips and fungus gnats. 20.09.25 VW22 some spots and some yellow leafs, I think it's a root problem, probably root bound, but both seem healthy and are getting thicker so maybe just top up with Coco coir and give a slight different nutrient schedule less Tri Part Bloom could do the trick MAYBE lol. 27.09.25 VW23 Topped up the pots with extra coco coir and trimmed the side roots a bit, both plants were root bound 📹 03.10.25 VW23 did a HST/LST session 📹 12.10.25 VW25 Done a major HST session to try and keep them in line with the Sunset Sherbet GF I have going in the same tent, rest in the video 📹 17.10.25 VW25 ffj/fpj/fish 30 → 60 ml 19.10.25 VW26 it just became a one plant diary, keeping #5, #6 gets it's own diary for testing nutrients. 20.10.25 VW26(?) Feed tweak: added 3 g Calcium Nitrate/ 30 L (≈ 15 ppm N + 10 ppm Ca) 25.10.25 VW26 I'll be repoting tomorrow, 26.10.25 VW27 rest in the video📹 🌱💦🌱💦🌱💦🌱💦🌱💦🌱 Day to day tasks & actions 🌿 🌱💦🌱💦🌱💦🌱💦🌱💦🌱 25.10.25 VW26 – Fed 5l of #1 → 2l runoff 26.10.25 VW27 -- Fed 3l of #1→ 1l runoff 27.10.25 VW27 -- Fed 3l of #1→ 1l runoff 28.10.25 VW27 -- no feed no water 29.10.25 VW27 -- Fed 5l of #1→ 2l runoff 30.10.25 VW27 -- Fed 5l of #1→ 2l runoff 31.10.25 VW27 -- no feed no water 01.11.25 VW27 -- no feed no water (*RUNOFF reused for tomato plants) 🍶💧🍶💧🍶💧🍶💧🍶 💧 Nutrients in 30 L #1 🍶💧🍶💧🍶💧🍶💧🍶 💧 TriPart Micro: 10 → 30 → 40 ml = 0.33 → 1.00 → 1.33 ml/L 🍶 TriPart Grow: 0 ml = 0.00 ml/L 💧 TriPart Bloom: 10 → 30 → 20 ml = 0.33 → 1.00 → 0.67 ml/L 💧 Cal-Mag: 60 ml = 2.00 ml/L 🍶 Home-made FFJ/FPJ (new batch): 30 → 60 ml = 1.00 → 2.00 ml/L 🍶 Calcium Nitrate (Calcinit): 3 g ≈ 15 ppm N + 10 ppm Ca 💧 pH Down: Citric acid (BuxXtrade) — adjust to ~pH 6.0 📦 TOTAL: ≈ 160 ml liquids + 3 g solids per 30 L = ~6.0 ml/L active mix 🍶💧🍶💧🍶💧🍶💧🍶 ⚙️✂️⚙️✂️⚙️✂️⚙️✂️⚙️ ✂️ Tools & equipment ✂️ ⚙️✂️⚙️✂️⚙️✂️⚙️✂️⚙️ ✂️ 2× MarsHydro SP3000 ⚙️ MarsHydro 150mm ACF Ventilator ✂️ Trotec dehumidifier (big unit) ⚙️ Mini no-name dehumidifier ✂️ Kebab skewers (LST – stainless) ⚙️ Wire + roast skewers (LST assist) ✂️ Scissors (HST) ⚙️ Vacuum (for spills & cleanup) ✂️⚙️✂️⚙️✂️⚙️⚙️✂️⚙️✂️⚙️✂️⚙️ 🍒🍭🍬🌈🍒🍭🍬🌈🍒🍭🍬🌈🍒 🦄Fantasy Feast ( Seeds)🦄 🌈🍒🍭🍬🌈🍒🍭🍬🌈🍒🍭🍬🌈🍒 Species: Hybrid (Regular) Genetics: The mother is Unicorn Whip by Dirty Bird Genetics. The father is Charcuterie by Cannarado Genetics. Effect: Unknown Mixed effect body and head high Flavor: Some phenos are Skunky gassy fruity, some are fruity sour citrus with a chemical touch and a touch of skunk Flowering: Estimated 8–10 weeks Resistance: Strong — Testing phase done YouTube Link: https://youtube.com/-m8h?si=A7x4Zlr2kj-_ga31

Week 13 and 3rd week of flower started today 8/29. I did some Schwazzing last night! They were definitely ready!!! And today they are absolutely LOVING their new cut, leaves justa pointing right up 😎 Now I just sit back for a bit and watch the progress 😁 I have a video on my YT of me doing the Schwazz: https://youtu.be/gV8Ca02IJIY If it doesn't click here with a link you can just copy and paste! Happy growing everyone ✌️🍀✌️ UPDATE: 9/1 Everything is looking good! The ladies are still taking well to the Schwazz and flowers are coming along nicely! Starting to get that beautiful aroma 🙃 It's hurricane season so we'll have some rain coming up but I'm only 3 weeks in flower so that will be gone come crucial time. Temps outside are starting to go down so it's looking like a nice, gradual transition! You don't want to immediately adjust your temps, rh, etc. You have to ease it all down during early flower 😉 That's about it for now, just wanted to share my vibes with yall. It's all about the VIBES 😎 Happy growing everyone ✌️🍀✌️

Harvest completed and plants are now hanging to dry. I focused on a clean, controlled dry, keeping temperature and humidity stable to preserve terpenes and overall quality. This phase is all about patience and letting the work done during the grow settle properly. I’ll keep monitoring conditions closely and update later with the curing phase, where the final aroma and smoothness will really come together. Stay tuned 💚

Development is good, plant smells very nice Not too skunky, i like it ;) Plant is loving the nutrients...

Very good journey to me, she has responded very well to the lst training, providing me beautiful colas, enough for me to have nice clean organic nuggets to smoke. I would definitely would run this Ak420 by seedstockers again, the sweetest phenotype was the number #2 which you can take a look at here in my page!

Pure Ice cream close is doing great. I hst her canopy early week. I switched her light time to 12/12 today to get the flowering process going. I also trimmed out a lot of bottom growth and started defoliation on the dense canopy. I will be doing more in about 2 weeks. Mainly I am concerned with keeping her stretching down. So she don't get too close to the light. Every thing has been going well for most part. A few Challenges ahead, but I think I will get through them. Thank you Spider Farmer, and Pure Instinto Seeds. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g

Day 98 The plant is deep into the late flowering stage and clearly showing end-of-cycle characteristics. Buds are fully developed, dense, and heavily coated in resin, with the main cola standing tall above a well-filled canopy supported by the net. Side branches are carrying solid flowers of similar size, giving the plant a balanced, structured appearance. Most fan leaves have faded significantly, with widespread yellowing and some dry, browned edges, especially on lower and mid-level leaves, The overall color palette has shifted from vibrant green to autumn tones, reinforcing the late-stage look. The plant's energy appears fully focused on the flowers, which look mature, swollen, and sticky, creating a strong visual impression of a nearly finished grow

Hello everyone, The girls are finally outside in 20 gallon fabric pots. This season I have a greenhouse for them and I hope it goes good. Still have to build the first cages around them and start stretching them. 🎊🎉 finally, summer is here 🎉🎊 See you guys next week 🤞🤞🤘🤘👊👊👊

Semana de cosecha! Al fin el tan esperado momento momento se aproxima y no puede tener una mejor pinta! Realmente he quedado maravillado con la belleza de este fenotipo muy parecido al que promociona el banco en su portal, así que muy satisfecho por eso. Solo esperar a que se seque bien el sustrato y estaremos cosechando estos bellos frutos 🤩😍

Week 9 now all growing perfect so this the last week of veg then they are going to 12/12. @growerchoice @SHOGUN COCO A 4ml/L 160ml @SHOGUN COCO B 4ml/L. 160ml @SHOGUN ACTIVE BOOST 2ml/L. 40ml @SHOGUN CAL MAG 1ml/L 20ml @SHOGUN ZENZYM 2.5ml/L. 100ml

So the babies just broke the surface. I am still setting up the grow room. I am going to be setting it up with 12 autopots, 6 of them with the airdomes. I plan on adding more lights as well. I will continue to update frequently. Fingers crossed and here we go! 😃😃😃

This is probably my favorite plant out of the mix, it looks pretty healthy. I think it can take more light and nutes. My plan is still to take a bunch of cuttings for the future and to sell.