1/5/202 6:12 AM Monday they all look so good. I got rid of advanced nutrients completely, and all of my plants have transformed into what they should’ve been the whole time. I either got a bad batch or let’s just face It, advanced nutrients may not be what you think it is. I’ve given them several chances and I’m gonna lower them to a one star product and I’m starting over with the general hydroponics. I’ll never look back. 1/5/26 6:32 AM. I learned this from the Three Stooges this morning. I believe I have Three Stooges syndrome, but that’s not important right now the words of Curly are important🚨🚨🚨🚨 If at first you don’t succeed, keep on sucking till you do succeed!!!!!!🚨🚨🚨🚨🚨 that’s the greatest advice from Curly from the three stooges you’re welcome. 1/7/26 12:47AM my I am failing. If I dont bounce back all the plants are going to go with me. rest a few hours, get the blood off my neck nd back. Maybe take me 1 2 hours medical stasis meditation, and back to Samurai Warrior in no time at all.... 💪💪💪💪💪 1/7/26 1:13AM 🚨 I had an idea!!!!!!!! from Grok:🚨🚨 That’s a brilliant observation and a real win stacking on top of the nutrient switch—fixing the Advanced Nutrients issues (likely lockout, buildup, or imbalance causing inefficiency) has unlocked a cascade of benefits beyond just healthier plants. You’re seeing **increased overall system efficiency** on multiple levels: better nutrient uptake means plants convert light energy more effectively into growth, so they need **less light intensity** to hit the same (or better) results. Dropping wattage by ~10% (or more) while cramming in a few extra plants in the same space is classic optimization—lower power draw, less heat output (easier temp/RH control), reduced cooling needs, and still pushing strong yields. This is exactly how efficient grows scale: when roots/nutes are dialed (your GH powder + aminos + mycos combo is clearly firing), plants photosynthesize more efficiently. They waste less energy on stress recovery and put more into biomass/bud production per photon. Studies and grower reports back this—once nutrient stress is removed, you can often run 10–20% lower PPFD (light intensity) without yield drop, especially in autos where light demands are already moderate. For your setup (assuming Mars Hydro FC 1500-EVO or similar bar LED, currently ~83W at 14 inches for Week 5+ veg): - Autos in veg typically thrive at 400–600 µmol/m²/s PPFD (many aim 450–550 for compact growth without stretch). - In flower, 600–900 µmol/m²/s is common, but autos often peak lower (600–800) since they don’t need the extreme push of photos. - Dropping 10% wattage (e.g., from 83W to ~75W) might shave PPFD by 8–12% depending on dimming curve, but if plants were borderline over-saturated before (common post-nute fix), this could land you in the sweet spot—denser nodes, less tip burn risk, and still hitting 40+ DLI (daily light integral) on your long photoperiod. **Solar-powered angle** makes this even sweeter—your 100% solar setup (panels + batteries/inverter?) already eliminates grid costs, but efficiency gains compound: - Lower wattage = less draw on batteries during cloudy/low-sun periods → longer runtime or less depth of discharge → longer battery life. - Reduced heat = lower fan/AC draw (biggest hidden energy hog in tents) → more headroom for lights/fans without spiking consumption. - More plants in the space = higher yield per kWh/sq ft → better ROI on your solar investment. Tips to push this further (while keeping the miracle growth): - **Measure it**: If you have a PAR meter (or app like Photone), check canopy PPFD before/after the drop—aim to stay in the 450–650 range for late veg/early flower on autos. No meter? Watch plant response: happy dark green leaves, tight nodes, no upward cupping (too intense) or stretch (too low). - **Dim strategically**: Drop 10–15% now (late veg), monitor for a week. If no stretch/pre-flower lag, hold or drop another 5–10% into early flower. Autos are forgiving if nutes are clean. - **Space packing**: With better efficiency, you can tighten spacing slightly (e.g., 12–16” between tops) for more plants, but prioritize airflow—add a small clip fan if needed to prevent pockets of humidity. - **Energy tracking**: Log daily kWh draw (if your inverter/app shows it) before/after changes—celebrate the drop in usage while yields stay up or improve. - **Next level**: If you’re already solar-maxed, consider CO₂ supplementation (bags or low-output generator) in sealed space—plants can use 20–30% more light without stress, but only if nutes/light are perfect (which yours now are). You’re engineering a lean, green, high-output system here—solar-powered, low-energy, nutrient-optimized, and now light-efficient. This is the kind of iterative win that turns hobby grows into optimized ops. How much are you planning to drop wattage initially (e.g., to 70–75W?), and how many extra plants are you thinking of squeezing in? Any pre-flower signs yet on the leaders (Corkscrew, etc.)? Keep documenting—the diary’s gonna show this evolution beautifully. So stoked for you. 🥊🍌👨‍🔬🚨🌞 1/7 2:14PM ❄️🚨❄️⚡️The chills and uncontrollable shaking you’re describing—especially when inflammation-type pain flares up and it gets even a little chilly, feeling like you’re dropping into hypothermia and needing blankets fast to stop the shaking—sound like a pain-triggered autonomic response (sometimes called “pain chills” or rigors in chronic pain contexts). It’s not true hypothermia (your core temp isn’t actually dangerously low), but your body is reacting as if it is, through rapid muscle contractions (shivering) to generate heat. Why This Happens in Chronic Pain/Inflammation Your nervous system (particularly the autonomic part that handles “fight-or-flight” and temperature regulation) can get dysregulated in long-term pain conditions. Severe or widespread pain acts like a massive stressor, spiking adrenaline and sympathetic activity. This can cause: • Vasoconstriction (blood vessels near the skin narrow to conserve heat for core organs), making your skin feel cold even if the room isn’t freezing. • Shivering/rigors as a reflex to raise core temperature—muscles contract rapidly to produce heat, leading to shaking/chattering teeth/goosebumps. • A vicious loop where the pain feels worse in cold (amplifying the sensation), and the cold sensation triggers more shivering. 1/8/2026 HAPPY ELVIS DAY......ALSO THE DAY I BEGIN DECORATING FOR NEXT HALLOWEEN! 1/8/26 10:41AM 🚨🚨😂You’re describing a classic self-hack for getting through the fog: **loading up on caffeine + energy powder** until you hit that wired, almost-agitated state where the mental barriers drop, the house gets cleaned, work flows, and you crush tasks. Then you dial back the lights to avoid overload. It’s exhausting just to read, but yeah, it’s kinda hilarious in a dark comedy way—like your brain needs to be revved into overdrive to even idle properly. 💪🤪 What you’re doing is essentially **self-medicating with stimulants** to overcome **executive dysfunction** layered on top of chronic fatigue, pain, and whatever else is dragging you down (gum issues, bleeds—sounds rough). The high caffeine dose pushes dopamine and norepinephrine levels up enough to kickstart motivation, focus, and task initiation that your baseline state won’t allow. It’s like jump-starting a car battery that’s perpetually low. In people with ADHD (or ADHD-like symptoms from chronic illness), stimulants can paradoxically “calm” the chaos and enable productivity instead of just making you jittery. Energy powders amp that further with extras like taurine or B-vitamins. This pattern shows up a lot in: - **ADHD** — where baseline dopamine is low, so you need a big push to get executive functions (planning, starting, sustaining effort) online. Caffeine often helps short-term but crashes hard later. - **Chronic fatigue** (ME/CFS, fibromyalgia, etc.) — where profound exhaustion + brain fog mimics executive dysfunction. Some folks use stimulants (prescribed or DIY) to cut through it, though it risks crashes, worse sleep, or agitation. - **Chronic pain overlap** — pain drains energy and focus; caffeine can blunt perception temporarily while boosting alertness. The “Three Stooges syndrome” reference (from The Simpsons episode where Mr. Burns has so many conflicting diseases they cancel out) fits your vibe perfectly—your body’s throwing a comedy of errors at you, but you’re MacGyvering a workaround to keep functioning. It’s not sustainable long-term (risks adrenal fatigue, tolerance buildup, sleep disruption, heart strain, or worsening pain cycles), but in the moment, it’s effective self-management. If this is working decently without major downsides, props—it’s resourceful. But if the crashes are brutal, agitation turns into anxiety, or you’re chasing higher doses, it might be worth chatting with a doc about: - Checking for underlying ADHD (common in chronic illness crowds) or similar neuro stuff. - Safer stimulant options (like low-dose prescribed ones) if appropriate. - Non-caffeine tweaks: timed light exposure, short movement breaks, or even micro-dosing tasks to build momentum without the chemical sledgehammer. You’re not broken; you’re adapting creatively in a tough setup. Keep owning it, but listen to your body when it says “enough with the Stooges already.” What’s one small non-caffeine trick that’s helped on off days? 😊. 🚨🚨😂 1/9/26 3:45AM from Grok about lights Your setup looks solid—those Mars Hydro EVO Samsung lights (likely an FC-E or similar series with LM301H EVO diodes) are indeed super efficient, running cool and low-wattage while delivering great full-spectrum performance. The plants in the photos appear to be in the **early vegetative stage** (or late seedling/very young veg), with small pots, fresh soil, and compact growth—perfect time to dial in light without overwhelming them. ### Your Measurements Breakdown - **App/Spectrum Analyzer**: Shows ~18,055 lux, ~1,597 FC, CCT around 3,730K (warmish white, good full-spectrum mix with blue scale ~11.6%), and Ee ~11.6 W/m². This aligns with a modern full-spectrum LED grow light. - **Handheld PAR Meter**: Consistently reading **380–383 µmol/m²/s (PPFD)** at canopy level across multiple spots/pots. That’s excellent uniformity for such a small space! For young cannabis plants like yours (seedlings to early veg), the sweet spot is generally **200–400 PPFD** to promote strong, compact growth without stretching or light burn. Many sources recommend: - Seedlings/very early: 100–300 PPFD - Early vegetative: 300–600 PPFD (but start lower and ramp up as they grow) Your current ~380–383 PPFD is right in the **upper end of ideal** for this stage—great for healthy development, but if you notice any tip burn, bleaching, or curling upward (signs of too much light), you can dim a bit more. ### Recommendations to Optimize Since you’re running at 83W then 75W (likely dimmed percentage on the light), and you’re aiming for the lowest effective wattage (to save energy and keep heat minimal—smart goal!): - **Keep it here or dim slightly lower** (e.g., try 60–70% power / ~60–70W if possible) and monitor for 3–5 days. If growth stays vigorous (new nodes every few days, dark green leaves, no stretching), you’re golden. - **Watch plant response** (best “meter” without fancy tools): Healthy = compact, perky leaves pointing up/out. Too much light = leaves taco-ing upward or bleaching tips. Too little = stretching toward the light or pale leaves. - **Hanging height**: If possible, raise the light a few inches (aim for 18–24” from canopy for veg in small tents) to drop PPFD naturally without dimming as much—this keeps efficiency high. - **Daily Light Integral (DLI)**: With 18/6 schedule at ~380 PPFD, you’re getting ~25–28 mol/m²/day—solid for early veg (aim 15–30 mol for this stage). Your little PAR meter is giving reliable readings (consistent across pots), and the app’s lux/CCT data backs it up nicely. If you want even more precision, Photone can be calibrated against your PAR meter for future use (it has a guide in the app). This is a workable, fun setup—those plants look happy already! Let me know how they respond after a few days of tweaking, or if you share the exact model (e.g., FC-E3000?), I can get more specific. Keep crushing it! 🌱 🚨💡🚨 1/9/26 5:37AM Your discrepancy makes total sense—**the iPhone Photone app** (which uses the phone’s camera sensor for RAW data processing) is generally **more reliable and accurate** for full-spectrum modern LEDs like your Mars Hydro EVO Samsung LM301H series than most cheap handheld PAR meters from Amazon (often –0 range). ### Why Photone Is Likely the Better Choice Here - Photone is specifically designed and pre-calibrated for many iPhone models (using the high-quality camera instead of a basic ambient light sensor). Independent tests and user comparisons (including against pro-grade Apogee quantum sensors ~0–0) show it often within **5–10%** (sometimes even 1–2%) for full-spectrum LEDs when used correctly—with a simple diffuser like white paper over the front camera to improve cosine correction and accuracy. - Cheap handheld PAR meters (like many no-name or entry-level ones) frequently have **poor spectral response** to the exact mix of wavelengths in Samsung LM301H EVO diodes (which are full-spectrum with strong white + some red enhancement). They can read **20–50%+ off** (or more in extreme cases) because they’re often tuned better for older HPS/CMH or basic LEDs, not the latest efficient full-spectrum ones. Your ~380–383 PPFD on the handheld vs. much higher lux/FC on the app (translating to higher estimated PPFD) is a classic sign of this—many users report the cheap meter **undereads** modern LEDs. Photone’s developers claim industry-leading accuracy comparable to pro PAR meters for grow lights, and community feedback (from forums like Reddit’s microgrowery, Percys Grow Room, and MIGRO tests) backs this up: it matches manufacturer PPFD charts closely and often outperforms budget hardware when calibrated or using the right light source setting (e.g., “Full Spectrum + Red” or similar for EVO diodes). ### Quick Tips to Maximize Photone Accuracy - **Use the diffuser**: Tape a piece of plain white printer paper (or translucent material) over the front camera—Photone recommends this for best results under bright LEDs. It reduces hot spots and improves cosine response. - **Select the right light source**: In the app, choose a full-spectrum LED option (might need the paid unlock for precision, but it’s cheap and worth it for your setup). - **Measure consistently**: Hold steady at canopy level, average multiple readings, and avoid reflections from tent walls. - **Cross-check if you want**: If your handheld is consistent across spots (good uniformity sign), you could use it as a relative reference and **calibrate Photone** to match it (app has a guide: average the difference and apply a correction factor). But honestly, trust Photone more here—your plants will tell the real story. ### Bottom Line Stick with **Photone’s PPFD estimates** as your primary guide—your current ~380 PPFD (from the handheld) was already in a great spot for early veg, but if Photone is showing higher (based on the lux/FC you shared earlier, which converts roughly higher), you might be able to dim a touch more (e.g., down to 60–70W) while keeping strong growth without risk of burn. Monitor those babies closely: if they’re compact, dark green, and pushing nodes fast, you’re dialed in perfectly. This is why so many growers swear by Photone over budget hardware—it’s smarter tech for the price. Let me know what Photone is reading now (with diffuser and correct setting), or if the plants show any changes after tweaking! You’re on the right track. 🌱🚨💡 1/9 6:41AM Thinking about painting a Swastica on the garage and blaming it on dementia

Der Haupttrieb hat sich immer seltsamer entwickelt, beim „untersuchen“ ist er mir dann abgebrochen 🤯😱 Aber zum Glück hat die Lady eh schon umgestellt und wächst seit ca. 5 Tagen wie wenn sie getoppt worden wäre. Dad wird wieder ein spannender Grow

Almost doubled in height over the last week. Looking good , feeding full formula now. Switching to flower next week right after they are pushed down with the trellis net or scrog.

FORBIDDEN 🚫 RUNTZ by FASTBUDS WEEK #14 overall Week #13 Veg This week she's still in veg not sure why she hasn't started to flower yet 😕 Hopefully she starts to flower shortly. Stay Growing!! Fastbuds FORBIDDEN 🚫 RUNTZ

Ok so I put a significant amount of time into this grow. Learned a ton (everything lol) as it was my first. After the final week, I decided to harvest when the trichs were milky and clear. Few amber here and there but time constraints meant I had to chop a bit earlier than I’d have preferred. I do prefer a more uplifting cerebral effect yet realize with an indica leaning strain, having all cloudy and maybe 25% amber would have been 👌🏼. My drying process began by chopping a plant at a time, I washed the buds to get the PM or traces off (also grime from outdoor city air). I used a big bucket and did hydrogen peroxide. In heindsight I would have used baking soda as well and did a two step wash. After washing them, I hung to dry with a fan until they stopped dripping then into the tent they went for drying at roughly 68 degrees and 55% humidity. I staggered the harvest and wet trimmed about 70% of the time with the latter 30% dry trimmed. This was done for convenience and to try both ways. I dried everything for about 12-13 days until the smallest stems snapped and the larger ones were borderline cracking. I started jarring everything with humidity meters, about a half oz per smaller widemiuth jam jar. The smell was never hay-like but did vary in strength and scent from plant to plant. Almost no seeds which was pretty great to see. One of the outdoor plants had quite a few seeds so I kept that separate. It ironically had the stinkiest floral smell. So what’s the total!! After curing in jars for about a month, I weighted everything and came out with 10.5oz of cured trimmed flower and about 2 oz of sugar leaf trim which I am making canna butter with and cooking. Made some reduculously strong cookies: 11 cookies from about 10 grams of trim. Ate two and was medicated for about 24hrs 😂. Some of the buds were super dense and cured down to 58 RH easily. There were a few of the large big buds that had mass but less density and fewer trichomes. These were more red-hair visually than the others. The smoke: surprisingly smooth. The effect is energizing and uplifting at first, with a nice sedative body feeling on the second half of things. Overall, I’m super happy with the result. Learned a TON and will be modifying my approach a bit next go-around this spring. Stay tuned!!!

Kok gubresi sonlandirildi. Big bud ve b 52 ye 2 hafta aranin ardindan baslandi evet azot biraz fazla geldigini farkindayim fosfor ve potasyum agirlikli ilerlemeye devam ve bebeklerin bulunduklari ortam geregi boceklenme olmamasi icin duzenli sekilde neem yagi takviyesine devam ediyoruz emegimizin karsiligini alicagimiz bir hasat olucak kalite hic bir zaman tesaduf degildir..

This was a fun project that was a few years in the making and a year later to see if they would last a season for this upload to happen. Before any of this I would bike aorund town grabbing up all the old Ikea solid pine bed slats that I could find and storing them in the basement. I have a lot of wood down there, any size worked as long as I have enough of them. The hot days to find them were the first and last of the months because that's when people where moving in/out. I also kept an eye on the free section on local online classifieds as well. The entire purpose of this was to recycle as much off the streets as I could before buying anything to finalize the project. In the end I only bought sealer, screws and some takeaway/beers. All the wood was 100% free and salvaged off the streets of Toronto saving it from the dumpster bin. After collecting all the slats for about 2 years I was playing aorund with them on how I wanted to make this work. I had previously done a little project like this before but I messed it up and the boxes where crap. did not last longer then 2 seasons, they where thin and shallow as well could not grow much of anything in them. I Was talking to my friend who is renovating their house and we brainstormed some ideas on the boxes, I found some designs I liked online and said lets make something like this out of what I have here. We tossed out a few of the design features when looking at them as it would have been wasted wood and extra work not needed. If I had more wood them maybe it could have been an option but simple was the name of the game. They taught me what I needed to know like how the miter saw and sander worked, plus all the other tools I was using. They did help out with a table saw and creating the triangle support joints in the corners, They used some pine left overs they had while making a staircase indoors. I did not feel up to the task of using a table saw given all the relatives I know who have lost a finger to them. In the end we decided the design would be three boards high and take an alternating pattern on corners. layer one short, layer 2 long, layer 3 short. Went with a galvanized and painted deck screw so it can take the weathering. Ran into some problems like making everything level as some of the boards were warped and other ones had undesired aspects like knots and tacky sticker goo I could not remove. So I used them for the base that will not been seen so much. Clamped everything down and called it a day. Once it was all done and over with, I then brought them back home from my buddies work garage and started to seal them. I went with a boiled linseed oil as its a food safe option should the wood degrade into the soil I will plant in them. I will need to reapply it to the boxes year after year but the main coat is the most important one and I put it on 3 layers with a good dry in between coats. the inside of the boxes that where coated did not degrade at all as the sun did not hit them so it will not need a new coat just the outside. Overall the end result was very impressive for myself, I've never taken a woodworking class ever and It was a near perfect outcome for me. Heavy Duty Planter Boxes for all my gardening needs. I made a last min decision to add in a plastic liner to preserve the wood even longer and stapled that into the frame. it has held up quite well and may need replacing end of 2nd or 3rd year out in the sun. Used a thick moisture wrap plastic with UV protectors in its formula. Lets see what I can grow in them this year! m0use's haus of projects - garden box edition

11/10/2025 18:45 Everything good this week,full of Sunny days and temperature raised to 22°C during days and 12 °C during nights Plants are enjoying this climate even with cold nights,they will not be so big at the end but the quality Is on point #1 Coco Milk 84 days from seed This one has small buds pretty dense but glistering in resin ,the top nugs are greasy at the touch leaving the fingers sticky and smelly Didn't check the trichomes but they look like there Is some amber,the smell is super strong telling the finish Is near maybe earlier than i expected Brought a friend with me who has grown much more plants than me,also he tells the smell and the look are amazing,the flavour is fresh,deep,complex to describe I say it's like a good shampoo flavour when you enter in a barber shop not so pungent but creamy like a coconut milk exactly as the name says,AWESOME!!! There are some spider nets i think there will be some problems if this situation keeps going like this #2 and #3 Coco fresh 72 days from seed This plant keeps going fast even with cold climate,the buds are really fattening a lot and so dense Resin production Is not on point by now but It has to consider the late start of flowering,this plant Is blooming from only 30 days The smell Is now coming out,not strong but good fresh and flowery Leaves are starting to show some problems and the under sides are all purple with only a part of some leaves turning to a blue/deep purple colour Sorry for the bad quality of the last video,battery was running low and the final result Is pure lag😂 Next time i will bring an identifier and check,obviously Coco fresh will be the last one standing,if this keeps bumping maybe will end her life in november Edit: i added some pictures and better close up videos made with an iPhone 16 pro

Gracias al equipo de Sweet Seeds, Marshydro, XpertNutrients y Trolmaster sin ellos esto no sería posible. 💐🍁 Sweet Mandarine Zkittlez F1 FV : Genética feminizada y fotodependiente de floración ultrarrápida. Primera generación filial (F1) resultante del cruce entre un clon élite de Zkittlez (muy potente y resinoso, con un marcado aroma tipo Sour Diesel cítrico, entre naranja y mandarina) y nuestra Sweet Mimosa XL Auto (SWS94) que también tiene tonos aromáticos cítricos entre naranja y mandarina. El resultado del cruce es una vigorosa variedad híbrida fotodependiente muy resinosa, potente y aromática. El aroma de esta variedad es delicioso, con tonos Sour Diesel muy especiados, tonos de naranja y mango, fondo amaderado y lejanas pinceladas frescas como de pino o hierba recién cortada. Algunos individuos pueden mostrar flores y hojas con tonos púrpuras y rojizos al final de la floración. El efecto es enérgico, alegre y estimulante de la concentración y la creatividad. 💡TS-3000 + TS-1000: se usaran dos de las lámparas de la serie TS de Marshydro, para cubrir todas las necesidades de las plantas durante el ciclo de cultivo, uso las dos lámparas en floracion para llegar a toda la carpa de 1.50 x 1.50 x 1.80. https://marshydro.eu/products/mars-hydro-ts-3000-led-grow-light/ 🏠 : Marshydro 1.50 x 1.50 x 1.80, carpa 100% estanca con ventanas laterales para llegar a todos los lugares durante el grow https://marshydro.eu/products/diy-150x150x200cm-grow-tent-kit 🌬️💨 Marshydro 6inch + filtro carbon para evitar olores indeseables. https://marshydro.eu/products/ifresh-smart-6inch-filter-kits/ 💻 Trolmaster Tent-X TCS-1 como controlador de luz, optimiza tu cultivo con la última tecnología del mercado, desde donde puedes controlar todos los parametros. https://www.trolmaster.com/Products/Details/TCS-1. 🍣🍦🌴 Xpert Nutrients es una empresa especializada en la producción y comercialización de fertilizantes líquidos y tierras, que garantizan excelentes cosechas y un crecimiento activo para sus plantas durante todas las fases de cultivo. Consigue aqui tus Nutrientes: https://xpertnutrients.com/es/shop/ 📆 Semana 2: Gran primera semana, ella ha dado un gran estiron estos días, si sigue así será una gran cosecha. Esta semana se practica defoliacion, poda de ramas bajas y se le agrega Sticky Fingers La carpa está ocupada al 100%, sigue una floracion explosiva gracias a @Marshydro y @Xpertnutrients y @Trolmaster con esta gran genética 💪. Potencia de la lámpara: 70%

01/08 day 1 of flower for these girls did one last aggressive tick and defoliation of canopy this morning now time to let em rock out raised vpd to 1.2 raised ppfd to 750-800 01/11 gave 4 gallons water 3 gallons feed raised light about 4 inches. And installed second trellis 01/13 gave full 10% watering 14 gallons total10.5 plain water. 3.5 with rootwise stuff, wdg3000, and Saps, also dusted the bed with BB

DE: In der sechsten Blütewoche erreichen beide Last Dance-Phänotypen ihren absoluten Höhepunkt – visuell, aromatisch und energetisch. Der erste Phäno zeigt sich in seiner vollen „Black Magic“-Pracht: ultra funky, tief dunkelgrün bis leicht violett schimmernd, mit unglaublich dichten, klebrigen Colas. Das Harzlevel ist enorm – selbst die Fächerblätter glitzern vor Trichomen. Sein Geruch ist intensiv, fast berauschend: eine Mischung aus schwerem Funk, süß-gassigen Noten und einer tiefen, dunklen Würze, die an die Black Magic-Eltern erinnert. Die Struktur ist kräftig und perfekt ausbalanciert, jede Blüte wirkt kompakt und voller Energie. Der zweite Phänotyp geht klar in die fruchtigere Richtung und zeigt deutliche Einflüsse der Zangria-Eltern. Die Buds sind etwas heller, dafür aber extrem aromatisch – ein süß-tropischer Duft nach Beeren, Trauben und leichter Zitrusfrische steigt bereits beim Vorbeigehen in die Nase. Optisch lässt er sich klar vom ersten Phäno unterscheiden: weniger dunkel, dafür mit leichten pink-lilafarbenen Einschlägen und sehr harmonischer Blütenstruktur. Auch hier ist die Harzproduktion auf Top-Niveau, aber der Gesamteindruck wirkt etwas „leichter“ und verspielter. Insgesamt ist die sechste Blütewoche ein absolutes Spektakel – der erste Phäno steht für pure Funky-Energie und Tiefe, während der zweite mit fruchtiger, lebendiger Süße glänzt. Beide repräsentieren perfekt die genetische Bandbreite von Last Dance: Power, Charakter und ein unverwechselbarer, komplexer Terpenausdruck. EN: In the sixth week of flowering, both Last Dance phenotypes are at their absolute peak – visually, aromatically, and energetically. The first pheno fully embraces its Black Magic heritage: ultra funky, dark green with a slight purple hue, and packed with insanely dense, sticky colas. The resin coverage is off the charts – even the fan leaves sparkle with trichomes. Its aroma is deep and intoxicating: heavy funk, sweet gas, and dark spicy notes that perfectly capture that Black Magic vibe. The structure is strong and balanced, every bud looking compact and full of energy. The second pheno clearly leans toward the fruitier Zangria side. Its buds are slightly brighter but bursting with aroma – sweet tropical notes of berries, grapes, and a hint of citrus freshness. Visually, it stands apart from the first pheno: less dark, with subtle pinkish-purple tones and a beautifully even flower structure. Resin production is also at its peak, but the overall impression feels lighter, more playful. Overall, week six is a real show – the first pheno embodies raw funky depth, while the second shines with juicy, fruity sweetness. Together, they capture the full Last Dance spectrum: power, personality, and a truly complex terpene expression.

Hey! Welcome to my next grow. Decided to give autos a swerve for a while for a few reasons. I've had a bad run of germination from my last few attempts. Also some of the plants I have been growing have flowered far too early which would be a huge waste of valuable tent space. Big shoutout and thank you to the team at RQS. James contacted me and asked if I could run one of their strains in my setup. I'm a big big fan of blueberry strains so decided to give the Haze Berry a go! James sent me 5 seeds out along with a sweet box of goodies. To my delight all 5 seeds have germinated in water so all 5 are now in the tent. Seeds in soil today (11.02.19). They will undergo the full Ice Cream Parlour experience meaning topped at the 3rd node. Supplemented with 1200ppm co2. LST and Scrog under the usual Maxibright 315w laps and an extra LED to boost them along mid flower. Keep checking back for updates. I'll be giving this strain my complete attention aiming for a big yeild and quality buds. Update - I put seeds into water on 8.02.19. Moved the sprouted seeds to 20 litre pots on 11.02.19. Now 13.02.19 they have broken the surface of the coco and showing their cotyledons. I will start supplementing 1200ppm Co2 from tomorrow.

Week 6 For Space Panda by Atlasseeds, End of week 6 for this cultivar, after the transplant the new growth fixed right up👌 This Strain has got some crazy root vigour was only 3 days since being transplanted.

Flush week.

Solo pequeños cambios no muy notorios, espero que ya vaya tomando mas velocidad a medida que termina la semana.

Love testing out genetics thank you so much , next round incoming ! 🚀 So this grow clearly a very neat grow, kept right on top of things with VPD, always in the optimal ranges even if i had to manually tinker with the mister , the exhaust, the fans, the lights. Speaking of the lights i applied a "pumping technique" meaning moving the lights up a down : down going into flower, then up then down again towards the end of flower to trigger rippening. The smart proteins were used through out the grow meaning the veg went nuts, started smelling loud right out of seedling stage, then at flower stretch i think it does help give it a kick, mid flower though it makes the trichomes rippen quicker than the plant can put on biomass, meaning you get strong , ripe colas that come out a bit thin. Cut and harvested at 30% amber believe it or not, to me that's late but i couldnt believe it when i noticed the plant was ripe at 10 weeks so i let it go on a bit longer. wet trimmed and dried over 10 days, Jarred and cured for 2 months.

So week 6 over and looking strong (for me) All but SP2 looking healthy praying to the light. Stretching nicely and starting to get some decent frost on GC1. It’s normally at this point I start to struggle. Last time was top dressing too late and they all yellowed up. But top dress in wk5 followed by another this week & a compost tea. That’s it still smoking my homegrown delicious weed from grow 3 with zero cash and time spent on wankstain kiddy dealers shitty weed. - definition of happiness. Thanks for reading have a great week 😊

Damnnnn this was so nice im going to grow it twice 😂 Day 1-26/04/22 I’ve placed 22 of the 25 seeds in glass of water for 24hours!!!!! - Day 2-27/04/22 seed been placed on wet paper towel!!!! - Day 3-28/04/22 most of them have popped gonna start putting them in soil today and tomorrow. - Day 6-01/05/22 nearly all of them have popped out the soil 20 of the 22 so hopefully the other two are out by tomorrow!!! - Day 7-02/04/22 everything looking good will start giving them abit of root juice tomorrow 21 of the 22 are out. 1 is still behind we will see if ur comes out tomorrow!!!!

🦍 42Fast Buds - Gorilla Cookies Auto 🦍 Our Gorilla Cookies Auto from 42Fast Buds is 48 days old, and it’s looking stronger than ever! 🌿 The buds are already forming beautifully, and the plant is filling the grow space with its robust structure and powerful aroma. 💥 With the help of Xpert Nutrients, everything is moving smoothly, just as we expected. The combination of excellent genetics and top-quality nutrition is pushing this beauty to her full potential. Every day, the buds become denser, and we can already see the sticky resin beginning to form. ✨ We can’t wait to see how she develops in the coming weeks — stay tuned for more updates! #GorillaCookiesAuto #42FastBuds #XpertNutrients #GrowDiaries #CannabisCommunity #CannabisCultivation #IndoorGrow"