Likes
Comments
Share
Die Pflanzen entwickeln sich gut. Bis auf die Mimosa Gusher. Sie scheint sehr gestresst auf die 13/11 Beleuchtung zu reagieren. Aufgrund dessen ich die Beleuchtungsdauer auf 12:30/11:30 reduziert habe.
Likes
9
Share
Fail .... Nitrogen fail ... And Red spider in final stage ... I think the roddy spiders were present in the soil used .. and they infested more plants ... .. despite all this, it is an excellent cannabis i grow again
Processing
Likes
17
Share
@Salgeezi
Follow
Started watering 2x a day a few days into week 6. Starting today I will be watering 3x a day as two just wasn't enough. Plants looked like they wanted more. Outgrowing my 2x2 tent for sure. Underestimated coco as in soil I was able to fit 4 autos in this tent. Lower branches aren't getting much light as the top half a of plant just shot up like crazy last week. No room to bend the lower branches down. Not sure what to cut off at this point lol
Likes
3
Share
@DannyDank
Follow
First appearance of the little runt she is in a smaller pot Few issues with some of the leaves I didn’t really do much except squeeze the affected spots or strip the worse leaves Nutrients I literally just grabbed some growth and was planning to go back to get the bloom but never did but they gave me a smaller tester of the home product boom and just used that along side the Biobizz
Likes
6
Share
@CalGonJim
Follow
1/12/26 4:18AM MONDAY.....💪💪💪💪👌 1/12 CANNAKAN DAY MEDICINAL SLAVERY WOULD MAKE HARVEST A BREEZE!! ABOUT THE LEDS Yes, the **Samsung LM301H EVO diodes** in your Mars Hydro lights (likely an FC-E series like FC-E3000, FC-E4000, or similar) are among the most efficient horticultural LEDs available right now—individual diodes hit **3.14 μmol/J** efficacy, pushing the whole fixture to around **2.85–2.9 μmol/J** PPE (photosynthetic photon efficacy) in manufacturer specs and independent tests. That's top-tier for full-spectrum grow lights, meaning they convert more electrical power into usable plant photons than older diodes or cheaper LEDs. If they "seem more efficient than the PPFD meter says" (your plants thriving at lower wattage/height adjustments), that's actually common and not a contradiction—it's often the **real-world efficiency** shining through once nutes/stress are fixed. Here's why this happens and what your recent wattage drop (a few more watts lower) likely means: ### Why Samsung LM301H EVO Can "Seem" More Efficient Than Raw PPFD Readings Suggest - **High PPE + Uniform Distribution**: These diodes excel at producing photons in the PAR range (400–700nm) with minimal waste (heat/loss). Mars Hydro FC-EVOs achieve strong average PPFD (e.g., 750–1000+ μmol/m²/s in tests at recommended heights/power) with even spread—no hot spots wasting energy. When your nutes were suboptimal (Advanced Nutrients issues), plants couldn't fully use the light (wasted photons → stress, stretch, lower efficiency). Now dialed in (GH powder + aminos + mycos), they convert more of that PPFD into growth—making the light "feel" stronger/more efficient even if meter numbers stay the same or drop slightly. - **Meter Limitations & Calibration**: - Handheld PAR meters (especially cheap/older ones) can under-read full-spectrum LEDs like LM301H EVO (strong white + red enhancement). They often have poor spectral response to the exact mix, reading 10–30% low compared to pro tools (Apogee SQ-500) or calibrated apps. - If you're using an app like Photone (mentioned in your diary), it's generally more accurate for Samsung full-spectrum lights (especially on iPhone; Android varies but often close with diffuser/paper). Many growers report Photone matching or exceeding cheap handhelds on LM301H setups—sometimes showing higher effective PPFD than a basic meter implies. - Bottom line: Your plants are the ultimate meter. Thriving (miraculous growth, no burn/stress) at lower wattage means the effective usable PPFD is higher than a potentially under-reading meter suggests—efficiency win. ### Your Wattage Drop & What It Means Lowering by a few more watts (on top of the earlier ~10% drop) is smart and aligns with the efficiency gains: - Dimming on Mars Hydro FC series is **very linear**—tests show PPFD percentage tracks close to (or slightly above) the dimmer % because diodes run more efficiently at lower currents (less heat/loss). - Example: Dropping from 100% to 90% might only reduce PPFD by ~8–10%, not full 10%, due to that efficiency curve. - Your plants handling it (still "miraculously better") without stretch or pale leaves confirms the sweet spot: likely 450–650 μmol/m²/s veg/late veg range now, with room to push if pistils emerge. - Solar bonus: Every watt saved = less battery drain on cloudy days, cooler tent (less fan/AC draw), and more headroom for extra plants without spiking consumption. **Practical next steps**: - Recheck PPFD (if using Photone/handheld): Average multiple canopy spots at current height/power—aim 450–600 for late veg autos, 600–800 early flower. - Watch response: If nodes stay tight/dark green/no cupping, you can drop another 5% or lower height slightly for denser canopy. - Log kWh if your inverter shows it—track the drop to celebrate the savings. - If meter still "under-says" vs. plant performance, trust the plants more—Samsung EVOs are proven beasts when the rest of the grow is dialed. This is textbook optimization: nute fix → better photon use → lower power for same/better results → solar efficiency skyrockets. You're building a truly lean system. How low are you at now (e.g., 70–75W total?)? Any pistils or new growth explosions today? Keep the momentum—it's paying off big. 🥊🍌👨‍🔬🚨🌞💪💪💪💪💪 1/15/26 12:36AM L-Phenylalanine: https://pubchem.ncbi.nlm.nih.gov/compound/L-Phenylalanine#section=Crystal-Structures That’s your Mars Hydro bar-style LED grow light setup in a compact grow tent (looks like a 2x2 or similar Spider Farmer tent branding on the mylar walls), running super efficiently right now! Breaking down what I see from the photos: • The light is a multi-bar LED fixture (probably from Mars Hydro’s FC series, like FC3000, FC4000, or a smaller EVO variant) with Samsung LM301H (or similar LM301B/H EVO) diodes—these are high-end, efficient chips known for uniform distribution, low heat, and great full-spectrum output (warm white + red/IR boosts for veg/flower). • It’s hung at 19 inches (measured from the light bars to the canopy or sensor plane, with that white dotted line marker). The tent shows a hygrometer/thermometer combo reading 76°F / 53% RH (nice stable veg conditions—cooler side helps prevent stretch). • Your PAR meter app is showing 327 μmol/m²/s PPFD (Photosynthetic Photon Flux Density) at that spot/height—solid reading for where you’re at. • Plants look like young cannabis in veg stage: multiple small pots (fabric or repurposed buckets like Krøger cottage cheese tubs—classic budget move!), healthy green canopy with some colorful accents (maybe early purpling or strain traits), topped or in early training, sitting in coco coir or similar media. • Power draw: ~50W current (from the energy usage screenshot), averaging super low over time (0.48–0.76 kWh daily average). That’s impressively efficient—likely dimmed way down or a lower-wattage model (e.g., 150–300W rated, but running at partial power). Total consumption over 30 days at ~14.5 kWh is pennies on the electric bill. This aligns perfectly with your earlier plan to target ~500 PPFD but getting great results at lower wattage/intensity. Right now at 19” and 327 PPFD: • That’s in the sweet spot for early-mid vegetative stage cannabis (typical recs: 300–600 μmol/m²/s for veg, starting lower ~300–400 for young plants to avoid stress, ramping up as they bush out). • Bar-style lights like this excel at even spread (no hot center like older quantum boards), so your canopy is getting consistent light without bleaching or stretch in spots. • Low power (49.6W) means minimal heat buildup—fans and passive cooling handle it easily, keeping temps/RH dialed (76°F/53% is golden for veg; prevents mold and encourages compact growth). Why it feels “great results at lower than recommended”: • Samsung diodes are top-tier efficient (often 2.8–3.1 μmol/J), so you hit usable PPFD without cranking full power. • Many Mars Hydro FC models recommend 18–24” for veg at 50–75% dim (your 19” fits right in). • Your plants are responding well—lush, no obvious deficiencies/stress, and you’re feeling physically ready to top/fill pots after the delay. To push toward your 500 PPFD goal without overdoing it: • Lower the light a few inches (try 16–18”) incrementally—PPFD scales roughly with the inverse square law, so dropping height boosts intensity noticeably (could jump 20–50% depending on spread). • Or bump dimmer % if it’s not maxed (your 50W draw suggests plenty of headroom). • Retest PPFD at multiple canopy spots for average (center often higher, edges lower in bars). • Watch for tacoing/upward leaf curl (too much light) or stretch (too little). This setup is dialed for low-energy, healthy veg growth—perfect for your “lower wattage wins” approach. Plants are happy, tent’s stable, and you’re crushing it efficiency-wise. If you drop the height or dim up, snap another meter reading/pic—I can help fine-tune further. How old are these ladies (weeks from seed/clone)? Any specific strain notes, or planning to flip to flower soon? Keep the momentum—today’s a win! 🌱💪😂 1/18 11:58AM. BRAM STOKERS TRAILER PARK DRACULA........I SHOULD BE WORKING ON THE PLANTS BUT THIS IS REALLY GOOD. MINA AND HER DAD ARE RUNNING PROPETY SCAMS, SHE CONVINSES THESE LOSERS THEY HAVE MAGIC DRACULA POWERSS....AND WE STEAL THEIR TRAILLER. REINFEILD RANDY , JULIANFIGURES IT OUT AND BLACKMAILS BOTH OF THEM. AND MUSICAL GUEST KISS!! A GREAT HALLOWEEN EPISONDE.... OH I FORGOT I AM SUPOSSSED TO BE GRWOING PIT.
Likes
11
Share
@Tmasm
Follow
Saudações Iniciar diários fast buds Encomenda chegou dentro do prazo, muito discreto. Dia 16/11/2023 Selecção de 5 sepas, colocando em papel toalha Dia 17/11/2023 Colocando em vaso final, com um cúpula para manter umidade alta. Agora é esperar que corra tudo bem Não se esqueça de ver novidades em https://2fast4buds.com
Likes
7
Share
Week 3 flower day 16 the ladies are getting massive and tall, i knew i did a mistake veging them too long but no worries i hold my fingers that the wont starch more then they are, im very limited in height.. anyway the plants are very healthy and they are always hungry. The CO2 is like steroids for them I reach the easy to 2.2 and I know I can push even more. I’ll do it in the next weeks. After 21 days days i going for defoliation, I don’t want to do it now to stress the plans. I prefer to do it after this stretching finish. ** update week 3 day 19, i hade to raise up the light to to the ceiling of the growing tent, I was surprised how much slurricane#7 stretching.. I also unfortunately needed to do some super croping in week 3 it’s a bit risky but i had no choice some of the flowers reached the leds and the leafs got burned a bit..
Likes
21
Share
@BLAZED
Follow
Week 3 (15-2 to 21-2) 15-2 Watering: None. No pictures, but i do have a timelapse from 4-2 to 15-2. I bought an Wyze V2, and i recorded all my plants growing in my pre-growing closet. Now the cam hangs in my 3x3 tent with 2 Gorilla Kush, and 2 Chemdog, so thats why this is the only timelapse i have for the Deep Candy. The Deep Candy is in a separate tent, maybe i will buy an extra cam for this tent, so i can shoot timelapses for all my grows. Let me know if u like it or not! 16-2 Watering: 94 ml. 17-2 Watering: None. 18-2 Watering: None. 19-2 Watering: 133 ml. 20-2 Watering: None. As you can see, since 19-2 the leaves are showing some problems. Maybe she is just hungry, as there are already 3 weeks past, and the Plagron Lightmix has enough nutes in it for approx 3 weeks. I see some problems on my other plants aswell, so maybe something with the feed or the PH is off. Or maybe she dont like the Silica i gave her while she is still in her 0.5L pot. We will see how it goes. 21-2 Watering: 60 ml.
Processing
Likes
10
Share
Start of week 2, day 8 of flowering. The plants are sagging a bit in these photos, as I took them just before feeding, except for the pics in the grow room, they are just after feeding. So far, they all look good and healthy, a few leaves are showing some small deficiency signs, hopefully that will go away as additional nutrients are added over the grow cycle.
Likes
18
Share
Blueberry Headband as well as the OJ have been looking a little peaked the last two weeks. Red hairs appearing. Growth slowing. Even starting to affect the Cheese. Raised the light from 12” to 24 and turned it down a bit. Also, pulled the plants out and leached them. Been a while and it is needed, I think. Should see an explosion of good growth 2-4 days from now. Flushing always creates a flurry of good stuff! Blueberry Headband (1) from Humboldt Seeds, Cheese (1) and Orange Juice (1) from Dinafem Seeds. https://www.dinafem.org/en/orange-juice/ https://www.dinafem.org/en/blueberry-headband/ https://www.dinafem.org/en/cheese/ Lighting https://www.horticulturelightinggroup.ca/products/260w-qb-v2-led-kit Soil Amendments https://www.gaiagreen.com/product-page/all-purpose-4-4-4 https://www.gaiagreen.com/product-page/glacial-rock-dust https://www.gaiagreen.com/product-page/mineralized-phosphate http://www.seasoil.com/ Worm castings Sunshine Mix #4 Epsom Salts Molasses
Likes
6
Share
Week 1 Flower – Roller Coster Haze (Zamnesia Seeds) Lights Flipped, Ride Ascending The ride has shifted — welcome to Week 1 of Flower for the Roller Coster Haze girls. We’ve officially flipped the lights to 11 hours on / 13 hours off, marking the start of their journey into bloom. While they’re not showing any floral signs just yet (no pistils or preflowers), this moment is crucial, it’s the beginning of the shift, and everything that follows builds from here. ⸻ Why 11/13 Light Cycle? Most growers run 12/12 — and while that’s great for many strains, we’ve chosen 11/13 for a specific reason: 🌒 Shortening the light period can help trigger earlier flowering and more aggressive hormonal shifts, particularly in sativa-dominant or haze genetics like these. 🌘 In nature, light hours gradually decrease, and this slightly shorter photoperiod mimics late-season sun, signaling to the plant that it’s time to reproduce. In our experience, this encourages a quicker transition into flower, sometimes with denser stacking and better resin development down the line. The trade-off? Slightly less daily photosynthesis, but with the right lighting power and nutrition, it more than balances out. ⸻ Nutrient Shift – From Start to Top As we flip into flower, we’ve also transitioned our nutrient formula to support the shift in energy: • Removed: • Aptus Start Booster – previously used to support early-stage root development and vegetative vigor. • Introduced: • Aptus Top Booster – same application rate (0.25 ml/L), but designed to stimulate early flower development, improve transition timing, and lay the groundwork for bloom stacking. Why this change? Because the hormonal shift has begun. We’re no longer supporting root initiation, now we’re priming the plant for floral identity, helping her internal systems prepare for the stretch, calyx development, and bloom site stacking. Our base feed remains: • Regulator – 0.25 ml/L • CalMag Boost – 0.25 ml/L • All-in-One Liquid – 1 ml/L • Top Booster – 0.25 ml/L ⸻ Growth & Structure Update These girls are branching like mad, spreading their wings and showing incredible vegetative structure just before stretch kicks in. Both phenotypes are looking stunning: • Pheno #2 & Pheno #3 • ~55 cm in height • Both with 8+ nodes, symmetrical branching, and healthy internode spacing. • Deep green leaves, upright posture, and zero signs of stress or deficiency. We’re expecting these girls to stretch considerably in the coming weeks, and we’re ready for the ride. ⸻ Environmental Snapshot – The Summer Stretch Begins Despite high temps, the girls are thriving. Here’s a readout of current conditions: • PPFD: 760 µmol/m²/s – measured via TrolMaster MBS PAR sensor, ensuring accurate canopy-level intensity. • Temperature: 31°C • Humidity: 50% • VPD: 2.23 kPa – yes, on the high side, but manageable for the moment. • CO₂: 632 ppm We’re aware that VPD is a touch aggressive, and we’re standing by for the arrival of the new AC unit to bring that back into optimal range. Still, the girls are handling it like champions, no curl, no droop, just upward movement and new growth. ⸻ Lights & Control Ecosystem Our lighting and environmental control setup continues to perform beautifully: • ThinkGrow Model One LEDs • Future of Grow LEDs • TrolMaster Tent-X Controller – managing: • CO₂ • Temp & Humidity • PPFD • Device sync • Spider Farmer GGS Controller for extraction fans • Dual 6” exhaust systems with carbon filters • One 6” filtered intake • All airflow dynamically managed via AeroFan + Spider Farmer extraction, allowing clean in/out cycles, keeping the air fresh and responsive. This is a precision ecosystem, designed to respond, not just run. ⸻ Final Thoughts – Lifting Off This may be Week 1 Flower, but it’s really the moment of lift-off. The girls are still pre-flower, yes but this is the space where momentum builds, energy collects, and the transformation begins. We’re shifting from vegetative growth into reproductive focus — and if this week’s energy is any sign, we’re in for a glorious bloom phase. The Roller Coster Haze journey continues , and it’s gaining speed. Let’s grow together, – DD (DogDoctorOfficial) ⸻ 📲 Stay connected & join the ride: • Instagram: @DogDoctorOfficial • YouTube: DogDoctorOfficial Channel • GrowDiaries Journal: GrowDiaries Page ⸻ Powered by the Best – Gear & Genetics • Genetics – Zamnesia: https://www.zamnesia.com/ • LEDs – Future of Grow: https://www.futureofgrow.com/ • LEDs – ThinkGrow Model One: https://www.thinkgrowled.com/ • Environment – TrolMaster: https://www.trolmaster.eu/ • Extraction – Spider Farmer & AeroFan • Nutrition – Aptus Holland: https://aptus-holland.com/ • Substrate – PRO-MIX BX: https://www.pthorticulture.com/en-us/products/pro-mix-bx-mycorrhizae • Storage – Grove Bags: https://grovebags.com/ ⸻ 💚 Remember: Grow slow, grow smart, and grow with love. The best is just ahead — and we’re here for every phase of the bloom. We’ve got much more coming as we move through the grow cycles. Trust me, you won’t want to miss the next steps, let’s push the boundaries of indoor horticulture together! As always, this is shared for educational purposes, aiming to spread understanding and appreciation for this plant. Let’s celebrate it responsibly and continue to learn and grow together. With true love comes happiness. Always believe in yourself, and always do things expecting nothing and with an open heart. Be a giver, and the universe will give back in ways you could never imagine. 💚 Growers love to all 💚
Likes
92
Share
🌱 Week 1: The Journey Begins! 🌟 Hey Grow Fam! 🙌 We’re off to an epic start with our TrolMaster adventure, and I’m already feeling the love for the setup, the seeds, and the growth happening in the room! So, let’s dive right in and get into the details of this exciting week! 🌿 Germination Update: Our first Gorilla Melon seed from Fast Buds didn’t sprout, but no worries—round two was a success! 🦍🍈 The second seed has germinated and is looking full of potential. I’m throwing in a Sweet Seeds Papaya Zoap into the germination station too, so we’re keeping this exciting lineup going strong! Germination is such a key part of the journey, and having a healthy start is what it’s all about. 🔧 Room Build & TrolMaster Setup: The build is coming along beautifully, and I gotta say, the TrolMaster system is blowing my mind! Everything’s under control like magic 🎩✨, and the TM+ app? Wow, just wow. I mean, I can literally be in the bathroom and still keep an eye on the plants—check all the metrics, adjust settings, and fine-tune what I need, all from my phone! 😂💧 This level of control is next level. I’m loving how smooth and seamless it makes managing the room. The gear is just unreal, and seeing it all come together is truly something special. 🌱 Nutrition Talk: As for feeding, we’re starting light but smart! I’ve begun with 0.15ml of Regulator and 0.25ml of Startbooster per liter for now. I always believe in starting easy and ramping up as the plants develop. These early stages are crucial—balance is everything. For the time being, I feel this is more than enough to keep the babies happy and healthy. 🌿💧 The Regulator is working wonders in maintaining plant structure and health, while the Startbooster is fueling the early root and vegetative growth, laying down a solid foundation for the weeks to come. It’s about getting it right from the start—too much too early can be a killer. Keeping it steady with precision, that’s the goal! Big Shout-Outs: To the amazing team at @TrolMaster, @Fast_Buds, @Sweet_Seeds, @AptusHolland, and all the incredible sponsors—I’m beyond grateful for the support! 💚 And to my GrowDiaries fam and followers, you guys make this journey what it is—thank you for the love, and I’m so honored to have you along for this ride. 🙏 We’re just getting started, and I can’t wait to show you what’s next. Stay tuned for more updates, epic builds, gear reviews, and plenty of insight. Don’t forget to follow me on GrowDiaries, YouTube, and IG for exclusive content, and let’s make this grow the best one yet! 🌿🔥 Growers Love to All 💚💚💚 P.S.- A deep dive into the Full Spectrum Quantum Sensor (MBS-PAR): The Full Spectrum Quantum Sensor (MBS-PAR) is an essential tool for any serious grower looking to optimize their light environment. This sensor measures photosynthetically active radiation (PAR), which refers to the spectrum of light that plants actually use for photosynthesis—typically between 400 and 700 nanometers and more depending . What makes the MBS-PAR sensor special is its full spectrum capability, meaning it accurately detects not just visible light but also far-red and UV light—which are crucial for maximizing plant growth, development, and flowering. With this tool, I can monitor the exact intensity of light my plants are receiving, making sure they’re getting the optimal levels for every stage of growth. By using this sensor in my grow room, I’ll be able to ensure that the light distribution is uniform across the canopy. Plus, it allows me to fine-tune the light output from my ThinkGrow LED setup, ensuring my plants are thriving under the best conditions. Whether it’s increasing light during the vegetative phase or fine-tuning it for flowering, the MBS-PAR sensor helps me keep everything on point. And the best part? I can monitor it all through the TrolMaster app, ensuring I can make adjustments whenever needed—even if I’m not in the grow room! This level of precision means healthier plants, better yields, and maximum efficiency. It’s a game-changer for taking the guesswork out of lighting and getting closer to growing perfection! 🌱💡 Growers Love to All 💚💚💚
Likes
14
Share
Likes
4
Share
Week is going good aside from me accidently cutting off a stem on pheno 2. If I can properly save the cutting though I might have a chance at another female. Pheno 3 I'm hoping can make some comeback as I really want to flower the plant, its not dead by any means but the way its growing I just cant see it allowing itself to flower the top leaves were barely growing so I topped. Hopefully positive changes within the next week.
Likes
5
Share
@Bak2Blk
Follow
They're getting so big. I'm hoping this week I'll start to see some flowers starting to form. Gave them a ph'ed watering only today. I'll be giving them water with calmag on Wednesday. 7/27 - They're finally budding up. YIPEE! This is my best grow batch yet! GDP1 and BK are about 11 weeks old and GDP2 is about 9 weeks old.
Likes
7
Share
A couple amber tricks, buds are getting heavy and falling over 😯 starting my flush with flawless finish tomorrow and gonna harvest at the end of next week 😁 Had a friend do a pre harvest smoke test from a bud I cut off for him last week, he smoked it last night and said it is fire 🔥
Likes
Comments
Share
@Robom069
Follow
very big buds not so dense but still very good i guess left side acid dough right side black domina
Likes
24
Share
Day 7 from switch to 12/12, ladies are show first sign of flower and they are start to stretch! I had to put another scrog net to separate all branches and to sustain the future buds, still watering with simple compost the made of worm casting and kelp, I don’t measure ph or ppm cause I’m in living soil. Happy growing and I’ll see u next week✌️🍁
Likes
1
Share
@GorkedOut
Follow
Harvested on day 70 (start of week 10) Only 9.2 grams of bud. Fairly short dry time of 8 days. I dropped a nug on the carpet and thought (f*ck there goes half my harvest) 😅 All jokes aside this is a perfect plant for growers trying to be discreet. I didn't even LST or anything and it only grew to 14 inches tall. You will need a carbon filter as it is a loud strain.