Day 84 The Durban plants are actively growing foliage and reaching for the light, despite being bent. Every day after the lights go out, I bend their tops parallel to the floor (training). Sometimes the stems break slightly, but they are still flexible enough to recover. In 2-3 weeks, I plan to transplant them to a permanent location, where there will be 20-30 cm of space above the tops for ventilation. In the next cycle, I think four weeks of vegetation will be enough for ripening. At Gordem Delicatesies (GD), Brazilians have stretched in 20 weeks, sometimes faster. For me, this variety develops more slowly; I'm not chasing maximum speed. Meanwhile, the Jack Herer is ripening in the box above them. I'm waiting for a manicure table (thanks to Mila for the tip!). As soon as it arrives, I'll start harvesting. I'm glad that with this device I can meet the deadlines precisely. Day 87 They hit a lamp and set one top on fire. The others miraculously survived. Today I tied the plants to their pots again with wire. I bent them so they were 10-15 cm from the lamp. Some were tighter. I cut out a 5-liter bag containing the lower branches, which were turning yellow from lack of light, and the leaves the plant had shed on its own. Watering was light but regular. I watered 3 liters by hand on top of the automatic watering. I added 1.5 liters of Simplex Taste and 1.5 liters of Simplex Aroma Punch. I started adding Simplex SilliX again—organic silicon is needed to strengthen the stems. Right now they look rather stiff; they bend easily by hand. This is a plus in my situation, but in a couple of weeks I want to see stronger, more vigorous central colas in the box. Mold was appearing on the dry leaves at the bottom that I didn't remove in time. I took out all the bushes and carefully removed all the dry and yellow leaves. I chose the ones that came off without effort. Their plant has already finished growing. After this procedure, the fan was able to blow air through the base, meaning less mold. Young buds are ripening on both plants, about 1 cm in diameter. The upper leaves and flowers are healthy; they were eating the lower burdock leaves. It's interesting to watch the biofertilizer from Greens work. I'll add Simplex Mass and Simplex Power separately in the next few days. And after that, HB-101. I'll water with Fitosporin at least once. I also want to add "33 Bogatyrs" bacteria – @NBRZ recommended it. Once a week, I manually pour a liter of solution with Simplex Taste (very similar to horse manure from the garden) and Simplex Aroma Punch – a potassium-sulfur additive to enhance aroma and flavor.

Week 3 of flowering is in the books for the Auto Gelato girl from Fast Buds Genetics <3 ... this week I did some minor cleanup with dying leaves, and the lower branches that were being blocked out by the top colas. This girl has recovered exceptionally well after being supercropped the previous week, so excited to see how she'll continue to grow and stack up in the coming weeks! Considering I snapped the stalk while cropping, I was really surprised to see just how well the wound healed up over the week. These plants are awesome! Anyway, be sure to check back next week for more updates! Happy growing 💪

The beautiful purple color becomes more and more intense. The growth is still slow but the buds are slowly swelling. Day 56 Photoshooting

It was a wonderful journey, I really had the honor of doing this girl many times, this time even close to the Monster Zkittlez with which they generated the Runtz who was also in the grow. Super modern family situation, I wanted to try to figure out which one I liked best, and I still haven't been able to. at least I'm still tasting Runtz's first flowers and it's heavenly but the freshly picked Gelato and the upcoming Zkittlez are scary just to see them. Super resin, it really looks fake, I also have some macro photos that will make you cry. The resin is everywhere the trichomes are even in the largest leaves the scent is of the garden of eden. wow. Show. Really nice. It was freshly cleaned I want to try to do the resin the first time and then I have freshly cleaned and hung the whole girl upside down under the crop data next week when I clean and can give the detail. Gorgeous. Before being collected, she did two music therapy days, one of which in the dark with frequencies for plants and together we listened: 1 - Paolo Conte - "Gelato" al Limon 2 - Raekwon - Ice Cream to stay on the "Geato" theme and then all the M83 discography to be collected with the very famous Outro of Interstellar really seems to pass to a better life listening to that stuff. Top of the top

✂️ Harvest – Flowering Week 12 | Day 78 (17 weeks total) Strawberry AK – Harvest Summary Harvest took place today, marking 17 weeks from germination. ⚖️ Wet Weight Strawberry AK: 1240 g 🌿 Final Impression The Strawberry AK delivered a strong final result. Buds appear dense, well-formed, and heavily frosted, with an overall solid finish to the run. 🧠 Post-Harvest The plant is now hanging to dry, and final results will be determined after trimming and dry weight assessment. Overall, a long run, but a successful outcome. 💪🌿

Subimos la temperatura de la sala y vaya si se noto, las plantas crecieron más en 2 semanas que en un mes, una pena no haber podido aclimatar antes la sala

This week I defoliated. Waited three weeks into flowering, to not stress them like I did last grow. She is rewarding me with some fat bud growth at many sites. I overwatered beginning of this week, but hey seemed to have taken it well. I did another amendment. The first one last week was a test, to see how they responded, they took it well. Just compare last week to this one. The amendment I did: - 5 liters of worm castings - 2 cups bonemeal - 1 cup wood ash - 1 cup microlife I layered this on top of my pots, covering this with bio-coco (pre fertilized) to ward of gnats. The gnats have been getting less and less. They don't like the coco that much, while humidity is just the same and last week higher since I did some more watering. I watered with the perma tea. While this is pretty acidic (PH 5), I can amend with more wood-ash, if you don't and follow this recipe, don't do too much wood-ash since it will kill off your micro organisms. I lowered the light diagonally since the outer right plant is longer and closer to it. The SP 3000 is still performing as you can see. Temps were a bit higher with the lights so low, so far the Orange Hill Special doesn't seem to mind. Im totally amazed with the results so far. Look for the great end of year deals at www.mars-hydro.com. Thank you for checking in on me again! Hug Bud

same as last week nothing to special just growing healthy on her bat poo feed coming up nicely I think other people might see differently but that's small grow space C4Matic and friends .

Hi Growmies, So far she is developing very nicely. Had someone from the community suggest plant success orca and Rezin to me, sp these were added for the next weeks feed to prepare the pre flower. The roots have started to nest themselves right above the airstone. As of now I think I’ll give her two more weeks and then flip her, as she is stretching a bit slower than I thought she would. Thank you all for passing by and see you next week.

Привет друзья. Наше знакомство продолжается с новым фотоцветущим растением от Smail_Seeds сорт ORIGINAL CHEMZKITTLEZ F1 reg. Сегодня растению 92 дня. Шишки наливаются уже тяжело ей стоять) Перевёл на 12/12 1.10.2023 Растение очень хорошо развивается, ни каких сбоев в генетике не наблюдается😀 Сорт выводим сами. Смотри мой профиль, у нас всегда есть что то интересное. Не забудь поставить лайк❤️, если понравилась как прошла неделя И читайте наш TELEGRAM: https://t.me/smail_seeds #Smail_Seeds 😀

Nothing too wild happened this week. I trimmed her up a bit today before taking pictures, she’s looking good. Doesn’t seem like much is really going on with the plant, but the buds do seem to be getting bigger. While trimming today, I think I found a spider in the leaves I removed. Should I be worried about this? It’s either eating insects or it’s just in there right? Hopefully there are no bugs for this thing to eat. 4 more weeks of flower. Wednesday update: Had an issue. Seems my timers stopped working. Light and filters/fans. Not sure when it happened, but I've reset lights to the normal time setting. Hope this doesn't affect her

Dos Si Dos # 33 ready for drying in the jar, honest weight (53,5g) seeing the structure which was very small I would have expected something less.. but I am very satisfied. the quality of this weed is absolutely at the top, the taste is very well defined.. when smoked it makes your nose tingle,flavor it is mainly pure lemon with a hint of mint in it. even the strong smell induces an entire room in a few seconds without even smoking it yet. I also collected a 0.4g of scissor hash which turned out very well. it is my favorite in this crop because it surprised me in everything both for its unique terpene profile and for its yield that I never expected given its size compared to wedding cakes. the total weight therefore of all three plants is (135.5g) and a total trim of (44.9g) that according to the calculations even of these crops I reached (1g/watt) precisely. (And im not a pro) I am certainly satisfied with that. 🙌🏻💚

Just flushing the girls this week, waiting for most trichomes to go cloudy instead of clear. Ive now switched the lights off for 36/48 hours and will harvest in the next couple of days :))

11/22 Day 31 from flip. Today is the first day that I took a tape measure from the lights to the topmost part of the canopy and I haven’t seen a change. I’ll check again tomorrow but I’m really hoping the stretch is finally done. I still have about 10 inches of space between the lights and canopy so I think I’ll be ok with that. I took the chance to do what is hopefully a near final defoliation of a few leaves and some smaller sucker branches that won’t amount to much. Everything still looks super healthy, no red anywhere on any stems and no discoloration on the leaves. Everything is spot on. Light adjusted to 840 PAR / 36.3 DLI. 11/25 Day 34 from flip. I made some adjustments to my nute mix to be more firmly at 1.3 EC, which means I’ve added some additional nutes into the mix. I also tested runoff EC and discovered things were spiking a bit more than I’d like. So I mixed up a few batches of my new mix and I’ve been feeding every few hours to flush things out a little bit. I’ve brought it down from 1.9 to 1.5 so far after this. I may finally need to break down and set up some timers to feed multiple times throughout the day. Obviously once a day is not getting done right now. 11/26 Day 35 from flip. I finally got the timer hooked up to my pump to begin automatic watering. For now, I have it set to water at noon for a minute when the lights come on, a 2 minute pause to let that settle, and then 30 seconds more to make sure both are fully saturated. The second fertigation event will be at 6:00 for 45 seconds, and then right before lights off another 45 seconds. I’ll have to keep an eye on it to see if I need to adjust any more for now. I haven’t adjusted the lights since last time, but the latest reading is 885 PAR / 38.2 DLI at the highest point of the canopy. It’ll stay there for now.

Happy with her,she's branching out slowly but surely.She's a happy girl,switched over to flowering.Carrying on with lst

2/9 NL: slow going, but going. 2/11 NL: few more weeks? Gave pH balanced water today. Pistels seems to be darkening, which is encouraging. Going to check trichomes this weekend... Hopefully mostly cloudy at this point!

Week 9 - First Week of Flowering 🌸 The dark period has ended, and these ladies came back into the light fully energized and ready for action! It’s just the first week of flower, and they’re all praying, stretching, and absolutely thriving—filling up every inch of the tent. This grow space is officially packed from wall to wall, with each plant competing for its share of light and showing off some of the biggest, healthiest leaves I’ve seen yet! 🌱 A few strategic plucks here and there have kept airflow smooth and light penetration balanced. Those big leaves? They’re a sign of happy, healthy growth. Large leaves help the plant capture maximum light energy, essential during this stage, especially as they start focusing on developing those flowers. When plants grow huge, vibrant leaves like these, it means they’re well-nourished and content in their environment—a true testament to the well-balanced conditions we’ve got going in the tent! Flowering Parameters 🌡️ Room Environment: • Temperature: 26.7°C • Humidity: 63.3% • CO2: 960 ppm • VPD: 1.29 kPa (prime zone for flowering health!) Lighting: • Light Intensity: 835 PPFD (ideal for boosting flower growth) • Solution: pH 5.96, TDS 460 ppm, temp 21.1°C • Medium: Moisture: 100%, TDS: 520 ppm, Temp: 21.6°C Carbon Filter Installation & Smell Management 🌬️🌱 With the transition to flower, the scent profile is already starting to kick in—crazy for the first week, right? 🌸 To keep everything fresh and under wraps, I’ve set up a carbon filter system. Here’s how it’s working: I’ve connected the filter to my Aerofan, which pulls air directly from the tent. This air is cleaned by the filter and released into the main room, where it then passes through another filter before exiting my space. This dual-filter setup means no scent escapes into the wild, keeping things stealthy and the grow room a peaceful, scent-contained environment. Perfect for anyone concerned about keeping their home free from that telltale aroma! 🕶️🌬️ Enhanced Lighting with Emerson Effect 🌞 This week, I’ve introduced an extra 15 minutes of red light at the beginning and end of each light cycle. Why? Well, this red boost taps into the Emerson effect, enhancing photosynthesis efficiency, especially during the flowering stage. By stimulating a little extra wake-up and wind-down light, we’re mimicking the natural sunrise and sunset experience for these plants, which can help reduce flowering time. Not only does it encourage smoother transitions into day and night, but in theory, it’ll help these ladies finish a bit faster, while giving them a little nudge to build more substantial, quality flowers. 🌇 Nutrient Adjustments 🌱 Now that we’re in flower, I’ve swapped out the Start Booster for P-Boost and TopBooster to specifically support flowering needs. Here’s why: • P-Boost brings in additional phosphorus, vital for energy transfer and cell division as the plant channels more resources into budding sites. • TopBooster supports the flowering phase by improving flower quality and density, helping to build those big, aromatic buds we’re after. These changes bring the nutrient mix in line with what’s most beneficial at this stage. All this precise dialing in is easy to manage thanks to the TrolMaster system. From pH to nutrient scheduling, the TrolMaster ecosystem and ThinkGrow LEDs have been the ultimate teammates in this grow journey, giving me real-time data, fine control, and peace of mind. 💯 (Not introducing UV light just yet, but stay tuned as that’s coming soon for an added boost!) Looking Forward 🌟 Next week, we’ll be upping the reds, giving us an even greater chance of activating those flowering signals for a smoother, faster transition through the cycle. I’ll keep tweaking and fine-tuning every parameter to make sure these ladies get exactly what they need to thrive. Big thanks to the TrolMaster system for keeping everything in balance and optimized, along with the supportive Grow Fam following this journey! Your enthusiasm, advice, and support are a huge part of this grow’s success. Keep following for more updates, and stay tuned for what’s next! 🌿✨ P.S. Deep Dive: TrolMaster’s MBS-S8 CO₂ Sensor & Smoke Detector 🚨 The MBS-S8 CO₂ Sensor from TrolMaster is a powerhouse for growers, especially when it comes to optimizing plant growth and efficiency in a controlled environment. This sensor continuously monitors CO₂ levels and integrates directly with the TrolMaster ecosystem, giving you real-time data on CO₂ concentration. Ideal levels of CO₂ can significantly boost growth and yield during certain stages, so understanding and managing CO₂ is key. With the MBS-S8, I can control CO₂ levels precisely, keeping them within the optimal range for photosynthesis. This sensor is a game-changer because it adjusts CO₂ delivery automatically, giving plants exactly what they need without any extra monitoring from me. Meanwhile, TrolMaster’s Smoke Detector is an essential safety device, especially in spaces with electrical equipment, lights, and heat-generating components. This detector can be set up to alert me instantly via the TrolMaster app if any smoke is detected, allowing me to respond immediately to any potential issues. Fires and smoke are rare in controlled grow setups but having this safety measure provides peace of mind and lets me focus on the plants without constant worry. It’s an incredible tool for any grower prioritizing safety and proactive monitoring. Discount Codes so you can save big on your next check out 💚💚💚 Kannabia - DOGDOCTOR 30% off SeedsmanSeeds - DOGDOCTOR 10% off CannaKan- DOGDOCTOR 15% off terpyz.eu - DOCTOR 15% off The Neutralizer - PORKIT5-DOG 15% off As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and so joyful with you all in my life 🙏
 With true love comes happiness 💚🙏 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so 💚 Friendly reminder all you see here is pure research and for educational purposes only Growers Love to you all 💚💚💚