Not much to report pretty straightforward process. Every 3 days top off with 33% strength to keep ppm up. I tried going lower on the ppms but they just didn't like it. These girls are definitely heavy feeders. I don't plan on doing a res change until absolutely necessary. Save money on fertilizer

More later after drying!

So I didn’t know about Grow Diaries when I started this, and do I am jumping in first day of second week. I know for a fact that she has been slowly picking up some vegetative growth over the past week. Before that I would say it was between 1-2 weeks to get her rooted out. She has been inside the tent still, but will be transplanted outside in a fabric pot with a whopping 100 Gallons of custom made soil. I am still new and learning. I started mother from seed and will be using her to make more seeds(rev-fem). It is possible I may be obsessed 😍. Either way it is also my very first successful clone, which I literally took ONE cutting at about 10” long off the main trunk towards the bottom, then I took off an additional 4”. I guess I was confident? Even though last year, or year before that when I tried a lot of cuttings from a completely different plant, they all failed miserably. I knew why. I just needed to be way more on top of my game with the cuttings. Anyways, this one here means a lot to me because it’s my first clone! Let’s hope I don’t love ❤️ (water) it to death ☠️!!! lol

Aplicamos recientemente jabón potásico por problemas con trips... estamos controlando todo a tiempo, en 3 semanas ya pasaremos al armario grande para continuar dándole crescimiento para las nenas farmers!🍁

So far my confidence in this next go around is very high! 😃☀️ Putting the seeds straight into a jiffy pellet is the way I am going to proceed with germination going forward. You are just adding extra variables to what should be a simple equation (seed in sterile medium + warmth + moisture = seedling) unlike with the paper towel method, where you need to transfer them to the medium. But this is just one opinion of a rookie grower.

Fast Buds RF3 Mixed Pack Is coming along quickly. The buds are thick and getting lots of color I’m still not sure of the varieties but they all look tasty and smell great. I’m changing the water supply to flush today. The next post might be the harvest.

After 5 & 1/2 - 6 days, the girls were trimmed up and “jarred” as I could not go any longer without risking over drying and messing up the cure. Loved growing this strain, MOP 1 having a more deeper smell leaning more to mimosa and citrus & MOP 2 smells more like candy sweet smell leaning more towards orange punch. Pulled 14oz total from 2 girls. 7oz per girl, but MOP1 had the more favourable bud structure, while MOP 2 had the more favourable colour and sweeter smell. Neither girls I would say had any real popcorn buds, even the smallest of the buds lower down were really dense and will only improve a little more with a cure. Love the Gavita for the density 100%. All of the buds are now currently in a plastic airtight bucket ( I know use glass, I don’t have any jars and it’s my only option.) Bucket will be burped a couple times a day to cure and allow the smell to develop some more. I’m sure I will lose a little weight as the cure progresses, but in total as far as placing buds in the bucket the grand total is 14.1 oz. probably around 13.5 oz when all is said and done I’m guessing. I am beyond happy! Thanks for everyone’s help and support on here too! 🤙🏻💚

Always R.O water

Ich habe die Fotos vom ICERINK mit denen vom MANDARINCOKIE gemischt, da es mir nicht gelingt, die Fotos vom ICERINK hochzuladen.

😇

A lot going on this week!! Feeding 3 quarts every Sunday and Wednesday at this point. I did a light defoliation on Monday and did a more thorough defoliation on Friday! I opened up a lot of bud sights and it shows in the pics from late in the week!! I just turned the fan and carbon filter on. Temps are currently holding at 73-74F and the humidity is between 43-45%. I'm very happy with that! I hope to keep them both happy!! Enjoy!

Hello everyone 😎 Week 5 of flower for the strawberry banana auto from Fast Buds 🍓🍌 She grew fast with beautiful green color,for the nutrient 4ml/L terra bloom & 1ml/L power buds next week i will introduce Green sensation at very low doses from Plagron ✔️ Mars hydro SP-6500 70% Have a nice day 😋

Still trying to spread theses girls. Keep peacefully defoliate every day to keep air moving. Some night was 5c this week so they will probably turn more purple in the next fews weeks. Any recommandation ?

Finally I begin grow report of strain Gorilla Girl from Sweet Seeds, Thanks you Sweet Seeds)))😘 The last time the plants blew away wind, and rip.😇 I love cookies, Gorilla girl is a sativa dominant hybrid of the legendary Gorilla Glue X Girl Scout Cookies. Vegetation: will be in the outdoor for 35-40 days for natural light, Flowering: in Indoor with 600w HID lamp, Nutrients: from GHE, and Advanced Nutrients . Pot Size: 4Gal - soil/perlite 50/50. Gorilla Girl : This strain is the resulting hybrid from the cross between two of the most famous and powerful genetics coming from the USA: Gorilla Glue X Girl Scout Cookies. The GSC specimen used for this cross comes from the phenotype known as “Thin Mint”. An Indica-Sativa hybrid with Sativa predominance. Gorilla Girl®️ is a strain with a very powerful effect, featuring very high THC levels that can reach to between 20% and 25% in optimum growing conditions. Some specimens can even exceed these levels. The resin production of this strain is copious, covering all the flower calyxes with aromatic trichomes. The buds are very resinous and compact. Gorilla Girl®️ features intense taste and aroma, with cypress tones and a touch of wood, complemented with hints of earth and citrus. The plants look like balanced Indica-Sativa hybrids, very productive and vigorous, with long and flexible side branches. Indica/Sativa 40% / 60% THC 19-25% CBD 0,1% Indoor Yield 400-550 g/m2 Outdoor Yield 350-600 g/plant Indoor Blooming 9 weeks Outdoor Harvest late September Sex Feminized Effects Psychoactive, Euphoria, Stimulating, Creativity, Happiness Flavor Cypress, CITRIC, Earthy, Woody

Harvest done 250g

Hey now, hope everyone is having a great weekend and staying safe. Another great week for the ladies, as they are now about 3 weeks into flower, and the stretch has just finished. I am still feeding them silica, cal mag, and flower nutrients maxi bloom by GHE. I did start to add a PK booster this week pushing the EC up to 1.4. I also will be switched the light from V1 to the F1 Spectrum at the beginning of this week, and will be integrating the UV/IR bar into the light cycle later this week. I will run the UV/IR bar for approximately 30 minutes prior to lights off to get started. The tallest plants are the Sundae Driver and the Durban Nights at 42" and the Red Hot Cookies is the shortest plant at 38" however they all look happy and healthy and capable of easily giving up a half pound each. The 5X5 is really starting to fill up nicely, I am running two dehumidifiers outside of the tent and I am able to maintain around 50% RH in the tent during lights on, and around 55% RH with lights off. We did get an unexpected heat wave this weekend and it has been a struggle keeping the heat and humidity down but the flowers are just starting so no need to worry about mold or anything like that yet. As soon as this heat wave is over the temps should be good to go the rest of the way this is by far the best time of year to be flowering plants in my region. I did defoliate twice this week and I may do one or two more rounds before just letting them do their thing. Not much to do from here on out except make sure the reservoir is full and the PH is in the proper range. I hope everyone has a great weekend, Thanks for stopping by, Stay Safe and Blaze On!!! 💪 Website: https://medicgrow.com/ https://growdiaries.com/grower/medicgrowled

Day 28 - Full watering/feed to run-off 10%-20% at same strength as previous. (50% of maker recommended strength for coco use + cmx + root enhancer + kept extract organic additive) Day 31 - Decided lower lights by around 30cm 120cm to about 90cm. After about 8 hours the plants all suddenty wilted. They stay wilted through the night cycle as well, so I raised the lights back to where they were and they have bounced back, so I won't suddenly drop the lights by as much. If I do lower them it will be incremental. Day 32 - Bought a six fin 800w oil heater for the tent. Am going to place this under the oscillating fan and set it aiming to keep the tent around the 25-27c range. Hopefully this has the tent sorted for the rest of the grow. The humidity has been high lately due to the weather, so this might be about the only factor left to address, and I will look at getting a dehumidifier for the grow room if needed. Day 33 - Full watering to run-off 10%-20% at same strength as previous. (50% of maker recommended strength for coco use + cmx + root enhancer + kept extract organic additive) - Ordered humidity controller for extractor fan. - Ordered Temperature controller for Heater - Ordered IP Camera for remote monitoring Tent is now running fully sealed and using passive inlet and carbon filtered extraction to roof space. Plants are around 20-40cm high and the lights are 85cm above the canopy on full 480w. Day 33 - I have reduced the Light intensity from 480w to 420w. This seemed to really get a good response from the plants. I think as they've grown taller and the light intensity has quietly increased at the newly heightened canopy level the plants have been getting stressed. Day 34 - I've reduced then light intensity from 420w to 280w. I am new to the quantum boards and the concept of "too much light" so working out how much intensity, how much distance and so forth for the different stages of plants growth. I have a gut feeling 280w at 80cm might be a touch under-powered but I'll give it a full light-cycle or two to judge leaf growth and colour and make a call on whether or not to increase it or leave it as is. Day 35 - I found plants wilting during hthe night cycle without fan air circulation. So I've set the oscillating fan to run during night hours. Day 35 - I've turned up the heater a touch to bring the tent temp to around 26c. Infrared gun shows leaf temps to be around 24-25c which ideally I want to get to 27-29c - I'll aim for this metric once the other environmental factors are sorted (ventilation seems sorted so mainly just dialing in the light intensity). * I'm looking forward to setting up the heater on temperature controller, and putting the carbon filter ventilation on humidity control, and then mounting an IP camera in the tent. This should all be here in around 2 weeks. I'm looking forward to being able to view the temp/humidity and see the plants live without having to actually open the grow room. * The infrared temp gun is proving invaluable in testing leaf, coco and pot temperatures around the tent, which is giving a great view of how the heat from the heater/fan arrangement is being distributed - it shows a less than 1-2c degree variance across the tent which is just great. * Hopefully week 6 to come will be one with a lot less wilting incidents and the week that this tent achieves a somewhat final and stable environment optimised for plant growth and happiness. But so far every time I think I've got things perfected, another variable comes into play and I need to tweak something. Maybe by the end of this harvest I will have the whole process refined to a smoother less reactionary process.

looking good and healthy.