Check the winners The Grow Awards 2026 🏆
Likes
Comments
Share
@Algar
Follow
Wanted to keep her growing until the end of the month but, mother nature had other plans. Woke up this morning and the buds where almost touching the ground. Still have 1/2 the plant left, will cut fown later today if more rain. Don’t have room to cure all at one time. Normally I cure outside, for now they’re in my bathroom and dressing room.😬Don’t know the wet weight for now since only cut 1/2 of the plant, but probably a good 4 or more kilos!😳 Finally, the sun has returned. Not hot though, but nice and sunny. Moved curing to outside for now. Last night we stayed high just from the aroma in the house. More to come when she dries.😍 Last plant totalled 2,005grams. 3 plant total 3,340 grams 😎
Likes
2
Share
@Ninjabuds
Follow
Skunk apple runtz I'm probably only going to keep 1 of these guys seeing the 2nd just has really bad growth so far. I'm sad about this I made this cross out my last grow and was hoping for the better end of things. The other plants is decent but we will see I hope it has the growth pattern of the lit farms Rick bobby and the bud structure of the obama runtz I grew It's looking like a good start to a week the plants are strong they are getting to the point I can let the dried dry out completely. I'm thinking by the end of this week the plants will be starting to be sold. Last week I put all the plants into my bigger 2x4 tent with my medicgrow mini sun 2 the 500w version. Only a few of the plants were ready for that light. Seems like the only plants that really have good resistance and have a strong start are the weedseedsexpress.com seeds. Shout out to weedseedsexpress.com for the strong plants. I ended up putting all the plants back into my 2x2 tent with the 55w amazon light it has alot more blue light in its spectrum. It's kinda weird b4 I switched the plants to the 2x4 tent they were getting 220umol under my amazon 55w led then when I put them under the 500w light 25% strength about 50in from plants and they were getting only about 195umol in that tent but it was stressing most the plants. I assume a larger light has more side lighting hitting the plants. I think when useing larger lights it's good to measure umols from the top but also coming from the sides. I think durring seedling stage they only need about 50% the umols coming from the side the plants as the top is receiving. When I put the plants back in the small tent about the same umols as they were getting b4 the switch and they were still a little stressed. So for a few days I put the small light at the top the tent giving them 100umols for a few hrs then 130umols the rest the day.
Likes
13
Share
@Oldwied
Follow
Flower time is scrogging time. Over the week I increase the light Power slowly Light Power: 80% Day 54 Flower #4 Watered with SF nematodes Day 57 Flower #6 Photoshooting Tucking Day 58 Flower #7 Photoshooting
Likes
574
Share
@TOTEM
Follow
HARVEST DAY! 162 days after the sprout, and 117 days after the switch. It makes almost 6 months!! What a never-ending journey! I chopped down the princess and decided to place the colas on the usual hanging net without trimming them directly. I just couldn't. Every cola requires at least 30-40 mins to be trimmed properly. I got something like 50 or 60 colas in total. It's a total pain in the ass believe me!!! There are layers consisting in calyx, leaf, calyx, leaf, and so on. You basically need to work between every couple of small calyxes in order to remove the leaf in the middle, while being very careful to not cut down everything. It's insane!!!!!! So.... just wait a little more for the final harvest and the smoke report. They will come, but definitely not now! In the meantime I uploaded some harvest photos and videos. ;-) See you soon!!!
Likes
17
Share
@RakonGrow
Follow
**** HAARVEST ZOE **** Nice Strain , My little Zoe really made all the mistakes you could possibly make. No matter when I give light or want water or fertilizer. It grows and grows and grows, the main thing is that there is light. It was one of my free seeds from Zamnesia. So far all seeds have germinated. I store my seeds in a dark, airtight container at 6°C. Tastes kind of sweet after curing. Greenhouse Feeding is a really easy fertilizer to use. I used the BioEnhancer again and again. My little Zoe thanked me. The BioGrow was used as topdressing and is doing its job. The BioBloom also does its job at the right time. And that's really great and easy if you don't have an autoflower. Of course there is a corresponding product. But I was happy to get anything here at all. Legalization has wiped out the market. But for next time I have an appropriate soluble fertilizer for fast-flowering plants. It doesn't work for 8 weeks :)) I use a Sanlight Evo 3-60 1.5 with Bluetooth dimmer. There's nothing to complain about there. Set daily cycle via app. Helpful if the weather or environment is so bad that you have to regulate the light intensity. 33g after 5 days dry . 24.5 °C to 22°C with 50%-60% . curing in a vaccum box at 18°C . It looks like I'm drying too long. // It tastes a bit crunchy. Day 79: trim , slow vacuum box to cure 22°C and 61%rH . Day 76: videostuff: been drying for 4 days (res 640x480) ( optical zoom x200 - x250 ) Day 72: DLI usage total this Plant : 2236.6 DLI in 70 Days . wet trimmed, cut off, hung upside down. see you after 14 days Day 71: preparing for harvest . 24h long night session . DLI : 0 Day 70: - Sanlight DaylightCycle - + ON 200PPFD (00:00) - 800PPFD (03:30) - 800PPFD (16:30) - 200PPFD (18:00) OFF video and photo tryouts with the digimicro mobil x300 optical zoom , mostly freehand Day 69: - Sanlight DaylightCycle - + ON 200PPFD (00:00) - 1000PPFD (03:30) - 1000PPFD (14:30) - 200PPFD (18:00) OFF incredibly hot and rain. lost some terpene :)) Well, summer is coming, Day 68: - Sanlight DaylightCycle - + ON 200PPFD (00:00) - 600PPFD (00:30) - 800PPFD (03:30) - 800PPFD (14:30) - 600PPFD (17:30) - 200PPFD (18:00) OFF - Added 1L bottle of water It's hot, hot, hot, Zoe would like more water. changed daylight cycle so it match the weather problems. tent is open until my real night comes. 103 flowers (including popcorn) counted, due to an accident about 15 flowers are missing. Day 67: - Sanlight DaylightCycle - + ON 200PPFD (00:00) - 600PPFD (00:30) - 900PPFD (03:30) - 900PPFD (14:30) - 600PPFD (17:30) - 200PPFD (18:00) OFF - watering bottle water 1.75L weather to hot , changed daylight start time and daylight cycle so it match the weather problems. I'm lucky, buds are still growing :))) Day 66 (we are on the road with maximum sanlight ) - analyse some trichome . - make some Zoom Pics and Video stuff . - Sanlight DaylightCycle : - + ON 200PPFD (00:00) - 1000PPFD (00:30) - 1000PPFD (13:30) - 800PPFD (17:30) - 200PPFD (18:00) OFF - DLI will stress alot ... Anyway, it's too hot in my room... I open the tent and now everything is fine with the temperatures and I increase the Sanlight to 100% for the first time. May Zoe love it or leave it :)) We'll see what happens Day 65 : Sanlight DaylightCycle : ON 200PPFD (00:00) - 800PPFD (00:30) - 850PPFD (13:30) - 800PPFD (17:30) - 200PPFD (18:00) OFF It will soon be ready for harvest.
Likes
9
Share
📆 Semana 9: La Auto Pablo Escobar mantiene un ritmo estable en floración. Los cogollos siguen engordando y aumentando en densidad, con una producción de resina que no deja de sorprender. Los tricomas son mayoritariamente lechosos, aunque aún se observan muchos pistilos blancos, señal de que la planta todavía tiene margen para seguir desarrollándose. El aroma se vuelve más complejo y envolvente, con notas dulces y cítricas que se intensifican día a día. ¡Seguimos creciendo fuerte! 💪
Likes
2
Share
Growth kind of exploded in week 4. The LST and topping leads to major bush properties. I keep the plant in check by removing major leafs and metal hooks.
Likes
283
Share
FD57 - We're at the start of the ninth week of flower. Everything is just coasting along this late in flower, and there isn't much to do except check trichomes. I'm seeing less clear and more cloudy and amber, and I estimate that chop day is one, mayyyyyybe two weeks away. The RH is the tent has dropped somewhat to mid-high 50s. It is still higher than what I prefer at the end of flower but should hopefully be ok. I turned up the circulation fan to increase air movement and make it more difficult for botrytis to take root. D63 - End of the ninth week of flower and I'm debating whether to chop tomorrow or wait another week until I get home from a trip. Decisions, decisions...
Likes
8
Share
@pzwags420
Follow
Week 12 has started well. The flowers are still growing and the smell is still great :) I applied weekly nutrients on day 1 of week 12. On week 12 day 4 I added Z7 enzyme to my reservoir and I defoliated the girls to bring in more light to the lower canopy. On day 5 I decided to harvest two colas from Pheno 2. It seems to be finishing faster than the other phenos(mostly amber hairs although trichomes are not mature after closer inspection... I want to experience what effect I get from early harvest so to compare to later harvest. From now on I will leave the plants alone until they are all closer to harvest. 😅
Likes
174
Share
@DreamIT
Follow
😬😆UnCoNvEnTiOnAl GrOwTh 😆😬 ______________________________________________ 🦄 In the last few weeks, the updates have ceased to work due to work and little stay at home, but I am recovering the right pace, with a new format, customized for any eventuality. Here are the latest shots of this beauty, one week after the cut. That pink trichome excites me a lot 😆 ___________________________________________________________________________________________ ❓ Are you new to the world of the cultivation and don't know where to safely buy your seeds? 😮From SweetSeeds you can find award-winning, sweet, fast, fragrant, beautiful, and delicious genetics !!! ✅http: //bit.ly/SweetSeeds_ _________________________________________________________________ 👀 Are you looking for a good lamp to start with? 👀 🌞Viparspectra has something more than the others, take a look at their site. ✅ http://bit.ly/pro-seriesproductspro-series-p1500 ⏩ Use "GDVIP" for an extra discount or "DREAMIT" for an extra 5% discount 👀 Search for it on Amazon ✅http://bit.ly/ViparSpectraXS1000Amazon ⏩ Use the code - lt10gdvip - for an extra 10% discount 👀 Watch my ViparSpectra XS1000 unboxing on YouTube, leave a like and write to the channel 🦄 ✅http://bit.ly/UnboxingViparSpectraDreamIT ______________________________________________ 📷🥇 Follow the best photos on Instagram 🥇📷 https://www.instagram.com/dreamit420/ 🔻🔻Leave a comment with your opinions if you pass by here🔻🔻 🤟🦄💚 Thank you and enjoy the growth 💚🦄🤟 ___________________________________________
Likes
43
Share
Hi there! Thank you for checking out my Gorilla Glue Auto grow. The grow well other than around week 6 where I over did the feedings. She got a little burned but after some flushing I was able to get some of the excess water soluble nutrients out that was burning the plant. After the flushing she came back hard. She got solid and grew some fat buds coated with resin. Definitely a recommendable strain from Auto Seeds.
Likes
3
Share
@Nonem420
Follow
Day 77 I'm running out of vertical space for pinus contorta, this weekend i will open the box to move the leds higher and will try to do some decent photos. At this point i've added the Pinus purple matcha to the diary because she's huge and impossible to not notice, should be around 1,5m² almost 150cm tall. Had to do a very risky move and "soft crop" 2 apicals because of burn risk, too close to the leds. I wasn't expeting a freakin' tree like that! Day 79 Jeez plz stop growing in height!! After this shaky video i raised the leds 10 cm, now i'm for real out of space.. I'm adding 10 to 12 liters every day, alternating ro with only silica one day and the other with nutrients. Day 81 Way too much leaves in the lower part of the plants but i really don't want to stress them more than the temperature is already doing (29.3C measured in the upper canopy at 5 cm from the leds). Luckily i've got a lot of airflow, 3 filtered exhaust and 1 huge intake to remove almost the humidity. Despite it all they are pretty healty, no visible burning signs.
Likes
80
Share
~MERINGUE by DUTCH PASSION~ Well friends, here we go on another 'canna-venture' together! The grow room has had a complete remodel and some upgrades done to it including brand spanking new 4x8 and 4x4 tents and a Trolmaster Hydro X controller along with a new Control Panel. This strain by Dutch Passion is one of my all time favorite strains that I've cultivated previously with phenomenal results so I'm looking forward to seeing what this girl has to offer when she's grown to her full potential! I'm going to things a bit different this time around. I have a brand spanking new AC Infinity 4x4 tent and was just given one of HLG's newest lights for 2022, The Blackbird! I've got this 600w monster hooked up to my Trolmaster Hydro X Controller so I've got full control over timing, dimming and Sunrise/Sunset. This beauty is going to annihilate the 4x4 for sure! 😎👍 I'm going to grow her all by herself and veg her for around 70-90 days after witch I'll install a trellis net in the tent and spread her out. Once she's recovered from her 'net training' I'll flip her to 12/12 and hang on! 🤪 It's ALWAYS been a blast for me growing strains from Dutch Passion because their genetics are extremely stable which allow me to just concentrate on the essentials: Light, Environment, Water, Nutrients and possibly a bit of LST... not complicated, just basics like keeping a constant temperature and RH in the tent at a level that gives a good VPD, watering when almost dry and maintaining proper light levels according to their stage of growth and they REWARD you with some of the most EPIC cultivars you've ever grown! 👍👍👍 ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ ~STRAIN INFORMATION**~ ~Unique USA genetics~ ~Very sweet aroma and fruity flavors~ ~Compact buds with one of the highest THC levels~ ~Quality of the flowers is top-notch with an amazing bag appeal~ Meringue has a very sweet aroma and fruity flavor Meringue is a hybrid indica/sativa strain with a complex fruity aroma that leans to the tangy side of the spectrum but a bit sweeter. It smells like oranges, mango and honey with some earthy, sour hints. Her aroma profile is also very pungent. Meringue is a connoisseur’s delight Meringue is a high-quality strain. She might not be the biggest overall yielder but the level of quality is definitely a reason to keep growing her again and again. Expect solid yields of stunning looking buds. Although the flowers can be a bit smaller, they are rock-hard and thus will still put down some weight on the scale. When handled well she will deliver you some of the most beautiful looking nuggets on the planet. The dark hues in the flowers and leaves makes the white layer of resin really pop out for an eye-catching bag appeal. Meringue is grown by crossing Wedding Cake x Animal Cookies. Wedding Cake, also known as Pink Cookies, is a USA cross of the famous Girl Scout Cookies and Cherry Pie. These 2 strains make for the intense sweet tangy taste of the variety. It is also noted for its extremely high THC content. Animal Cookies is another popular USA variety which is a child of the legendary GSC line and Fire OG. She is a clone-only variety that flowers in about 9 week and grows very dense and compact buds that can show some dark coloration in the flowers. This strain has a sweet and sour aroma with a strong body-effect that will suit the more experienced smoker. -The genetics used to create Meringue ensure the following characteristics- ~A sweet tangy aroma from the Wedding Cake ~The dense, compact and colored buds from the Animal Cookies ~High potency levels thanks to both the Wedding Cake and Animal Cookies genetics Meringue is top-notch variety with a high cannabinoid profile and an intensely sweet, pungent aroma. ~Meringue Effects~ Meringue is a crossing of 2 popular hybrid USA strains. She leans a bit more to the Indica side which is shown in the shorter flowering time and bud structure. The effect of the variety is quite euphoric with a powerful sense of well being and relaxation. When you smoke more during a short period of time you will be rewarded with a deep body stone which could give a couch-lock experience. Meringue feminized seeds vs Lemon Meringue strain Any fans of the USA Lemon Meringue variety will love the Dutch Passion Meringue. Both varieties share a THC rich high and a connoisseur flavor profile. However feminized seeds of the Dutch Passion Meringue are thought to produce frostier plants and a superior vaping experience. -The growth and flowering time of Meringue- We recommend a veg period of about 4-6 weeks for these feminized seeds. Meringue can have a bit of a slow start while showing some stretch during the latter part of the grow period. On the other hand, she doesn’t stretch a lot during flowering, so she can be a bit challenging to understand. Meringue can have quite an unusual growth pattern with leaves that have elongated stems and which are pointed upwards with some distance to the main stem. This requires the use of certain growing techniques, like leaf tucking, to make sure she receives sufficient light from top to bottom. Meringue stays fairly compact and within 3-4 weeks there is already a lot of resin on the flowers. After 6 weeks of flowering the buds start to show orange pistils, they seem to ripen quite fast. Luckily all plants show amazing resin production, making them very appealing to the eye. The flowering time is about 8 weeks. In combination with the recommended veg phase, it will take around 12-14 weeks from cannabis seed to harvest. The yield of the Meringue Meringue produces XL harvests of top-notch quality cannabis; between 400 and 500 grams per m2 is possible. The buds are really frosty and dense. Our expert advice: Meringue is the perfect strain for professional home growers or licensed producers looking for a variety with the highest possible resin levels. Buds are literally coated in layers of resin. We would recommend to look out for the plants which show the most hybrid leaf and plant structure. These are generally the biggest and best yielding phenotypes. Consider using a UV light during the last few weeks of flowering and notice how the trichome production goes into overdrive. If you’re looking for something truly unique with an amazing bag appeal then please look no further, Meringue is the strain you need! ~More info about Meringue Meringue isn’t the most straightforward plant to grow so she can be a bit challenging to understand. The thing that stands out the most is the slightly unusual growth pattern, therefore more leaf picking is necessary, otherwise the lower buds will not receive enough light. Because of the slightly larger internodal distance, buds don’t have the tendency to become really big, which could make her a bit more interesting for growers with higher humidity levels. There should be enough fresh air around these flowers though, because they become rock-hard. Buds are covered in trichomes, lab results showed all phenotypes were close to and above 20% THC, suited for hardcore smokers. ** Credit to Dutch Passion ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ ~THE SETUP~ ~Initially seed was lightly scuffed, then soaked for 3 hours in 78℉ distilled water after which it was transferred to a moist paper towel laid out in a Jiffy Pellet plastic starter tray with lid. Underneath the tray was placed a Mars Hydro Heat Mat with Controller that was set to 78℉ where it stayed until a tap root emerged. ~Planted into Jiffy Peat Pellet that was hydrated with distilled water warmed to 78℉ with a 7.0 ph. ~Once roots emerged from the Jiffy Pellet she was transferred to a 1qt plastic pot. As she grows I'll be moving her into larger pots along the way up until she's in her 10g fabric pot. ~Grown in a 10g fabric pot filled with Mother Earth 70/30 Coco/Perlite medium and fed Dutch Pro nutrients throughout the entire grow with de-chlorinated water ph'd @ 6.2-6.8. ~19/5 light cycle for vegetation, then 12/12 to flower with supplemental UVA added during the last weeks of flower. Lights are controlled by a Trolmaster Hydro X controller set for a 15min Sunrise/Sunset simulation. ~ Supplemental co2 provided throughout vegetation and flower - monitored and controlled by an AutoPilot APC8200 co2 controller. ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ Weekly Updates: 12/1- I soaked the seed for 3 hours in 78℉ distilled water after which it was transferred to a moist paper towel laid out in a Jiffy Pellet plastic starter tray with lid. Underneath the tray was placed a Vivosun Heat Mat with Controller that was set to 78℉. After 30 hours she had not popped open yet so I soaked another seed for 3 hours and then into a paper towel and onto the heat mat it went. 12/3- This afternoon I checked and the seed had a root that was about 1/4 to 3/8" so at 5 pm I transferred it into a Jiffy Peat Pellet that was hydrated with distilled water warmed to 78℉ with a 7.0 ph using a tine off of a plastic fork as a 'mini trowel' to make a hole in the pellet and to gently cover the tap root, leaving only the seed head slightly exposed. This method accomplishes most of the initial work the seed has to do by eliminating having to orientate itself, push it's root down and head up. By the next morning she had her cotyledon leaves opened! 12/5- Well this is Day ONE for the Dutch Passion Meringue! I'll keep her in the covered/heated Jiffy tray until I see her roots beginning to emerge from the peat pellet, then I'll transfer her gently into her 2qt plastic starter pot to begin growing. 12/7- Today when I checked her, she had roots just starting to emerge from her pellet, so tomorrow I'll transfer her into her 'starter' pot. 😎💚 Thank you for checking out my passion in life! Please visit as often as you wish and I hope you enjoy this journey as much as I know I will! Grow Strong! 💪😎🤙
Likes
16
Share
@Weed_nerd
Follow
grows well very dense good response to lst training.have cut it out a bit this week it was very dense. I have also tied out branches a little longer and also moved it down 5 cm from the lamp because it showed signs of being too close now she feels better and grows on
Likes
60
Share
Buds getting bigger. This strain is very greasy, a lot of resin. It smells very sweet, amazing.
Likes
3
Share
La banana beach atrasada se transplanto a macetero de 20lt RIEGO AGUA+MEGABUD 1ML/LT 27/02/2026 - 1LT por planta. RIEGO CON NUTRIENTES 01/03/2026 1LT por planta RIEGO CON AGUA 03/03/2026 1LT POR PLANTA PH 7.5