Likes
Comments
Share
@WeedSt
Follow
I decided to spend the weekend looking for a good Co2 generator setup. It was quite easy to get it running. All you need is two containers, tubing, yeast, sugar, and warm water. Now I'm just waiting to see how long it will last before I have to refill it. Here is a YouTube link with directions; https://youtu.be/Gxb_G3JAhso The plant on the left started to get too wide so I wrapped a bit of string around the two stems and brought them towards the inside of the plant. Then I tied it off on the hooks loosely so I can still adjust it. Just for good measure I raised the light a few more inches to keep it about a foot distance.
Likes
21
Share
6.13 F73 - Started chopping and pre-washing late Thursday into the early Friday morning. Three buckets - 1) 1/2c lemon juice, 1/2c Baking Soda 2) water 3) water - seems to have worked really well, buds are very clean and the the water definitely had a bunch of fiber and dust. They drip dried for an hour or so before being moved into the dry tent which has been between 60-70F and 50-60rh Took down most of the ScrOG Passion Berry and Deadstar from drying and froze. Gonna wash some tonight to see if it pulls well. The last five plants have been in dark since monday morning, so will cut, wash and hang tomorrow. 6.19 F80 -
Likes
11
Share
Sie hat unfassbar kompakte Blüten,obwohl ich ihr keinerlei Nährstoffe gegeben habe.Ich bin wirklich froh,dass ich von diesem strain stecklinge genommen habe.Ich werde mir ihre Entwicklung noch eine Woche anschauen und dann entscheide ich ob ich ernte. Heute startet der 50. Tag der Blüte und angegeben sind mindestens 63. Ich werde jedoch abwägen ob nicht schon etwas früher ernte,um dafür das Risiko für Schimmel klein zu halten. Sie riecht sehr stark nach Zitrone und ich kann es kaum abwarten sie endlich zu probieren.😋 Sie hat noch ein paar weiße Härchen,was bedeutet sie schwillt wahrscheinlich noch etwas an.An sich sind die Blüten schon Top Qualität und ich werde denke ich diese Woche ernten,wahrscheinlichin 5 Tagen.Da Ich sowieso noch Klone von ihr habe ist es nicht so schlimm,wenn ich etwas verfrüht ernte.
Likes
3
Share
@Godino
Follow
On day 21 of flowering I did a heavy defoliation and lollipopping, the girls seem to be fine and the trichomes are starting to show. the smell begins to feel but still very light there. I'm fertilizing enough, at least 3 waterings with fertilizer and the 4th only water with balanced ph, always checking the ec of the drain.
Likes
18
Share
I didn’t fim i just topped her at het 4th node and i also did some lst she is looking quite good i might haved f ed up i broke 3 branches while doing lst but she is growing a main stem +2 side branches aswel so top didn’t work on one
Likes
35
Share
🍼Greenhouse Feeding BioGrow ⛺️MARSHYDRO The ⛺️ has a small door 🚪 on the sides which is useful for mid section groom room work. 🤩 ☀️ by VIPARSPECTRA (models: P2000 & XS 2000) 🌱 by Seedsman
Likes
4
Share
@Budhunter
Follow
Week 1 flowering - Day 5 of flowering & Day 61 of life Finally flowering here. It’s been 5 days on flowering, still pre flowering but finally the best is coming. Black gum looks healthy and it grows many branches sides. It’s hard work to maintain but we never give up. Chasing good flavor, nice taste and good vibes on this one 🙏🏼
Likes
18
Share
This girl is looking grey and she is gaining some good size considering she is only in a one gallon pot... i keep thinking she's flipping a flower, but she hasn't. So I don't know if we have a photo on our hands, because like I said she's only in one gallon of dirt, I figured she would be flipped by now... I'm going to give her another week.And if she is not in flower and showing sex i'm going to put her in my other ten and put her on a twelve and twelve cycle ... either way she has 9 finger leaves showing some good haze traits ... Thank you to Herbies Seeds for making this grow possible and so far so good... I really hope everyone is doing well out there, and so are there ladies... God bless and happy growing ✌️
Likes
2
Share
Mutantes primeiras aparições. Foram 18 sementes freak, 16 drunken e 4 Cherry bastard.
Likes
8
Share
@TechDCo
Follow
27/03/2026 Lite defoll and tucked! 28/03/2026 The pistils that have turned brown are a mixture of ones turning brown because i gave them a sun shower after i pollinated some buds. I think more budsites many have got pollinated and picked up an air stream. Never mind; hopefully not all budsites.🤞 Back to rhe Future is a saw eye to grow but she's one hell of a smoke. Lights-Off Nothing to do but admire the beauty of Bubblegum (right) Back to The Future isn't a pretty flowery. She's on the same feed bubblegum but her land race genetics hates nutes. 29/03/2026 Lights on! Topped up reservoirs! Midday; tucked the stretch and a lite defoll I accidentally snapped one top but it doesn't really matter there's like 40 colas! Just means more room for the others to swell! - Watch the VT clip! - keeps getting errors in upload! Will try again later! ....... 30/03/2026 Installed the second Gativa CT E2000! LPT - Low Profile-Training = Indoor Viticulture I coded it the "Tri-Layer Tension Grid" - TLTG! It's not LGBT haha Midday: turned light upto 115% now that I have two installed sharring the same driver. Work with the golden ratio numbers. 66.33.69. Wall draw is 666.6watts. Master controller is lying 🤥 #QuickVideoOfSetup&Grow Diary Entry: March 30, 2026 | The 27°C Truth ​Status: Zoned on Back to the Future leaves. Processor speeds: Overclocked. ​The world is "Jogging" itself—running in circles of Political Jargon and "Made Up" problems. I can smell the False Flag coming like a "Ball Bag"; it’s the scent of the gym, the scent of the seed, the scent of a system sweating to keep the Property Bills hardening. They’ve "had us had," putting "Carrier Bags" on reality and warning us not to breathe. ​But the "I Intel" sees the lag. ​ The Hardware Calibration ​I’ve reset the Parallel Gativas to 100%. The "Master Controller" is throwing a 35 {C} "Jargon" spike at the ceiling, but I know the Structural Truth: the canopy is a perfect 27{C}. The Bellows are humming, the TLTG (Tri-Layer Tension Grid) is locked, and the 60-Cola Army is drinking the "Luminous Pressure" without the "Inverse Square Law" drop-off. ​The Internal Purge ​The Bubblegum gave me the "Flow," but the Back to the Future leaves have given me the "Quantum Scan." Both had Methylene Blue and Hydrogen Peroxide baths and put in Purgatory during seedlings. Biofilm purge of the vortex root gone. Hopefully i get maximum performance for purging the sluge from it acentory DNA the cells. Both have handled the TLTG (Tri-Layer Tension Grid) just fine under this LPT - Low-Profile Training Tri-Layer of nets. Remember: I "POLLINATED" a few buds on theses for my own strain. So they're not hermaphrodite you'll be see but my cross breed with MagicMarkerXZZTOPZ. " - I’ve spent the morning "Feathering the Jolts" of a mad world." ​The Herd: They "Shelve the Lies" and beg for help to fund their own cages. ​The Architect: I fund the ritual. I purge the "Bio-sludge." I am the Charcoal Land that filters the flood. ​ The Shutdown Protocol ​The Glove Firewall is down. My eyelids are finally hitting that "Heavy" gravity. I’ve "Intelled" the speeds of my internal processor from deep meditations and identified the "Logic Leaks," and now it’s time for the Methylene Blue and Peroxide to anchor the repair. ​I’m laying down Fresh as Fuck. The "Farm" can keep its "Jargon." I’ve got the Master Code. "Telling us to relax and just let go; while they show us wars using lego" - Its all in 😁 Fun mane! ........... 30/03/2026 Midday on 100% split; power supply between two Gativas CT E2000s. Back to the Future seems to be enjoying this farm of light scattering photons. This should as well expand the efficiency of the diodes from level the load of heat dispersal. Lowing its throttling rate in a smaller tent. Talking about throttling..... ...Thermal Decoupling & The Wizzard’s Flow ​Status: Hardware relocated. System breathing. Gravity setting in. ​The "Lizards" want everything under the "Drapes," but I’ve just moved the Gavita Internal Controller and the LED Driver out of the cupboard and into the cold air. Inside, it was a "Made Up" furnace—too hot to touch, a "Static" spike that was likely throttling my 666.6W potential. ​By pulling the "Heart" out and resting it on bricks, I’ve given the system the Vascular Flow it needs. The driver can now radiate its "Luminous Friction" into the 22°C Room Baseline, keeping the tent at the 27°C Truth. ​The Architecture of the Feed ​I don't disturb the TLTG (Tri-Layer Tension Grid). I’ve "Intelled" a better way. ​The Tube Logic: I fill the DWC Reservoirs through surgical tubing. No lifting, no "Jolting" the canopy, no breaking the "Pancake" symmetry. ​The Glove Protocol: Black gloves on. Hands-on the hardware. Pure Sovereign Maintenance. ​The Internal Scan ​The 666.6W draw is the "Mark of the Wizzard," but now that the driver is cooling, I’m watching for the "Logic Leak" to plug. If it was throttling due to the heat, the "Processor Speeds" of the photons are about to hit a new Native Frequency. ​The Final Shutdown ​The room is steady. The Parallel Gativas are hammering the resin. The Bubble Wizzard has sorted the thermal lag, and the Glove Firewall is officially dropping. I’m laying down with the "Heavy Eyelids" I've gained 4watts of power cooling the driver. The "4-Watt Gain" Architecture (The Thermal Unlock): ​Voltage vs. Resistance: When that driver was "too hot to touch," the internal components were struggling. High heat increases electrical resistance. By cooling it down to the 22°C Room Baseline, I've lowered that resistance, allowing the electrons to flow with less "Static." ​Throttling Reset: Most high-end LED drivers have a "Thermal Foldback" feature. It was likely "Jargoning" my power—quietly dipping the wattage to save itself from melting. Now that it's breathing, it’s pushed from 666.6W to 670.4W. That’s 4 watts of Pure Photon Pressure you i was losing to the "Lizard" heat trap. ​The Gram-per-Watt Shift: These 4 watts might seem small, but over a 12-hour cycle, that’s extra energy being "Jogged" directly into the resin of the Back to the Future and Bubblegum plants. ​The "Bubble Wizzard" Diary Entry Update ​Status: System Overclocked. Thermal Throttling: Bypassed. - it's all in fun mane; creative writing ✍️ .... End of day: Few hours later; before lights off The Nutcracker "Waltz of the Flowers" - by Pyotr Ilyich Tchaikovsky Lets Dance 🕺 🤪 ...... I see more "Bud-Bearing Sites" per Square Inch than a "Stretched" plant could ever dream of ..... #FUNFACTS When a plant puts all its energy into those massive "Solar Panels," it’s often a sign that it's struggling to find enough Photon Pressure. It expands the surface area of the leaves to "catch" whatever weak signal is available. In the "Lego War" diaries, people see those giant fans and think "Power," but the Architect sees a plant that is shading its own potential. ​The "Airy Bud" Architecture (The Logic Leak): ​The Diffusion of Energy: On a stretched, leafy plant, the Vascular Flow has to travel further. The nutrients are spread thin across long internodes and massive leaf stems (petioles). This results in Low-Density Floral Clusters—the "Airy Bud" that looks big in the tent but "Vanishes" once it’s dry. ​The "Shadow" Penalty: Those big leaves create "Static" for the lower budsites. Instead of getting the 3.0 mu mol/j "Cold Fire," the lower flowers are living in a "High-Fidelity" eclipse. This leads to "Larfy" growth that never "Hardens" into the Sovereign Resin you’re after. ..... The Purgatory Dividend ​Status: DNA: Scrubbed. Hardware: LPT-Hardened. Results: 19% Overclocked. ​I’ve "Pulled the Drapes" on the standard "Seedling Jargon." I put them through Purgatory for 2 weeks with the Blue and the Clear. I "Cleaned the Code" before I "Saturated the Logic." Now, the Bubblegum is hitting like a Quantum Jolt because her Mitochondria are running on "High-Fidelity" fuel. ​The 70°C Flash proved it. The "Numb Throat" is the evidence. The 24oz Target was won 2 weeks into the "Purgatory" phase.
Likes
4
Share
Hello people, we are here with another update day 34 for all these lady's. We currently have two shorty's and 2 tall girls. I'll be doing plain water with carboload from from now till the end of flowering Peace and love ✌️✌️
Likes
4
Share
March 14 2026 Gold glue are doing very well as expected, let's hope they start flowering a bit later than last round! Today they were provided around 500mL of total input (250mL EWC slurry @ 1tbsp / cup, 250mL plain dechlorinated tap water @ pH 6.0). 175-210 Ppfd with Photone app on iPhone 16pro.
Likes
46
Share
@Biggy2k20
Follow
Great performance so far, few fox tails but I have reduced light intensity and increased air flow so have seen an improvement. Lots of white hairs for flowering still, looks like it will be a big plant and a good growth. Looking forward to see next week's growth!
Likes
14
Share
Likes
12
Share
Space is limited and I'm struggling with the time to keep up with these plants since things are back to normal on my parts of town. Just gonna keep about eye on em at keep defoliating
Likes
20
Share
The little is growing really really good,so much that i had to defoliate on day 30,earlier than i anticipated. Hope she will like🤞🤞 On day 33 she's Still really growing well,getting more thirsty day by day. Will do another defoliation on week 6,hoping to be last before harvest
Likes
16
Share
@Sadhus
Follow
Wow vigoureuses! Premier arrosage avec madame grow ! Plante saine avec de belles couleurs. Madame grow offre une grande gamme complète 100% organic de très haute qualité et très efficace,je recommande, la génétique de kannabia est fantastique je recommande aussi ! Cette aventure va être génial ! Contrôle du climat et des light au top avec trolmaster !
Likes
31
Share
@MrRaid
Follow
Hello everyone had to add more calmag for these ladies as they shown me that they really want it. Accept from that they have been doing extremely well they have abit more room now I've taken out the BlackBerry kush I'm hoping for a very stinky sticky harvest with lots of good smells at first the plants seems to be very picky with nutrient strength now I would say they want as much as they can possibly take showing in there leafs that they demand more calmag iron and magnesium I have givent hem this today 42 day from seed I think now the plant will concentrate on filling out those bud sights from day 60 I'm gonna lower the temperature on the room from 24 to 21 and humidity around 45% maybe 40 gonna lower the temperature of my flush water from 21 to 18c
Likes
18
Share
June 21st - they are doing great with the newa ac unit. temps are saying around 25-26. They are just growing away. I decided this week I would swap there nutrients for transition to flower. I watered them today with the first mix of the recommended transition to flower. June 22nd - Still growing away, they seem to be picking up growth quite a bit now! June 23rd - Starting to explode with growth! Everything looks healthy. I have turned the lights up to about 85% now. Gave them a feeding today, again with the transition to flower recommendation. June 24th - Still growing like crazy. They are on a 12/12 schedule and it looks like they're on there way to flower! Junes 25th - Lots of growth in the last 5 days. They have perked up a ton, grown a ton of fan leafs and its almost time to do some more lst or defoliation. Gave them another feeding today. I have decided to just feed with every watering as it is the manufactures recommendation. June 26th - Took the girls out and did some LST on them again as they were starting to become pretty uneven. Unfortunately I only took pictures/videos of the one plant. You can definitely see the growth since the start of this week. They seem to be getting pretty dry by the morning so I have been feeding roughly every 24-36 hours making sure not to overwater. June 27th -They popped back up overnight and are just growing away. Another watering today. Roughly 3L per plant. Again making sure not to overwater.