Likes
Comments
Share
@WeedM8
Follow
Amazing strain even in hot temperatures it has nice frosty nuggets
Processing
Likes
4
Share
Hello everyone, The girls are finally outside in 20 gallon fabric pots. This season I have a greenhouse for them and I hope it goes good. Still have to build the first cages around them and start stretching them. 🎊🎉 finally, summer is here 🎉🎊 See you guys next week 🤞🤞🤘🤘👊👊👊
Likes
41
Share
@AumShanti
Follow
ॐ MOBY DICK from BARNEY'S FARM "Bedroom setup" 10th week of flowering from 12.1.2026. to 18.1.2026. but content of pictures is from 12.1.2026. to 22.1.2026. Harvest week :) also drying days included. Harvest was done after 4 days of darkness (15.1.2025.) i did heavy wet trim and let them hang for few days before puting them in nets, after some days in net, i removed all buds from stems and put all in jars, will burp them for next few weeks every few days. Trough drying process(10days) i took 25g for somoking. and with that included weight of dry bud was 992grams, also i forgot about first two braches which i removed and smoked while platns was alive at end of week 9 which was 18g, so all in all around 1kg with 13 plants. Here with these 13 plants which i had is three phenos, maybe only two plants was real Moby Dick (pheno no1), these others (most of them) was mix between G13Haze and WhiteWidow, with strong domination of WW over the G13Haze (pheno 2), and one plant was where G13Haze was more dominant over WW (pheno 3). All buds are dense and rich with trichomes, smell is citrusy and very very strong. This buds hiting hard, very strong sativa which i rly like :) Moby Dick was very easy to grow, plants rly liked heavy training, and once again Barney's Farm genetics did great for me. :) Take care and much love. ॐ
Likes
31
Share
This is my first induced flowering growth. I always grow weed outdoors with big satisfaction on yield and nature contact, But I have to say that training plants is real fun and I can’t wait to see the buds first appear and then fatten up. On day 5 of flowering she started to appear a little stressed, I think is a little overfeeding because her leaves are a little burned on the tip and a little underwater too but this morning end of day 6 appear to be recovering has the timelapse show on the end. Happy growing to you all brothers and sisters ☮️☮️☮️✌️🏼
Likes
9
Share
@GYOweed
Follow
Very frosty. Order GDP, BD, JG, KM. Gentle flushed few times, lowered hours to 9. All Purping up except GDP lol which is from seed.
Likes
5
Share
@AustinRon
Follow
TH 1Q2025 - Week 4 - Bolt I 
(ON Haze X Original Haze) X Northern Lights #2 “Todd’s Haze” Objective - 8 Female Plants, Topped ONCE @ Flip, 12” when topped - Modified Sea of Green Seeds Wet: 1139PM, 28.2.2025 Germinated: 2.3.2025 Flip: 21.3.2025 Harvest: 77 Days, DATE: 6.6.2025 _________________________________________ 
Weeks Summary: - Photos indicate we’ve been overdriving our plants. Lime - Yellow Green, Stressed lowers. NOT Relaxed. - Tue - EOW We’ll run moderate light, Low-Moderate Feed (EC: 1.1) __ Fri Mar 28, 2025 TH 1Q25 8:B:1:1 All plants have lifted, with minor praying at least.  Applied Remaining Gallon of Root Steering solution. TODAY we switch to Rooted Leaf Medium @ 1.3 mS/cm. At this point the Coco should be WELL BUFFERED with CalMag - Reducing Calcium to normal level, we should be able to run w/ NORMAL Calcium levels, no boots. We’ll see We need - more nitrogen evident in the plants - to get from 351 - 750 µMol/m2/s - To ramp EC from 1.2 - 1.6 When the girls are receptive . . . __ Sat Mar 29, 2025 TH 1Q25 9:B:1:2  PRE-CUT Foliar of MOMs (15 Min before taking Cuts): [ 1, pt] - Cal Mag Fuel: [ 2.5, ml] - Lush Green: [ 0.625, ml] - Resin Bloom: [ 2.5, ml] Wrap Label below Top Node Top to Node 3, Cut plunged in water - [x] 8 Cuts, “Todd’s Haze” - [x] 2 Cuts, Lemon Jeffery Dip Tray - Rooting Powder, Aloe Gel - Top + 2 Nodes Cuts to Rooting Cubes - Cut 45° just below 2nd Node - Gently Abrade cuticle of stem below 2nd Node - Dip END in - Rooting Powder - Beauveria Bassiana - Fresh Aloe Vera Gel - Afix IN Prepped Rooting Cube - 1/4” from BOTTOM NOT THROUGH - Place in Rooting Tray, Cover “Cut Foliar Solution” When All cuts in Dome, Foliar (1 pt) w/ - PCAL 1660: [ .25, g] - KelPak: [ 1, ml] - CalMag Fuel: [ 1, ml] # Acidification of PCAL 1660 - Photosynthesis Plus: [ .75, ml] DAILY UNTIL ROOTED - - [x] Verify Rooting Cubes are adequately hydrated - [x] Light Foliar with Cut Solution Take Cuts WHEN All Phenos are WELL into 6 Nodes - When ALL Cultivars have At Least 6 Nodes: - Top to 3 - Use Crown as Cut for Labeled Pheno - [x] Prep Cut Dome - [x] Pull Seedling Mat (78°F) for use UNDER Cut Dome - [x] Rooting Prep - [x] Rooting Powder - [x] Beauveria Bassiana - [x] FRESH Aloe Vera Gel - [x] Root Riot Cubes MOISTENED / NOT WET Cut Spray Solution - [x] KelPak: [ 4, ml, gal] - [x] PCAL1660, [ 2, g, gal] - [x] Photosynthesis Plus, [ 6, ml, gal] - [x] Check All Pots for Emergent Roots Once we’ve roots at EACH pot - Switch to Normal Fertigation . . . Fertigation: 1 Gal, EC: 1.2-3 - [x] Primer A&B: [ 5, ml] - [x] CalMag Fuel: [ 2.5, ml] - [x] Silica Skin: [ 2.5, ml] - [x] Lush Green: [ 2, ml] - [x] Root Anchor: [ 2, ml] - [x] Peak Bloom: [ 2, ml] - [x] Photosynthesis Plus: [ 6, ml]  __ Sun Mar 30, 2025 TH 1Q25 10:B:1:3 Fertigation: 1 Gal, EC: 1.2-3 - [x] Primer A&B: [ 5, ml] - [x] CalMag Fuel: [ 2.5, ml] - [x] Silica Skin: [ 2.5, ml] - [x] Lush Green: [ 2, ml] - [x] Root Anchor: [ 2, ml] - [x] Peak Bloom: [ 2, ml] - [x] Photosynthesis Plus: [ 6, ml] - [x] TM-7 (µNutrients): [ 0.5, tsp] # Teabag Style Infusion  __ Mon Mar 31, 2025 TH 1Q25 11:B:1:4 Fertigation: 1 Gal, EC: 1.3 - [x] Primer A&B: [ 5, ml] - [x] CalMag Fuel: [ 2.5, ml] - [x] Silica Skin: [ 2.5, ml] - [x] Lush Green: [ 2, ml] - [x] Root Anchor: [ 2, ml] - [x] Peak Bloom: [ 2, ml] - [x] Photosynthesis Plus: [ 6, ml] - [x] Quillaja 60 Powder: [scant] IF Initial appearance at Lights on doesn’t suggest “Relaxed, supple,” we’ll run @ EC: 1.1 Until resolved . . . __ Tue Apr 1, 2025 TH 1Q25 12:B:1:5 We’re Running Lowered Light. And reducing EC to 1.1 until we’ve plants that seem REALLY HAPPY. Fertigation: 1 Gal, EC: 1.1 - [x] Primer A&B: [ 5, ml] - [x] CalMag Fuel: [ 3.0, ml] - [x] Silica Skin: [ 2, ml] - [x] Lush Green: [ 2, ml] - [x] Root Anchor: [ 2, ml] - [x] Peak Bloom: [ 2, ml] - [x] Photosynthesis Plus: [ 6, ml] - [x] TM-7: [ 0.5, g] - [x] Quillaja 60 Powder: [scant] - [ ]  __ Wed Apr 2, 2025 TH 1Q25 13:B:1:6 EC: 1.1 LightIntensity: [ 400, µMol/m2/s] We only watered 220 / plant, about half of what we’ve been delivering. Foliar: # 1 pt Spray Bottle @ Lights ON - [x] Solar Rain: [ 2.5, ml] - [x] Silica Skin: [ 2.5, ml] - [x] Photosynthesis Plus: [ 1.5, ml] - [x] Quillaja 60 Powder: [scant] __ Thu Apr 3, 2025 TH 1Q25 14:B:1:7 EC: 1.3 LightIntensity: [ 401, µMol/m2/s]. # Staying low, waiting for plants to resolve Fertigation: 1 Gal, EC: 1.3 - [x] Primer A&B: [ 5, ml] - [x] CalMag Fuel: [ 2, ml] - [x] Silica Skin: [ 2, ml] - [x] Lush Green: [ 2, ml] - [x] Root Anchor: [ 2, ml] - [x] Peak Bloom: [ 2, ml] - [x] Kelpak: [ 4, ml] - [x] Photosynthesis Plus: [ 6, ml] - [x] Quillaja 60 Powder: [scant]
Likes
27
Share
New Aeroponics "root rain" mist cloner! Holds 2 gallons of water. I added 8 Tsp of CloneX clone/seedling nutrient. PH was 6.0-6.5ish, good enough! These clones inside got zapped pretty hard one day, because I forgot to plug in the water pump one time after playing with it hehehe... Some didn't make it, but most survived! every other plant was watered with just de-chlorinated tap water, for re-hydration. #4 has been selected as the winning pheno! The mother plant had her home upgraded to a 2gal pot. The root ball was not so bound, due to her receiving a root-prune not too long ago, she was re-potted back into a solo cup. I pruned the bottom of the root mass off with a light pinch, and potted her into her new 2gallon home!
Likes
10
Share
Wow this past week my house has been smelling so good! This strain is really great and is now one of my favorites, I'm not a big haze person but this is something different entirely from your regular hazes. This is truly so sticky and so stinky it's crazy. I can't wait to try it after drying and curing.
Likes
28
Share
@Suemchen
Follow
What a nice strain: she smells exactly the Same as Last Time 🤗 i'm impressed Day 106: Harvest Cut her today and wet trimmed her: Put the buds in dry ferm bags. I'll Check in her in a week 👌🏻
Likes
2
Share
Started flushing about 3 days ago. The plant itself has reached 12 weeks from germination. I will be harvesting this later on this week depending on how the flushes are going. I should of snapped off the lower branches at the start of flowering. But main goal with this setup was to grow naturally without any low stress training and topping. I will update the harvest very soon! One Love
Likes
7
Share
@Snipes420
Follow
Nothing special this week. Buds are getting fatter each day. I have been checking the budsites with a small microscope thing to check the state of the thc. They all still seem glass like and not cloudy or amber. Most white hairs have turned brown (except the sites that receive less light) i think She might be ready in a week or 2
Likes
11
Share
I see the 12 hr light schedule made things pretty small!
Processing
Likes
1
Share
Week 6 is week 5 I cannot change the weeks some how after uploading ❌ ❌ ❌
Processing
Likes
13
Share
@kevgrow
Follow
First time grower - Day 3 - Seedling Stage Unknown strain, hopefully its a female Light meter currently reads 101 lux x100 Should I give it more lighting or put it closer to the plant? Using roots organic soil, should I prepare for nutrient feeding after week 1? And if yes, what nutrients should I feed them?
Likes
16
Share
32 days from seed in glass. Changed pot, added more light, added humidifier, added fan. Now I using more nutrients.
Likes
21
Share
@BLAZED
Follow
Week 18 (30-6 tm 5-7) 30-6 Temperatuur: 31.4 graden (licht aan) 22.5 graden (licht uit) Luchtvochtigheid: 69% (hoogste) 50% (laagste) Ik heb de trichomen bekeken en heb besloten haar nog een dagje langer laten staan. Watergift: Geen. 1-7 Vandaag heb ik de trichomen opnieuw bekeken en die zien er goed uit! Veel cloudy en best wel wat amber. Ik hou echt van deze trichome foto's, echt mind blowing hoe dat er uit ziet! Dus vandaag gaat de schaar er in! 2-7 Ik heb besloten om een wet trim te doen zodat als ze droog is ze gelijk in de cure pot kan. Geloof het of niet, maar ik ben wel 12 uur lang bezig geweest om alles te knippen 😅 Op 1-7 ben ik in de middag begonnen en in de vroege ochtend van 2-7 was ik klaar. Het natte gewicht van de buds is 283 gram, en het natte gewicht van de trim is 61 gram. Ik ben nu al super tevreden met het gewicht! Dit is meer dan het dubbele aan gewicht vergeleken met mijn eerste grow. De buds zien er ook echt mooi uit. Ik schat dat het tussen de 50 en 75 gram droog gaat zijn. Ik ben benieuwd, nu een paar dagen drogen! Droogtent: Temperatuur: 23.4 graden (hoogste) 21.2 graden (laagste) Luchtvochtigheid: 59% (hoogste) 42% (laagste) 3-7 Droogtent: Temperatuur: 23.2 graden (hoogste) 21.5 graden (laagste) Luchtvochtigheid: 50% (hoogste) 41% (laagste) 4-7 Droogtent: Temperatuur: 23.1 graden (hoogste) 22.1 graden (laagste) Luchtvochtigheid: 53% (hoogste) 46% (laagste) 5-7 Na 3 dagen is ze droog genoeg om te curen. Wel heb ik iets te lang gewacht want de LV in de jar geeft nu 57% aan. Ik hoop dat dit over een dag wat om hoog gaat. Nu een paar weken curen en dan kom ik met de rook verslag 😁 Ik zal binnenkort ook even berekenen wat de gram per watt is, aangezien ik de lamp niet de gehele grow op 100% had staan. Het droge gewicht van de buds is precies 75 gram, en het droge gewicht van de trim is 19 gram. Samen maakt dat 94 gram! (De trim gebruik ik om een CBD cake of bubble hasj te maken) Ik wil iedereen bedanken voor het volgen van dit avontuur! Tot de volgende keer!
Likes
23
Share
Just keeping the temps correct is always a challenge in certain indoor grow areas but a tube heater seems perfect. Fan heaters should never be used as they ruin the flavours of the final product. I used a very small fan heater in my first run (obviously not blowing at my plants) but they are too aggressive in heating the air in my opinion and results in on off operation causing fluctuations in temperature. I have purchased a cylinder ceramic heater that does the job perfectly. I know that the temperature in the tent will always be in the good zone.
Processing
Likes
16
Share
Broke my phone so haven't been able to update but all good now. The soil is peat moss based with added hardwood and banana skin ash to bring the pH up to 6 and bunny buttons mixed in (first time trying rabbit poops) I've also added seaweed . To be sure I don't under feed I've decided to use biobizz , grow , bloom, and top max. I've been keeping the soil damp but not soaked with no run off . The light is at 15000 lux.
Processing
Likes
32
Share
The buds hage been building and full of tric's. A few new white hairs and most have turned amber. Fed again this last week and added a bit of molasses. I think no more nutrients now. I will start checking tric's and will harvest when they are mostly amber. I think this still a couple of weeks from harvest. Thanks for looking. Cheers
Likes
34
Share
@Roberts
Follow
Auto moon rock has sprouted, and is starting week 1. She is a bit on the short side, but that can change fast. So off we go on another experiment, and adventure. Thank you Medic Grow, and Divine Seeds🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g
Likes
3
Share
The girl is hungry and asked for 5 liters watering. (1200 ml has flowed through)😋