Great. Week. No signs of mold or pests. Seeing plenty of lady bugs still and this is now almost a month after I first released them. Seeing some dragon flies and assassin bugs too. Niceeee Plants are doing super well. No deficiencies with plenty of swell occuring. More in some than others. The zkittles phenos that flowered early are almost ready. Maybe one more week or less.

-Esta semana simplemente las he regado un par de veces con un litro y medio cada una. -A una de las GG ya estoy haciéndole el flush final -Empiezan a enfermarse las hojas. Puede ser falta de calcio, potasio, magnesio...no lo se. Les he echado uns buena dosis de potasio y las que están más afectadas les he echado sgua limpia y un poco de potasio. -una de las GG le falta poco para cortar. El resto les quedará poco menos de un mes

The Soaptini is a small seedling with a slow start but it’s coming around I have high hopes for the little plant This past week was smooth sailing and I topped all the plants

26/6 -Temp 25-27day/22-24night -52%RH (2+-) 27/6 Water day* plain water 6.1 PH -Temp 25-27day/22-24night -52%RH (2+-) *** Had a humidity peak because of a thunder storm 60-70RH for under 24 hours 28/6 -Temp 25-27day/22-24night -52%RH (2+-) 29/6 Water day* Gave it a bit extra since im leaving a couple of days -Temp 25-27day/22-24night -52%RH (2+-) 30/6 -Temp 25-27day/22-24night -51%RH (2+-) 1/7 -Temp 25-27day/22-24night -51%RH (2+-) 2/7 -Temp 25-27day/22-24night -51%RH (2+-) I was away from them 29/6 - 2/7, but i gave them early water before leaving which lasted :) When i came home they had grown beautifully and was looking healhy. I could moniter the humidity through my Inkbird humidity controller.

Day 35: The Fruity girls has been packing on the pistils this week and also oozing sticky if I touch her( wishful thinking on my amazing techniques.!.lol) . She is very manageable at this size and without the Lst and supercropping, she would have already outgrown my space I think. My lights are at near max height above her now and I think when space under the Mars sp250 is available after the FFT girls harvest , I will get her under there to get even more light into her growing lowers for the extra month I expect her to go . Her genetics from the Bg41 seem dominant and being an 11 week strain to get the best from them, this could be an advantage. I dont doubt this new strain could go big at all. seeing how quickly she took over in size from the majority of the strains in this run had given me a great boost as she is the only one of her kind in the world !!!!!. lol . A very nice feeling and u understandable how @club riot has moved into his own production. She has no signs of any issues at all and I have now moved the dehumidifier back I to the room to push the rh down and make them sweaty with oil hopefully. Her smell is a nice sweet , sickly weed aroma at the moment but knowing both parents , she can only give me a bowl full of fruit and fizzy ice cream come cure time. So that's all there is to ramble on about this week , I hope everyone is safe and well during these controlling times. Freedom will come soon. hold the faith.

Joana teve dificuldades para se desvencilhar da casca da semente, intervi gentilmente neste processo utilizando uma pinça. Logo após este processo ela apresentou a cotilédones, e as primeiras folhas, e um ótimo desenvolvimento. Aparentemente agora ela pegou no tranco! 😅 Joana apresente menor densidade de folhas, porém maior estatura. 5,3cm A planta Maria vem forte desde a germinação. Ela apresenta maior densidade de folhas e menor altura. 5,0cm Fiz a primeira rega com fertilizante 2ml flowermind A e 0,25g flowermind B diluído em 1 litro de água pH6.5. Fiz a rega com 70 a 80ml desta solução em cada vaso. Após a rega elas curvaram para baixo, isso me preocupou. Espero que não seja nada demais. Até a próxima. 😇

I transplanted my blueberry muffin plant that was in a 5 gallon pot to a 20 gallon pot mainly using some nectar of the god soil and worm castings I've had in a tote. She looks like she's going into flower hopefully she gets a bit bigger before she fully flips.

finally they are in flower! Yay final foliar spray applied. They are still smelling like chocolate and peanut butter. Did not get 1 drop of rain this week. It is getting so frustrating plants are 1/4 what they should be this year.

She is looking good haven’t watered in a while as the continuous rain helped. I’m doping she can gain more height in the next 2 weeks as I intend to flower her into the dry season.

OCTOBER 11h to OCTOBER 17th Sunrise: 08:20 | Sunset: 19:03 | Total Daylight: 10:43 This was another pretty good week for weather, however the last couple of days have been cloudy with rain, causing some spikes in greenhouse humidity. Temperatures for the most part have been good, with one overnight low in the greenhouse of 13C. Purple Romulan is doing well but is the furthest behind in reaching maturity of all specimens in garden. Flowers are of decent size, with adequate trichome production. Greenhouse is emitting very strong smells now, mostly a sweet skunk scent. Weather forecast appears as though it will be adequate and manageable temperature wise for the next week. DAY 155 Greenhouse 13C in the morning, with outdoor temperatures down around 3C (frost evident on rooftops in area). 500mL drip of plain rainwater to all specimens. DAY156 1L hand water BTI treated rainwater (no additives); Greenhouse held to 18C overnight, humidity a little high (51%) but dropped as sun rose; Overcast day. DAY 157 Beautiful sunny day, with warm temps; Greenhouse was 18C in the morning. DAY 158 -1C in the morning outside, 13C in the greenhouse, which is fine. Nice sunny day. DAY 159 Overnight low outside 5C, 17.5C in greenhouse, which is ideal. Humidity in check, at 41%. Cloudy, overcast day, with greenhouse heater working to maintain day-time temps of 21C (no solar energy to drive heating). DAY 160 Greenhouse 14C in the morning, 3C outside. Humidity at 41%; Clear morning, with some sun, turning cloudy with light rain in the afternoon, resulting in a humidity spike in greenhouse to 50%. DAY 161 Lots of rain overnight, causing spike in greenhouse humidity to over 60%; Will require monitoring; Temps in the morning 18C in the greenhouse, mild outdoors.

This plant will be grown again for sure. From start to finish there wasn’t a single issue and she performed well under my Optic LED and LST. Can’t wait to grow this again.

Aug 28 So close to harvest time. Smell is getting super strong. Not many amber trichomes on the colas closest to the lights yet, telling me that it needs a little more time to cook. Otherwise the trichomes look to be cloudying up.

Gezogen im Eazy Plug 2,5 x 2,5 und in dem RQS Propergator. Danach in den Becher mit Plagron Lightmix eingesetzt und ins AC Infinity Gewächshaus gestellt. Nutze es zum ersten mal und hatte die Lampe zu niedrig eingestellt. Jetzt steht sie im Sweetspot.

Día 15 (04/11) Las plantas se muestran esplendidas después del 1er riego e introducir la 1ª Bio Tab! 😍 Subo a DLI 35 Día 16 (05/11) Las plantas se muestran espectaculares y radiantes! Un color verde intenso y sano! 😍 Día 17 (06/11) CBD Auto 20:1 #1 tiene un crecimiento increíble! El resto tiene un desarrollo perfecto para sus días 17 días de vida! Día 18 (07/11) Mudanza y riego! Las plantas se mudan al armario definitivo de 60 x 120 cm por varios motivos: - CBD Auto 20:1 #1 está empezando a tocar las paredes del armario pequeño - CBD Auto 20:1 #2 ha tenido una ventilación menos adecuada que sus compañeras, ya que el ventilador quedaba justo encima de ella, y el flujo de aire era inadecuado Esto ha provocado que la maceta de CBD Auto 20:1 #2 no se seque a la misma velocidad que el resto. Espero que no afecte a su crecimiento - Las plantas pasan a tener dos lámparas a su disposición (230W + 100W) ajustadas con el regulador al 60% - Mantenemos DLI 35 tras varios ajustes (tener 2 lámparas simultáneamente es más complicado de ajustar!) - Colocamos dos ventiladores oscilantes para que el flujo de aire sea adecuado dentro de la carpa Riego: 4 días después del 1er riego, las macetas se muestran "ligeras" excepto CBD Auto 20:1 #2 por la falta de ventilación comentada arriba Riego con 750 ml de H2O RO excepto CBD Auto 20:1 #2 Día 19 (08/11) Las plantas se muestran esplendidas y creciendo mucho! Día 20 (09/11) Macetas poco pesadas, pero no lo suficientemente ligeras para regar Día 21 (10/11) Introduzco la 2ª Bio Tab a 5 cm de profundidad, lado izquierdo Riego con 750 ml de H2O RO a todas excepto CBD Auto 20:1 #2 que se riega con 1 Litro Aplicación foliar de Boom Boom Spray 5 ml/L. Aplicar justo después de encender la iluminación. Aplico LST a CBD Auto 20:1 #2 💦Nutrients by Bio Tabs - www.biotabs.nl/en/ 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en-us/products/pro-mix-hp-biofungicide-plus-mycorrhizae "GDBT420" 15% DISCOUNT code for the BIOTABS Webshop https://biotabs.nl/en/shop/

They be stretching!! she has sprouted up alot this week! I am not seeing the normal vigorous growth that i have previously and honestly I think its the $50 cheapo ph tester i use, its not very accurate i dont think!!!! Sooooooo I finally bit the bullet and bought a $120 one that arrives tmr. This should help alot I think as I am seeing deficiency issues that I believe are related to the PH being off!!! by next week I will know how bad my tester was, this is something i wanted for a while but just didnt want to spend the 120 for a quality one, hope this helps alot!!!

Tuesday the 20th of June day 55 of 12/12 the buds have got really dense in the last couple of weeks and swelling up I plan to harvest between day 60 and 65 gonna check the thrics tomorrow and see how gbey are looking smelling so good, looking forward to see what kind of weight I got on this run seems to be getting better each time so hopefully I pass 116g let me know what yous think 🍁😎

Lot of leaves taking forever to trim

Start of week 8,flowering, looking for amber trickomes,took off a branch at day 52, trickomes,were mostly milky some clear. I want to know the sweet spot for this girl if you know what I mean. I will post other pics of early cut latter. Also I switched to blue spectrum light only, supposedly it gets more UV light and packs on more resin(higher T H C ) ,Not that it needs more, but in the name of science I am willing to put in the extra effort. 🔎😎