So, I harvested my 2 older girls around 4 weeks ago, the 2 younger ones took that extra 4 weeks, just chopped them now! Initially, I was really upset when I harvested the first two - they just looked really bad and loads of fluffy larf. So, I wrote a negative review but I deleted it because when I smoked some, it was really good! LOL. But still just had no good aesthetic. I decided to feed the younger ones way more nutes than I was giving the other ones, and increased the rate of water feeds... and WOW. They responded so well and they came out HUGE!!!! MAN!!! These nugs came out beastly. The older ones 100% were being fed way too low a dosage of nutes, and were not watered frequently enough. I've only just chopped them all and hung up to dry. Will update with a smoke report when they're ready! So, the pics im posting are of the two younger plants that were harvested later. I do not have pics of the earlier harvest, unfortunately, but it looked terrible (from my own doing it seems as I mentioned above). As you can see in the first pic, I had to hold her up as she was falling over on her own weight because the nugs were so heavy (actually had to use many ties to keep both the plants from falling in the final 2 weeks). Not too many pics but just an idea of how they were looking. Dense, big, frosty - not SUPER gassy in smell but still smells good! The side branches were all looking like main colas! Didn't LST or anything, just a bit of lollipopping and let it do its thing! Each pic is of a different bud site. Will also update with more details such as weight when it's dry! Stay safe, friends! ┏(＾0＾)┛ -TickTockCroc

😎🤪

July 5 - The girls are still doing awesome. temps are between 21-26. Humidity is 40-50. Still feeding every 24-36 hours with 3L per plant. July 6 - They are doing good. Showing lots of flower sites now. Unfortunately I did not get any pictures today. July 7 - Tons of progress since last week. I don't see any signs of any problems, and still no pests! The smell is getting A lot stronger as it starts to flower more July 8 - Still doing there thing, no problems, temps and humidity is fine. Have been feeding every 24 hours now as they seem to be really thirsty July 9 - Super happy with how they are doing. No issues yet. Smell is heavier, and tons of bud sites showing up. Only issue is they are growing pretty uneven. July 10 - Time to get a even canopy! First time doing some HST. I also did some defoliation. One of the stems split open a bit but it seems to be doing just fine. I did he HST and defoliation in the morning, i then took pictures of 12 hours later and everything seems just fine! July 11 - Everything seems to be a lot more even and the broken stem doesn't seem to affect the growth.

Bud sites are getting ready now. I did a bit more LST and removed a few side shoots which never gonna make it due to lack of light. I replaced the light, under the TS 1000 she was praying all day long. On the previous run I had problems with the FC3000, it was turning itself off at random times. Mars Hydro was kindly sent me a replacement controller, so far it seems like this problem has been solved. However, I tried to use the app again and it’s still shite. 💩😂 So I just use the light in manual mode. Such a shame for the extra features I cannot use. For DLI I will use the following chart: AUTO FLOWER LED LIGHT INTENSITY Recommended LED PPF/PAR Values / DLI Based on 20 hrs. of light. Seedlings 150 - 200 umol / DLI 10.80 - 14.4 moles per day Veg up to 9" 450 umol / DLI 32.40 moles per day Early bloom 500 umol / DLI 36.00 moles per day Mid bloom 650 umol / DLI 46.80 moles per day Late bloom 750 umol / DLI 54.00 moles per day Ripen 400 umol / DLI 28.80 moles per day *** Use extreme caution going 700 umol or higher @ 20 hrs/day this could cause leaf burn*** The only difference is that I will keep this run in 18/6, so I ignore the PAR values above. IMO the best thing you can do is to read the leaves all the time and use the charts as a guidance.

~ AirCube Active Oxygen Ebb/Flow System sponsored by GrowAce, featuring Strawberry Gorilla Auto by FastBuds ~ Well guy's and gal's here we go again on another exciting Autoflower run together! This time will be different as I will be doing a 'Hydroponic' run utilizing the AirCube Active Oxygen Ebb/Flow System by GrowAce, who were kind enough to sponsor me for this run, so it should be interesting to see what results I get and have some fun along the way! •Let me first tell you about this 6 Pot Ebb/Flow system from GrowAce: "The AirCube system is the one and only Ebb & Flow grow system on the market that combines the benefits of air pruning with a fully automated Ebb+Flow system! With the AirCube's proprietary fabric pot in bucket design, this system is guaranteed to outgrow any other Ebb + Flow system on the market. The results speak for themselves- grow MASSIVE roots that result in MASSIVE fruits! Air Pruning- Air Pruning only happens with fabric pots. As the roots reach the fabric walls of the pot, they penetrate and grow into the breathable fabric. Once penetrated, the roots are exposed to air, which causes the tips of the root to dehydrate and naturally prune themselves. This natural pruning process forces the roots to grow tons of lateral fibrous feeder roots. This results in a plant that utilizes the entire root zone and fills the entire pot with tons of roots. These fibrous feeder roots are incredibly effective in uptaking water and nutrients, resulting in a plant that grows healthier and more vigorously! Oxygen Benefits- Without oxygen, nutrient absorption cannot occur. On a molecular level, oxygen is needed to transmit nutrients across the cell walls and into the roots of a plant. With the AirCube's proprietary bottom lifted draining design, the system actively draws all of the water out of the bucket pulls vital oxygen into the root zone. Maximum Versatility with Any Grow Medium: The AirCube System is the only system on the market that allows you to use any growing medium you like. Use coco coir, soil, peat moss, perlite, vermiculite, hydroton, rockwool or any other medium you wish! This system is the most versatile Ebb and Flow bucket system in today's hydroponics industry. Temperature Control- with the fabric pots constructed with highly porous polypropylene fabric, heat dissipates easily and effectively. Unlike standard plastic pots, heat isn't trapped in the root zone. Heat in standard plastic containers can reach temperatures of up to 125 degrees. When this type of heat is trapped and unable to escape, it can damage your plant's health and limit the potential of your harvest. Growing in the AirCube System, plant roots grow cooler, healthier, and more vigorous. Largest Pots in its Class- this system features 5 Gallon grow buckets, the largest pot size of any other ebb and flow hydroponic system in the market. Modular and Expandable- start with 6 grow buckets and expand up to 36 grow buckets with the optional 105 gallons PopTank reservoir!" For my medium and nutrients I decided to also switch things up from my regular Organic runs, going with Plagron Nutrients and Root Royale 70/30 Coco/Perlite. When filling the fabric pots with medium, I first added just under a gallon of horticulture perlite from Nor-Cal as a base layer to ensure good drainage and then filled the remainder with the Root Royale. •Now for one of my favorites, and award winning strain from my friends at FastBuds... Strawberry Gorilla Auto: I'll be running Strawberry Gorilla Autoflower which is a 55/45 Sativa/Indica Hybrid. "ATTENTION ALL! Due to our continuous efforts in evolving our breeding process, we are proud to confirm that our Strawberry Gorilla Auto has now become one of the most potent autoflowers in the world! Paving the way to our recent success where she ranked on top & brought home the gold at the very first American Autoflower Cup in California. Moreover, she proved that not only modern autoflowers can compete with photoperiods, but they can even beat them in their field. At the most recent edition of the Farmer’s Cup and competing against various photoperiodic strains, Strawberry Gorilla Auto took home the title of 'Highest Combined Terpenes' in the highly sought-after 'Home Grow Hash' category, with an impressive 97.163 mg/g total terpene content! Our exceptional genetic selection's crowning Strawberry Gorilla Auto strain is a spectacular hybrid known for producing yields of up to 600 gr/m2 in 70 days. This is a very manageable grow that can reach heights of up to 150 cm - due to its magnitude we recommend it for more experienced growers, as a huge plant may be a little overwhelming for first-timers. This show stopping sativa heavy hybrid is perfect as an all day smoke, producing a taste bud tingling, pungent berry and diesel terpene-rich flavor combo that leaves you with a grin from ear to ear, a perfect choice for those looking for a day-and-night autoflower! "* *References: GrowAce.com, 2fast4buds.com ______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ The Setup: • AC Infinity 4x4 tent •AC Infinity Cloudline T6 Exhaust Fan w/ Controller 67 •HLG 650R w/UVA Bar *** For some reason GD does NOT have a listing for the USA version of the 650R so I selected the closest match to it. •AirCube Active Oxygen Ebb/Flow 6 pot System •TrolMaster Hydro-X Controller for light •AutoPilot APC8200 co2 controller fed by a 50# tank •16" Hurricane oscillating fan and 8" floor fan •Tent cooling via filtered outside air delivered by AC Infinity Cloudline T6 fan •BlueLab instruments: PH Pen and Truncheon Nutrient Meter ______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ Weekly Updates: 12/20- Week 7 of flower and the end is drawing ever closer for these three Strawberry Gorilla's from FastBuds! Today, I started off this week with a drain/clean of the AirCube reservoir, after which I filled it with 80L of well water and added in the Plagron Nutrients (Green Sensation first, then 'A' & 'B' base nutrients, finally the Royal Rush). After the nutrients were added and the EC checked ( it's 2.0), I ph'd the solution to 5.7 @ 68℉. 12/22- I'm continuing with six feeds per day @ 900+/-ppm's, the HLG 650R is at 100% power 28" above canopy and they are getting 4 hours of additional UV during the middle of the light cycle. Tent temp's are running 68-75℉ at a RH of 40-45% and co2 levels are running 650-900ppm. 12/24- The #1 and #2 plants continue to be the better looking of the bunch, with the #2 being the 'one'. The #3 plant continues her struggle but has a generous coating of trichomes covering her flowers! 12/25- ~🎄MERRY CHRISTMAS!🎄~ 12/26- Seven weeks of flower and only a couple more to go! I'll be starting to flush these ladies in the coming week and they should all be beginning to fade soon! Hope to see you next week! Growers Love!💚 💚 Thank you for checking out my passion in life! Please visit as often as you wish and I hope you enjoy this journey as much as I know I will! Grow what you love, Love what you grow!💚

Decidi arrumar as plantas utilizando arame rígido para espaçar melhor os Buds e garantir circulação de ar e luz para todas as flores. Produção de resina começou a aumentar essa semana, se tornando visível a olho nu a quantidade de resina nas flores. Percebi que as pontas das folhas estavam queimadas, o que é sinal de nutrientes em excesso. Decidi então utilizar água sem cloro para lavar a terra das plantas. Utilizei 5 litros por planta. Como está chegando ao fim da floração, não pode ter tantos nutrientes na terra.

Ab den 13:11 ab zum trocknen. Da freue ich mich

Las lluvias diarias están empezando a atrofiar mi cultivo en especial las plantas grandes que se les encontró un poco de oidio está semana les pondré un ventilador para controlar o disminuir la humedad igual limpiare toda la área afectada

Divided into two boxes 14 in 1x1 20 in 120x120

Well well well ! I'm planning to cut eveyone in about 10 days. Just watering and slowsly starting to remove fan leaves Pretty happy about the conditions in my room, i have around 45-55% RH and maximum 24 degres. The drying will occur in this growbox, so i think i'll can have a nice and slow dry See ya next week for the last 10 days 😍

Ciao a tutti, cari amici coltivatori guerriglieri e non!🤙🏼 questa terza settimana è stata abbastanza impegnativa perché ho iniziato ad applicare la piegature (o Lst come la si voglia chiamare). Solitamente uso questa tecnica perché trattandosi di una varietà autofiorente è meno stressante per la pianta e abbinata ad una “regolare” defogliazione permette di ottenere dei risultati interessanti in termini di raccolto. Oltre a questo, la parola d’ordine di questa settimana (fortunatamente conclusa) è solo una: FREDDO! infatti, dopo un inizio settimana di temperature piuttosto miti, la temperature sono diventate più fredde. Ah…che sia chiaro, quando dico "freddo" mi riferisco a temperature più basse dei valori ottimali che comunque che rendono più stentato lo sviluppo e la crescita della mia piccola bimba (dovrei cercare un nome da darle😅). Nel complesso però la mia piccolina boxeuse si difende alla grande!🥊 01/05/2022. 1l d’acqua: Ph: 7.0 Ppm: 397 T: 24º Altezza:7,5 cm T Max: 29º T Min: 18º Hum Max: 87% Hum min: 46% Sembra in buona salute, ha un colore verde vivo ma la crescita sembra un po’ lenta. Ancora niente prodotti. 01/08/2022. 1l di soluzione nutritiva: Ph: 6.20 T: 21,6º Ppm: 679 Temp. Max (lampada accesa): 27,4° Temp. Min (lampada spenta): 18,1° Hum. Max: 71% Hum. Min:49% Oggi si iniziano a dare un po’ di nutrienti, io utilizzo la linea dell’advanced nutrients ph perfect Grow/Micro/Bloom come Base (1ml x 1L di acqua demineralizzata per ciascun prodotto) più B-52 e Voodoo Juice (2ml x 1L d’acqua demineralizzata). La piccola non presenta problemi, ha un’altezza di 10 cm e sta sviluppando il 3° internodo, se continua così tra qualche giorno si inizia con LST. 01/10/2022. Oh oh…😲 le foglie più giovani mostrano una leggera clorosi ai bordi con venature leggermente più scure, potrebbe essere dovuto a un Ph sbilanciato oppure a una carenza di calcio e magnesio. Forse conviene darle una leggera fertilizzazione tramite spray fogliare. 01/11/2022. Bene, la clorosi fogliare 🍁 perdura quindi proviamo a risolvere il problema con uno spray fogliare : Advanced Nutrients Sensi Cal Mag Xtra: 2ml x 1L d’acqua. Una bella spruzzata generale sia sulla pagina superiore delle foglie che sulla pagina inferiore in modo da permettere agli stomi di assimilare la soluzione. Iniziato LST piegando la cima apicale fino a farle quasi toccare il bordo del vaso.

Can’t wait for harvest but trichs telling it’s not ready yet. Smell is incredible- fresh and juicy. Top colas looking ready but down part still needs more time. Partial harvest? What would u do? Don’t want to overripe. What’s ur opinion?

🌸 Flowering Week 1 — first week after flip! Both girls officially entered bloom and are starting to show early pistils. The stretch already kicked in and the canopy is filling up nicely under the Spider Farmer G3000 💡. This week I noticed the first signs of powdery mildew (PM) 😬 — just a few small white spots on lower leaves and shaded areas. Immediately dropped RH and started preparing to treat it next week with Hydrogen Peroxide 3% (H₂O₂) foliar spray. Feed mix (per L): • Corex 1 ml/L • Terra 0.4 ml/L • CalMag 1 ml/L • Mira 0.2–0.5 ml/L (pH adjust) • Bud Candy 2 ml/L • Terpinator 5 ml/gal (~1.3 ml/L) • Florex 0.5 ml/L • Aurora 0.5 ml/L 💧 Watering around 15L per plant with 10–20% runoff. PPM ~1350–1450 @ pH 6.0. Plants are still praying strong, no major stress visible 🌿. 🌡️ Environment: 26–29 °C (day) / 23 °C (night) 💧 RH: 50–55% 📝 Observation: PM just appeared this week — I’ll continue with Hydrogen Peroxide 3% foliar spray in Week 2 to kill and control it. If anyone has other proven PM-fighting tricks for coco grows, feel free to share 🙌. Excited to see the stretch continue and bud sites start stacking next week 🌿🔥

Looking very lovely

En esta actualización se incluyen 2 semanas ya que por trabajo me fue imposible añadir la semana anterior. El día 15 de Agosto recibió la segunda pulverización de Bacillus Thuringiensis para prevenir el ataque de las orugas. Sigo alternando riego de agua un día con riego de Ascophillum Nodosum al día siguiente. He dejado de regar con Cannazym.

Temperatura variando de 23 a 29C Umidade entre 60 e 85% 18/6 fotoperiodo

Bene continua a crescere super bien......il cerbero sta andando verso la maturazione 👍.continua così bella gustosa terapia mia 😉🤤

Week 21: Decided to Flush the medium with pH tap water and reduce ppm to 850 in case of nutrient burn or toxicity.

Growing like a weed. Light burn mid veg, due to ph meter broken. Quickly recovered after flush. No issues since. Day 14, lowering nitrogen tomorrow. Slowly raising her ph a wee bit, she doesn’t seem to mind. 7 out of 8 seem to be on the same pace, one is a little slower. All plants, aside from color, look the same genetically. Rare to have a bag of seeds with the exact same plants. Good job Grower’s Choice. Still no pollen sacs on sprayed branches.