Likes
Comments
Share
@grundoh
Follow
Right now I am just playing the waiting game with White Widow and Industrial Plant. Both have shown signs of maturation with their trichomes but neither one has a majority of milky trichomes yet. In hindsight, I should have waited until Industrial Plant was more mature before I started flushing her -- I've lost a few weeks that I could have been continuing to fatten her up. I added more bamboo rods and tied branches to them with some plant tape on both plants. White Widow's buds are rock hard and keep bending its branches so hopefully the extra support will help. I cut off the main cola and a side cola of Industrial Plant CBD due to bud rot that I failed to notice for roughly a week. After cutting out all of the bud rot I could find on Industrial Plant I checked over her and White Widow meticulously to make sure everything was kosher. I added a spare oscillating fan in the tent to try and improve air circulation in the room. I have had trouble with humidity and temperature shifts throughout this grow -- something I'll have to dial in as I progress. I imagine the climate shifts combined with how thick the main cola was probably contributed to the bud rot. Seedsman White Widow Auto is ready to be harvested as of Day 100. Over 2 days her trichomes really started to turn amber. I have started flushing her as of today and plan to harvest a day or two into the start of Week 15. As for Dinafem Industrial Plant Autoflowering CBD? I am thinking of just cutting my losses if her trichomes haven't gotten to at least majority-milky by the time White Widow gets chopped. She just looks mostly-dead and only wants a drink once every 7-10 days now. That and I have some new gear I really want to test out, as well as some different ideas for my second run that I've been itching to get started on.
Likes
7
Share
i decidet to let the plant dry out before harvest to give her some stress. I also reduced the light intensity. The smell of the Pheno #1 is funkier and louder compared to the other but the smoke will have the final word. No fertilizer the last 2 weeks of flower.
Likes
3
Share
Buenas Farmers!! Después del problemas de la sobre fertilización... a pesar de eso huelen espectacularmente sin hablar de la explosión de resina de nuestra Gorila Z y la Blue Gelato 41!! Un placer para el Paladar 👌🏻
Likes
4
Share
Week 5 from seeds and they are grow fast and started to LST, looking good and health growing perfect under 24 of light set at 400watts @growerchoice .. @shogun All shogun feed to be used @ShogunA&B coco @Shogun calmag @Shogun active boost @Shogun zamzym
Likes
2
Share
Likes
13
Share
@GrowGuy97
Follow
Flower day 24 - Ladies are coming along great! A few are having calmag deficiencies but nothing major, other than being a bit crowded I couldn’t be happier with the grow so far! Thank you to everyone following & happy growing friends!✌️🏼🌱 Flower day 25 - Humidity is at 47% temp is at 79F - Ladies got watered today at 6.5 PH , a few got some calmag. Happy growing friends!✌️🏼 Flower day 27 - RH is 51% Temp is 81F - Ladies got fed today, I got the fox farm Dirty Dozen kit is so the got a lot more stuff this week hoping it helps! Happy growing friends!🌱✌️🏼 Flower day 29 - Noticed some PM on one of the Gorilla zkittlez😫 have her pulled out of the tent right now apply neem oil hoping she will bounce back!
Likes
11
Share
Stardog room it is looking pretty good and is thriving. Hopefully get the results we asking for. Aya room up to now is giving pretty impressive results and it looks like they like the enviroment even tho its not fully equiped. After adding the c4 neet to celan the insides a little bit more and see how it will react.
Likes
142
Share
Hi everyone :-) This week a lot of nice things happened in the flower tent :-) Everyone looks super nice, and is growing stronger and more beautiful week by week 😍👌. The blue cheese smells like a dream ;-) As usual from this variety 👍. The kosher tangie is also very, very tasty 👏🏻. Both got Pk 13/14 this week for the last time :-) Everyone else is developing very well 👍, That will be the last diary with several strains together :-) In future everyone will come individually 👌. I wish you a lot of fun with the videos, have a nice weekend, stay healthy 🙏🏻 and let it grow 😎👌
Likes
10
Share
@agricola
Follow
My good friend convinced me that trimming and training are paramount, so I've started with slowly defoliating the Creme de la Chems to try and get to lollipop status. They're just starting to flower, so I figured I could get away with a more aggressive approach. Because I failed to train these girls early, I'm stuck dealing with a little rain forest. What I've tried to do is trace each flower topped stalk up from the base, and trim away from the bottom up. 1/3 of the way up per day. I've now got a thick canopy, and I've been trying to just use leaf tucking and manual manipulation every few hours in order to keep the different height flowering sites in direct light. These ladies have really been thriving, and it's been such a joy to watch them grow! I like having two plants in one net pot letting them grow wild, but I think in my next grow I'll keep it to one per pot and train better from the start. As for the Super Orange Haze ... not as good. I attempted to pull the main branch over to train her to some empty space, but I was too aggressive and ended up popping her head off :(. First grow, first disaster. I took the head and stripped her/coated in clonex and pushed her into some potting soil just to see what would happen. There hasn't been enough foliage to really make me want to do any trimming, I've just tried to tie the stalks off to train them apart. I'm really sad about my mistake decapitation, but she seems to be doing well still. She's probably week 2 of flower based on others' journals. I changed the water midway through the week (which is when the videos were taken). I drained most of the water out, but roots prevented me from getting the last few gallons. When I refilled the res with RO, I measured the PPM at around 200. I have to assume that remaining nutrient was completely unbalanced leftovers, so feeding will have to just have to be experimental. My approach has been to give around 1:1 Gro vs Bloom and Micro every 2-3 days when I refill with RO. I want to build my PPM up to 1000, but slowly so that I can detect if I hit a ceiling first. It's hard to measure how much food is in the water based on PPM. CalMag is what drives it mostly, so I've been using CalMag as a sort of measuring stick. I keep the CalMag pegged to the Bloom food, but I know it's only good for initial dosing. I can't assume the plants are eating CalMag in the same proportion as anything else :(. If anyone has a line on cheap lab testing ... hit me up. I'd love to be able to test a few hundred samples at a time for NPK and trace so that I can tell (even if post facto) what was going on.
Likes
8
Share
Week 1 of flower for Ztrawberry by Greenhouseseedco, After the feeding she really started to get better colour, for now I wouldn't say shes stretched much? maybe an inch or 2. Have been having to run a heater at night at 27 degrees... Looking forward to week 3 strip if I don't start a little earlier. Just have to keep the tops flat now and should be easy growing from here.
Likes
12
Share
@Belverde
Follow
I really like all three pheno..I was have some problem because I was use a new led light for the first time.. But in the end of the day I'm very Happy, really happy for the result.. For the bloom I setting the timer at 12/12 light cycle.. Not 18 or 20.. And in the end they gives me some nice looking flowers.. Very stycky too.. The plants was easy to grow..i cut only the first two branches in close to the end of week four.. Anyway.. I have described exactly what happened every week if you want to learn more .. But nothing to special growing cycle.. Nice smell nice taste and nice effects, all bilancaded for me.. Sweet, candies, earthy and somntingh else.. I try it with two vaporizers and I like it(use mighty /ghost mv1) I do not talk a lot about the effect because it is subjective, and in any case I think is a quiet cannabis that can be used all day.. Even with regard to the flavor, it is always difficult to grasp the characteristic features, apart from some super obvious ones .. I speak for me of course.. In about one or two weeks I will try for the second time but in to the organic rolling paper, pure nice green joint.. Thanks for the time🙏.. Hope you enjoy 🌱 Happy end of 2019.. And good year too.. See you in another diary.. Ciao✌️
Likes
1
Share
@TTerpz
Follow
Start of week two of flower Fed with nutrients 8/10 Fed with plain water 8/12 As of 8/15: 7 more days till lollipop and defoliation.. need to feed all 3 with nutrients TODAY!
Likes
11
Share
Starting the week as usual Leaving them alone. Will add the net end of this week. Theyre doing great so far. Love the Simplicity of Athena. 5.10: pretty much end of week 5 I had to do some more LST, accidentally splitted the already wood like stem on the BBc, Lob #2 standing out. Lob #1 had some PH issues but is hopefully back on track as I adjusted the Ph and gave her a Calmag shot.
Likes
17
Share
Plant has been steadily growing. Picking up pace. Still not as much as I'd like. The uppoting was a bit of a let-down. I was expecting to see much more root development which would of sped the process adapting to her new pot. But, looking at it. I know. I'll have to focus on roots for the next 10 days or so. And then I'm hoping to see much more rapid growth like I was before I uppoted. Week 2 Days 22-28 Days 22 Uppoted to a 9L on Day 22. Was pretty straight forward and easy. Day 23 I removed the 1st fingered leaves/nodes as there was no stress signs so I want her to start pushing the nodes up above once she has her week of root growing. As she won't grow much until she's settled. Added 350ml of Silica/Master root/Enzymes ph'ed to 6.7. Days 24-2 Days 24-26 She's doing well in her new 9L pot. Not craving for food atm. She is only in fresh grow mix a few days. I did add another dose of Enzymes&Master Root ph'ed to 6.7 Days 27-28 D27 She is finally setting into her pot. I added 300ml of Enzymes/Master Root ph'ed to 6.7. I rotated the pot and show the other side of the stronger ppf. Soon I will higher the lux from 13-15 Average I will change it to 18-25. D28 Update: She's showing slight twists in the leaves. Hasn't grown much. I'll wait a few more days. But, if I don't see rapid growth in a few days. I'll have to explore options. Thanks to Plagron/Zamnesia for the products. 20% off Zamnesias entire catalogue of breeders with code: ZAMMIGROW2024 20% off XPERT NUTRIENTS & KANNABIA with code:
Likes
9
Share
Day 35 is here. We are a week into flower and most the plants are just starting to hit that flowering stretch. I have been bending them down a little every couple days, but I need to focus on cleaning up some of the bottom branches so we can keep good air flow through the plants. Will work on that through this next week. I haven't done a water change, just been topping off the reservoir with fresh nutrients as they drink it up. Feeding half and half maxigro and maxibloom. Will cut out the maxigro in a couple weeks when I notice their stretch slowing down. I had a plant overflow this week because the drain line is getting full of roots. I noticed a couple roots have made their way into the reservoir already. I set a pump timer to 1 minute on and 20 minutes off so they can drain properly. I would like to make it through the grow without having to mess with the drains, but we will see what happens. I will make some modifications if needed. Other than that everything is running smooth and I hope we have some little pistils to show by next week. Thanks for stopping by ✌️
Likes
9
Share
@garchol
Follow
We successfully completed week 8 and things are starting to get interesting. The buds have grown significantly in size over the last days and the smell has gotten much stronger. I think I also need a new air filter… The leaves did some coloring in the past week which makes this beauty look even more handsome. I optimized the air intake of my tent this week by replacing my one 100mm tube with two 130mm 3d printed light traps so breathing is much easier now and the vent can run a bit less fast.