Buds growing fast (fastbuds) lol, so far so good, no major problems as of yet, counting the days now roughly about half way there! Getting a nice smell from both plants now😬👊🏻.

Week 5 begins for Mandarin dreams and Divine storm. All four ladies look happy and healthy with minor deficiency signs. All four are bulking up and frosty as my windows (it's -21 °c)! The Mars-Hydro TSW2000 is performing awesome, very happy with it. Thank you Kaoritracy for hooking me up! Thanks for stopping by growfessors 👽🌳💚

7/20 Went over this morning to plants soaking wet and heavy rain. Went back around 4pm and plants actually look really good. The rain has stopped for a bit and the girls looked great. Apart from some septoria leaves I needed to defoliate on the first plant I treated. I also noticed a few others on other plants so it's spreading albeit slowly. I treated the three in the middle with their second dose of Plant Doctor at 3tsp/1gal. One gallon administered to each plant via root drench. I think I may treat the other plant showing signs with a diy Dr. Zymes using citric acid as the active ingredient. That way I Gould start treatment right away without having to rely fully on plant doctor. Plus it would kill any pests. Ive seen damage but the birds do a number on them. I dont want to spray my plants with a bunch of chemicals if I don't have too. I shouldve replaced the pallets and cleaned the cage better. I think I did a good job sanitizing as I have no wpm. Just this septoria I probably got when the lady mowing the lawn cut all tjis fucking grass and blew it in my pen, throwing bird seed and I'm sure tons of disease into my grow bags. I literally had to harvest a bunch if fucking sunflowers. It looked like my plants had been mulched. Just with small disease carrying shrubs. At some point some of this stuff has to be on purpose. You CAN'T be that stupid. A couple kushes in the back look hungry. I think I may need to up my feed. I've written to much. I'll keep this updated. Thanks if you made it this far. 7/21 I guess it rained last night. Oh well. It was blue skies for hours before dark. It must've rained late/early morning. I'm sure the app of plant doctor will be fine. Like I said I'm considering using citric acid as a foliar spray to help with the septoria and clean up any pests. I don't have enough pests to warrant spraying. I just don't want to put all my eggs in the plant doctor basket. Today is overcast and windy. The wind has really assisted in spreading this virus. I remove anything I see infected immediately and since these plants are reveges they have plenty of leaves. Plants are really stretching. I know I talk about the septoria a lot but realistically if someone looked through my garden they'd have a hard time spotting it. I don't want to exaggerate the problem but I don't like dealing with ANY fungus or molds. 7/22 It was 55° this morning when I went over. I defoliated some septoria leaves and a few that were fading or damaged. I saw almost a whole leaf eaten so it's probably a good idea to move forward with citric acid. I can add that to the plants I've already treated with plant doctor. This is the first year it's been so noticeable. It's the reveg 10th planet that started this off. Oh well. I've dealt with MUCH worse. Plants LOOK good (other than septoria leaves (on bottom of plant). Today is water day for me but it's been raining and it's a lot cooler today. Bags still had weight to them. I want them to have a proper wet dry cycle. Temps top out at 75° so I'll monitor during the day and if something NEEDS WATER I'll give it to it. I'm suprised I have ZERO WPM. The septoria is much more identifiable but pm is usual present in these conditions bur I don't have a spot of it. I may do some defoliation today. I also need to add supports for flowering but one thing at a time. EDIT: Went over around noon. 70°. Bags seem to be holding weight (it was easier to tell as ONE plant was substantially lighter than the rest) so I decided to hold off on watering. At least until tonight. There are three plants (at least that are going to NEED water). They look phenomenal now though and we've had lots of rain. Plan is to go over later and get the light ones and mix the water for the others so I can administer it in the morning quickly. I have an early doctor's appointment but I don't to overwater or water unnecessarily just because. But when you grow alone sometimes you need to do things when your able. I have people there that would help if I asked. And I have before but its late . I'm very grateful. I defoliated quite a few septoria leaves. They were all from the bottom of the plant. A couole wete bottom interior. I know there are worse things to contend with but still a pain. EDIT #2 WENT BACK AT FOUR AND PLANTS LOOKED FANTASTIC AND STILL HELD WEIGHT. THE REVEG MK ULTRA IN EARLY FLOWER "MAY" HAVE STARTED TO DROOP AND "SEEMED" LIGHT. THE LARGE SPECIAL KUSH FUETHEST IN FLOWER BY THE DOOR WAS ALSO EXRRENELY LIGHT. I HAVE AN EARLY DOCTORS APPOINTMENT BUT DONT WANT TO OVER WATER MY PLANTS JUST BECAUSE IM IN A HURRY. ITS COOLER THIS WEEK. 70 TODAY AND HIGH OF 80 TOMORROW BUT DAD SAID THATS NOT UNTIL THE AFTERNOON. I MIXED UP ENOUGH WATER TO WATER EVERYTHING IN THE MORNING IF IT NEEDS IT. I HAVE AN IMPORTANT DOCTORS APPOINTMENT EARLY THAT WILL TAKE ME AWAY AND IM FEELING A LITTLE ILL SO I WANTED TO GET DONE WHAT I COULD TODAY. WATERED THE TWO THAT NEEDED IT WITH TWO GALLONS A PIECE (30GAL REVEG MK ULTRA AND THE BIG SPECIAL KUSH IN FRONT I DIDNT TOP THATS FLOWERING THE FASTEST. EVERYTHING ELSE CAN WAIT. 7/24 Surprisingly the plants still held weight this morning! The looked pretty good too! However its going to be highs in the 80's for the next 7 days. Since the plants still had some heft to them I watered everything just a gallon. I gave the 10s a half gallon and skipped the 50gal container plant. I think this is a good happy medium. I'm still seeing random septoria leaves but still no WPM. I defoliate daily sometimes a couple times. I need to get a minute to myself and add a foliar spray. I'll start with a dih Dr. Zymes while I'm looking into other products like bicilus (i have bt but its a different bicilus) or trichodermia. I need to feed sometime this week too.

ok so this plant, im not sure when im going to need to harvest this. just like my gorilla glue, this started flowering early, and before i noticed since this is my now second plant ever to harvest. and really i still feel like its my first i didnt take anything away from my gorilla glue and i was really unhappy with the product i didnt know when to harvest it so it smells like nutes not bud. so if anyone has some suggestions on what i should do for harvest and when id appreciate it. im going to start flushing it the next couple of feeds so i can prevent the nute smell i got.

I believe I couldve done better with this strain. I shouldve fed veg nutes earlier and payed attention to ph but i didnt have my ph pen until later in the grow. All in all though shes super frosty. Responds better to training rather than not. Takes about 4/5 weeks to veg and she couldve done 9/10 weeks of flower but i chopped at 8. Started trimming and drying on 4/3 and didnt finish until 4/7. But some of the early chop will be dry in the next couple days

Haben zum Glück aufgehört zu strecken, seit Tag 10 auch die Under Cannopy dazu geschaltet… Perfekter Strech, bin auf die Blüten gespannt 💪🏽

week 5 was great. she really focused on getting fat this time. and shes been getting soooo frosty. the camera really doesnt do her justice. also she use to give off a pretty strong kush smell when i would water her but i noticed she hasnt been giving ANY smell recently. She does however smell very strong when i squeeze her nugs and smell my fingers. she has a very strong lemony smell with a hint of a kushy gassy smell. Every 2 days ive been giving her a gallon of dechlorinated tap water phd to 6.3 ph with 2 tsps or 10ml of dyna groom bloom nutrients.

Good week so far. 😎 Ups and downs,but learning tons along the ride.🤓 The plants are responding well to the flushing (yes flushed again) color is much better and just the general appearance looks good after 2 days. 💪🌱💪 Lst seems to have been received well, no extra stress to these girls. 🙏 Will continue to update with pics and vids throughout the week.

Questa settimana è successa una cosa bruttissima, si sono tappati i fori di scolo di un vaso, e quindi una pianta (ovviamente la piu bella) é rimasta senza ossigeno alle radici formando così marciume radicale, ho provato a fare un lavaggio di radici con acqua e acqua ossigenata al 3% e trapiantato in terra, così da somministrare una cura apposita, aspetterò 2 settimane se nn vedo ripresa ahimè la abbandonerò. Invece le altre come potete vedere dalle foto stano crescendo alla grande, 3 settimane dallo swith gia si sono formati tanti fiori, ora bisogna solo farli

She was to tall😂

The plant continue to grow incredibly strong and fast from now on I well slow down on grow nutrientes cuz the leaves are very dark green and we are well into flowering meaning they don't need that much not nitrogen anymore. Thank you for reading I will continue to update have a happy grow.

This was a great grow under the Unit Farm UF2000 light. Was a great yield for 100 watt light. Thank you again UNITFARMLED_justin. There will be more Unit Farm grows in the future. I will be conducting a photoperiod grow with a UF4000, and the UF2000 in my photoperiods room once my current grow is completed. The flower is very tasty, and potent as it has been in past. Thanks again grow diaries community for the likes, follows, and subscriptions on my YouTube channel. I greatly appreciate the support. Happy growing, and be safe out there 🤜🤛🌱🌱🌱 Ps I named this girl Gretchen, she has a sister plant named Ingrid for those who know where Ingrid is. 🤣🤣🤣

Ich denke die 2 Bruce Banner und die Critical kommen noch. Die sehen prächtig aus.

This is more like the end of week 3. I will be topping tomorrow.

Did a bit of loli-popping and some defoliation on the little guys. They are moved into the new tent and adjusting nicely! Next week my NEW MARS HYDRO LIGHT! should be here and I'm pumped for that! I think theses are gonna be some big girls!!! PH 6.1 and PPM was 1220/550 (yeah! got a ppm meter!) _______________________________________________________________________ I got my new Marshydro light installed! Its fantastic and after work the first night it was AMAZING to see how the plants had perked up for it!!! Its a very nice study light and totally makes me feel better about having a bigger light!!! The ladies are having a bit of trouble but I still think things are gonna be just fine. I'll put some pics up of the trouble next week __________________________________________________________________________ I took em out for a water and realized how much sparkly they are getting! There are some ugly leaves and the plants are a shade lighter green than i want, but really things are going nicely! I gave the small plant a little booster stand and its canopy is now level with the others but its like 2 weeks behind I feel like. definitely frustrating having 1 plant lag behind the others but it is what it is!

During the harvest I've collected lot of trims. I think this genetic will be great for extractions. I've dried all the buds in the tent at 50%rh, 23°C with indirect ventilation for three weeks. Now are curing in a dark room at 21°C inside a jar with a 58% Boveda. Thanks to everyone who followed and liked this diary! I hope you enjoyed 🙏

Chopped her two days into week 14. What else. Buds. There are a lot of them. And they are quite large. And they look like they will require little effort to trim. What more can I wish for? I am a very happy man. Upd 1: Trimming is SO SIMPLE! Not much sticking out to begin with, because of the amazing bud structure and me plucking most bud node fans. Solid nugs which are not bothered by anything, so pulling smaller sub-bud fans is very simple too, while the buds are what I would call moist. I'll call this Moist Trim 😄 ✂️✂️✂️ Went for the best trimming tools available on the market (well at least my research concluded so) and LOVING every minute of trimming with the B-500SRF. Why would I or anyone else use something less suitable or less comfortable for such a delicate and long job is beyond me, except if you cannot afford one right now, in which case I wish you to experience it one day. Fiskars are also very good in therms of the blades, coating and cutting ability and precision, but the spring is just too stiff, like way, way to stiff for something that is to be used for hours on end. One might argue that such spring force helps overcome resin buildup, but please just rinse your instrument regularly in an appropriate solvent (ethy, iso, whatever — consider you instrument materials as well) and wipe it after. Why would you let significant amounts of resin to accumulate on such a gentle and precise tool? Kinda defeats the purpose?

This week was quite cloudy with some rainy days. I increased the Bio-Bloom dosage as advised by the manufacturer. The buds smell really good now :)