Likes
Comments
Share
Hi everyone 😁 I would like to thank you all fellow growers and breeders for such a great support on this journey. Thank you Grow Diaries and Green House Seeds. Without you all this wouldn't be possible. Love you all First ever recorded diary so don't know where to even start 😅 I am returning to growing after many many years of break. This is my first ever experience with autoflowers, scrog, lst, led and such tiny grow space. Choice of strain - Big Bang Auto from Green House Seeds. I have run so many strains from this seed bank in the past and I was always happy with the final outcome. Was looking for indica dominant strain, fast flowering cycle and very important heavy yields on small spaces. Again thank you GHSC in very happy of choosing this strain. Little bit about my cabinet. External dimensions: 64 x 50 x 114 cm (W x D x H) Growing area: 55 x 47 cm cm (0.26 m2) Panel based on SAMSUNG LM301B diodes Spectrum: Samsung LM301B – 5000 x72 Samsung LM301B – 3000k x136 Samsung LM301B – 660nm x9 Samsung LM301B – IR 760nm x1 Regulation in the range of 20W - 110W - Meanwell XLG 100-H-AB PPF 300 umol/s PPFD 890 mol/m2/s @30c Total of 6 adjustable fans, 4 exhaust fans 4 modes - silent/drying, vegetation, flowering, full power Active carbon mass in the filter 2kg Absolutely love my grow cabinet. Thinking of next build already. My grow 3 beautiful ladies - Nuna, Luna and Sweet Mary Jane. This was a pleasure experience growing autos for the first time. All 3 ladies on the end developed perfectly. Nuna, left corner lady- tall and beautiful. She had some problems to switch to flowering and was even considering removing her but very happy that I was patient enough and turned great. Luna, right corner lady - have to say she is the queen. She has the most heavy buds from all, the most. colorful. Her wet weight was 420g, can't say how much of dry but guessing approx. 100g Sweet Mary Jane, front seat lady. I think she was the most pleasant to grow of her location but due to no other spare space for drying I belive that I have harvested her at least a week to early. If keep longer I belive she could be the most yielder from all 3. Thank you all for all the support, help, comments, likes, messeges. Love you all 💚💚💚 Will update this diary in some time and when puff perfectly cured 😎 Peace and love ✌️💚
Likes
8
Share
Likes
4
Share
Topped this girl this week. Growing pretty good so far. I’ll be potting up to 3 gal pots next week sometime. I also have a Bison Brew that I’ll be using sometime after transplant.
Likes
2
Share
At this point she was drinking more then 4L a day and due to the root mass that was about all i could fit in the res at the time so I had to mock up a external res and convert the system to RDWC K.I.S.S.
Likes
62
Share
@Chucky324
Follow
Hello. I've harvested the Mega Mouth. WOW!!! I'm very impressed with this strain. Over 1.5 k for 5 plants. and it was finished by Aug 20 with the tents help. I'm trying some new (for me) categories to add to my report. Plant Stretch (PS) 1 to 5- 1 is hardly any stretch. Bud Mutation (BM) 1 to 5- 1 is a beautiful normal bud- 5 is big weird growths like foxtails. Trim- How easy or hard it was to trim up 1- you blow on the branch and hang it up. 5- Is very hard to trim takes a long time. About- Best guess on the THC % (I've been smoking a long time) Resin- 1 is super slippery 5- is very sticky like Gorilla Glue. Size of Buds (SOB) 1- is very small 5- is the biggest buds Dense- 1- is the lightest or fluffiest 5- is the rock hard buds your bud buster has trouble busting up. Plant #1 Wet Trim 1647 g PS. 3.5 BM 3.5 Trim 4 About 21% Resin 4 SoB 4 Dense 4 Finished Dry Weight 289.5 g or 10.33 oz. Plant #2 Wet trim 1606 g PS 3,5 BM 3.9 Trim 4 About 22% Resin 3 SoB 4.7 Dense 4.3 Finished Dry Weight- 302 g or 10.78 oz. Plant #3 Wet Trim 1635 g PS 3.7 BM 3 Trim 2.8 About 20% Resin 2.8 SoB 3.7 Dense 4.5 Finished Dry Weight- 314 g or 11.21 oz. Plant #4 Wet Trim 1753 g PS 2.5 BM 2.5 Trim 3 About 22% Resin 4 Falls off easily- Clumpy Dense 2.5 Final Dry Weight- 343.5 g or 12.26 oz. Plant #5- Wet Trim 1787 g PS 3.5 BM 3.7 Trim 3 About 24% Resin 2.5 Dense 2.5 Finished Dry Weight- 355.5 g or 12.69 oz. The taste is sweet and smooth to go down with a nice balanced buzz. There was some pests around. I found thrips damage in veg and got some Spinosad to take care of that. Saw some fungus gnats around but they didn't do much damage. Easy to grow and trim. This is a recommended strain. Chuck.
Likes
16
Share
@Chubbs
Follow
What up grow fam. These 3 finally got the chop. Wow do they smell pungent. The flowers came out nice, not to dense but neither airy. The wet weight for these came out to 912g. To say they're coated in frost is an understatement looking like a winter wonderland.
Likes
4
Share
@Ryno1990
Follow
The Rhino Ryder from @fastbuds is coming along really nice starting to get some buds popping up all over the Strawberry gorilla from @fastbuds is starting to come back from it being stunted for some reason think it mite of been locked out because she definitely doesn't need nutrients that much had to cut her feedings in half to stop nutrient burn
Likes
9
Share
@McGrowin
Follow
Day 42 | #1 is developing well | #2 is doing best | #3 is a runt | Lots of trichomes on #1 and #2 Lots of catching up to do for #3 Harvest expected by Halloween
Processing
Likes
2
Share
@Belivitez
Follow
Maybe this is last week for this plants 👌
Likes
170
Share
Bonjour à tous les padawans et les maîtres jedis Jour42 ma plante entre bien en floraison je pratique sur elle une defolliation pour permettre aux têtes de prendre la lumière La floraison des plantes de cannabis La plante de cannabis passe par différentes étapes de vie avant de parvenir à la récolte. Ces étapes sont : la germination, la pré-croissance, la croissance et la floraison. Pour les autofloraisons il n'est pas nécessaire d'avoir de changer le cycle de lumière elle entre en floraison automatiquement voilà d'où elle tient son nom "d'autofloraison" L'origine de l'auto-floraison vient de la sous-espèce "cannabis sativa ruderalis" , qui à l'origine produit de très faibles niveaux de THC. C'est en croisant cette variété de marijuana avec d'autres qui produisent des niveaux de THC plus élevés qu'à vu le jour ce magnifique compromis que sont les variétés auto-fleurissantes avec des taux de THC très satisfaisants. En parallèle, cela a permis d'améliorer la production de ces variétés, qui initialement étaient exceptionnellement basse. Pour des résultats optimaux, en culture Outdoor (extérieur), je recommande que la germination des graines de marijuanaAuto-flo se fasse entre avril et août. En culture Indoor(intérieur), la photopériode idéale que ce soit pour la croissance comme pour la floraison est de 20h de lumière. N'oubliez pas que ces graines ne sont pas tributaires de la photopériode pour passer en floraison. Il est préférable d'utiliser des pots d'une capacité de 10 à 20L dès le début, étant donné que leur cycle de vie est réduit, les auto-flo n'ent pas besoin de plus de volume pour se développer. Vu sa petite taille (et la discrétion) elle fait l'objet d'un bon choix pour la culture de cannabis sur balcons. La première variété de Lowryder auto-floraison a été créé à partir de cannabis indica sativa croisé avec des génétiques de cannabis sativa rudelaris par la banque de graines de marijuana "The Joint Doctor". Puis vinrent la White Dwarf de "Buddha Seeds", la Roadrunnerde "Dinafem", l' Auto Stoned d' "Autofem", la Speed Devil de "Sweet Seeds" , la Maxi Gom de "Grassomatic", la Flash, la Gnomo de Kannabiaet bien d'autres. Jour42 defolliation (video) Avant toute chose n'oublions pas de bien désinfecter ses outils et bien ce laver les mains. Quesque la defolliation ? LES CULTIVATEURS AMATEURS, PRENEZ GARDE, MAIS NE PRENEZ PAS PEUR La défoliation consiste à retirer les feuilles des plants de cannabis en intérieur afin d'accroître le rendementfinal. Le cultivateur amateur doit faire preuve de vigilance lorsqu'il commence à appliquer cette technique de taille. Malgré le débat sans fin entre ceux qui prônent cette technique et ceux qui la dénigre, il n'y aucune raison pour qu'un amateur ne s'y essaie pas afin de voir si ça lui convient ou non. COMMENT DÉFOLIER Que vous tailliez les feuilles ou les branches des plants de cannabis, il vaut mieux utiliser un sécateur stérile qui est confortable en main. Arracher des feuilles à la main manque de finesse et engendre souvent par accident, l'arrachement des couches d'une tige en plus de la feuille. L'objectif principal de la défoliation est de permettre une meilleure pénétration de la lumière et de promouvoir la production de plus grosses têtes. Les feuilles éventails qui font de l'ombre doivent être retirées. Tailler la tige principale et/ou les pousses secondaires n'est pas de la défoliation. La règle d'or lorsque vous donnez à vos plantes un rafraîchissement est de commencer avec les feuilles nourricières les plus grandes et les plus larges, en taillant du bas vers le haut. Il est important de retirer les feuilles stratégiquement et non pas au hasard. Pensez également qu'il vous faut limiter votre rafraîchissement à approximativement 10 à 20 % des feuilles totales de votre pied. Il est très facile de s'emporter durant la taille et de se retrouver avec des plantes chauves. Un excès de taille de feuilles empêchera la photosynthèse et paralysera vos plants. QUAND FAUT-IL DÉFOLIER Il est assez rare d'appliquer la défoliation comme seule technique pour obtenir un fort rendement. La taille des feuilles est généralement associée à d'autres méthodes de tailles et de palissage pour un meilleur rendement telles que le topping ou étêtage, le FIMming, le LST, le manifolding, le supercropping et le ScrOG. Les cultivateurs utilisant la méthode ScrOG auront besoin de retirer toutes les croissances inférieures ainsi que les feuilles et les tiges se trouvant sous le filet. Les plants de cannabis peuvent être défoliés dès lors qu'ils sont passés de la phase de plantule vers la phase de croissance végétative. Cependant, il est recommandé aux cultivateurs amateurs de laisser aux plantes 1 à 2 semaines de croissance végétative avant de s'attaquer à la défoliation de celles-ci. De plus, certaines variétés sont plus sensibles à la taille que d'autres et de ce fait, seront plus stressées par la taille des feuilles. Surveillez minutieusement le comportement de vos plants après la taille. Une période de convalescence de minimum 3 à 7 jours avant de recommencer la défoliation est fortement recommandée pour éviter trop de stress aux plants. Les cultivateurs peuvent également défolier pendant la phase de floraison, ce qui permettra à l'énergie de la plante d'être concentrée vers la production de têtes tout en limitant l'ombre et l'excès d'humidité. Néanmoins, il est important de ne pas défolier trop tard sous peine de simplement blesser ses plants inutilement. LES AVANTAGES DE LA DÉFOLIATION Évidemment, l'avantage numéro un de la défoliation, c'est l'augmentation du potentiel de rendement de cette technique de taille pour tous types de cannabis allant de la photopériode aux variétés autofloraison. Ce n'est pas un secret que les fleurs qui reçoivent plus de lumières deviennent plus grandes et larges que celles dissimulées dans l'ombre des feuilles. De plus, retirer les feuilles intérieures des plants touffus aide à prévenir toutes menaces de moisissure. Les plants très feuillus avec un feuillage intérieur dense produiront une quantité importante de têtes pop-corn. Dans le pire des cas, les branches de têtes et les têtes qui sont denses succomberont au pourrissement. Si vous observez des gouttes d'eau se former sur la surface des feuilles, il est grand temps de penser à faire de la défoliation. Libérer la zone inférieure et médiane des feuilles est un excellent moyen d'améliorer la circulation de l'air. LES DÉSAVANTAGES DE LA DÉFOLIATION Les plants de cannabis en intérieur bénéficient de la défoliation pour deux raisons. La première est parce qu'ils reçoivent la lumière d'une source stationnaire au-dessus d'eux, et la deuxième est parce que les conditions environnementales sont contrôlées par le cultivateur et non Mère Nature. Les plants d'extérieurs eux, n'y gagnent pas beaucoup, car les cas échéants se vérifient pour eux. Le soleil traverse le ciel, illuminant sur sa route, différentes portions de la plante de son lever à son coucher. Les cultivateurs en extérieur n'ont pas besoin de manipuler les plantes afin qu'elles se développent en adoptant une structure plate puisque le soleil est infiniment plus puissant que n'importe quelle lampe de culture et qui plus est, il est toujours en mouvement. Tailler les feuilles des plants extérieurs les rend également plus vulnérables aux conditions humides et brise leurs barrières naturelles contres les nuisibles. De nombreux cultivateurs d'intérieur peuvent, et malheureusement, c'est souvent le cas, réduire le rendement final à cause d'une défoliation faite au mauvais moment et/ou excessive. Tailler les plantules n'est pas conseillé et engendre souvent des plants nains. Scalper les plants matures est encore pire, et au lieu d'obtenir de longues branches de têtes, vous obtiendrez probablement encore moins de fleurs. De même, tailler des plants malades ou en mauvaise santé à n'importe quelle période de la croissance risque de paralyser la croissance plutôt que d'encourager la formation de fleurs denses. Jour44 Arrosage une fois sur 2 topmax de biobizz Jour46 arrosage avec de l'eau ph6.3 à laquelle j'ajoute 0.8g par litre d'eau de feeding enhancer greenhouse. Jour47 léger arrosage. Jour48 léger arrosage
Likes
7
Share
Did some more defoliation this week and gave some nutrients.They are looking happy and healthy still in vegetation stage but soon I’ll switch the light cycle.I added a scrog net and will clean up the bottoms tonight as I’m ready to switch to flower soon.I want to keep them smaller if possible in the short 3x3 60 inch high tent they are in atm with a spider farmer sf1000 light 100 percent power.Also have a Co2 bag hanging and hopefully adds a little more growth during the early flowering weeks.
Likes
17
Share
Week 1 Day 1 - 8/12/2023 1st Water change Day! Such a special time it is when you remove the little bit of Nutes that you gave them as an appetizer and you give them their first real meal. Added 39 Gallons of Water to my system SILICA= .5mil/Gal = 19.5 = 20mil Root Drip = 1mil/Gal = 39mil Cal Mag= .25mil/Gal = 9.75 = 10mil FLoraMicro= 3.0mil/Gal = 114mil FloraGro = 2.0mil/Gal = 78mil FloraBloom = 2.0mil/Gal =78mil ORCA= .5mil/Gal = 19.5 = 20mil Week 1 Day 2 - 8/13/2023 Everything is looking good the roots are making their way to the water and the new grow is looking nice and green. Week 1 Day 3- 8/14/2023 Everything is right on track, they are looking beautiful and in the praying position all leaves happily lifting towards the light. Week 1 Day 4- 8/15/2023 A little worried today her birth Twin the BA I am growing out is looking great and is raised towards the light and this one is just slightly under.. Will keep an eye on Her. Week 1 Day 5- 8/16/2023 Walked in and the humidity was under 60.... ohh noooooo.. So I added 2 humidifiers to the tent and attached them to my InkBird controller which is set to 62. Also looking at the roots and she has some poking out the bottom but just not in the water yet.. Luckily we are set for 14 days before next water change so the system will stay stable and her sister already has roots in the water so she should only be a day or two behind.. we will just keep tracking but she is delayed. Week 1 Day 6- 8/17/2023 Roots in the Water!!! Huston, we have a successful launch. This grow is on! Humidity was a little low this morning so I refilled the humidifiers. Other than that the temp looks great, the PH looks good, the PPM looks good the plant is in the praying position and all damage from the little drowning from over filling the cloning machine seems to have been fixed. Happy Happy. Week 1 Day 7- 8/18/2023 Yay.. week 1 in the books, roots in the water growth has started. Everything for growth and environment is looking good and on track, there are a couple of mutations with this Lady will keep an eye on those leaves. IMO this grow is going A lot during this week 1 then week 1 of the last grow when I had them drowning. Really excited on how this grow is going to come out.
Likes
4
Share
TODO VA GENIAL, MUCHISIMA RESINA Y OLOR EN ESTA ETAPA. HE NOTADO QUE ALGUNAS HOJITAS SE ESTAN QUEMANDO EN LAS PUNTAS Y DOBLANDOSE HACIA ARRIBA, SUPONGO QUE FUE DEMASIADA COMIDA. DE TODOS MODOS ES MINIMO, NADA DE QUE PREOCUPARSE POR EL MOMENTO, VOY A HACER DOS RIEGOS CON AGUA Y LUEGO VOLVEMOS A FERTILIZAR!
Likes
22
Share
@m0use
Follow
***Sponsored Grow*** = Medic || https://medicgrow.com || Grow = ***Sponsored Grow*** Plants still looking good from last week, the yellowing has seemed to stop spreading, still some dull green in some leaves, I think I was under feeding them, but runoff says otherwise. Noticed some more pink/purple stems on the plants and decided to increase the phosphorus content in the feed by mixing in half grow and half bloom from the nutrient lineup. I'd use the PK booster I have but its to high in K for my liking. The entire lineup is very high in K. mixing grow and bloom gives a NPK ratio of 7-7-14 then done 1:1 equal parts. Grow=8-4-15 Bloom=6-10-14 Boost=1-15-30 Run off was a bit high for my liking but only seeing minimal signs of nutrient burn. Still watering once with feed and runoff and then later in the week with water and no/little runoff for my watering cycle.The number in the nutrient section are wrong but the EC and ratio are correct. Also impressed the roots have started popping out the bottom of the container already after only being transplanted for a week. Good root growth on these ones. Lights doing well. The V1 spectrum is good on the medic grow mini sun-2's 240w. No issues so far, dimmed at 80% . Till next week. ***Sponsored Grow*** Official Website: https://medicgrow.com/ + https://www.kannabia.com/en Facebook: https://www.facebook.com/medicgrowled + https://www.facebook.com/kannabiaseed/ Twitter: https://twitter.com/medicgrow + https://twitter.com/kannabiaseeds Instagram: https://www.instagram.com/medicgrow420/ + https://www.instagram.com/kannabiaseedsint YouTube: https://www.youtube.com/channel/UCNmiY4F9z94u-8eGj7R1CSQ + https://www.youtube.com/c/KannabiaSeedCompany Growdiaries: https://growdiaries.com/grower/medicgrowled https://growdiaries.com/grow-lights/medic-grow + https://growdiaries.com/grower/kannabia https://growdiaries.com/seedbank/kannabia
Likes
7
Share
Transplanted from 0.25 to 1 gallon pot This is the first transplant of two. I will let these build.a root ball for 3 to 4 week and then do the final transplant into a 7 gallon pot. Installed blumats as well for irrigation. Crover crop added
Likes
2
Share
@Ninjabuds
Follow
My Strawberry Gorilla seedling is looking healthy! The leaves have a vibrant deep green color, which is always a good sign. They also have a nice curve to them, almost like they're reaching up for the light. I'm excited to see how this one develops. The genetics on this strain are top-notch, so I've got high hopes for some seriously frosty buds down the line. Stay tuned for updates as this little lady grows! The weather has been absolutely gorgeous this past week! We've been hitting that sweet spot of 70 degrees during the day, perfect for getting outside and soaking up some sun. Then, it cools down to a comfy 50 degrees at night, which is ideal for sleeping with the windows open. I've been loving all the fresh air! I finally got around to building that little wooden planter for my windowsill. It was a fun project, and now my regular plants have a nice new home. It really brightens up the room, and I'm thinking of adding some herbs to it soon. Maybe I'll even try growing some basil!
Likes
9
Share
@Medgrow93
Follow
Flipped to 12/12 a couple of weeks ago but the flowers are just now starting to form. One of the plants turned hermie out of nowhere, I really don't know what happened. Also the lower leaves are turning yellow and I think it has something to do with the pH because I think I added too much calmag but other than that they're doing their thing.
Likes
12
Share
@yd_grows
Follow
Plantas continuam crescendo e flores engordando. Ainda não parece necessário alimentar as plantas.