Likes
Comments
Share
@Salokin
Follow
Hi growmies, another try to update this diary. She is developing nicely, however is to big and has light stress I believe.
Likes
10
Share
These girls need to be transitioned to my out building in the grow tent but I'm having trouble getting humidity up I haven't warming with a small space heater but I can't get my humidity up so not putting them out there until I fix that hoping I still have a couple weeks Now in tent out in barn..Spider farmer SE7000 is in place..I set power down to 25% for my seedlings and I have about 18 inches from panel. Anyone who has this exact light please chime in...
Likes
7
Share
The stretch has definitely begun. No issues whatsoever. I turned the lights up to 250W and bumped the PPM to 950. Thinking about adding another LED to tent - these things are going to be out of control! The GSC in the 64L res is almost exactly on the same schedule as the 1L, which is 5 days older. the 1L is obviously in the lead in terms of size, but the 64L isn't far behind. I honestly think they'll both end up being almost identical...
Likes
5
Share
11 June - week later from last update. Girls doing great. Noticed ants nest rite under couple of girls soil and small amounts aphids(black). Foliar Spray them mix of neem oil, baking soda and dish soap. Ordered some ant bait station for kill them. Feed girls with seed sprouts tea, alga grow, sea weed and home made cal-mag.
Likes
7
Share
Moving along nicely and growing entirely different than each other as the shorter mystery strain is much more bushy.
Likes
5
Share
Eccoci qui... Ormai manca davvero poco ci siamo quasi.... Ora niente pi霉 fertilizzanti solo acqua ed attendiamo la maturazione.. Seguiranno aggiornamenti, grazie a tutti per il supporto馃敟馃尣鉂わ笍
Likes
1
Share
@Kraken85
Follow
Probl猫me d intracteur d' aire , Obliger de le lancer une fois en route. il 脿 fait son temps 12 ans, tourne av du mal , 脿 changer. Rin莽age en cours.
Likes
3
Share
Likes
11
Share
@Farmer1
Follow
it continues to grow without problems despite the heat wave with beautiful ramifications, can't wait to see what's next. Last transplant in a week 馃槑馃尦
Likes
6
Share
No watering today, soil still a little to moist for my liking. Will probably water with fert when I do though. Raised the netting and rotated the pot so i can continue my SCoG. thats all for this week. Any info or tips always appreciated -
Processing
Likes
7
Share
@Ruuddata
Follow
#Crop King Seeds Planting 3 Seeds Using 2 Different Techniques to germinate the Seeds - The First 2 Seeds were germinated (Jul 2nd) using the water / paper towel technique * The seeds were dropped in a half glass of bottled water (It stayed afloat) and kept in a closed dark area. * After 12 Hours the 2 seeds were pushed down to reach the bottom of the glass using my finger. * After 24 hours the 2 seeds were transferred / Now using the paper towel method to complete the germination - The last seed was germinated (Jul 3) using just the paper towel method * This method took longer to break the seed surface. On Jul 6 Decided to transfer all 3 seedlings into the Aerogarden. * Seed G1 had about 5cm roots. Some flowers already sprouting * Seed G2 had about 3 cm roots. Still had seed top. * Seed G3 had only just cracked . No length
Likes
2
Share
Que pasa familia, vamos con la tercera semana de floraci贸n de estas Gorilla Cookies Fast Flowering, de FastBuds. Agradezco a Agrobeta todos los kits obtenidos de ellos 馃檹. Hasta aqu铆 veis que llevan buen progreso y el color que se marcan es espectacular. Vamos al l铆o, el ph se controla en 6.2 , la temperatura la tenemos entre 22/24 grados y la humedad ronda el 50%. El fotoperiodo a 12-12. Est谩s pr贸ximas semanas veremos c贸mo avanzan. Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Hasta aqu铆 todo, Buenos humos 馃挩馃挩馃挩
Processing
Likes
1
Share
so week 11.. The gorillaz are carrying on beautifully, however I realised having 5 plants sharing one reservoir is now quite a bad idea.. 2/5 of them look to be well into flower, fattening up and some tri's starting to turn cloudy but look like theres still plenty of fattening up to do. The other 3 are now just beginning to fully pistil up so will still be requiring flowering nutes when I should be beginning a flush on the other 2.. any comment or advice on this would be greatly appreciated!? The Stardawgs have basically grown into tennis balls. Such a vast majority of bud sites all the way down look so much larger than I could ever have hoped and i've had to tie some of the buds to the main colas!! I will Be starting the flush this week as most Tri's are now cloudy i'd say around 4/5 currently but more throrugh macros will be taken as the days progress. The only problem i've had is some of the sugar leaves on 2 of the plants have really taken a beating and show some strange signs. I think the LED's aren't to be under estimated and i've battled some burning and what seems to be calmag issues through the grow.
Likes
1
Share
. 馃尡 : 馃挧 : 4l day 73, 4l day 76 馃挕 : Dli: 45 mol/m虏/d 馃 :
Likes
24
Share
Total Days: 70 Flower: 31 Vege growth is stopped or very slow at this point. Might eke out another inch or two. I'll raise the lights as far as they can go soon (only 3-4" for the 650w light on right), but with the higher operating RH%, I've yet to see any pistil burn. The light cycle shift to accomodate the painters definitely stressed 2 plants. One was removed. The second i am retardedly going to keep. I stripped off lower weak buds that had the nanners. Pruned a few weak axilla, too. The nearby plant pistils are lily white, so it should be fine. The pistils will be changing color soon, so that will no longer be a good way to assess the risk going forward. Meh, I know it was caused by light stress, so any seeds not selfed I'll probably keep them. Overall, I'm relatively happy with development. Need to adjust some procedures in next cycle and maybe a few more tweaks in winter 2025-1. Second irrigation went well, but i did find a partially clogged emitter. Probably a plastic bit from hold-punching. With 8 emitters per pot, the overkill makes it irrelvant and the pot wasn't the slowest to finish. A few emitters has some roughly milled inlets. I'll inspect them all over the next couple weeks and replace some as needed. Just realized my new dehum was glowing in my tent the entire time. Luckily the display was facing away but now has a cardboard flap blocking it. If it was fine before, it's even safer now. Photons had to bounce of a wall and travel 5' before it could hit any plant. ----- Early update before end of week upday: So, I've been procrastinating replacing the irrigation setup. It's slowly gotten worse each year (3rd ongoing), but never had the dripper devolve into a dribble. I've been hand-watering 1 or 2 pots the last week or so. Replacing the mini sprinkler heads only fixed 1 of the problem-pots. Think the fittings are leaking on the one that did not improve. All the pvc is gone. All the 1/4" manifolds and tubing are gone. The per plant adjustable nonsense is the worst idea ever as all it does is cause pressure changes and endless tweaking of all the little sprinklers, because changing one impacts all the others, or a speck of dirt might cause a new imbalance that requires adjustments etc - Fucking nightmare of useless repetitive behaviour. Still have the 3/4" ID lead-in, heavy duty, 450psi graden hose with ball shut-off valve and pressure regulator. That is now connected to a 3/4" wye with two 1/2" irrigation tube adapters attached to each end. This forms a loop around the pots with a 1/2" tee per pot that leads to a gate shut-off valve and eight 2-gph pressure compensating emitters - 96 in total. Will do first test run on Sunday. The great thing is that this is all plug and play when I switch to injectors. That'll require some sort of pvc manifold and check valve at the utility tub, but otherwise just connect hose, and it's golden. That's the next step. I'll also re-incorporate the wifi-enabled solenoid valve at that point. Getting rid of the 55-gallon reservoir and pump would be nice. One less thing to maintain (rez) and less things that can break down (pump / powerhead). ------ Sunday Test Flawless first run. Time will tell if they are resistant to clogging, but optimistic at this point. 18psi operational pressure at the irrigation loop. Didn't even need the regulator. The mesh strainer at the pump intake doesn't have the typical, small air-bubble, so the last setup was letting a little air in. The last setup was fatally flawed. Pressure compensating emitters for the win. They didn't even squirt wildly as the air was expelled from empty tubing on first run. Took ~4mins or so. Some pots finished a bit sooner, but that's because they don't drink as much per 24 hours. I can live with that kind of waste. I'll get the timing down to reduce water usage even further. I don't need to wait for every pot to exhibit runoff as that is beyond 10% runoff needs. Might be able to get 4 fertigations before refilling reservoir instead of 3. We'll see. I don't like the minimum ~12-15 gallons sitting over night. It fouls the reservoir faster at low volumes. Anyway, super geeked. They better not clog easily, lol....
Likes
2
Share
@BombBuds
Follow
10 Tage getrocknet bei 19-22 grad und 50-55% rlf