Final week of feeding nutes before flushing. The buds on this girl have really started to swell during the last week and I hope it continues through this last week of feeding. Thanks for looking! 👽🌳

Haven't been keeping up weeks fly by so quickly never the less girls are doing well took some cutting the day before....5 gelato, 15 mcm og, 20

No issues this week. Not much progress either. Lol

Slight nutrient burn on the super silver haze and the banana. I have backed them up in feed from 10ml per gallon back to 8, it seems to have done the trick the last couple days. Both banana and super silver haze are trucking along quite well I think otherwise. I have officially decided to start my flushing on the black domina x Scott's og, trichomes are about half milky half clear, not sure if I should be doing a full flush or continue feeding through week 7 and start flush on week 8 I'm not overly sure lol see how it goes anyway. Cheers

*Increased ppm from 850 to 950 *Week 3 of flowering. *Did some defoliation will leave it as if and see how it turns out. *Smell is weak. Just a piney smell to it. *left one with out lolipopping.

In week 5 of flower and decided to start documenting my indoor 2x4 grow setup. We currently just finished day 3 of week 5. I have my lights running from 9:15PM - 8:45AM. I am not sure how I messed up on my timer but that's been my schedule since flipping to flower. I have an A/C in my bedroom that I duct into the tent. I have my A/C set at 62F and the tent gets to around 71-75F with the lights on. Lights off it ranges from 68-70F. I have a small dehumidifier in the tent that needs to be replaced because it is not efficient. I have an intake fan running at full blast at all times and my exhaust fan is automated to turn on based on temp and humidity. Week 5 has brought on a lot of strong dank smells and a whole lot of weight to the buds. They are really starting to thicken up! I have not had too many issues with this grow so far and luckily, the tent in clean and bug-free. Lots of resin and terpene production going on and you can smell and see it increase daily! I am following General Hydroponics Flora Series 6-Part grow chart. I am currently following the medium strength chart. I'll measure everything out exactly as the chart suggest then dilute my mix until I get to my desired PPM of 1000-1200. I PH around 6.2-5.8 and then add my microbes. I changed up my watering technique mid grow due to an issue I dealt with and now watering 2x a day. Lights on and right before lights off. If my lights didn't run overnight, I would like to add in a 3rd watering in the middle of my light cycle but 2 a day is working for now. I water until there is a good amount of runoff. I measure the PPM of my runoff compared to the PPM of my inflow mix and will keep watering until the runoff is 300PPM or less over my input. So if my mix is 1000 PPM and my runoff is 1600PPM, I will go back and water or as I like to think about it, rinse off the coco until my runoff PPM is at 1300-1000. It is a little tedious but it's a habit I formed and it does not take much longer to ensure your PPMs in the root zone is perfectly where I want it. I defoliated right before flipping to flower. Then defoliated 2 weeks later, and then a minor defoliation on week 4 of big fan leaves. I most likely won't be taking off any more leaves for the rest of the grow unless they are really blocking the light. I am planning on harvesting in week 8 or 9, depending on when the plant is showing it is ready. For General Hydroponics line, it has been the same nutrient strength/mix from week 3-5. Next week, Week 6, we start lowering the strength and adjust the amounts as we get into the later stages of flower and eventually will be flushing. For my flush, I will be using GH Florakleen, GH ripen, Mammoth P, and Bio-Fizz. Excited to see how these girls turn out! I'll be adding my outdoor grow as well as a new veg tent that I setup yesterday in my room. Stay tuned!

6 seeds auto speed bud from seedman. Using peat pellet to germinate and directly buried into 2 gallon fox farms o ocean forest soil. Using RO water. So will need to add cal mag. After a few nodes grow. This is my second grow. First grow a GSC clone. is currently drying in the same tent. Using a iffy method. But the plant had a lot of deficiency’s and was not worth taking care of 100%. Lights were switched back to 18/6 after harvesting the photo.

🌱 Germination Journey with Terpyz Mutant Mentha de Croco 🌱 Hey Grow Fam! Today kicks off an exciting adventure with Terpyz Mutant Mentha de Croco genetics. I’ve got 10 regular seeds ready to sprout, and I’m looking forward to discovering some beautiful female phenotypes—and maybe even a standout male for potential future breeding. It’s been a while since I’ve worked with regular seeds, so I’m thrilled to dive in! Germination Process Overview: Here’s a step-by-step rundown of the germination setup and process, with a special focus on the equipment and nutrients that are helping these seeds thrive right from the start. Step 1: TheCannaKan Germination Pod 🌱 For germination, I rely on TheCannaKan—a device I’ve come to love and trust. It’s designed to create the perfect microclimate for seed germination, and within just 24 hours, the seeds started showing signs of life. By the 32-hour mark, they were all ready to be transferred to the next stage! I can’t recommend this gadget enough for anyone serious about getting strong, early growth from their seeds. • Why TheCannaKan? • Humidity Control: Ensures seeds stay hydrated without oversaturation. • Stable Temperature: Maintains an even temperature around the seeds, so there’s no shock or stalling. • Enhanced Oxygenation: Keeps fresh air circulating, helping prevent mold and ensuring seeds don’t suffocate. Step 2: Transfer to Root Riots & Aptus Holland Supplements 💧 Once the seeds were sprouted, I transferred them into Root Riots, known for their excellent water retention and structure that encourages strong root growth. Root Riots also have a pH-balanced, spongy texture that makes it easy for roots to penetrate, promoting sturdy, healthy root systems. At this stage, I started using Aptus Holland’s Regulator and Startbooster at 1ml/L each. Here’s why I chose these products for early growth: • Aptus Regulator (1ml/L): Helps strengthen the plants against environmental stresses by supporting cell wall structure. It’s a fantastic choice for giving young seedlings an early boost in resilience. • Aptus Startbooster (1ml/L): This product provides essential microbes and nutrients that stimulate root growth and early plant vigor. Especially for regular seeds, the early root development makes a noticeable difference in later growth stages. Step 3: Lighting with Future of Grow (FOG) LED at 200 PPFD 💡 For lighting, I’m using a Future of Grow (FOG) 600W LED. For the germination stage, I’ve dimmed it to around 200 PPFD (photosynthetic photon flux density), which provides just enough light for healthy, strong seedling growth without overwhelming them. • Why Low Intensity? • 200 PPFD ensures that young plants aren’t exposed to too much light, which could cause stress or stunting. This level of intensity is perfect for encouraging healthy development without risking “stretching.” • The FOG LED provides a balanced spectrum tailored to plant growth, setting up these young sprouts for success as they grow. Step 4: Environmental Control with TrolMaster Tent X Controller 📲 For monitoring and control, I’m using the TrolMaster Tent X Controller, which lets me dial in every aspect of the environment to make sure these little ones have the perfect conditions for germination and early growth. • TrolMaster Benefits: • Precision Control: Adjust temperature, humidity, and lighting all in one place. • Notifications: Sends updates in real-time to my device, so I can make adjustments as needed without being physically present. • Consistency: Maintains stable conditions around the clock, reducing stress on seedlings and ensuring they’re thriving. Grow Tips & Reflections: Germination is one of the most crucial stages in a plant’s lifecycle. Starting with strong genetics like Terpyz Mutant Mentha de Croco, combined with a solid germination setup and the right nutrients, creates the foundation for a successful grow. 💡 Quick Tips for Fellow Growers: • Hydration Balance: Don’t oversaturate! Moisture levels should be high enough for the seeds to sprout but not so wet that they drown. • Light Management: A low PPFD for young seedlings prevents stretch and keeps nodes tight, preparing them for a healthy vegetative phase. • Environment Consistency: Use a reliable controller like the TrolMaster Tent X to manage your settings, and consider monitoring tools for real-time adjustments. Shout Outs to the Community: Big thanks to Terpyz Genetics for these incredible seeds, Aptus Holland for their top-notch nutrients, Future of Grow for the stellar LED lights, and TrolMaster for the amazing controller. Also, shout out to all of you in the growing community—you make this journey exciting and filled with endless learning. Let’s keep growing and sharing together! That’s it for the germination update! Next up, I’ll be monitoring growth closely to identify strong females (and maybe a standout male for breeding). Stay tuned for updates on our Mutant Mentha de Croco adventure—this is just the beginning! Genetics - Mentha De Croco https://terpyz.eu/products/menta-de-croco-fern-type?_pos=1&_sid=e9237cbcb&_ss=r DogDoctorOfficial Discount Codes @ terpyz.eu - DOCTOR 15% off Nutrition - @aptusholland https://aptus-holland.com/ Led Power @ F.O.G. Future Of Grow https://www.thefuturofgrow.com/en/online-store/BLACK-SERIES-600-p489093171 Controls @ TrolMaster https://www.trolmaster.eu/tent-x As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciloved and i fell honored with you all in my life With true love comes happiness Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so Growers Love To you All 💚

She’s in full swing now :)

mid week 6 flower | really healthy plant | absolute pleasure | very small node distances | the cut looks exactly as advertised | now i will be gone for 2 weeks | i will close the water loop an install a drip ring | week 6,5 to 8,5 will be water only | lets see what will happen

My second growroom is built and the girls have moved in. This new strain combines two well-received parents, Juanita la Lagrimosa (Spanish for "Juanita the Tearful") and Royal Highness, which are themselves genetic hybrids of other precursor strains: Juanita the Tearful from Queen Mother and a Mexican-Afghan blend; Royal Highness from Dance Hall and Respect 13. On and on the strains date back in agricultural time, each new variety with its own unique smell, taste, color, high and medical benefit. However, in the past decade, a goal of all this tinkering has been what some producers are starting to call “Royal Respect” with the soul of marijuana's benefits going toward both body and mind. Painkiller XL is notable for its near-equal representation of 6 percent tetrahydrocannabinol (THC) and 7 percent cannabidiol (CBD), achieved by a seed that's 70 percent sativa and 30 percent indica. While the sativa variety of cannabis is widely known for producing more of a mental, cerebral high, and indica has a reputation for contributing more toward its physical high, other factors are more important to consider: THC is the compound given most of the credit for that head high, with CBD takes the credit for marijuana's many proven medicinal benefits, which range vastly from relieving pain, anxiety, migraines, fibromyalgia and even mad cow disease to easing many of the most deleterious symptoms of AIDS, diabetes, epilepsy and Parkinson's disease. These are just a handful of the dozens of ailments marijuana is being prescribed to combat by doctors across the globe and in more than a dozen U.S. states. Cooperatives at medical marijuana dispensaries have been at the forefront of providing CBD-rich cannabis buds and oils for their patients, who undoubtedly appreciate being able to purchase the strain best-suited to ease their particular ailments. This new strain joins others rich in both CBD and THC like Euphoria, Royal Medic, Medical Mass and Danceworld that seek to actually not necessarily downplay cannabis' psychoactive effects in favor of optimizing its healing role, but instead equalize the two. According to the California-based Steep Hill Cannabis Analysis Laboratory, this equalization brings to the cannabis user not just the physically healing aspects, but also the spiritually and psychologically healing benefits as well. There are other strains with very little THC and more CBD than Painkiller XL , but rare are such splendid balances. Producers of this strain say it produces a considerable amount of pain relief, with a mild, relieving mental euphoria. With a flowering time of eight weeks, the Painkiller XL seed can produce 525 to 575 grams per plant indoors. Inside, the dried yield is 400 to 450 grams per plant. Inside, the plants average in height at about 31.5 inche (80 cm); outside, the average height is about 53 inches (135 cm), with harvest time at the end of September. THC: 9% CBD: 9% Yield Indoor: 500-550gr m2 Yield Outdoor: 500-550 grams per plant dried Height Indoor: 60 - 100 cm Height Outdoor: 120 - 150 cm Flowering time: 8 weeks Harvest month: Late September Genetic background: Juanita la Lagrimosa x Royal Highness Type Sativa: 75%; Indica: 25% Effect: Physical, clear high. ---------------------------------------------------------------------------------------------------------------------------- 2017-10-20. Week 6 day 3. Late update. The girls are in there final 12 liters autopots and have moved into my newfixed second growroom. The girls is growing fine and have been Fimmed. Girl 1 is 26 cm and Nr2 is 16 cm tall. Added videos and pics. Grow room Nr2 is 1.75 meters x 1,05 meters and its 1.92 meters high. Im using 1x 140 watt Apollo led 4 and 1x 370 watt Apollo led 10.

Zdarec Jedna kytka byla hermáč ,tak jsem ji skosil a ze dvou holek zbyla pouze jedna😭 . Díky Hombre za radu, mě to vůbec nedošlo, že ta pálka je už oprcaná.🤦 Ještě před tím než jsem tu kytku zlikvidoval, tak jsem ji na ukázku natočil - viz video. Škoda jí, byla pěkná a mohla mít pořádné štangle. Zbylá kytka už má za sebou čtvrtý týden květu, tak už dostává také PK v podobě Hammerhead od Advanced Nutrients. Snad už nebudou žádné problémy a dojedu tenhle grow v klidu do zdárného konce. No nic to je zatím vše, tak zase za týden zdar a ať to roste 🌿😎

Super easy to grow

Switched to flower nutes too early. Back to full strength terp tea grow 711. Atleast for the next 2 weeks, maybe less. 5/1/24 Plant is stretching now. FYI just to clarify, I switched lights to 12/12 on 4/20 but I am considering her being in veg still until I see more pistils. Probably the end of this week. After a 2 week transition period 5/3 2 days later and I need to get my damn camera in the tent! This stretch is starting to look like nursery explained. She’s supposed to triple in size. I thought I tied her down too much and she would stay short. I swear she’s grown an inch over night. Starting to dominate the tent. Literally 2 days ago, I said that I didn’t consider this week to be flower and still the transition phase. Now she looks like she’s fully in the flowering phase. She’s beautiful and I’ve been impressed since veg. Since I chose her as a clone I liked the way she was. Hoping she follows through🌱💚

As I said, she has become a single fat dense and sticky main cola, very compacted, looks like it's just 1 huge fat nugget. Very nice aroma but not stinky at all. I'm enjoying her, she's not very big but she's literally a single big fat nugget.

There as big as they can be for my space so I'm switching to 12/12 Ive also switched the IR on as it's supposed to speed up the flowering transition. It's a new light to me at the moment from geeklight it's 3000k 320w v4 lm301H with added 660nm switchable IR and UV. I've got it 40cm from the plants and have been using a lux meter app on my phone. (don't have par meter) I read online that 50000 max in veg and 65000 to70000 max in veg is about right but I'm just turning it up as I go. The plants are very compact compared to HPS. My light spread over 120x60cm is really good in comparison to a 440w HPS. If anyone has experience with quantum boards I'm open to advice?

I think im at the end of the stretch now. Lets see these ladies do their thing! 25 percent increase on bloom nutes and increased the cal mag and floralicious this week. Removed floragrow. I hope to see some serious flower development this week.