Lost In Translation (LIT) - Organic 4x4
3/13/2024 - Day 15 Flower: Ran into some issues after the last watering. The newest leaves have some severe curling going on, and I've had a few leaves with some minor brown spotting. I'm not 100% sure what caused it, but narrowed it down to either TeaCo Super Tea, Recharge, or the foliar spray I did with Dr. Zymes Eliminator. I did the foliar at lights out, but maybe there was still some residue when the light came back on. Either way, I'm taking it easy on this watering. Gave them 4 gallons of 6.5 ph water mixed with Jay Plantspeaker Quillaja, Coconut Powder, and a half dose of Rootwise Bio-Catalyst and Yah-Whey. The curling does not seem ro be getting worse, so hopefully they will grow out of this. Also, they have started to slow on rhe stretching, which is good, because they are getting close to the light. 3/14/2023 - Day 16 Flower: So I've been looking at some of the more deformed leaves and I'm pretty sure the leaf curl and brown is from the Dr. Zymes. The leaves with issues appear to have a slight glossy residue to them. I'm guessing when the Dr. Zymes dried on the leaves, it had a reaction when the light came back on. Now that I'm into week 3 of flower, I plan to cut out any foliar sprays, so hopefully I'm right an the issue won't get worse. I had some seeds that I sprouted and forgot to use yesterday, so I made a 2 gallon Sprouted Seed Tea (SST) and added some Jay Plantspeaker Quillaja, Rootwise Bio-Phos, and a half dose of Fermented Comfrey Extract and Fermented Peach Extract. 3/16/2023 - Day 18 Flower: plants are looking good. Flowers are starting to develop and I'm already seeing the beginning of some tricomes. Stretch appears to be just about done, so hopefully it will be smooth sailing from here. The curling from last week has not gotten any worse. 3/17/2023 - Day 19 Flower: watered about 6 gallons of worm tea I brewed for about 24 hours. Added some Jay Plantspeaker Quillaja, BuildASoil BuildABloom, and Rootwise Bio-Catalyst. Also, did some minor defoliation of some of the larger fan leaves blocking lower bud sights. Still need to do more, but I plan to spread it out over a few days. 3/18/2023 - Day 20 Flower: Cleaned them all up real good. Took off all the large fan leaves, except for the top two, and cut off basically anything on the lower half of the plant. May have gone a little higher than I would have liked, now that I'm seeing it done, but too late now. Normally, i only like to take off about 1/3, but i guess we will see what happens when the bottom half is stripped. Always learning around here, haha. Hopefully I should have very little popcorn buds.
Pickle Lemon Haze F1 Zamnesia Pheno A
💙 Project Blue Tent – Week 9 Pickle Lemon Haze F1 – Pheno A 🌿 When The Plants Make You Rearrange The Room Hello everyone, and welcome back to another chapter of Project Blue Tent! 💙🌱 And... what a week this has been. If you've been following this project from the beginning, you already know that these four Blue Waffle F1 and Pickle Lemon Haze F1 plants have been growing with an incredible amount of energy. This week, however, they finally made one thing very clear: We were running out of room. 😂 The plants had stretched much more than I wanted. The LEDs were getting too close. The combination of the drainage system, pots, substrate and overall height of the plants was eating into our available vertical space. So... we adapted. And Pickle Lemon Haze Pheno A was right there in the middle of it all. Growing. Stretching. Flowering. And apparently completely unconcerned about the fact that she was becoming too tall for her own room. 😂💙 So this week wasn't about sitting back and watching. This week was about reorganizing the environment around these girls and giving them the space they need to continue the journey. 🌸 Week Nine – The Stretch Was Real Pickle Lemon Haze Pheno A is now approximately 145 cm tall. And that's the plant itself. Add the pot. Add the substrate. Add the drainage system underneath everything. Then look at where the LEDs were sitting... Suddenly those 145 centimetres become a very serious number inside a tent. 😂 I knew we could see significant stretching after seven weeks of vegetation. We discussed it last week. The plants had already gained a considerable amount of height almost immediately after the flip. But honestly? They still managed to surprise me. They didn't just stretch a little. They stretched enough that we had to rethink the physical arrangement of the room. And I think that's one of the most important lessons from this week. Sometimes you don't solve a plant problem by changing the plant. You solve it by changing the room. 💡 Making Room For The Canopy The first major change was moving the carbon filter and extractor outside the tent and onto the top. Previously, that equipment was taking up valuable vertical space inside the grow area. By relocating it, we gained those precious centimetres back. The airflow system now pulls air from inside the tent, through the carbon filter and extractor positioned above, and then exhausts it outside. And that gave us something we desperately needed: room above the plants. Once the equipment was out of the way, we were able to raise the LEDs toward the top of the tent. That immediately gave the canopy more breathing room. And considering some of the tops had already started showing signs of getting too close to the lights... this was very welcome. 🔥 A Few Tops Got Too Close Before we made the changes, we did have a few leaves and tops showing some LED stress. Nothing catastrophic. Nothing that has changed the overall health of the plants. But there were some burned areas where the canopy had simply gotten too close to the light. The important thing is that we caught it. We raised the LEDs. We opened the canopy. We created more space. And now we're watching how the affected areas recover. That's part of running a real grow. You can calculate distances. You can watch environmental numbers. You can plan your canopy. But eventually the plant gives you the final report. And in this case, the report was: "Doctor... the sun is a little too close." 😂☀️ Message received. ✂️ The Big Defoliation Once we had created the additional vertical space, the next job was opening the plants. And we went deep. There was a significant amount of foliage removed from the room. The plants had become incredibly dense, and at this stage that density needed to be managed. The purpose wasn't to remove leaves simply because we had scissors in our hands. The purpose was to reduce unnecessary congestion and expose the flowering structure we've spent so much time building. More visibility. More airflow. More room around the flowering sites. A cleaner canopy. And a better-organized flowering room. Pickle Lemon Haze Pheno A came through the process beautifully. And when you look at her now... you can actually see the architecture again. The branches. The flowering sites. The SCROG. The spacing. Everything is much easier to read. 🌿 What Defoliation Is — And What It Isn't I think this is worth explaining because we're showing quite a significant defoliation in the photographs. Defoliation isn't about removing healthy leaves because healthy leaves are somehow undesirable. They're not. The leaves are doing important work. What we're managing here is excessive foliage and congestion inside a very dense flowering room. The plants had built an enormous amount of vegetative material. Now we're transitioning toward a flowering structure. So we're selectively reducing what we don't need in order to make the remaining architecture more functional. And I'm not expecting the defoliation to magically create flowers. That's not the point. The point is simply to give the flowers and remaining canopy a better environment in which to develop. Now we've done the work. And now... we leave the plants to respond. 🕸️ The Second SCROG Is In The other major addition this week is the second SCROG net. The first SCROG helped us build and distribute the canopy during vegetation. It did its job beautifully. But these girls have become much taller than originally anticipated. And now we're thinking about the future weight of those flowering branches. So the second net is primarily about support. We're not trying to turn these plants back into a vegetative canopy. We're preparing the structure to carry what is coming. Because looking at these plants now... I have a feeling some of those branches are going to appreciate having something underneath them later. 😂 It's always better to have support ready before you need it. 🌬️ Two Fans – Creating The Vortex We also added another Zamnesia clip fan, this time underneath the canopy. We now have one fan working higher in the room and another operating lower down. The goal is to create more complete circulation through the growing space. The lower fan pushes air through the lower portion of the plants while the upper airflow continues moving air through the canopy. Together, this creates a kind of vortex-style circulation rather than having air movement concentrated in only one area. That's particularly valuable now. We've opened the canopy. We've created more space. Now we want air moving through that space. Not just across the top. Not just underneath. Through the room. And looking at the tent now... I really like what we've created. The room feels much more organized. ✂️ Clean Tools – Always Another little detail I want to mention is the Zamnesia curved scissors. I really like these. For most of the larger defoliation work, I actually use my fingers. If a leaf can be gently removed without cutting anything else, that's often my preferred method. But there are always those little leaves, delicate areas and awkward positions where scissors are simply the better tool. And whenever we're using scissors around the plants: Clean. Always. Even if they're brand new, I still like to clean them. It's such a small part of the process, but it's one of those habits that makes sense. Clean hands. Clean tools. Gentle work. And only remove what needs removing. 🌸 And Then There's That Broken Branch... Now we need to talk about last week's little accident. 😂 Unfortunately... the branch we broke while training last week did not survive. We tried. We supported it. We gave it time. But sometimes... a branch is simply done. And that's okay. It happens. I'm certainly not going to pretend otherwise. The important thing is what happened to the rest of the plant. And the answer is: Absolutely nothing. She carried on. The plant didn't suddenly collapse. She didn't stop developing. She didn't lose her momentum. She didn't let one branch decide the story of the entire plant. She simply continued flowering. And honestly? That's one of the most reassuring things about growing. Sometimes you make a mistake. Sometimes the plant doesn't recover from that particular injury. But that doesn't mean the whole plant is affected. One branch didn't define Plant A. The rest of her is doing beautifully. 💙 Pickle Lemon Haze A – Still Standing Strong That's actually something I really like about this girl. She's resilient. She has been through topping. Training. SCROG. Defoliation. The flowering transition. A broken branch. And now another deep defoliation. And she's still there looking healthy and vigorous. If anything, the whole plant seems to have taken the attitude of: "Fine. That branch is gone. I'll grow the rest." 😂🌱 And that's exactly what she's doing. The canopy remains strong. The flowering sites continue developing. The remaining branches are healthy. And the loss of that one branch hasn't changed the overall performance we're seeing. So... lesson learned. We move on. 🌿 The Blue Tent Had To Grow Up There's something funny about this week. Last week, I was talking about managing the stretch. This week, the plants basically said: "You'd better manage it." 😂 So we did. The room has changed considerably. The carbon filter and extractor are now outside the tent. The LEDs have been raised. The canopy has been opened deeply. The second SCROG has been installed. The second fan is circulating air below the canopy. And suddenly... we have room again. The plants are still tall. They aren't magically becoming shorter. But they now have somewhere to continue growing and flowering without immediately running into the ceiling. That's a much better situation. 🌸 From Vegetative Structure To Flowering Structure And this is the really exciting part. All that vegetative growth wasn't wasted. The seven weeks of vegetation gave us: Strong branches. A large root system. A filled SCROG. A broad canopy. A lot of flowering sites. Now we're transitioning from building the plant to watching that structure turn into flowers. That's the part I really want to watch now. We've done the major structural work. We've made the room fit the plants. We've made the canopy more manageable. Now... let them flower. 💧 Nutrition – They're Hungry Girls The plants are also telling us something very clearly through their appetite. They're hungry. So the flowering recipe has moved slightly upward. We're now running: Plagron Hydro A — 2.2 ml/L Plagron Hydro B — 2.2 ml/L Plagron Hydro Roots — 1 ml/L Plagron Power Buds — 1 ml/L pH adjustment as required This has brought the EC up to approximately 2.49 mS/cm. It's still a measured change. We're not suddenly throwing everything at the plants. We're responding to what they're showing us. They're growing rapidly. They're flowering. They're drinking. And the foliage continues looking healthy. So we move forward carefully and watch the response. 🌡️ Blue Tent – Current Conditions The room remains stable despite all the physical changes we've made. Current recorded conditions are approximately: 🌸 Flowering: Week 9 📏 Height: approximately 145 cm 💡 Light schedule: 12/12 ☀️ Day temperature: 27°C 🌙 Night temperature: 27°C 💧 Relative humidity: 67% ⚗️ pH: 6.01 ⚡ EC: approximately 2.49 mS/cm 🌡️ Solution temperature: 25.3°C 🌱 Substrate temperature: 24°C 💨 CO₂: approximately 666 ppm ? Pot size: 8 L 💦 Watering: approximately 1.6 L per plant / 24h And I think the consistency is important. We've changed the physical arrangement of the room quite significantly. But we're keeping the growing environment as stable as possible. The plants already have enough to adapt to. They don't need us changing everything at once. 🌬️ Airflow Is Now A Major Part Of The Equation With the plants this large and the flowering structure developing, airflow becomes increasingly important. The deep defoliation has opened the plants. The second fan gives us additional movement below the canopy. The upper fan continues moving air higher in the room. And moving the extraction equipment outside the tent gave us more usable space. Everything is now working together. That's what I want. Not one single "magic" piece of equipment. A room where the different systems complement each other. Light. Air. Irrigation. Nutrition. Structure. And observation. 🕸️ Supporting The Future Flowers The second SCROG is probably going to become more important with every passing week. Right now, it might look like another piece of equipment in the tent. Later... it could be the thing keeping those branches where we want them. The plants have already developed a substantial framework. Now the flowers are going to start adding weight. So I'm very happy we installed the second net now rather than waiting until the branches were already carrying heavy flowers. We're preparing the room for the next stage. And that's really what this week has been about. Preparation. 🔬 Same Room – Different Strain – Same Incredible Response There's something fascinating about Pickle Lemon Haze Pheno A growing alongside the Blue Waffle F1 girls. They're different genetics. Different strains. Different individual diaries. And yet this week... they look remarkably similar. Same incredible stretch. Same environmental conditions. Same physical limitations. Same need to reorganize the room. Same deep defoliation. Same second SCROG. Same additional airflow. Same nutrition increase. And this is actually another beautiful part of the experiment. We're watching genetics express themselves under a shared environment. Sometimes the differences are obvious. Sometimes... the plants simply agree with each other. 😂💙 This week was one of those moments. 🌿 The Canopy After Everything Looking at the room now, I have to say... I love it. The plants are tall. Yes. They are probably taller than I originally wanted. 😂 But they're healthy. They're vigorous. They're flowering. And after the cleanup, the architecture is much easier to see. There is something very satisfying about looking at the room after a major intervention and realizing: Okay. This works. We made the space. We created the support. We improved the circulation. We raised the lights. And now the plants have somewhere to finish. That's a good feeling. 🔭 Looking Ahead – Now We Let Them Work This is where the next phase becomes much simpler. We've done enough. Now I want to watch. I want to see the stretch finally slow down. I want to watch the flowering sites develop. I want to see how the plants respond to the deep defoliation. I want to see how the remaining branches use the space. I want to see how the second SCROG supports them. And of course... I want to see what Pickle Lemon Haze Pheno A ultimately becomes. The broken branch is gone. That's part of the story now. But the plant is absolutely fine. And that's the important part. She's still here. Still flowering. Still growing. Still shining. 💙 Final Thoughts – One Branch Less, Not One Bit Less Determined What a week. 😂💙 Pickle Lemon Haze Pheno A has officially joined the "we need to rearrange the entire room because the plants got too tall" club. At approximately 145 cm, she's certainly not small. And once you add the pot, substrate and drainage system underneath her, we were getting dangerously close to our vertical limits. So we adapted. The carbon filter and extractor moved outside the tent. The LEDs went higher. The canopy received a deep cleanup. A second SCROG was installed. A second fan was added underneath the canopy. The airflow was improved. The room was reorganized. And those few LED-stressed areas were addressed before they could become something more serious. And then... there's that branch. Unfortunately, the broken branch from last week didn't make it. It happens. I'm disappointed, of course. But I'm not worried. Because look at her. She's still growing. Still flowering. Still healthy. Still vigorous. And the rest of the plant hasn't missed a beat. Sometimes growing teaches you humility. You can train carefully. You can plan. You can prepare. And occasionally... snap. 😂 You learn. You move forward. And you keep growing. That's exactly what Plant A has done. And honestly, that's what I love about documenting a real grow. Not everything is perfect. Not every branch survives. Not every plant stays the height you planned. Not every week goes exactly according to the original design. But that's the reality of cultivation. You observe. You adapt. You make the room work for the plants. And then you let them do what they know how to do. Grow. Flower. Finish. Pickle Lemon Haze Pheno A is still doing all three beautifully. And now that we've finally given these girls a little more breathing room... I'm very curious to see what happens next. The room is ready. The lights are higher. The airflow is moving. The second SCROG is in place. The nutrition is supporting them. And the flowering journey is really getting started now. So let's forget about that one lost branch. It had its chapter. The rest of the plant has plenty more story left to tell. 💙🌸🌿 🙏 A Huge Thank You A huge thank you once again to Zamnesia for making Project Blue Tent possible and for giving us the opportunity to explore these beautiful Pickle Lemon Haze F1 genetics individually. Thank you to Plagron for the Hydro nutrient line supporting these incredibly hungry and vigorous plants as they move deeper into flowering. A massive thank you to Zamnesia for the Phytonaut LED lighting, the curved scissors and the clip fans that continue playing such important roles inside this project. Thank you to Mars Hydro for the automatic drip irrigation and drainage system that continues keeping these plants consistently supplied despite how quickly they're growing. And thank you to GrowDiaries for giving growers a place to document these journeys, share the successes, share the mistakes, and hopefully learn something from both. And finally... thank you to everyone following Project Blue Tent. This week was definitely one for the books. The plants stretched. We ran out of vertical space. We moved equipment. We raised the lights. We opened the canopy. We installed another SCROG. We added another fan. We lost one branch. And somehow... we ended the week looking at a room that I think looks absolutely beautiful. 😂💙 That's growing. You don't always get the week you planned. Sometimes you get the week the plants give you. And this week, these girls gave us plenty. Pickle Lemon Haze Pheno A is still standing. Still healthy. Still flowering. Still vigorous. And now... she has a little more room to finish the journey. Let's see what this beautiful girl does with it. Until next week... One branch may be gone, but Plant A is still here, still shining, and still ready to finish strong. 💙🌸🌿 Growers Love, happy growing, and take care everyone! 🌱💙
Zkittlez
Fatnastyz
@Fatnastyz
Volgen
10-18 She hasnt even acted like I bent her top! Recovered nicely. Her buds have turned upwards to welcome the light! 😁 10-19 Water, noticed some slight burn, will flush her next day or so. She looks pretty good other. Spaced some branches just just a tad. Cleanin up, while she fattens! Has a minty smell. I know Im rough, very grateful for these beans Weedseedsexpress!💚😻 Ill get my shit together! 💪🤘 .
🍀42fastbuds🍀
🍀42fastbuds🍀 Guava auto x3: 57/63 days flow Papaya sherbet x3: 70 days flow Gorilla melon x2: 70 days flow
Sour Strawberry 🍓🍓🍓
WeedWagon
@WeedWagon
Volgen
Day 57-63 - First week of flower - healthy growth - Day 61 first sign of flowers - 3l every 2-3 days
shorts_status_processing
Barney's AMNESIA valley
GRow_M8s
@GRow_M8s
Volgen
* Starting this week with a final 🍃 defoliation, the plants responded really great after every training (LST, defoliation, lollipoping), eating and drinking like real champs 🏋️‍♀️ 🧗‍♂️. * Humidifier 🌪️ makes a real difference, through low humidity (40%-50%) we achieved better VPD -> more transpiration -> faster growth, the plants enjoying it. * Gemma's crystalize NPK for bloom, collaborates with the others boosters with no problem (reccomend separate mixtures when feeding). ℹ️ You can see the response on the plants after one day --> updated photos ℹ️ Later this week : The plants eating like beasts, watering almost every day, Buds progressing smoothly, Smells too and the canopy is pretty good in this (0.80m ×0.80m ×1.60m tent size) we are impressed with transpiration rate, game changer the humidifier present.
CZ LEGAL GROW
Patras19
@Patras19
Volgen
Čusan tak proběhl sekec mazec. Mam rad spíše energii model tak jsem to sklidil bych řekl tak akorad. Na nějaký kouř tam bude za me spokojenost. Je cítit taková sladká zem, hodně intenzivní. Těším se mega na ochtnávku
First Attempt (with 528 Hz informed water)
Waveform
@Waveform
Volgen
Once again, this week starts where the former one ended. With the exception of all the cables you can see in the first picture. I dared to install a minimalized version of the Raspi control only controlling the self-built humidifier and one blower/fan combination. I was very pleased to see how easily the simple diffusor can hold optimum VPD as long as temperatures are high and humidity tends to fall below optimum VPD. A single 10 seconds evaporation can hold the level for about 2–3 minutes. I am not pleased to see the Monsanto blowers rather underperform. It’s impossible to reduce humidity or temperature with both running on full speed, while a lifting of the tent door will bring immediate changes. With the Raspi/Arduino success so far*, I am thinking about using old Power Mac fans which are WCM controllable and use 12 V. At least one to increase air intake, and maybe even the blowers. * It wasn’t any problem at all to have the Arduino collect CO2 and soil moisture data, so after some more cable manufacturing (aka helpless soldering), I could extend the Raspi control. I’m still uncertain about the camera module (@trelorny impressed me with his time lapse videos). I don’t want to put the hardware into the tent with its not so electronics friendly climate, already risking some rare outages of the temp/hum sensor. But the camera module cannot be placed far away. So maybe I’ll use the 3A model I own as a spare part as a camera driver. Any maybe, if it works, invest in a better camera module. Mine is generation 1. Oh, and the ladies! Gave them slightly fertilised water yesterday, and even it or the better VPD yesterday or a combination of both make me believe bud growth is a bit more visible today. The smell in the morning when I open the tent to release accumulated humidity is outstanding. They were already thirsty on day 57 again, so pure RO + a bit of tap water until it spilled out of their pot’s bottoms. Many fan leaves turning autumnally now, and the smallest Sherbet suffered a bit from over-fertilisation as I wrote. But it this stage I don’t go for leaf beauty anymore. Just another learning: Don’t use differently sized pots anymore. Hard to feed them individually this way. VPD was mostly in best range yesterday, and I have the feeling it really supports their bud growth. I added an "Evening time" option to my Raspi control that allows the humidity to sink a selected time before lights shut down. That made it possible to have humidity in best range for most of the night time too. They were even dry again on day 58 morning. Another time just water. The blowers cannot cope with the flowers’ smell anymore, and so sometimes my flat cannot hide who shares it with me. Day 60 presents me with a problem: I’ll leave on Friday for a few days. Considering the microscope pictures are not from the tops buds: Would you say it’s safe to give them another week? Problem solved on day 61. Only clean water from now on, and next week will be their last. You won’t see any new pictures for some days now. Me too … Something I wanted to share with you before I leave: I just finished to update my grow box control with a new PWM fan hat that keeps the Raspi cool, while at the same an infrared sensor can now measure real leaf and additional ambient temperature. Setup is much cleaner and more robust now, but I wish my flux would not make the solder stick to the tip of the machine instead of making it flow and stick at the tiny tiny spots I have to hit …
Francos Lemon Cheese Steckling
SS Sweet Cheese XL auto & Orange Apricot Glue XL Auto.  Mainlining try + new lights
Diips
@Diips
Volgen
been quite busy, due to my birthday and a new semester, which resulted in my Orange Apricot grew too close to the light and i mistakingly turned ny lights to 100% for a few days which ended up in light burn, so i had to re-adjust my setup and raised the lights.. also threw some netting on the orange apricot glue and some lst clips in an effort to hold them down abit.. still havent got the time to remove the burned leafs, but everything else looks perfect. ive also raised the Sweet cheese closer to the light.
Cannapot grow #3
SLH second attempt
xchdave
@xchdave
Volgen
Another week down, we're heading into week 8 of flower and it looks to be beginning it's fade with the top leaves going yellow. I don't think this is a deficiency this late in the game, The buds have matured alot this week with a lot of pistols turning from white to brown. Trichome production looks to be solid. Next week we will start checking the trichomes to see how far away from harvest we are
Auto mix
Tanjalope
@Tanjalope
Volgen
Been busy starting back at work, not had as much time as I would of liked to keep an eye on the garden especially now they are all flowering. I thought I may have harvested a plan or 2 by now but the girls are still doing their thing. The original Russian is going to be the first over the line though. Lovely smell coming off her is unreal. Hope everyones gardens are doing well. Peace 🍁
100 Free Seeds - Freedom Dream CBD
Auto purple Milf seed
Blue God x Cluster
Awesome week. Both plants are doing great. One is definitely praying to her Blue God lol.