31/07/23 Everything seems to be going really well even though I haven't added nutriments. I'm planning to use LST on plants 2, 3, and 4 this week, hoping not to mess anything up. I'll have to buy a dehumidifier too because it's very humid at my place right now, and I can't get the humidity level below 65% 01/08/23 I started the LST but only on 2 and 3, and I have no idea if I did it well, but I'm quite happy with the result. 02/08/2023 I have cut some leaves, especially on numbers 2 and 3, so that the little heads are no longer in the shade but directly in the light and I haven't touched number 1, I don't plan to touch it until the end.

I figured nothing could go wrong with 50% amber / 50% milky trichomes. Harvest day, Medical Mass: Huge buds and no traumas but got bud rot because of too high temps. The best I've ever smoked. Harvest day, Pineapplex Express: Got an early trauma when transplanting but handled it beautifully. Potent smoke. Pretty satisfied for a first grow, and I have a lot of changes for my 2nd grow!

Last watering before harvest, I'm planning on chopping her down Wednesday! Buds looks so full and smells wonderful! Very excited to harvest this strain

She's almost done. Starting to see cloudy so I'm just continuing to water. Started the water only last week so things should start to fade out alil more now. .. Definitely learned alot for next time I run this strain. Gonna be fun to redo. See how this week goes tho, not the biggest plant but for the minimum amount of inputs she's done well. But till the next update. Hope ur all doin well ,best of luck !!

MafuMome

ช่วงนี้เป็นช่วงที่น่าตื่นเต้น เนื่องจากต้นได้กลับมาฟื้นปกติ ผมได้ย้ายกระถาง กระถางใหญ่ 5 แกลอน แต่ผมใส่ดิน 5 กิโล เลยอยู่ประมาณ 3 แกลอน นะครับ ให้ปุ๋ยปกติ แล้วก็น้ำ 1 ลิตร ทุกๆครั้งที่หน้าดินแห้ง

Hello growers -May 30- Canapee development going as planned. Using wire to keep new growth even. Watering 0.3L every 72hours. No added nutrients plan seems to be doing ok so far.

8 semana en realidad, a una semana del corte

24 Oct 2021 Week 16 began yesterday, but the first watering of the week was today. I’m keeping up with the flush, starting the 2nd week today. Hopefully I’ll be able to harvest in a few days. My Trio is looking really lovely. Their buds are covered in trichomes that glisten under the lights. They are starting to darken in color in some areas like their mother did. They may take on some pinkish/purple hues before it’s all done. Some of their leaves are turning purple as well. The sugar leaves are somewhat dark, but still green. All three of them are very nice to look at, and their smell is super strong! It’s really nice in my grow room! Yesterday I went out and got some more of those support sticks from the local home store and provided support for all of the branches that needed it. Which was a lot! I got 7 new support sticks and used them all. All of the branches are now supported and flourishing! Today each of my girls received a gallon of properly pH’ed water, and each had a sufficient amount of runoff from which to gather measurements. The process went as follows: C1 & C2 had an initial pH of 6.9, and C3’s initial pH was 6.8. I added .2ml of pH DOWN to each gallon which adjusted the pH to 6.4 for C1, and 6.3 for C2 and C3. TDS going in was 88 ppm for C1, 86 ppm for C2, and 84 ppm for C3. Runoff measurements were a little weird. The runoff pH for C1 was 5.9. The TDS was (at first) 600 ppm. I thought that was an incredible drop from the other day, so I did it again. It was 603 ppm the second time. Ok, moving along nicely! The runoff for C2 was pH - 5.8, and TDS was 1101 ppm. 😳 That’s a lot more than C1. C3 had a pH of 5.6, and TDS of 1212 ppm. Which is even more; so I measured a little more from C1 again, and the 3rd time it measured 736 ppm. 🤔 That seems weird to me, but I’ll keep an eye on it. If it continues to be that low then I will end up harvesting it before the others which won’t be so terrible. I’ll just have to wait and see. The temperature in the tent was 81F, and humidity was 47%. My ladies are looking lovely and growing better than I could have hoped for. This grow has been awesome, but I can’t wait to be done. Happy growing everyone! 27 Oct 2021 Feeding/flushing time again! I was somewhat perplexed the other day when I got the runoff reading for the TDS in C1. It was 500-600 ppm less than C2 & C3 respectively. Since I was having some issues with the TDS meter I thought that IT may be the cause. I made a note to check on it today, and there seems to be no problem with the TDS meter at all. Keep reading for details. My plants are still looking as lovely as I could ever have hoped for! C1 has started showing more color changes than the other 2, and the only thing I can say the difference is, is that I defoliated some of C1’s larger fan leaves last week, and wasn’t able to do the same for the other 2. That is the ONLY thing I can think of that has been different between all 3 plants this entire grow. Regardless, all 3 plants are looking wonderful! Today each of my lovely ladies received a gallon of property pH’ed water with an expected amount of runoff for testing. The preparation went as follows: C1 & C2 had an initial pH of 6.9, and C3 was at 7.0. I added 0.2ml’s of pH DOWN to each gallon which adjusted the pH of all 3 gallons to 6.3. TDS going in for C1 & C2 was 85 ppm, and C3 was 84 ppm. Runoff levels were different for all three plants. C2’s runoff pH was 5.7, and TDS was 1041 ppm. C3’s pH was 5.6, and TDS was 1059 ppm. Last time C1 was significantly lower than the others, and I thought that maybe it was a TDS meter issue. Evidently it wasn’t. C1’s TDS today was 526 ppm! 😳 still much lower than the others, and pretty much ready for harvest. The temperature in the tent was 81F, and humidity was 43%. Although harvest time is much closer, I don’t believe it will be done in time for this month’s grow diary of the month contest. So sad, but that’s life. Happy growing everyone! See you again soon. 29 Oct 2021 Today is the last day of week 16. I was planning on continuing the flush today, but remembered something that I had forgotten about…. I remembered the branch that had broken off of C1 back on October 10th in week 14. She had held on for well over a week in a can of water, but finally her leaves started to droop. I hung it up all by itself in my small tent to dry. Until today that is! I took it outside and trimmed it on my deck. Even outside, in a pleasant breeze, the amazing smell of this branch was easily detected. It’s kind of windy, rainy, and chilly here today, but still …. That sweet blueberry muffin smell was there. Her buds; still covered in the dried, crystallized trichomes were super sticky! I must admit that they are the stickiest buds I have grown to date. I weighed the dry bud to add to the grand total of C1’s harvest later. Then I ground it up and smoked it. All I am going to say is that from my reaction to smoking it; I have decided that no additional flushing is needed. After all, what I smoked today broke right before I started flushing, and I could taste nothing other than what I would hope to taste. So my fellow Growmies; I am ending this week right here. The next report you will see will be the harvest report!! Stay tuned!

Veg Week 3 The Plants DAY 22 - Transplanted T.O.5. Not Root Bound, but definitely could see the bright white roots all around the container. The plant started stretching almost immediately. So cool to see plants move. DAY 26 - Finished Transplanting for this week-- T.O. 2, 4, 5, 6, 7, 13 to ~1 gallon pots. Watering Starting watering every day toward the end of the week (Day 26). Days are starting to get warmer. Growing in fabric pots in Southern California typically requires daily watering starting in June. I've learned through the years that the plant just sucks up the water and boosts in size. The more water you can give it without rotting the roots - the bigger the plant. There are still differences in strains - some plants just like to get dry before the next drenching. Couple more weeks until the June solstice (June 20). Nutrients Building up the arsenal in my cupboard--Bud Candy + Overdrive from AN, Kelp Meal from Down To Earth. I usually don't add too much stuff because the soil is fairly loaded from the bag.

Big Buds

Un hermoso cultivo recuperado de algunas deficiencias, un armazón bastante bueno e increíble calidad de cogollos. Una planta que tuvo 121 de vida. Tuvo 60 días de flora

Light intensity was increased to around 1000 PPFD under stable conditions.☀️ Temperature stayed at ~25°C with ~50% RH. Both plants remained in their 20L final pots. Watering was done every 2–3 days, based on pot weight, using RO water + CalMag.💧 Additionally, the plants received 1x BioTabs Bio PK during this week. By the end of Week 6, the stretch was basically finished.🌿 Apricot #2 remained the tallest plant in the tent. Apricot #1 stayed more compact but looked overall better structured and more balanced. Bud sites were clearly forming, though still relatively small at this stage. A large number of pistils were visible, showing that the plants had fully transitioned into flower. 🌸 The first trichomes were already noticeable, but aroma was still subtle. Leaf color remained a healthy green, and overall plant health looked stable and strong.

Started a new grow in a 60x60cm Diamond box; Spiderfarmer SF-1000 (100 W) LED and some seeds i bought on vacation in the netherlands. I believe and hope it said something like Cookies and Cream Auto… Lets see xd Germinated on. 18.8

Hello everyone! I promised to track this grow very closely this time and ufortunately life got in the way. Here is a quick sumup of the grow. First of all- One of the sour stomper plants unfortunately didn't make it. It died at about week 4. The main stem somehow had rubbed/broken down. That's why it was falling down. It was almost like a mini beaver had chewed it off at the point where the stem touches the riot rooter. At first I thought nothing much of it, maybe it hasn't been rooted in quite well yet or something. And I was constantly touiching it when watering, that made it worse. Soo the leaves were dropping and the plant looked very weak. Then I decided cut thr rapid rooters top layer and found out the severity of the problem. Tried to tape it up and other things, but it was too late. At the end it appeared all good as the remaing plants got so big the I had some space issue so I wouldn't have been able to fit another plant in anyway. At that time I finally made my self-draining saucers. I took me a while and a lot of effort, but finally they were ready and working well. I also installed the self watering system and flowering was starting. Pretty soon I started noticing weird leaf symtoms. Brown spots, different kind. Some plants had it more, some less. Sour Stomper looked pretty good throughout the grow. Mango smiles seemed sensitive and Strawberry Nuggs were pretty strong until the end. The grow was basically me experimenting with the setup- changing watering schedules , changing ppm, ph and all that stuff to keep the leaves looking healthy and it was very hard I have to admit. Probably my hardest grow in that regard. But somehow, the bud leaves remained healthy and the buds really fattened up good. I got away with an amzing 700G dry bud harvest which was def a new record from one grow. And the bud quality is very good too! Next time definetly no more than 4 plants as they got pretty big and I thought it was a little overcrowded. I was doing some good defoliation too. I should have defolited strawberry nugs more tho. Sour Stomper got some amazing bud development from top to bottom because it was was growing next to strawberry nuggets which were really small most of the grow. They actually took the most time to harvest even longer than Mango smile. Mango smiles were ready quite early. Sour Stomper was just in time! I topped sour stomper and both Mangoi smiles, left SNs both normal. Looking back at it, the way I grow them, Should have topped SNs too. Would probably have more space in the middle and longer side branches. Probably wouldn't have been as bushy! I followed the full Terra aquatica feed chart until the end. I was supplementing with CalMag a lot as I thought the symptoms could have been from a CalMag deficiency as this was my first grow with RO water. Overall a very challenging but good grow at the end. First time no mold problems. A record breaking yield for me. Basically surpassed the upper limit for all plant probable harvest sizes. Got good smelling quality bud. Very happy overall and will continue experimenting with Mephisto beans in the future for sure! I guess what I like the most about Mephisto is how close to description the plant is, very stable genes in that regard. Next time I will also have to start feeding plants higher PPM feed faster at the very start. and during flowering. But still not 100% sure what caused the leaf symptoms.

Que pasa familia, hemos vuelto para actualizar las skunk que ya tenemos cosechadas. Que gran genética, y muy típica entre fumadores de hierba, un crecimiento más indico pero floración lenta bastante lenta, en teoría se supone que es Sativa, 17% thc en la tas con un tamaño medio pequeño pero flores mi compactas y dulces, un cultivo ni fácil ni difícil, sin más, bastante neutral para los cambios climáticos algo sensible con el aspecto alimentación. La recomendaría en verdad, sobre todo para aquellos amantes del dulce. Nos vemos en próximos proyectos fumetillas

The critical soma looks very healthy. I think she will be ready in 2 big weeks. The two Dinamed look also good but may be a few days more. Trichomes are clear, aren't it? Thx Edit: a little bit to much nutrients for the critical but it's now OK.

FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

.