Good growth this week. Thinking i could top end of this week was obviously too optimistic, but i will be able to this week. The plant with the stronger stem is still the most vigorous one, definitely keeping her. The others are doing fantastic too tho, I can see the beginnings of the 4th node already. The white clover is coming through, it will have about a month time to grow till i’ll chop most of it. I’ll leave some near the edges of the plots. Added some old pics of the bamboo I’ll be using to support the plants outdoors. Should be plenty long haha. Excited for the coming week! Growth is speeding up and they’ll soon get their first training.

Muy buenos resultados para el poco cuidado por falta de tiempo! Una maravilla.

One of the ladies is still ill ... 🤷

-------------------------------------------------- Day 8 Water: 50ml RO water Humidifier: 65% (MID-MIST) Fan Speed: Mid-Low Light on @ 19:00 (23° celsius @ 76% RH) Light off @ 13:00 (19.5° celsius @ 54% RH) ------------------------------------------------- Day 9 Water: N/A Humidifier: 70% (MID-MIST) Fan Speed: Mid-Low Light on @ 19:00 (22.5° celsius @ 74% RH) Light off @ 13:00 (19° celsius @ ~84% RH) ------------------------------------------------- Day 10 Water: 50ml RO water Humidifier: 65% (LOW-MIST) Fan Speed: Mid Light on @ 19:00 (22.1° celsius @ ~75% RH) Light off @ 13:00 (19° celsius @ 70% RH) ------------------------------------------------- Day 11 Water: N/A Humidifier: 65% (LOW-MIST) Fan Speed: Mid Light on @ 19:00 (23.3° celsius @ ~70% RH) Light off @ 13:00 (20.7° celsius @ 66% RH) ------------------------------------------------- Day 12 Water: N/A Humidifier: 70% (MID-MIST) Fan Speed: Mid Light on @ 19:00 (23.4° celsius @ 66% RH) Light off @ 13:00 (19.9° celsius @ 70% RH) ------------------------------------------------- Day 13 Water: 150ml RO water Humidifier: 65% (MID-MIST) Fan Speed: Mid Light on @ 19:00 (22.3° celsius @ 72% RH) Light off @ 13:00 (21.5° celsius @ 67% RH) ------------------------------------------------- Day 14 Water: N/A Humidifier: 65% (MID-MIST) Fan Speed: Mid Light on @ 19:00 (24.5° celsius @ 63% RH) Light off @ 13:00 (22° celsius @ 65% RH) -------------------------------------------------

Week 4 Still no good weather. Rain and some sun +-15 Celsius . In the end of week 5 25 Celsius good weather

Strain is actually very easy to grow so i would recommend it even to begginers. Robust plant that did very well on topping, hst and lst training. Buds are thick and heavy. They release very pungent and piney smell with deep tones that reminds grape. After a week of drying i did some bud testing and i would describe the high as awesome physical stone with a bit of euphoria and happiness. Cant wait to cure the buds for a couple of weeks. Peace and be safe!

Preflowers coming in

Used 300 watts, produced over 400 grams of dry, extremely dank cookies. Thanks to top quality genetics, lights and nutrients.

----------- Week 6: ----------- Start of the 2nd week of real flowering. The slight discoloration of the lower leaves continues. Not the biggest problem in itself, but would have liked to see it differently. Her general health is good, but next time I will opt to use a biotab less. 2 pieces seem more than enough. That is why I waited an extra 10 days to give her the one-off treatment of bactrex and orgatrex. It is a solution of 1gr bactrex and 20ml orgatrex in 500ml water to boost bacterial life. She has just received this and she will only get this once. We also set up the dehumidifier to keep the humidity around 50-55%. And we have now also switched on the digital lumatek boost, for maximum light intensity. Since we also don't work with a scrog net (which we really have to consider next time), I already had to tie her in a few places to make sure her shoots do not fall over. But this is a positive 'problem'. Until next update!

No problems just steady grow haven't added any extra nutrients

Went to check her under the glass for the first time and she was ready before I was lol...hopefully she smokes as good as she smells

❄️Après 53 jours de floraison j'ai récolté 2 plantes de kong's krush qui m'ont donné 41 grammes de bourgeons sec et manucurées. ❄️Je pense que j'aurais pu ajouter + de nutriment dans mon sol et arrosé plus fréquemment pour avoir un plus gros butin, c'est prévu pour la prochaine culture ! ❄️Je commence à gouter mes bourgeons qui sont encore en train de curer depuis 5 semaines. ❄️Chaque variétés ont des saveur particulière et j'ai toujours ça trouvé assez complexe de les décrire. En tout cas La saveur de la kong's krush est vraiment inédite pour moi et vraiment plaisante. Je lui trouve un petit coté pétillant,☄️ ❄️ ❄️Mon instagram : https://www.instagram.com/hou_stone420/ ❄️ ❄️Passez une bonne journée mes amis, Merci pour votre visite 🙌 ☄️☄️☄️☄️☄️☄️☄️☄️☄️☄️☄️☄️☄️☄️☄️☄️

All good, started lst and feed boost flores pk13 next water

08/26 - Increased water feeds with increased nitrogen - Prepped using clonex mist and clonex gel for cuttings - Pulled 10 clones on the first gen set

1/12/26 4:18AM MONDAY.....💪💪💪💪👌 1/12 CANNAKAN DAY EDICINAL SLAVERY WOULD MAKE HARVEST A BREEZE!! ABOUT THE LEDS Yes, the **Samsung LM301H EVO diodes** in your Mars Hydro lights (likely an FC-E series like FC-E3000, FC-E4000, or similar) are among the most efficient horticultural LEDs available right now—individual diodes hit **3.14 μmol/J** efficacy, pushing the whole fixture to around **2.85–2.9 μmol/J** PPE (photosynthetic photon efficacy) in manufacturer specs and independent tests. That's top-tier for full-spectrum grow lights, meaning they convert more electrical power into usable plant photons than older diodes or cheaper LEDs. If they "seem more efficient than the PPFD meter says" (your plants thriving at lower wattage/height adjustments), that's actually common and not a contradiction—it's often the **real-world efficiency** shining through once nutes/stress are fixed. Here's why this happens and what your recent wattage drop (a few more watts lower) likely means: ### Why Samsung LM301H EVO Can "Seem" More Efficient Than Raw PPFD Readings Suggest - **High PPE + Uniform Distribution**: These diodes excel at producing photons in the PAR range (400–700nm) with minimal waste (heat/loss). Mars Hydro FC-EVOs achieve strong average PPFD (e.g., 750–1000+ μmol/m²/s in tests at recommended heights/power) with even spread—no hot spots wasting energy. When your nutes were suboptimal (Advanced Nutrients issues), plants couldn't fully use the light (wasted photons → stress, stretch, lower efficiency). Now dialed in (GH powder + aminos + mycos), they convert more of that PPFD into growth—making the light "feel" stronger/more efficient even if meter numbers stay the same or drop slightly. - **Meter Limitations & Calibration**: - Handheld PAR meters (especially cheap/older ones) can under-read full-spectrum LEDs like LM301H EVO (strong white + red enhancement). They often have poor spectral response to the exact mix, reading 10–30% low compared to pro tools (Apogee SQ-500) or calibrated apps. - If you're using an app like Photone (mentioned in your diary), it's generally more accurate for Samsung full-spectrum lights (especially on iPhone; Android varies but often close with diffuser/paper). Many growers report Photone matching or exceeding cheap handhelds on LM301H setups—sometimes showing higher effective PPFD than a basic meter implies. - Bottom line: Your plants are the ultimate meter. Thriving (miraculous growth, no burn/stress) at lower wattage means the effective usable PPFD is higher than a potentially under-reading meter suggests—efficiency win. ### Your Wattage Drop & What It Means Lowering by a few more watts (on top of the earlier ~10% drop) is smart and aligns with the efficiency gains: - Dimming on Mars Hydro FC series is **very linear**—tests show PPFD percentage tracks close to (or slightly above) the dimmer % because diodes run more efficiently at lower currents (less heat/loss). - Example: Dropping from 100% to 90% might only reduce PPFD by ~8–10%, not full 10%, due to that efficiency curve. - Your plants handling it (still "miraculously better") without stretch or pale leaves confirms the sweet spot: likely 450–650 μmol/m²/s veg/late veg range now, with room to push if pistils emerge. - Solar bonus: Every watt saved = less battery drain on cloudy days, cooler tent (less fan/AC draw), and more headroom for extra plants without spiking consumption. **Practical next steps**: - Recheck PPFD (if using Photone/handheld): Average multiple canopy spots at current height/power—aim 450–600 for late veg autos, 600–800 early flower. - Watch response: If nodes stay tight/dark green/no cupping, you can drop another 5% or lower height slightly for denser canopy. - Log kWh if your inverter shows it—track the drop to celebrate the savings. - If meter still "under-says" vs. plant performance, trust the plants more—Samsung EVOs are proven beasts when the rest of the grow is dialed. This is textbook optimization: nute fix → better photon use → lower power for same/better results → solar efficiency skyrockets. You're building a truly lean system. How low are you at now (e.g., 70–75W total?)? Any pistils or new growth explosions today? Keep the momentum—it's paying off big. 🥊🍌👨‍🔬🚨🌞💪💪💪💪💪 1/15/26 12:36AM L-Phenylalanine: https://pubchem.ncbi.nlm.nih.gov/compound/L-Phenylalanine#section=Crystal-Structures That’s your Mars Hydro bar-style LED grow light setup in a compact grow tent (looks like a 2x2 or similar Spider Farmer tent branding on the mylar walls), running super efficiently right now! Breaking down what I see from the photos: • The light is a multi-bar LED fixture (probably from Mars Hydro’s FC series, like FC3000, FC4000, or a smaller EVO variant) with Samsung LM301H (or similar LM301B/H EVO) diodes—these are high-end, efficient chips known for uniform distribution, low heat, and great full-spectrum output (warm white + red/IR boosts for veg/flower). • It’s hung at 19 inches (measured from the light bars to the canopy or sensor plane, with that white dotted line marker). The tent shows a hygrometer/thermometer combo reading 76°F / 53% RH (nice stable veg conditions—cooler side helps prevent stretch). • Your PAR meter app is showing 327 μmol/m²/s PPFD (Photosynthetic Photon Flux Density) at that spot/height—solid reading for where you’re at. • Plants look like young cannabis in veg stage: multiple small pots (fabric or repurposed buckets like Krøger cottage cheese tubs—classic budget move!), healthy green canopy with some colorful accents (maybe early purpling or strain traits), topped or in early training, sitting in coco coir or similar media. • Power draw: ~50W current (from the energy usage screenshot), averaging super low over time (0.48–0.76 kWh daily average). That’s impressively efficient—likely dimmed way down or a lower-wattage model (e.g., 150–300W rated, but running at partial power). Total consumption over 30 days at ~14.5 kWh is pennies on the electric bill. This aligns perfectly with your earlier plan to target ~500 PPFD but getting great results at lower wattage/intensity. Right now at 19” and 327 PPFD: • That’s in the sweet spot for early-mid vegetative stage cannabis (typical recs: 300–600 μmol/m²/s for veg, starting lower ~300–400 for young plants to avoid stress, ramping up as they bush out). • Bar-style lights like this excel at even spread (no hot center like older quantum boards), so your canopy is getting consistent light without bleaching or stretch in spots. • Low power (49.6W) means minimal heat buildup—fans and passive cooling handle it easily, keeping temps/RH dialed (76°F/53% is golden for veg; prevents mold and encourages compact growth). Why it feels “great results at lower than recommended”: • Samsung diodes are top-tier efficient (often 2.8–3.1 μmol/J), so you hit usable PPFD without cranking full power. • Many Mars Hydro FC models recommend 18–24” for veg at 50–75% dim (your 19” fits right in). • Your plants are responding well—lush, no obvious deficiencies/stress, and you’re feeling physically ready to top/fill pots after the delay. To push toward your 500 PPFD goal without overdoing it: • Lower the light a few inches (try 16–18”) incrementally—PPFD scales roughly with the inverse square law, so dropping height boosts intensity noticeably (could jump 20–50% depending on spread). • Or bump dimmer % if it’s not maxed (your 50W draw suggests plenty of headroom). • Retest PPFD at multiple canopy spots for average (center often higher, edges lower in bars). • Watch for tacoing/upward leaf curl (too much light) or stretch (too little). This setup is dialed for low-energy, healthy veg growth—perfect for your “lower wattage wins” approach. Plants are happy, tent’s stable, and you’re crushing it efficiency-wise. If you drop the height or dim up, snap another meter reading/pic—I can help fine-tune further. How old are these ladies (weeks from seed/clone)? Any specific strain notes, or planning to flip to flower soon? Keep the momentum—today’s a win! 🌱💪😂

It's time to harvest them but this I wasn't there for last 2 weeks had humidity issues causing bud rot