Almost at the finish line with these beautiful girls!!! Smells like someone is shoving an orange up my nose whenever I open the tent. Adding a new light to the grow for the next run so stay tuned!!!

Glorious summer sunny days 🌞🌞🌞 The plant has now started blooming well 🌷🌷🌷 Third week of Light Deprivation 👉👉👉👉Every morning at 8:30 am I move the plant in the greenhouse. 👉👉👉👉Every evening at 8:30 pm I move the plant (together with some other strains) inside the growroom (which I don't use in the summer) Before I placed the plant in the growroom, I took these photos outside on the lawn 👉 Once a week I give the plant a liquid booster with OPF 4:2:8 ; Fulvic 25 ; Yuccah ; Biovin liquid ; Earthworm compost extract. Big Thanks to Luc from Plant Health Solutions / Bioplantenvoeding dot nl 🙏🙏🙏

W19 (Harvest) 6-6 Last day before harvest. 7-6 Harvest day! Installed a humidifier outside the tent, set to 55% aiming for a 60% humidity inside the dry tent. 17-6 After 10 days of drying she is ready to be trimmed. While posting this a couple of months later i found out that i totally forgot to make pictures and video's of the trimmed buds 😅 End result #1: 37 Grams of dried buds. 35.84 Grams of dried trim and very small buds, into the freezer. I would describe pheno 1 as normal frosty, almost stone like buds, smells chemical with hints of dish soap (i really like it!) I cant describe the taste but it was very tasty out of the box, before the cure, very sad i only had 37 grams of it haha. End result #2: Around 70 grams of dried buds. 43.23 Grams of dried trim and small buds, into the freezer for bubble hash. I would describe pheno 2 as very frosty buds, little bit fluffy, smells very gassy, with a nice sour taste after curing a couple of months. Very interesting strain, i will definitely grow it again! I have some trim and small buds saved up from different strains and i will be posting a diary of the full process making hash of them! If you are interested in me making bubble hash feel free to follow me as i will make some in the next month, this way you keep notified!

Got some better shots without light and a little video my cam is a bit shit got a video of trichs also in there girls seem to be flushing well started flushing the quick one later than the others as wasn't as developed. Took the 2 tester buds of very bottom under the plants on the first day of flush to try estimate how long to flush for........last pic and vid before harvest next uploads will be harvest hopefully

Day 15 so start of 2nd week veg. The Strawberry Gorilla auto looks is growing every day. So far any problem waiting for her to grow a bit more before start training. Day 18 FIM time. Thanks for following my diary if you like i have instagram page too that trying to post photos and video every day.

Wow!!! fast flowering !

Still as hot and dry as I've ever seen and she loves every minute of it. All the fimming has lead to this beautiful bushy shape I've been going for. Did some light defoliating, which is crazy early for me. She's nearly 3 times the size I'm used to for this time of the year. I cannot wait to see how big she'll be by Oct. Nothing but 2 hours of drip and my regular Neem/Aloe/Kelp/Epsom folar spray this week. She's been so incredibly easy to deal with, really love Blueberry. Had a MUCH welcome 6mm of rain one night as well.

Week 2 on these lady's

LSD Zamnesia Tripping 🙂 | Fresh Frozen, Ice Water & Temple Balls — Week 16 From Seed First of all… Yes 😄 We are once again dividing the harvest reports into multiple chapters, and once again we apologize for that. But honestly, there was simply no way to fit: * harvest, * drying, * trimming, * curing, * smoke review, * macro photography, * fresh frozen work, * washing, * extraction, * and hash making… …into a single GrowDiaries update without rushing through important parts of the process. And this part? This part deserved its own spotlight completely. Because this week was not about flower anymore. This week was about resin. Living resin. Fresh frozen material. Ice water extraction. Patience. Cold temperatures. Sticky hands. And slowly transforming trichomes into beautiful hash. For everyone joining only now, quick recap: These LSD girls were grown under 12/12 from seed from the very beginning. Minimal training, mostly natural structure, gentle leaf manipulation, and environmental balance instead of aggressive intervention. Part of the harvest was dried traditionally and already covered in the previous report. But another part… …never got dried at all. Straight during harvest, selected flowers were removed fresh from the plants and immediately vacuum sealed before going directly into the freezer. No drying. No curing. No waiting. Fresh frozen. And that changes everything. The goal here is preservation. When flowers are frozen immediately after harvest, a large portion of the volatile compounds: * terpenes, * flavonoids, * aromatic compounds, * and delicate resin characteristics… …can remain much closer to their living state compared to traditionally dried material. This is why fresh frozen extraction became so respected in modern hash making. It captures a version of the plant that only exists for a very short moment in time. Alive. Wet. Fresh. Fully expressed. And honestly? Opening those frozen bags weeks later felt like reopening harvest day itself 😄 The flowers still looked incredibly resinous even after sitting frozen for weeks waiting for wash day. Now let’s talk process. For the wash itself, we used the Bubbleator machine courtesy of Zamnesia , and honestly huge thanks to them for providing it. They knew I wanted to start exploring ice water extraction properly, and they were kind enough to support the journey. The setup itself is actually beautifully simple. First: ice. Lots of ice 😄 The machine was filled partially with ice first before adding the fresh frozen material inside the working bag. The flowers themselves were placed inside a closed 220-micron washing bag. This is important because the bag keeps the plant material contained while still allowing the trichome heads to separate during agitation. After placing the material inside: * more ice on top, * cold water added, * everything submerged, * and then… …we waited. Around 30 minutes or so. And this step is actually extremely important. A lot of people think washing starts when the machine turns on. But honestly? The wash starts before that. This resting phase allows the frozen material to: * slowly rehydrate, * absorb water again, * become fully saturated, * and most importantly… * become extremely cold throughout the entire plant material. Why does this matter? Because trichomes become brittle at very cold temperatures. The colder everything gets: * the easier the resin heads separate, * the cleaner the release becomes, * and the less physical force is required. That is also why ice exists under and above the material: * lower temperatures evenly, * protect the resin, * and maintain the cold environment throughout the wash. Once the water temperature approached near freezing… …the machine came alive 😄 And honestly? Watching the water slowly transform during the wash is always magical. At first: just ice, water, and flowers. Then slowly: foam, cloudiness, resin separation, and finally that beautiful milky golden water hash makers love seeing appear. Meanwhile on the side, we prepared the filter bags. We did not use every single micron separation individually because honestly sometimes over-separating becomes unnecessary depending on goals and material quality. Instead, we focused on collecting the grades we actually wanted to work with and enjoy. And then came one of the most satisfying parts of the entire process: Collection 😄 Slowly lifting the bags. Watching the resin gather. Carefully scraping. Separating grades. Observing texture and color differences. Beautiful creamy resin everywhere. Some lighter. Some slightly darker. Some sandy. Some greasy. Every layer carrying slightly different characteristics. After collection, the resin was carefully freeze-dried. And this part also requires patience. First freeze drying. Then breaking it apart. Then more drying. Then more waiting 😄 Depending on environment and conditions, full drying can take several days because trapped moisture inside hash is dangerous long term. Rushing this step can ruin months of work later. In this case, the process stretched closer to about a week before everything felt properly stable and ready to work. And honestly… This is where the magic really started. Once dry enough, we allowed the hash to rest briefly before beginning the hand-working process. No extreme heat. No giant pressure. No fancy machinery. Just: room temperature, body warmth, gentle pressure, folding, rolling, stretching, and patience. The room itself stayed around 15°C, which turned out to be perfect for working the resin slowly without overheating it. And this step matters far more than many people realize. When hand-working hash properly: * oils redistribute, * compounds begin merging, * terpenes spread through the material, * oxidation starts slowly, * texture evolves, * and curing begins transforming the resin itself over time. You are not simply “rolling hash.” You are starting a living curing process. And slowly… The texture changed completely. From sandy loose resin… to creamy material… to sticky dough… to smooth beautiful temple balls. Honestly, seeing that transformation happen in your hands never gets old 😄 Final result? Three temple balls total: * two smaller ones from smaller micron collections, * and one large main temple ball that became the true star of the session. Final weight: 46.5 grams.( big one ) And honestly? I was extremely happy with that result. Especially considering the quality, texture, color, and how beautifully this LSD washed overall. Once formed, the temple balls were wrapped carefully in parchment paper before being vacuum sealed for long-term curing. And now? They rest. Months. Maybe longer. Waiting. Because the goal here is not “fresh hash.” The goal is evolution. Traditional temple ball style curing allows: * oils to redistribute, * compounds to merge, * texture to transform, * aroma to deepen, * and the entire resin profile to mature over time. Almost like aging wine. Or curing cheese. Or fermenting traditional products slowly and intentionally. This is medicine with patience built into the process. And honestly… That part alone deserves respect. We also included: * detailed process photos, * collection stages, * macro photography, * texture closeups, * curing progression, * and multiple stacked macro images showing the resin in insane detail. Some of these stacks reached: * 62 frames, * 87 frames, * 114 frames, * and even 152-frame focus stacks. Because honestly, hash under macro magnification becomes another universe completely. The textures stop looking real. Tiny resin mountains. Oil rivers. Micro-crystals. Glossy surfaces. Soft creamy structures. It almost starts looking geological instead of botanical 😄 Mr. Baggy of course supervised the entire operation like the professional resin inspector he clearly believes he is. And next week… The final chapter arrives. Smoke review. Curing review. Flower review. Hash review. Terpene evolution. Effects. Textures. Lessons learned. Mistakes made. And final thoughts after this entire LSD journey from seed to cured medicine. And finally… Thank you. To Zamnesia for the genetics and the Bubbleator. To Plagron. To F.O.G. To all the LEDs, gear, and equipment involved. To GrowDiaries. To the community. To the OG followers. To the new curious visitors. To the silent supporters. To the skeptics. To the lovers and even the haters 😄 To everyone spending time sharing this strange beautiful plant journey with us. Wishing everyone: cold water, sticky fingers, healthy plants, beautiful resin, and enough patience to let good hash become great hash 🌱

☆♡ Gorilla Cookies: I've noticed a leaf fell off the bottom. I think I may've overdone the nutes. She's growing tremendously. I top dressed with the below, as the rest of my plants. I will only use PH'd water for the next several waterings, probably with Biosys or seaweed. ♡☆ 16.2.25: I decided to check out the lower canopies of all plants to see if I need to get rid of any foliage. I did get rid of a few small branches and leaves. However, whilst I was doing this, I saw more garden pegs from my LST remaining. There were about 6 or more in Pink Mist alone. Additionally, on Watermelon, there were some left in, too. I'm so annoyed to see that because the plants are really stretching, and I could've potentially disrupted this by leaving the pegs in for all this time without realising it. 🤞 that I haven't compromised things too much. We'll see. I watered today with 2ltrs of dechlorinated water PH'd to 6.3 containing the following nutrients; ♡ .8g Green Leaf Nutrients PK booster ♡ .5g Ecothrive Biosys I ordered quite a few things for the garden. I got Greenleaf Nutrients Sea K(elp) and Mega Crop Parts A+B. To go with their PK Booster I got last month. I'm excited to try it all together. Next run, maybe just using these. We'll see how it goes. 18.2.25: The plants are going crazy for water! Everything is getting used right up so fast! Today, I decided to add some more Black Strap Molasses to add some carbs and other micronutrients. I'll add the jar with the label in the photos section above. I watered a very small amount to each plant. What I put in: ♡ Black strap molasses 150g ♡ 2g Sea K(elp) Greenleaf nutrients. I dissolved everything in 4ltrs of dechlorinated water PH'd to 6.4. 19.2.25: I received the majority of the garden purchases that I made. I'm still waiting for the Ecothrive Life Cycle. I wanted to top dress, but it's been delayed unfortunately. I am using my Greenleaf nutrients products which I bought on Amazon. I got the Mega Crop 2 part system Part A and Part B. I have the Sea K(elp), and the bud explosion PK booster. I really wanted to get some of their sweet candy asking read many positive reviews. Unfortunately, for me, this is unavailable to buy currently. So that's a little disappointing. I needed to do a good watering so when my nutes were delivered today, I got excited 🤗 I watered 2ltrs of dechlorinated water per plant, PH'd to 6.4, containing the following nutrients: ♡ 1g Mega Crop Part A ♡ 1g Mega Crop Part B ♡ .5g Sea K(elp). The plants drank this up within a few hours. I'm going to try and hold off on watering in hopes that my Ecothrive Life Cycle will arrive so I can top dress and water it in then. 20.2.25: My Ecothrive Life Cycle arrived yesterday, and the plants are ready for their top dress and a good watering in. I have some Biobizz Light Mix, Canna Coco,and perlite. I'm going to use this as a base to mix my amendments in. I'm going to fill my 5 gallon bucket with about 4.5 gallons of my top dress mix. I will distribute this across 6, 4-5 gallon pots. Then I will water in well with Greenleaf nutrients Mega Crop Parts A+B and Sea K(elp). I've made a crude attempt to video mixing my top dress. Don't listen to the audio. lol, my YouTube didn't stop playing whilst I recorded this 😂 So anyway, I added the following amendments to the above base mix of 4.5 gallons; ♡ 3 TBSP Ecothrive Life Cycle ♡ 3 TBSP Vitalink Bat Guano ♡ 3 TBSP Ecothrive Charge ♡ 1 TBSP RHS Mycorrhizal Fungi granules ♡ 6 TBSP Ground Cinnamon.

Week 7 Flower Let the Flush commence! 💦 Both girls started flush on Day 41. Twin2 is definitely finishing sooner than Twin1, but as they've both been tested the same, they'll both be taken down on the same day after a 14+ day flush. We're having a rise in heat in my area so it's interesting to see how each pheno reacts. Twin2 seems to be showing slightly more heat stress, by shooting a few fox tails, but at this size it's only a good thing 😉 I've also only just found a new trait being expressed on both twins, but much more consistently on Twin1, and that's the double serrated leaves you can see in the photo's. It doesn't mean or affect anything, it just a cool trait 🍁 I run approx 30+ltr water through each pot each time they're flushed. Before doing so I check the ppm and pH value of the run off from each pot and take records. To do this, I gently pour a few litres in the centre of the pot until a sufficient amount has drained into the tray below. This can then be tested with your TDS/EC pen and pH pen. I still use Activated EM1 (EMA) throughout flush at 1ml/ltr because microbes are always a benefit. Once stretched/activated it goes a very long way so if I don't use it throughout flush, then it may go over it's 6-8week shelf life. They're both looking great and still filling up. Both twins are coated in trichomes and have their own distinctive smells. They both smell very floral; Twin2 smells a lot sweeter, but Twin1 has a more earthy, almost gassy kind of smell to her that's just as nice. These girls are definitely not making my choice any easier yet! Looking forward to seeing them fade. Thanks for following and happy growing! 🐺

This was a pretty stable week. I finally moved my flowers to the new growing area I’ve created. It’s powered by Gavita Pro fixtures and Phillips mastergrow bulbs. They have been in here for about 3 days at this point. From now on my future diaries will showcase more plants, larger scale, but still with artisan minded craft. Excited for what the future will bring, almost as excited as I am to cut down these plants when they take on their fall colors over the next 3 weeks! I’m Expecting a harvest of 1-1/2 oz per plant, but may get more or less. Time will tell.

Little hifeo

Start of Week 9 🙌 I plan to use fertilizer for bud growth from day 64 to day 70+... depending on when the harvest time occurs 😉😄👍 Started working with fertilizer today, every 2 days a mixture of 10ml per liter as long as the buds have not properly developed trichomes 😵 I hope this works 😵😲😱 Day 68 with fertilizer again

2nd girl still falls behind, I decided to use a scrog to help her / or help the canopy situation as the height difference and even lighting distribution started to be complicated to mantain got little tip burn so I dialed back and pit Grow aside. From top you can nicely see which girl is which. Margot having more poison green top leaves. Is she angry?

She’s still stretching! This week I removed Voodoo Juice, Tarantula and Piranha, and added B-52 and Bud Factor X (never tried this one before). Since the princess loves this 2ml/L dosage for NPK nutes, I’ll not be touching that for the moment. That seems to be the optimal dosage for a sativa like this. Very nice!

Day 24-31 (Day 25) The smell in here is absolutely ridiculous. My last grow didn’t smell even close to this bad in early flower. (Day 27) Stretch is finally all done. #6 in the back is very stout and barely stretched compared to everything else. I doubt it will yield much but I’m excited to see the nice tight colas on it. It seems to be still getting adequate light and raising it up is hard to do with a scrog net so I will just leave it. If it wasn’t getting enough light it would be stretching right? The early frost is really shocking to me. My last indoor round definitely wasn’t this caked and I’ve never had an outdoor plant on this level either. That’s also true in terms of smell too. (Day 29) I’m still debating whether I should feed anything in flower or just leave it. The only deficiency I’m seeing is purple stems from P def which could actually just be from light intensity rather than a lack of P. I’ve done some thinking and I’ve decided to only feed my small plant. What I’m most curious about is if a PK boost will actually make any kind of a difference in flower when it comes to bud size and smokability. So to test this theory I will be top dressing a teaspoon of 0-18-0 bat guano, a tablespoon of 1-4-2 Destiny launch and a half strength watering of 0-0-15 kelp extract. I’m trying to avoid N all together as I just toxed my guinea pig plants with another experimental flowering PK boost that had a very small amount of N in it. This plant in particular actually has very early signs of N def and probably will fade harder than the rest. (Day 31) Shit. Looks like #1 is starting to herm. It’s definitely not environment or light leaks so maybe it’s just genetic or the recent leaching stressed it out too much. Either way, it’s only a single lower branch and I’m prepared to cut her down if I start seeing anymore. I double checked every other budsite but couldn’t find anymore. In my experience true herms usually start pushing bananas out of the main tops and plants like mine can usually be salvaged with little to no seeded bud. But then again it’s day 31, when these things usually start to happen. I’m 50/50 on this one. I will be watching it everyday like a hawk if anymore show up. The breeder I’m using, ‘Jordan of the Island’s’ is notorious for having unstable genetics and this will be the last time I run any of his stuff. The quality is good, certainly better than most European and Dutch genetics I’ve run but I know I could do better where genetics are concerned. I can’t wait to start hunting my archive dosidos x gelato 41 and in house sugarcane.

KICKASS AUTO by KANNABIA Week #5 Apr 30th- May 7th This week was the last week of veg as she started to pre-flower towards the end of the week she's 16 inches and so growing she has side branches that are also growing at a good rate she going to be a shorter busy lady. She looking 👍 nice and green no issues this week. She's loving being outside!! Stay Growing!! KANNABIA.COM KICKASS AUTO

09/06 - DAY 43 - Slight yellowing and spotting on a few of Mo’s older fan leaves, thinking Mag deficiency. Everyday more and more trichomes coming in. - Forcing Jane to open up by pulling her out. 09/08 - DAY 45 - Top dressed Mo w/ Worm Castings & Kashi Blend. Can see feeder roots everywhere under the cover, worms are active, and she’s sucking dry her reservoir every 1.5 days. - Lowered light to 500-560PPFD at canopy. Humidity ~58%. - Jane is starting to share her strawberry aromas. Mo smells like a sweet sugary treat 09/11 - DAY 48 - Switched over to only blooming/fruiting inoculants & top watered w/ compost tea. Hopefully get ahead of any deficiencies. - Mo is starting to drink 2 Gal in less than a day, along with the weekly top waterings. Thirsty girl 😃