After the repot they looked very much happy 💚 I repotted with biobizz light mix soil and a lot of perlite,as much perlite as soil cause I'm afraid of root rot and it just works for me🖤 also I still haven't given any nutrients cause they don't seem to want them yet. I put on the fans so that they have some ventilation and to strengthen the truck. they have grown so much in a week! I'm amazed! I also added another Mars hydro TS 600 so that they get all the light they need and hopefully speed the process up a little. 💚

The plant is doing fine, the light has been a bit to close to some buds so light bleaching appeared (Light is raised) Getting close to harvest and the plant smells really sour and citrussy, its amazing.

So, here we are in the final week. I think it’s been a laborious but pleasant journey. In retrospect, I believe things went well, even with some mistakes I made along the way: 1-At first, I thought the Gorilla Z seeds were actually Gorilla Cookies (yeah, I know—big mistake from a small detail). So I planned a 12-week cycle for those plants, only to later realize they were actually 10-week strain. I don’t think that was the right decision either, because while 12 weeks might have been a bit too long, 10 weeks definitely wouldn’t have been enough to fully develop their genetic potential. 2-Following the same logic with the Gorilla Z, the Atlas F1—originally a 10-week strain—would probably have benefited from an extra week, making it 11 weeks total (at least with my setup and nutrients). 3-I think I may have put too much stress on the plants during the LST process, which reduced the final height of most of them. I think all three genetics are very resilient and strong—especially Gorilla Z, Afghan Pearl stands out as a particularly stable and resistant strain. As for Atlas F1, even though it was the one I neglected the most (sorry about that), it still showed impressive overall stability and resilience. tomorrow morning gonna cut them.

Plucked a few more leaves but other than that just feed them this week including bloom. Also gave them some rice starch (from boiled rice water collection) on day 42 as a boost for the microbes 👍 Turned the IR off now and turned up to 34000lux

What up fam, weekly update on these lovely ladies. I put the scrog net out this week for support and am I glad I did. Only after a couple days they grew right through it. The greenhouse is 6'5 feet tall and they're pushing 5'6. I'll go in there and take off some of the lower fan leafs at the bottom but not to much defoliation needed. I'm seeing preflowers so I'll also switch the nutes from grow to bloom. All in all Happy Growing.

New week in supported marshydro grow FLOWERING TIME last run i did it under a TS-1000 But this time it will be under the amazing FC-4800 i am so excited to boost up everything and see what i can approve from last run 🤘🏻🤘🏻 Starting to put them in 12/12 schedule they have bin put in darkness for 12 hours and now hopefully let the flowering Begin fucking love this stage 🤘🏻😎🤘🏻 27/10/21 All plants Transplanted in 11L fabric pots added 5gram Easy Roots - Mycorrhiza Mix to soil Have some ideas for my grow tent I have my plants on hard plastic pallet And i ordered plateau with ball bearing So i can turn my plants around with one spin 😎 basically a huge turntable wikiwki Will be updated soon happy growings Growmies visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter

Her 2nd week was pretty good,she could be a little bigger with a few hours more of sun that's why I moved my plants almost everyday.she looks very healthy let's see how she performs

Привет друзья. Моей растихе сегодня 28 дней. Начал применять LST технику на 19 дне и продалжаю применять её через день, а 18 августа добавил ДЕФОЛИЗАЦИЮ С 20.08 ДЕФОЛИЗАЦИЮ делаю каждые 3,4 дня С 20.08 применяю технику LST каждые 3,4 дня На сегодняшний день влажность 63% Растение растёт хорошо. генетика радует. Всем мира и добра! #Smail_Seeds

Changed solution and they all look healthy.💉🌊 Even managed to get the runt into a bucket. 🌱 Gonna cut some lower growth into clones before the weeks end. ✂️😊

First week of adding Resin finish to stop cel devision and increase trichome production. Dropped ec to 1.35 No change on buds just yet other than mild rusting / deficiencies. Maybe light increase is trichomes. Purchased a jewellers loupe so i can now watch the trichomes ripen

The plants are demanding way more nutrients at this stage - and unfortunately, they’re almost outgrowing the grow space 😅. We’re seeing medium-level deficiencies across the board and some mild heat stress (tacoing leaves). To fix this, we’ll start adding fertiliser with every watering for the next 4–5 rounds and see how the new growth looks. The flowers still have the potential to become A-B-S-O-L-U-T-E-L-Y massive, so we stay calm and just feed, feed, feed! 🚀🌸 Stats so far: 💧 Watering: 1.5L every other day 💦 Humidity: ~65% RH 🌡️ Temp (lights on): 22–26°C 🌡️ Temp (lights off): 20–22°C 📈 Avg. VPD (lights on): ~1.2 kPa

Blue Cheese F1 automatic Week 6 2/9-15 The Cheese gals are in full flower, the buds are puffing out and stacking. I even see some lower buds connecting to the upper buds and some pistils are turning brown. There is some smell when I open the tent. The F1 genetics are reflected in that these 2 plants are almost identical. I don’t see much difference in their growth so far using the different mediums. Soil and soil/coco blend. Maybe harvest will show a difference in yield from each one. Time will tell. On 2/13 I did major defoliation on my Cheese gals. I removed all large fan leaves and any leaves shading bud sites. Initially, I thought this would be my last defoliation, however I have heard that 1) they continue to grow new leaves until day 20 of flower and 2) there must be enough foliage on the plant to photosynthesize energy. Well, I hope I left enough leaves for energy to keep bulking up the buds. Stretching has slowed down. Both girls grew only an inch and now 17 inches. This is only the end of flower week 2. Controller is set to flower. I add 2 gallons of water to the T700 humidifier daily to keep the VPD in line. 2/9 & 11 4 gal fed 2 liter each nutrients added at ½ of recommended amount. Making 4 gallons since I have 2 pots of carrots and a Dill in the back. Bloom Juice 45ml Plant Juice 75 ml Royal Rush 15 ml Power bud 15ml Green sensation 7.5ml Recharge 2.5ml/gal 4 ml Cal Mag 5 Ppm 333 Ph 7.02 Temp 66 2/13 5 gal Bloom Juice 60ml Plant Juice 60 ml Royal Rush 20 ml Power bud 20ml Green sensation 10ml Recharge 2.5ml/gal 4 ml Cal Mag 25 Ppm 538 Ph 6.6 Temp 66 Your likes and comments are appreciated. Thanks for stopping by. Growers love 💚🌿 💫Natrona💫

Harvest week lemon Cherry Cookies

The buds smell a little like standard weed not so special but that doesn't surprise me as the plant looked in bad shape almost the whole grow. Exited to see some return on the hash, will be making fresh frozen so that should be cool.

Day in and exit fan 15 min off 15 min on Van is full on Night in and exit fan 30 min off 15 min on Van is full on 10 ML Rhizitonic 5 ML Humic 5 ML Cannazym 5 ML Cal Mag 3 Gr Grow @ 5 Liter Day 22 10 ML Rhizitonic 5 ML Humic 5 ML Cannazym 5 ML Cal Mag 3 Gr Grow @ 5 Liter Day 24 22 ML Rhizitonic 22 ML Humic 20 ML Cannazym 11 ML Cal Mag 7 Gr Grow @ 11 Litre Day 26

Lets start.

Шишки набухают на глазах, и это меня радует. С завтрашнего дня исключаю азот, делаю калийно-фосфорный удар, и выходим на финишную прямую. Добавил диоды синего. 06/05 PH6,0 PPM950 👉Планирую сделать интересный досвет низов по периметру, оставайтесь на связи. Спасибо, что заглянули, и будьте здоровы! 🙏 Продолжение следует ...😶