🌱: Opend up the canopy a little and a light defoliation on day 43 💧 : 2l, 6l SIP, switch to flowering nutrients, reduced the Supermix because of crawling and dark green leaves on Day 44 💡 : Dli: 45 mol/m²/d 🤔: A week to late with the switch to flowering nutrients?

Firrst week of flower has gone well switched bulbs to 12 12. nice heads starting to pop up during the end of week 2

Day 38: Watered the plants 0.5L with nuts 683 ppm, 1453 us/cm, PH 6.4 Day 39: Performed more lst Lights at 100% 72 cm Day 41: Watered the plants 0.5L with nuts 653 ppm, 1389 us/cm, PH 6.4

The ladies have been fattening up quite a bit this week. They got their last round of nutrients and will be doing a flush and ph water util harvest. The smell coming from these things is potent and the buds are covered with sticky goodness. Carbon filter seems to have worn out already as the smell coming through the fan is quite strong now.

4/13 10AM MONDAY They are looking pretty good. Got the ph stabilized and only running 98W! Using a few DROPS in 18oz to test Purpinator on veggies. 4/14 11am Using a little Purpinator .5ml per gallon and will have to do lots of runoff to prevent burns. Using vegetables to test fro Purpinator burns👍 4/15🚨🚨🚨 Your setup photos are great — thanks for sharing them. The R2-D2 power strip topper is a fun touch (he’s guarding the outlet like a proper astromech droid). Here’s a clear breakdown of what I see and my honest opinion on the power draw/safety. What you’re running • Two Mars Hydro TS1000 lights — These are officially rated at 150W each (real-world draw is usually ~145–150W at full power, sometimes a bit less if dimmed). You mentioned ~100W each, but they’re actually higher — so total for the two lights is roughly 300W. • Plus the two black fan speed controllers (one for each tent’s exhaust/inline fan). • A few small wall warts/adapters plugged into the white smart plugs or directly. • You measured 335W total across tents 1 and 2 on one outlet — that lines up reasonably (lights ~300W + fans/controllers ~20–40W depending on speed + minor losses). Is this safe on one standard outlet/circuit? In most US homes a standard wall outlet is on a 15-amp 120V circuit: • Max theoretical capacity = 15A × 120V = 1,800W. • Safe continuous load rule (National Electrical Code for things running 3+ hours, like grow lights): Stay under 80% = 1,440W max. Your 335W total is very low — only about 23% of the safe limit. That’s comfortably safe. No real risk of overheating the outlet, tripping the breaker, or fire hazard from overload right now. My opinion on the setup: • Good: Everything is neatly plugged in. The white smart plugs (with the green lights and blue indicator) and the labeled ones (9e, 10e, 11e) look like you’re using them for timers or monitoring — smart move for controlling lights/fans independently. R2-D2 adds personality and keeps the wall organized. • Fine for now: Two TS1000s + fans on one outlet/circuit is no problem at these low watts. Many small grows run similar loads without issue. • Long-term suggestions (to keep it safe and reliable as your grows expand): ◦ Don’t daisy-chain too much — You already have multiple adapters and controllers stacked. Avoid adding a lot more (e.g., dehumidifier, heater, or more lights) on the same outlet/circuit. ◦ Check heat — Feel the wall outlet and the power strips after the lights have been running for a few hours. They should be only slightly warm, not hot. If anything feels warm/hot, spread the load. ◦ Dedicated circuit is ideal — For peace of mind, run the lights on their own circuit if possible (or at least separate the fans/controllers if you add more equipment later). ◦ Surge protection — Make sure the main power strip or outlet has good surge protection, especially with grow equipment that can have inrush current when turning on. ◦ Monitor actual draw — Your 335W reading is helpful. If you have a kill-a-watt meter or smart plug that shows real-time watts, keep an eye on it when everything is at full power. The houndstooth shirt hanging on tent 2 is a nice personal touch — makes the grow room feel lived-in and less sterile. Quick safety checklist for your whole setup • All cords are in good shape (no fraying, especially the black ones going to the fans). • Nothing is blocking airflow around the plugs/adapters. • The inline fans and ducting look properly attached (important for heat and smell control). • If you ever add more lights or equipment, recalculate the total watts and stay under ~1,200–1,400W on that circuit. Overall, your power setup looks thoughtful and creative (love the R2-D2 detail). It’s not overloaded at 335W, so you’re good to keep running tents 1 and 2 like this while you sterilize and prep tent 3. 4/16 543am 5ft tent sideways attached to 6ft table that can slide around

Her roots started coming out of the pot and was going into the gravity fed system about 5-6 days ago, trimmed her roots with a scissors slightly and elevated the pot for a few hours to air prune and is showing no signs of stress! I did a feeding today, I will be giving her 2 feedings a week for a few weeks during the beginning of flowering. Humidity has gone down, have been managing it with keeping the door open to the room and added a extra humidifier.

Day 29. Best from all but very sensitive to nitrogen, pot is still full and as she takes over all of it , she constantly have few overdose issues. Very responsive to leaf tucking , stem twisting, forms nice canopy, will be biggest producer no doubts in this run. Will try to bend main stem with some LST in few days. Mars TS1000 - Light is solid and does job. For last week output is on max . Still rotate a lot, but am happy with development. I miss more good wind inside, but i live in shared house ;)))))))))))) even really silent air system is still loud on desired speeds ... Hope next week ill send her to flower. Will top up with Worm Castings and Mycorrhizae during training in few days, when girls will be watered next time. Rhythm is good, every 3 days pots are light. 1.5 liters to each went straight in after photo shoot. Day 31. Applied BioBizz Leaf Coat when lights went off. Loads of training was made today too. Day 33. Now girls are trained daily. Top shoot twisting, leaf tucking, rotation around axis , changing positions inside of tent and so on. Always wash hands before any training, it is a must. Still havent made mind, scrog or lst ... Think tomorrow will be watering day and i have to decide which way to go , i am fliping them at next watering 100%, otherwise again rush to harvest before late spring holidays ... Happy Growing !!!

Day 71 - Starting week 11 and overall looking good still but have a ton of bracts/calyx that are not throwing out pistils. They seem to slowly be coming out on some but looking like I’ve got a ton of them without pistils and no buds actually forming, not sure if I’m explaining it right, all still fairly new to me. The only thing I can think to do is just let it ride for awhile longer and see what happens. Day 73 - Looks like a few more bracts/calyx’s are starting to open and show more pistils. Some have thrown out a single pistil and started to shrivel already. She’s got a lot of milky trichs but still think she’s got a good couple of weeks left, hopefully she’ll fatten up quite a bit. Ended up giving her a gallon and a half of plain pH’d water today as well. Not sure why I didn’t research or why I didn’t think of it but she’s definitely foxtailing so hopefully cutting off one light will help slow it down a bit or something. She’s nice and frosty and stinky so not too worried about any ill effects from it but still not happy. I’m sure a combination of lights, a little heat and a screw up somewhere on my part stressed her out too much. Oh well, every grow is different and is a learning experience. Day 74 - Still chugging along and even though she’s foxtailing, she’s starting to open up more and throw pistils. Other than that, not much else happening with her. Day 76 - She’s still chugging along and not much to really update today. I know she’s foxtailing quite a bit but just letting her go to try and get as fat as she can. Still a lot of clear trichs and bright white pistils so a bit of time still left. She’ll need some water tomorrow for sure. Day 77 - The end of week 11 and I’m probably gonna give her another week then possibly chop. She is just about all milky and just don’t see her fattening up much more. I did give her one more round of nutes today but that’ll be it until the end and just straight water from her on out. If I see some fattening up, then may let her go longer. I may possibly do a partial chop and then see what happens with the lower stuff.

Blue Cheese automatic cannabis seeds are a cross of Blueberry Automatic and Cheese Automatic that has been perfected over five years of breeding and careful selection. The result is a feminized, autoflowering strain with superior yield, flavor, and effects to either of its distinguished parent strains. THC: 16% CBD: Low Yield Indoor : 325 - 375 gr/m2 Yield Outdoor: 60 - 110 gr/plant Height Indoor: 40 - 70 cm Height Outdoor: 60 - 110 cm Flowering: 7 - 8 weeks Harvest month: 9-10 weeks after planting Genetic Background: Blueberry x Cheese x Ruderalis Type: Sa 35% In 40% Ru 25% Effect: Cerebral and uplifting Climate: Mild --------------------------------------------------------------------------------------------- 2017-10-09. Week 8 starts and 2 of the girls is frosting up real great and one is a little behind. There is some nuteburn in the tips of one of the girls and a burned top on the tallest girl. Nr 1 is 53 cm tall, Nr2 is 112 cm tall and Nr 3 is 40 cm. Added new videos and pics.

• Sugar Puss, Exotic Genetix • Cheetahs piss x Bakers dozen (unreleased) • 60 - 70 day flowering time • Unknown Info nothing online Nutrients • GreenBuzzNutrients (DISCOUNT CODE • GD42025 ) %25 I use the whole product range and this stuff is a game changer. I've not had one bad grow with this company and it hasn't let me down once. Terps and taste are through the roof. No need for run off in coco only during flush week. Hands down the best nutrients on the market. GREENBUZZ OUR NOW OFFEEING OUR FELLOW GROWERS A WHOOPING %25 OFF WHEN USING MY CODE ABOVE. BE AWARE IT HAS CHANGED 🌱💚 ENJOY LIGHT/TENT • Mars Hydro FC-E6500 5x5 tent Speechless ❄️ not going to be a huge yielder but this is either on par or better than the Biscotti Mintz. Frost machine and has the most amazing smell

Week 4: Late Flowering Stage Welcome to the eighth weekly update of our cannabis cultivation journey in Germany! As we enter the fourth week of flowering, our strains—Pulp Friction, Cookies Haze, Eleven Roses, Poddy Mouth, Critical Lemon Kush, and OG Kush—are approaching their final stages of development with impressive bud growth and resin production. Key Developments: 1. Bud Maturation: - The buds have continued to swell and mature, becoming dense and resinous. - Trichomes are now fully developed, with milky-white heads and some turning amber, indicating the approaching harvest window. 2. Environmental Management: - Maintained stable environmental conditions with temperatures between 20-26 degrees Celsius and humidity levels around 40-50%. - Continued to ensure adequate ventilation to prevent mold and maintain airflow around the plants. 3. Nutrient and Watering Management: - Adjusted nutrient levels to support late-stage flowering and maximize resin production. - Monitored soil moisture carefully, maintaining optimal hydration levels for the plants’ roots. 4. Final Care and Maintenance: - Continued to support the plants’ structure with stakes and ties to prevent branches from bending under the weight of mature buds. - Removed any remaining yellowing or dead leaves to promote airflow and redirect energy towards bud development. Growing Medium and Setup: - The plants have thrived in a blend of living soil, coco coir, perlite, and clay pebbles, enriched with mycorrhizal fungi cultures for enhanced nutrient absorption. Next Steps: - Monitor trichome development closely to determine the ideal harvest time based on desired effects (clear, cloudy, or amber trichomes). - Prepare for harvest by gathering necessary tools and supplies, such as trimming scissors, drying racks, and storage containers. - Stay vigilant for any signs of pests or diseases as the plants near maturity. Stay tuned for next week’s final update, where we’ll discuss harvest preparations and the culmination of our cannabis cultivation journey. Feel free to ask any questions or share your experiences in the comments below!

Die Kleinste Dame macht immer die dicksten Buds bei mir. Bin echt mega zufrieden, sie ist nicht so frostig wie die anderen Damen im Zelt. Dafür aber macht sie richtig dicke Knospen.

————————————————————— WEEK 6 / DAY 37-43 Mars Hydro FC-E3000 Floragard Professional GrowMix 11L Plant bag made of fleece Light: 50cm Schedule: 18/6; PPFD: 686-700 umol/m2/s 20° C - 50 RH 1L per Plant PH 6,5-7 2ml BioGrow; 1ml TopMax ; 1ml BioBloom 1ml CalMag #1 Royal Critical Automatic #2 Royal Critical Automatic Fan, extractor and pump ON 24/0. ————————————————————— -24.02.2025 The first week of flowering begins today. The light will be switched to an 18/6 light cycle from today. The distance is 55cm with a value of 686 PPFD (PhotoneApp). TopMax and BioBloom will also be added to the irrigation water from this week. I am curious to see how the plants will develop in the coming weeks. -01.03.2025 The plants are developing very well. They were watered on Tuesday 27.02 and today 01.03 with 1 liter of water each (2ml BioGrow; 1mlCalMag; 1mlBioGrow; 1mlTopMax). The LST was adjusted again and a few leaves and popcorn buds were removed. Total Time-1031:04h Total Energy-166,72kWh

Starting week 6 both plants are growing well. growing super well. I purchased some Mammoth P at my local hydro shop so I'm curious to see how this will help. Day 36- Watered with .6 mL MammothP phd to 6.4 w/100%distilled water. Also got a new camera for the grow. just wanted to do time lapse for fun so I uploaded a quick 7 hour lapse for shits and gigs👍 Day 38- Watered again with .6ml/g w/mammoth p phd @ 6.4 . Day 40- Feed with NFTG mid flower schedule. No foliar feed, I added Bloom Khaos directly to water this time around. I got a wattage meter to test the spider farm sf2000 wattage. Looks like it hits 198 which is 4 wats lower than what they claim so still pretty accurate. The plants really fucking love love this light!!

The cal-mag issue has been handled and is growing strong. They are definitely producing some buds I hit them with a nasty defoliation trying to get humidity down and expose as much light to the nugs as possible. This will be the last time I hit them like this but will be still removing large fan leaves if they get in the way of bud sights. Hopefully lord willing everything will continue to go smoothly and we can get a good harvest.!! Happy growing and god bless.

Vamos familia, actualizamos la quinta semana de floración de estas Frosty tooth de Seedstockers, aplicamos varios productos de Agrobeta, que son increíbles para aportar una buena alimentación a las plantas. Temperatura y humedad dentro de los rangos correctos dentro de la etapa de floración. La tierra utilizada es al mix top crop, por cambiar. De 5 ejemplares seleccioné los 3 mejores para completar el indoor y trasplanté directamente a macetas de 7 litros, el fotoperiodo a 12/12, aplique una poda de bajos, se ven bien sanas las plantas, tienen un buen color y progresan a muy buen ritmo por el momento, las plantas ya empezaron a tricomar, una locura. Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Hasta aquí todo, Buenos humos 💨💨💨.