12/30 - Transplant will be completed by the end of the day - still running high humidity and high temps - Increased Myco/Silica/Nitro feeds - Heavy LST coming week . 😎😎😎😎😎😎😎😎 01/01 - First update of the year - if you are reading this, peace and prosperity to you and yours - Did not get a chance to transplant just yet, looking to transplant by the end of the week - So far this mother has been rocking out just fine - looking to pluck clones by mid Jan - Had a little PH burn on the tips - flushed for PH balance correction.

Well Everyone!! Here we are! 😁 Nearly at the end of the Eternity Grow Cup journey! 🙌🔥👽🙌🔥 Just want to first say a massive Thankyou to Zamnesia & Plagron for letting me compete in this contest. Would not be here without you! absolute legends😎 I had an absolute blast making the videos every week and showcasing the Grow Huge Thankyouuu to everyone who liked, followed and commented on the diary! I have been hooked for weeks on this! and its thanks to all you. I have Harvested 2 of the Runtz first which were darked out for 3 days in a 3x3. We have 3 more in flower for another week or 2 as they are little behind schedule! There are 2 plants which I will be flushing next week as they have really packed out now. We got 1 straggler but looks like she's fattening up good! and will follow suit very soon! 😎 🌳Plant 1 Harvested and Drying now The size of this momma Runtz is mad! After loosing one of the main stems in early flower, she powered through and made 2 massive fat colas! Hardly ran into any problems with this plant other than loosing a main stem which turned out to be glorious in the end! 💥 She is now drying in the 3x3. I'm aiming for 10 days drying. Smell is absolutely unreal! I would normally do longer but as I have took most of the main fan leaves off I think it will be a bit quicker this harvest. 🌳Plant 2 Harvested and Drying now - Another whopper! super sticky colas all over it! I decided to leave a few more fan leaves on this one for now but may take more this week aiming for 10 days again! couldn't' be happier with the results, Hardly ran into any nutrient problems throughout. We had a few pale leaves early flower due to overwatering but she soon recovered and powered through! Smells like victory! 3 more Plants to go not long now!!!! I Will add another flowering week in next 2 days and show the other 3 still in action! Going to Update this harvest page in the next 2 weeks with dry weigh results and Smoke review to follow!! Update 25/05/25 3 remaining Plants 🌳🌳🌳 have now been harvested and curing in the grove bags. there are 2 plants that have a very minty fresh smell, smells well good when u open the bags! hits your nostrils hard! FINAL WEIGH 10.89 Ounce from 5 plants! - Jackpot! 🥇🥇🥇🥇🥇 💥💥💥💥💥 Well that's it! its been emotional! All 5 harvested 😎 this is the ennnnnnnd! my only friennddd! Good luck to everyone in the contest! 👍 Peace Out! Gram_Solo 👽

Already week 7, and it’s starting with much better air humidity which makes it easier for me to stay in the recommended VPD range – currently 54% at 25 °C at canopy height. With 58, 67, 78 and 80 cm plants’ average height is about 71 cm. Odour has increased, and sometimes, but only shortly, I get the feeling the coal before the blowers cannot eliminate all of it. While the smell was a bit strange sometimes one and a half week ago, it’s now absolutely yummy, sweet and promising. As is all the sticky stuff adhering to my folding rule when I measure their size. I am a bit confused about the amount of yellowing leaves. That would indicate a nutrition deficit. On the other hand, last feeding (yesterday it was only calmagged water) brought some brown edges to their tips as I wrote. Which could indicate a slight over-nutrition. I am not *that* worried as leaves around the buds all look great (except for mentioned, but not youngest tips), and mature plants obviously tend to concentrate on bud production solely. But week 7 is quite early, or isn’t it? Any recommendations? Maybe I should go with organic fertiliser next time to avoid being stuck between two options ;) As they had run dry already, I gave each one another round of drink. Slightly less fertilised than last week. And I removed the lowest yellow branches and tiny buds that would not make it into the light in time. The Pineapples must have some mimosa genes crossed in. Each time I touch them they bow away their heads in deep dislike. The taller one looks like her head would be too heavy now … It is not, and usually they recover after an hour or so. The Sherbets are pretty unimpressed by all I do. Meanwhile I’ve been working on the Raspberry Pi BoxControl that should help me stay in better VPD ranges in the future. I am not sure how to translate this all into a more stable solution than based on a breadboard, but the state so far (and how it is supposed to work): Raspi runs headless with control software on autostart. Every minute temperature and humidity are received from a GY-21 I2C chip that should be hanging around plant tops. Data is saved in a database, VPD is calculated and signalled in form of a RGB LED color. Additionally, LCD display rotates through current stats. 3 relay modules can en- or disable misting, dehydration or an additional blower. Maybe I can add a CO2 sensor just for the fun of it (but I’d have to develop a device protocol myself), maybe even one or two soil moisture sensors. Theoretically you could also have a lighting control, but then, GPIO ports are all used. The display needs a lot of them, and while I can log onto the Raspi on my local network and view its desktop, I’d prefer to have a quick overview at place. I am not really informed about current models. Are some GPIO extensions or Raspis with extended GPIOs on the market? But so far, that’s all theory. I never had a PCB developed for my hobbyist projects, I am not the best with a solder station. Never had a Raspi run 24/7 for a really long time. Did a bit more lollipop ping in the evening. Especially tallest Shepard had fun building some more very low buds and branches. I think it can investigate its powers better on different places. Day 51: It’s getting hard to measure soil humidity with my low tech device. Soil must be full with roots and I don’t want to hurt them much. I can see them at the outlets of their pots too, sometimes a bit dry of course as these parts run dry earliest. Experiments to include the CO2 sensor in my test setup failed. I can read and reset it, but setting measurement mode and reading values don’t work. Maybe because my I2C library cannot use ClockStretchLimit. Running out of GPIO ports anyway and seeing that the soil sensors are analogue devices, I’ll probably revive my Uno too and have discovered some clever Raspi heads that should make a more stable setup (and some cooling) possible while also adding a handful of PWM ports and an integrated display. I’d like to include a camera module too and it would be great to have some ports available. A final setup would obviously include a Raspi 4 or 5 to easily enable secure online access. But so far, all working nicely in test setup. Day 54: Sometimes I wonder if they’re still growing at all, but then it’s good to have the daily pictures to compare bud width which now seems to be the main interest of the ladies, although differences are now clearer to tell between two day intervals. The taller ones look like they are one week ahead of the smaller plants, with even higher fan leaves turning pale now. Which at an estimated seed–harvest time of 8–11 weeks for both strains should be pretty common, I guess. Or am I wrong? Summerly temperatures make the temperatures at canopy level sometimes reach 31 °C, but at least the simple ultrasonic diffusers arrived and I am getting closer to a better environment control. I can at least switch the diffuser inside the tent remotely from my phone, and a deep bowl of water with a lid so the "fountain" produced will not wet the tent floor and one of the fans placed at the bottom now to lift its mist upwards seems to do the trick. Humidity increases while temperature drops, getting the plants into a better VPD level, so all I have to do is wait for the evil A to deliver the necessary Raspi components to have this automated, maybe still while this grow runs. At the end of this week, there was just a bit of height gain for the two smaller ladies who now approach their next 10 cm mark. Overall, I get the feeling it won’t be that long until harvest. Maybe with the taller ones a week earlier than the others. There’s really not that much bud growth anymore, rather refinements – like buds getting more nodes and color. I’ll investigate the trichomes every few days but would welcome your estimation.

Looking like 3 more weeks until harvest. I’m going to start flushing in about 10-12 days

Ladies and Gentle stoners I present to you, my best tree, when it comes to presentation, when it comes to bud size, plant size and scent, she was my tallest but she slow down when she started flowering, now that she is showing signs of reveg, I thing she wants to add more flavour and hopefully potency. Though she has skinny brunches surprisingly the can support the weight of the bud, though I suspect it is due to, her been in a green house, so the airflow is plant friendly 24/7 unlike outdoor, the wind is unpredictable would of made life impossible for her in her current state, but if she was an outdoor girl she would of had thicker bulkier brunches.

1 down 1 To go 497g wet ;)))))

Trichome Takeover! ❄️🍰 : The Cake is Frosting Up! Welcome to Week 8! This Wedding Cake Auto is really living up to her name now. The "stretch" from the previous weeks has finally settled, and she is focusing all her energy on stacking those buds. The frost is becoming much more apparent trichomes are starting to crawl onto the sugar leaves, and the scent is getting deeper and more doughy every time I open the tent. I’m really impressed with how she handled the topping and LST earlier on; the canopy is nice and even, and every bud site is getting a prime spot under the Agyrochy LED. Feeding & Environment: Watering: She’s getting thirsty! I’ve maintained a steady watering schedule, making sure to keep the pH around 5.5-6.0 as she bulks up. Nutrients: Continuing with the mix. She seems to be loving the current PPM levels (around 800), so I’m sticking to the plan without pushing too hard. Zamnesia really knocked it out of the park with these genetics. Low effort, high reward so far! Can't wait to see how much more she swells in the coming days.

Jack Herer auto is growing, and doing her thing. She is sifting into flowering, more and more. She should start stretching a lot very soon. Not much else to report. Thank you ILGM. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g

09/26/2021 Starting week #7 of flower still picking caterpillar, and eggs of leaves, not to serious as we are on top of it. Starting the week with banana peel tea drench 2 gallons per girl, which is all she will get besides water till harvest. Still small flushes of pistils coming out I believe she (Hulk) is in final stage of flower (4) lots of orange hairs (pistils) but fresh one coming out daily albeit slower. Hopefully she fatting up in coming weeks. 09/28/2021 Week7 Day #3 Definitely seeing more calyx swelling. #1 is chunking up nicely #2 looks good little bud rot were caused from cattipillar poop! #3 coming from behind Will be last to harvest for sure.

This week is all about the buds gaining weight, and hopefully starting to join together to form big long colars but we’ll have to wait and see due to the slow start to flower.

Entwickeln sich sehr gut weiter, bis jetzt ähneln sich die Damen in ihrem aussehen nur kaum, indica, hybrid und sativa phänos sind vertreten. 😇

Esta planta estuvo dos semanas en etapa de enraizamiento, tres en crecimiento y ocho semanas en floración. No tuvo ningún problema con nada, me resultó de fácil cultivo. En esta cosecha obtuve ciento cuarenta y siete g en total. Utilice una maceta Root House de 10L. El sustracto que utilice fue de Nube Verde, en su composición se incluye turba de categoría, perlita, humus, compost, tierra, dolomita y vermiculita. Sin duda volvería a probar esta genética otra vez, supero mis expectativas.

Really light hairs. Smells really sweet with a little kick and a great way of double toping

Se sueltan amarras de LST y se deja de tejer en la malla. Ramas presentan crecimiento del 100% durante la semana. Se sube un par de cms la malla. Defoliación selectiva en día 14. Riego por medio con fertilizantes. Riegos abundantes solo con agua. Pistilos comienzan a ser más notorios. Leve olor. Poda de bajos en una semana más. Ventilador en mínimo durante la noche. Al máximo durante el día.

I had to kill one of my photoperiod plants because it was hermie so I decided to move the FBTO1 and FBTO13 into the room with them since I had space in there. So now they are on 12 hour light and they seem to be much happier with the environment. This will be my first time flowering autos on 12 hours so curious to see how they do. Nutrients per gallon .5 tsp maxigro .25 tsp armor si .25 tsp calimagic .1 tsp 90/10 humic/fulvic acid

This is the end for this girl, another few days based on trichome then complete darkness for 48 hrs. Such a beauty to grow. Last uploaded file is a video of her sitting in the dark, really shows how her dark coated buds. Cheers and Happy Smokes 💨 💨

pbk has started a little stretch shes started to grow well will be keeping her on calmag and silicon for the next week or 2 untill can see signs of flowers appearing stripped some of her nodes and didn't effect her sshes getting 2l every 2days and is starting to ask for more nothing else to report thanks for reading happy growing guys