Likes
9
Share
@Djuff
Follow
Week 3 Flower: I started with 10ml/500ml of BioTabs Bud Booster once a week. I put another Trellis on top and continued to bend the stems. Some Buds starting to form :). It doesnt smell yet, only if u touch it. Then its quite sticky and stinky (in a good way). Still stretching a bit, but it didnt stretch as much as i thought it would (and as people told me). Week 3 Day 4: Very moist weather outside, the tent is in the sleeping room, average humidity inside the tent is 58% atm. A bit too high. Outside tent ~70% - way too high, hope its getting dryer soon. Week 3 Day 5: Conditions normalizing. average humidity now around 45%. Week 3 Day 6: Im wondering how low I should start cutting the smaller, lower Popcornbuds, any ideas? - Removed some Popcorn buds/leaves from the lower parts of the plant.
Likes
2
Share
@fabialien
Follow
Lunes 26 de Agosto 2024, segunda semana de vida de estas preciosas, siguen en giffy, próximamente trasplantar a macetita de cartón, iremos a Walmart a comprar sustratito para ese trasplante.
Processing
Likes
38
Share
I noticed yellowing of the lower leaves a few days back and was kind of confused because in the past my PPM was fine for "small plants/seedlings". At this size there should have been no problems. What I did not account for was the underground root zone I was growing this time because of the "RAW" beneficial spores and bacteria powder I added. Pleasantly surprised when I transplanted to 3gal pots from the red solo starter cups to see such a packed root zone!!!! I powdered the roots with Advanced Nutrients Tarantula and stuck them into the final home base of ProMix HP mixed with around 25%Perlite for added lightness in 3gallon pots. I prefer a dryer mix and can water more often when needed. Its easy to take care of such a small grow room when it comes to watering/feeding so the light soil works well for me and is a bonus at flushing time. Other than the little yellowing of lower baby leaf, the plants are very stout and study. The main stalks are quite thick for such small plants. I had 6inch fans blowing on them since the 2nd weeks so Im sure that helped. Video added and 2 pics
Likes
21
Share
@Budhunter
Follow
P.punch is going to complete 3 weeks flowering soon and the others 1 week flowering. Happy with thw results so far Feeding them 2.4lt water mixed with fertilizers. Im really liking this line of advanced nutrients ph balanced, ladies are loving it and no signs of any deficiency 👌🏼👊🏼🚀🔥
Likes
31
Share
@MrJones
Follow
MrJones VIPARSPECTRA XS1000 LED 📜 SUMMARY - I have been given the opportunity to run the next generation of LED lights by VIPERSPECTAR, the XS1000! I set up a Stealth Cabnient and moved 3 Cream Manderain Auto XL.s under these lights, the cabinet set up is automated with WIFI light controllers, and INKBIRD Temperature and Humidity Controllers, I am very excited about this opportunity! Specs and Discount Codes Listed Below. 🔹🔹🔹🔹🔹🔹WEEKLY GOALS 🔹🔹🔹🔹🔹🔹 🌞Environment - 80F and 50%Humidity - using Humidfyer as needed. 💧 Feeding - Feeding with FOOP Canna Organic Nutrient Line 🍃Training / Keeping Stems Stable and Strait 🕷️ IPM - Will be using Green Cleaner" 1 OZ per Gallon, and CannControl from Mammoth alternating between product each month for Integrated Pest Management. 💡 Vegetation & Flower (new) Viparspectra XS-1000 Release on March 15th. 🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹 ▶️Monday 03.29.21 / The girls are just stretching like crazy, by far the tellest Autos I have grown thus far, I have the same strain ging in my closet with the same nutrients, but different lights and they not even as close in height. They are loving to FOOP as well. ▶️Tuesday 03.30.21 / Continuing to feed about 30 ounces per day - noticing a bit of yellowing on the leaves and going to look at letting pots dry out a bit. ▶️Wednesday 03.31.21/ Fed about 30 ounces today. ▶️Thursday 04.01.21 / Decided not to feed today, going to let the ladies dry out a bit. ▶️Friday 04.02.21 / Fed about 30 ounces today. ▶️Saturday 04.03.21 / Fed about 30 ounces today. ▶️Sunday 04.04.21 / Fed about 30 ounces today. 🔹🔹VIPARSPECTRA XS1000 LED🔹🔹 Amazon US: XS1000 10% off: in10MrJones http://yx-8.cn/0y-6 XS1500 5% off: in15MrJones http://yx-8.cn/0yA XS2000 5% off: in20MrJones http://yx-8.cn/0y2Y XS4000 5% off: in40MrJones http://yx-8.cn/0y5k Amazon Canada XS1000 10% off it10MrJones https://amzn.to/38udUVe XS1500 5% off: it15MrJones https://amzn.to/3esVUyr XS2000 5% off: it20MrJones https://amzn.to/3l5zAfg XS4000 5% off: it40MrJones https://amzn.to/3l7k5Uj
Likes
125
Share
Hallo liebe Gartenfreunde Trotzdessen, dass wir drei Tage im Urlaub waren und sich niemand anders um sie gekümmert hat, stehen sie noch 😇 Klar sie hatten vergilbte Blätter und auch vertrocknete, hier eher die P.C.K die sich in der Blüte befindet gemeint. Da entsprechende Nährstoffe nicht zur Verfügung standen, wurden die aus den Blättern entnommen. Da es den unteren Bereich bzw. auch ältere Blätter betraf und oder auch welche, die überdeckt haben, hat es zu heute, Tag 24, das vielleicht letzte mal Entlauben, sehr vereinfacht. Wir haben Tag 24 der Blüte gewählt, da wir wissen, dass die P.C.K. länger für die Blütephase benötigt. Sie hat einen hohen Bedarf an CalMag und daher haben wir dieses erhöht auf mind. 1 ml/l. Sie könnte noch ein wenig mehr Schneid vertragen. Nun sind wir aber wieder zu Hause und können noch mal ein Auge mehr Drauf werfen. Ehrlich gesagt ist dieser Lauf in der Blüte hier wirklich nur unser sogenannter ,,Urlaubsgrow,,. Das bedeutet das wir einfach zum größten Teil nach Gefühl und angelehnt ans Schema arbeiten. Wir wollten einfach mal einen nicht so intensiven Grow durchführen. Kraft tanken ist halt auch sehr wichtig und ein tolles Gut. Ansonsten haben wir heute alles entfernt was kein Licht abbekommt. Im Moment fahren wir noch mit 400 Watt. Die Vorblüte ist durch und aktuell geht es in die Bildung der Blütenansätze. Erinnerungen werden beim Ansehen wach. Wirklich toll so etwas mal selbst zu kreiren und betrachten zu können. Hiermit wünschen wir allen eine erfolgreiche Woche. Vielen Dank fürs vorbeischauen. V
Likes
8
Share
This plant was my first harvest of inhouse genetics. Although she produced some seeds at end of life, I couldn't be much happier.
Likes
Comments
Share
I had originally planted 2 purple kush and 2 fucking incredible autoflower seeds by crop king seeds. 1 purple kush never sprouted. So I planted in its place a white widow.
Likes
4
Share
Day one of Early Veg For these Hydroponic systems. . . . The water pump for the aeroponic system was blocked from running. . . We adjusted some materials for the system to work more effectively. . . . Due to the water pump running without a chiller, the water temp was at 33C which is much too high. . . . We set the pump on a timer that will turn on for 15 minutes every hour. . . . We also turned on the AC to cool down the room. . . . Hopefully with all of this, the aeroponic system will be running with little to no problems . .
Likes
14
Share
And here we must bow to the new and undisputed princess of the garden. The Pineapple express thanks to a well-chosen decision that we want to recommend to everyone has become very big and beautiful. In practice, we only made one topping at the beginning, always leave two side branches in the internode below and in the center two fantastic branched main colas have grown and the plant is around one and a half meters a real beast to be an automatic.
Likes
55
Share
Battered & bruised. Give her another week in 14 then next week its 10/14. Nature uses: Mass Flow (Barometric Pumping): This refers to the bulk movement of air through soil pores caused by pressure differences. Fluctuations in barometric pressure (high and low pressure fronts) and wind speed over the surface create these pressure differentials, which can force air in or out of the soil. This is how soil "breathes" so to speak. Barometric pressure fluctuations can cause day-to-day variations in gas emissions by a factor of 20 to 35 times, a dynamic response that highlights its importance in the overall carbon cycle. Indoor growers use: Negative pressure can replicate the effects of barometric pumping by creating pressure differentials that induce air to flow in and CO2 and nitrogen out in a controlled manner. Carbon dioxide is released by microorganisms when they eat sugars, when there is no mass flow in a cycle/system where microorganisms are releasing CO2 from eating sugars, the CO2 accumulates in the medium, leading to several significant effects: cut a long story short, the lack of mass flow prevents essential gas exchange, causing the waste product (CO2) to become a self-inhibiting factor that limits the microbial activity and can eventually kill the organisms. Increasing the amount of carbon in a soil increases its moisture retention, an often-overlooked detail that often ends up around the 4th week of flower, people wondering why hypoxia occurred. Around 40% of all the carbon captured is exuded into the soil to feed microorganisms and converted to chemical energy; CO2 accumulates. This is why it's required if you want to reuse the soil. CO2 is a very stable molecule, sitting at a "bottom of the potential energy well". A significant amount of energy is required to break its strong bonds and convert it into a higher-energy, more useful molecule (like a fuel). Converting CO2 back into fuels requires the same amount of energy released during its original combustion (due to the conservation of energy), which often makes the process energy-intensive and expensive. Therein lies the key, 90% of the air that enters the tent, enters through the rootzones, up and through the underside of plant canopy, air comes in but all the CO2 accumulates in bottom half of the tent due to its density. The exhaust linked to rh keeps a constant negative pressure that links to the rate of cellular respiration performed at night. Come morning the compensation point is upwards of 1500pmm by morning. 300 dollar grow light on its 15th grow. The real star of the show is the 14000btu Portable ac unit.
Likes
9
Share
I think I overwatered and i messed up the PH I NEED TO WATER TO RUN OFF AND FIND OUT WHAT IS GOING ON. SO CLOSE NO NEED TO FUCJ IT UP NOW any way let me know what you think it is in the comments. I AM UP FOR SUGGESTIONS.
Likes
44
Share
Waiting on a full plant hang dry so will wait at least two weeks maybe three hope ma vegging station holds up n can dae tge damage the now as av said guys this is definitely not the perfect set up am not on good terms with land lord so basically squatting here lol and growing and a got caught with one in this house the land lord doesn’t even know lol 😂
Likes
2
Share
@valiotoro
Follow
Hello everyone 👋 She grew fast and with a beautiful green colour on the leaves! She has responded superbly to low stress training and topping & i defoliated her aswell and seems didn't even notice 😎 Wish you all a good day and happy growing 😁
Likes
10
Share
Started this week of with more lst gonna add scrog net this week
Likes
60
Share
@Natrona
Follow
FBA2502 Week 4 April 20-26 Veg 4 Highlights of this week: I defoliated the large fan leaves from the main stems. After defoliating, I saw that plant #3 has a short, tight node structure like plant #1, so I pinned her down before she goes into flowering. Plants 2, 4, 5, and 6 are taller than plants 1 and 3. The larger plants 2, 4, 5, 6 show pre flowers with thinner new growth and hairs at the nodes. The leaves are wide and thick. Some have a slight blue tinge. This makes me think I’m over feeding. Apparently, the blended soil has enough nutrients for the autos, so I don’t need to feed right now. At the end of the week, I watered with ph 6.5 water with cal mag and recharge. Lights are 20” from tops of tall plants and 30 from 1& 3. My general thought for the future grows is to wait until the plant is bigger and see its structure before starting training. #1 has many branches coming into the middle. By beginning with pinning and keeping it at the ground, she will not achieve the stretch around the pot. I pinned #3 to push out the bud sites from being up against the main stem. It is easier to LST when there is more space between the nodes, so a bit of growth or stretch is required. Training to open the top is needed when the plant is short and tight. If you want to follow what's happening with my other two FBA2502s see my friend's @Susquihanna diary. 4/20 Hairs on 2, 4, 5, 6 and feeding Micro ½ tsp/gal Gro ½ tsp/gal Bloom ½ tsp/gal CalMag 1 tsp/gal at full strength 4/21 pics & video 4/22 water only ph6.5. I watered with plain water, it looks like over feeding and they are in are transitioning to flower. 4/24 Water with recharge ½ tsp/g & CalMag 1 tsp/g ph 6.5 pics & vid see blue tinges in leaves. Plants shot up, doubling in height again this week. #1 6”, # 2 10”, #3 7”, 1 14 “ 5 14” 6 13” Your likes and comments are appreciated. Thanks for stopping by. Growers love 💚🌿 💫Natrona💫