Likes
Comments
Share
💩Holy Crap Growmies , we are outdoors and in the Ground💩 👉It's been another full week and she's doing great , very nice Growth, considering shes been up against the wind and rain 👈 No problems 😊 so far so good 👍 She's in her preflower faze and shes leading the pack so cool 👈 I GOT MULTIPLE DIARIES ON THE GO 😱 please check them out 😎 👉THANKS FOR TAKING THE TIME TO GO OVER MY DIARIES 👈 👉NutriNPK NUTRIENTS USED FOR FEEDING 👈rain water to be used entire growth👈 👉www.nutrinpk.com right now get 10% off using SPRING2022 as the coupon code👈
Likes
38
Share
@Oyziphar
Follow
DAY49 7 Weeks Buds are hard. Smell is extreme. Very limited amount of spidermites under some leaves. No reason to exterminate them, because next week I'll probably harvest the plants. The smell of the Triple G is fanastic, Big separated buds. The Cookies Gelato are more sativa style of buds than I'm use of them. There leaves are turning purple. The Liberty Haze has a lot of small leaves in the buds, and thet got amasing blinking white flowers. Probably this will be the plants I'll harvest the last, because they need some extra flowering time. The Wedding Gelato is creamy, lots of trichomes and is fast flowering. But some flowers got budrot. I'ts hard to get the humidity low because of the rainy and misty autumn outside.
Likes
26
Share
What a blast! It was so fun to do all this for the first time and have more appreciation for flower. The plant was hung intact upside down to dry in 60F / 57RH conditions for 13 days - it resulted slightly on the dry side. I plan on curing for 30 days, adding a bóveda pack soon after 1 week in jars. The once overwhelming tropical smells are now much more subtle when compared to the diesel/gas smell the flower has now. Overall it’s very loud! This was super easy to grow and tolerated many classic noobie mistakes I made like sudden droughts, inconsistent lighting intensity and slightly lower than ideal humidity conditions
Likes
3
Share
@CalGonJim
Follow
4/13 10AM MONDAY They are looking pretty good. Got the ph stabilized and only running 98W! Using a few DROPS in 18oz to test Purpinator on veggies. 4/14 11am Using a little Purpinator .5ml per gallon and will have to do lots of runoff to prevent burns. Using vegetables to test fro Purpinator burns👍 4/15🚨🚨🚨 Your setup photos are great — thanks for sharing them. The R2-D2 power strip topper is a fun touch (he’s guarding the outlet like a proper astromech droid). Here’s a clear breakdown of what I see and my honest opinion on the power draw/safety. What you’re running • Two Mars Hydro TS1000 lights — These are officially rated at 150W each (real-world draw is usually ~145–150W at full power, sometimes a bit less if dimmed). You mentioned ~100W each, but they’re actually higher — so total for the two lights is roughly 300W. • Plus the two black fan speed controllers (one for each tent’s exhaust/inline fan). • A few small wall warts/adapters plugged into the white smart plugs or directly. • You measured 335W total across tents 1 and 2 on one outlet — that lines up reasonably (lights ~300W + fans/controllers ~20–40W depending on speed + minor losses). Is this safe on one standard outlet/circuit? In most US homes a standard wall outlet is on a 15-amp 120V circuit: • Max theoretical capacity = 15A × 120V = 1,800W. • Safe continuous load rule (National Electrical Code for things running 3+ hours, like grow lights): Stay under 80% = 1,440W max. Your 335W total is very low — only about 23% of the safe limit. That’s comfortably safe. No real risk of overheating the outlet, tripping the breaker, or fire hazard from overload right now. My opinion on the setup: • Good: Everything is neatly plugged in. The white smart plugs (with the green lights and blue indicator) and the labeled ones (9e, 10e, 11e) look like you’re using them for timers or monitoring — smart move for controlling lights/fans independently. R2-D2 adds personality and keeps the wall organized. • Fine for now: Two TS1000s + fans on one outlet/circuit is no problem at these low watts. Many small grows run similar loads without issue. • Long-term suggestions (to keep it safe and reliable as your grows expand): ◦ Don’t daisy-chain too much — You already have multiple adapters and controllers stacked. Avoid adding a lot more (e.g., dehumidifier, heater, or more lights) on the same outlet/circuit. ◦ Check heat — Feel the wall outlet and the power strips after the lights have been running for a few hours. They should be only slightly warm, not hot. If anything feels warm/hot, spread the load. ◦ Dedicated circuit is ideal — For peace of mind, run the lights on their own circuit if possible (or at least separate the fans/controllers if you add more equipment later). ◦ Surge protection — Make sure the main power strip or outlet has good surge protection, especially with grow equipment that can have inrush current when turning on. ◦ Monitor actual draw — Your 335W reading is helpful. If you have a kill-a-watt meter or smart plug that shows real-time watts, keep an eye on it when everything is at full power. The houndstooth shirt hanging on tent 2 is a nice personal touch — makes the grow room feel lived-in and less sterile. Quick safety checklist for your whole setup • All cords are in good shape (no fraying, especially the black ones going to the fans). • Nothing is blocking airflow around the plugs/adapters. • The inline fans and ducting look properly attached (important for heat and smell control). • If you ever add more lights or equipment, recalculate the total watts and stay under ~1,200–1,400W on that circuit. Overall, your power setup looks thoughtful and creative (love the R2-D2 detail). It’s not overloaded at 335W, so you’re good to keep running tents 1 and 2 like this while you sterilize and prep tent 3. 4/16 543am 5ft tent sideways attached to 6ft table that can slide around
Likes
22
Share
16 days of slow drying each plant with the environment controlled inside the tent with 2 meters. I have two fans on, pointing at the floor to circulate the air temps - 20 - 23 º humid - 50- 60 %
Likes
11
Share
@BLAZED
Follow
Week 7 (10-3 to 16-3) 10-3 Temps: 17.5 to 21.8 degrees Humidity: 57% to 70% 11-3 Temps: 18 to 21.8 degrees Humidity: 61% to 65% Watering #2: 500 ml. 12-3 Temps: 17.5 to 21.7 degrees Humidity: 57% to 66% The individual ScrOG project is done! I attached the screens to the pots. Did some defoliation and LST to the plants to make it fit. Set the light to 40% strength with a distance of 60 cm. I didnt think about the poles of the tent, so its not fitting perfectly, but i will fix that tomorrow! 13-3 Temps: 17.6 to 21.2 degrees Humidity: 56% to 64% Watering: Both 1000 ml. The screens fit perfectly now, i am very happy with the end result!! 14-3 Temps: 17.2 to 21.1 degrees Humidity: 58% to 69% Watering #1: 330 ml. (Only Calcium added) 15-3 Temps: 17.2 to 21.5 degrees Humidity: 60% to 71% Watering: Both 1000 ml. Set the light from 40% to 45% strength. 16-3 Temps: 17.5 to 21.6 degrees Humidity: 64% to 70% Progress of 2 Damn Sour's in the same tent: https://growdiaries.com/diaries/254333-green-house-seed-co-damn-sour-grow-journal-by-blazed
Likes
4
Share
Likes
7
Share
@S3phwea
Follow
Plant therapy had been amazing. Winter is my hardest time of the year. I actually usually use a supplementary light during the winter to help with my mood and I wonder if being around the LEDs has any similar positive effects. I know the nuturing and process of growing has been a great practice of patience and almost meditative for me. Plants are friends. I believe the plants are well. I have a microscope to keep my eyes on trichomes maturity. I hope they all end around the same time. I would like to chop/dry them together in the tent. Thanks for everyone who has come on this journey with me so far.
Likes
120
Share
First and foremost, I want to express my gratitude to Dutch Passion for trusting me with the honor and pleasure of growing their Tropical Tangie. It's an incredible strain, and I can't wait to see what she brings to the table. So, shout out to @DutchPassion_Official and the Grow diaries Platform for making this journey possible! Now, let's talk about the germination process. I followed the typical seed germination method, placing the seed in water. And you won't believe it, within about 30 hours, she sprouted her tiny little taproot. It was like a magical moment, witnessing the start of a new life. After careful consideration, I decided it was time to move her into a small pot filled with Aptus Holland Mycor Mix. This is a special blend that contains beneficial mycorrhizal fungi, which form a symbiotic relationship with the plant roots, enhancing nutrient uptake and overall plant health. It's like giving my Tropical Tangie a team of underground helpers, ready to support her growth. But that's not all! To give her an extra boost, I added Aptus Holland Water Regulator, which helps optimize water absorption and distribution within the plant. And to kickstart her growth, I used the Micordrip from Aptus Holland as well, which provides essential microelements to support healthy development. It's like giving her a tailor-made nutrient cocktail for success. Now, let's talk about the plant guardians, the Ninja Legos! These little guys may seem like toys, but they are the unsung heroes of my garden. Not only do they bring a touch of whimsy and fun, but they are also masters at keeping bugs and bad energies away. They're like the silent protectors of my precious plants, ensuring a safe and harmonious growing environment. Plus, who doesn't love a good joke about Ninja Legos? So, my friends, here we are embarking on the Ninja Lego Tropical Run with Dutch Passion. It's a journey filled with love, passion, and the support of Aptus Holland as my sponsor. Together, we're creating something special. Stay tuned for more updates as we witness the growth and development of the magnificent Tropical Tangie. Thank you, Aptus Holland, for your support, and a big shout out to Dutch Passion for making dreams come true. Let the adventure begin! As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and blessed with you all in my life<3 <3 <3 #aptus #aptusplanttech #aptusgang #aptusfamily #aptustrueplantscience #inbalancewithnature #trueplantscience #dutchpassion #dogdoctorofficial #legoninjago #growerslove 
 With true love comes happiness <3 <3 <3 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so <3 <3 <3 Friendly reminder all you see here is pure research and for educational purposes only <3 <3 <3 Growers Love To you All <3 <3 <3
Likes
9
Share
These our great and quite uniform genetics! Lemonpaya get the beans
Likes
2
Share
@youdan
Follow
Non ci sono parole, la ciliegia og è sempre piu marcata ed io sono veramnete felice per questo cilo, e alta 1.70 e di tutte cime impilate della stessa grandezza da giu a sù
Likes
129
Share
Hi Growers! And that’s a wrap! It was a great grow and I really enjoyed the whole journey. A big thank you to everyone who followed the diary, supported me, left comments and shared their experience. See you in the next diaries. I’m already looking forward to it! ------------------------------------------------------------------------------------------------------------------------------------------------ A je tu konec! Byl to skvělý grow a celou cestu jsem si opravdu užil. Velké díky všem, kteří můj deník sledovali, podporovali mě, psali komentáře a sdíleli své zkušenosti. Uvidíme se u dalších deníků. Už se těším! Peace and happy growing! ✌️
Likes
16
Share
@RakonGrow
Follow
Tag 78 : + 2L Flaschenwasser ++ Dünger mit wenig CalMag + final PH 6.05 Ein Bild zum Vergleich Tag 66 und Tag 78 hinzugefühgt. Tag 79: Trichome an den äusseren buds aufgenommen . Das dauert noch bis zur Ernte. Video hinzugefügt. Tag 80 : + 2L Flaschenwasser (EC 0.325) (16:00 Uhr) ++ CalMag (final EC 0.456) ++ Dünger für Blüte + final PH 5.98 Tag 82: + 2L Flaschenwasser (EC 0.325) (13:00 Uhr) ++ CalMag (final EC 0.435) ++ Dünger für Blüte (PH 4.95) + final PH 6.10 (mit GreenHouse Feeding BioEnhancer als PH+ ) / EC 1.350 Tag 83: Ein paar Bilder und ein Video. Die Dame hat jetzt das ganze Zelt für sich alleine und bekommt die satten 200Watt für sich . Heute hatte ich so geringe Luftfeuchtigkeit das ich ein nasses Handtuch vor den Luftansaugbereich stellen musste. Tag 84: + 2L Flaschenwasser (EC 0.325) (10:00 Uhr) ++ CalMag (final EC 0.435) ++ Dünger für Blüte (Generative Phase III der Canna Dünger Tabelle) (PH 6.20) + final PH 6.0 (Plagron PH- (Phosphor basiert) )
Processing
Likes
20
Share
@Hawkbo
Follow
Couple got a little burn I think maybe a little too much soil in there with the coco on top of the light feed? I got all the final pots filled up today they will go in 3 gal bags either today or tmm. It's a Greentree pro ultra coco/perlite mixed with some roots organic soil about 70/30.