Likes
Comments
Share
@MG2009
Follow
03/01/2022 You can tell which I put in flower room first, buds developing nicely 🙏🏻 Second one is a week behind but starting to flower have to raise the lights this week.
Likes
4
Share
@leo2023
Follow
Just a few more days to chop🔪✂️
Likes
Comments
Share
Likes
4
Share
War aufjedenfall ein lustiges Experiment haha
Likes
65
Share
@Dendegrow
Follow
Welcome to week six! 🌱 Week five was a complete success – all parameters are perfectly aligned. I’ve increased the water conductivity to a solid 3000 and bumped the CO2 level up to 1200 🌿. Light intensity is now set at 1400 µmol in the center and 1000 at the edges, which will keep the plants strong in their generative state 🌞. I’ll maintain these levels until the end of the third week and then start slowly removing the large fan leaves to ensure the buds get plenty of light 💡✨. I’m also trying something new to activate the “Emerson effect” 🌄: I’m running the deep red lights for 5 minutes before sunset and for another 5 minutes after the day ends. This should give the plants a final boost in photosynthesis, helping to maximize their growth potential! Everything’s looking fantastic so far! The Black Cherry has rooted well across different experimental setups, and at the end of the grow, I’ll provide a full report on the best care techniques for both strains 🌺👌. Willkommen in Woche sechs! 🌱 Die fünfte Woche lief perfekt – alle Parameter stimmen. Ich habe die Leitfähigkeit des Wassers auf satte 3000 erhöht und den CO2-Gehalt auf 1200 angehoben 🌿. Die Lichtstärke beträgt jetzt 1400 µmol in der Mitte und 1000 am Rand, was dafür sorgen wird, dass die Pflanzen stark im generativen Zustand bleiben 🌞. Ich werde diese Werte bis Ende der dritten Woche beibehalten und dann langsam damit beginnen, die großen Sonnensegel zu entfernen, damit die Blüten ordentlich Licht abkriegen 💡✨. Zusätzlich probiere ich etwas Neues aus, um den „Emerson-Effekt“ zu aktivieren 🌄: Ich lasse das tiefrote Licht 5 Minuten vor Sonnenuntergang und 5 Minuten nach dem Ende des Tages weiterlaufen. Das sollte der Photosynthese einen letzten Schub geben und das Wachstum der Pflanzen maximal fördern! Bis jetzt sieht alles fantastisch aus! Die Black Cherry ist in verschiedenen Versuchsreihen gut angewachsen, und am Ende des Grows werde ich einen ausführlichen Bericht darüber abgeben, wie sich die beiden Sorten am besten pflegen lassen 🌺👌.
Likes
17
Share
@Kirsten
Follow
12.5.25: I watered with some more Trace again. She's feeding well and needs watering more often again. I upped the dose of Trace as I've noticed that there are some purple hues coming back on the stems. 13.5.25: I have removed all fabric ties on the plant. I think we have stopped stretching, so the sooner, the better. I keep getting my watering can caught in them all, and it was only a matter of time before I ended up snapping more branches off 😅 The fewer things in my way, the better 🤫 15.5.25: I watered today as the pot had dried out almost. The plant was watered with dechlorinated water PH'd to 6.5 with the following nutrients per 6.5 litres; ♡ 7ml Trace by Ecothrive ♡ 1/2 Tsp Sea K(elp) by Greenleaf nutrients The plants received the amounts below. HULKBERRY: 1l FASTBUDS: 2l NORTHERN LIGHTS: 3.5l I am not giving any further nitrogen at this stage. They had a couple of doses in the past week or so. I'm sure they don't need any more. So, I'm just using the kelp as it's packed full of goodness and high in potassium. I also suspect an excess of phosphorus. So I'm also leaving that out for the time being. There are still some red stems on the plants. added the Ecothrive trace for the last few waterings. I'm hoping it will resolve without any further intervention. 16.5.25: I watered Northern Lights with 3ltrs of dechlorinated water PH'd to 6.4 with: ♡ 1/2 Tsp Sea K(elp) by Greenleaf nutrients ♡ 7ml Trace by Ecothrive Measurements per 6.5ltrs. PPM: 670 PH: 6.4 17.5.25: I watered again today with 2ltrs of the above PH'D to 6.2. Parameters remaining the same. The plant is increasingly thirsty, so the waterings have again needed to be increased. As we're reaching deep into flowering, this is par for the course. I'm mostly using coco, perlite worm castings. Etc. So it's very easy for my pots to dry out. I need to keep on top of it. As the pots dry out, the microbes are lost, and so keeping everything moist and healthy is imperative. That's why I add Ecothrive Biosys regularly to ensure I keep up with the microbial life in the soil biology. To avoid PH lockout. 18.5.25: I watered again, with the same parameters as yesterday. Instead of Sea K, I used Ecothrive Biosys: 1/2 Tsp/6.5l PPM: 550 PH: 6.4 Thanks for checking out my diary and hanging out 💚✌️ 🍃 😊 🌱
Likes
58
Share
@AsNoriu
Follow
Day 97. Fast Buds Thank You !!!! Day 109. Girl is in jars and waiting for Christmas ;))) Happy Growing !
Likes
14
Share
@Terpyboyz
Follow
Alright lads 💪🏻 so we’re starting week 2 today - the girls are all having there own individual issues the joys or running multiple strains again 😂👌🏻, but we’re all looking really wellz so left side is looking a bit N def hungry still so I’ve upped the bio grow to 2ml and the right side is still showing she’s still got some nutes left from repot as shes good I’ve just left that to 1ml bio grow. All the clones are looking nice lush green, all starting to take shape now🕺 wait another 2 weeks until I start to flower them.. and see which of my keepers are as clones then take cutz off them before flowering my actual clones tent, keep the cutz in a separate tent and start popping more seeds of this next round. Either ripper seeds new limited edition or lit seeds can’t decide..😅, anyways gang cheers for stopping by until next week and we can see some bud formation happing 💪🏻 Update - end of week 2 of flowering - I’ve given them all a fair defoliation and taken a lot of lowers of to start focusing it on them tops. Still looking a bit pale lack of N but we should be okay if it seems keep progressing al just up feed to 2ml per litre. Other than that it’s going fairly smooth.
Likes
9
Share
the headbuds of the rainbow triangle were already harvested with the other plants (Forbidden Nectar and Sunset Kush Pop Clone), as one of the thick headbuds had already a little bit budrod We left the rest of the plant for another week. During this week, the lower buds really put on weight again. The head buds are already dried and will be cured. The rest has now been hung up to dry.
Likes
4
Share
@4F1M6
Follow
Buds are really putting on weight! Frost is in abundance. Colas have really gained defined shape and structure. The aroma is getting intense. Full blown bloom is a wonderful thing. Just watching as the sexyness gets more defined. We have hit the major bulking phase. Do to the new phase of growth the feeding has once again changed. I added bud golem to the mix. To get every drip drop of flowering vigor this lady has to push. Really gives that extra umph for the bulking phase. Will eliminate that last bit of grow outta the mix next feed. Than ride that mix to the flush. Until next update . Happy growing and stay lit fam.
Likes
6
Share
@sa2_gr
Follow
Hey guys ! What a blast ! 10 days drying at 55-60% RH and 15-18°c. 45gr/plant. 3 plants, 2 differents phenos 1 pheno is realy Kushy, with specials notes that remind me some sort of GMO terps, with no real notes of permanent marker. The second one definitly have permanent in it, smells realy special, like medical products. Thing smoke realy nice, realy terpy
Likes
8
Share
Good week of growth. Bud sites are starting to come together. Brooke is still really close to light, will see what happens. Bent branches are doing well. 10-2 Buds are starting to look like buds. Got first good photos of forming colas.
Likes
1
Share
Likes
18
Share
@CRK00
Follow
2nd Week Report 24/10/19 - 31/10/19 25/10/19 I didn't flushed, but I filled the reservoir with 3l of 10% strength solution. Added to the current solution the same nutrients quantity as the first week (except for "Root Stimulator" and "Enzymes" that the first week were 20% strength and now got back to 10%). Now the reservoir should be filled with a 20% strength solution 29/10/19 - CMXL is 10cm height and it is growing really well along with his roots. - LSD is 6cm height and it is growing a little slower like his roots, but both of them look healty. I think in some days should start growing fast like CMXL Added 2 low frequency (113kHz) Ultrasonic Piezoelectric Discs: - One for the root chamber that should help with root expansion as it nebulize solution and the fog carries nutriments (like a small aeroponics integration) and will help my attempt of cloning. - One will stand in a 20% solution next to the plants to increase Humidity (and maybe feed them a little). I'll try to set them running 24/7 Switched water pump that sprays Rock Wool from 5sec every 30min to 6sec every 60min. Next week I plan to stop using the pump as "Top Feed" if roots will be well developed and probably I will use it as "Recirculation Pump" to keep nutrients in reservoir mixed better 30/10/19 Roots exposed to air inside reservoir got a little yellow after inserting the small fogger, so I will try to keep it 30/30 seconds ON/OFF. I will check next day if it's helpful to existing root o as root propagator for clone trial Topped CMXL and did a little of LST just by bending the main stem to expose the small growing next to fan leaves. The cutting was immediately dipped in a solution made by honey and Root Stimulation (the same I use for reservoir solution as it should contain rooting hormone), hoping it covers the cut like a gel and don't let the oxigen get in the cut until there will be some new growing. After that I put the cutting on the lid without any pot, as you can see in the picture some tape is covering the hole and it holding the topping. I covered it with a small jar to maintain humidity, hope to see some roots next week ;) I plan to fim LSD tomorrow if tonight grows enough 31/10/19 Filled the reservoir with 6L 20% strength solution and after that added 10% nutriment for 36L directly into the tote (like I did last week). Now nutrient solution inside reservoir should be 30% strength and it's ready for the 3rd week Pinched LSD Top with my fingers and applied LST by bending a little the main stem. Hope this FIMming works and returns better yield ;) Cloning trial didn't worked (I was expecting nothing, just a test), the cut part of the topping is already dry. I knew the topping was too short, next time if I try to clone his stem will be at lest 2cm Last Update 31/10/19 Next Update 03/11/19 with the next week See you guys ;)
Likes
6
Share
i harvested the top part of my grapefruit plant as i checked the trychones and they were 20% amber the lower half had mostly cloudy but no amber ro im going to give it a last feed then flush in about 5 days for 7 days should bd ok then .. Ive raised thr grapefruit off the ground to stop fluids mixing between them as one gonna have a few more feeds where the other is on flush My other plant the bushy banana blaze is foing ok had a good 2-3 weeks i rekkon till i even think about harvest
Likes
5
Share
Ok I'm supposed to be harvest around the 5 I just uploaded a bunch of weeks at once tried to keep it together. Ha
Likes
20
Share
Hard to grow in my case, but the results are worth it. Nice trichome production, on the buds as well as on the sugar leaves. I didn't expect much quality with all the problem she had but she turned out beautifully. 227g total from 1 plant tested at 24% THC and <2% CBD 3.02g of kief from the trim
Likes
9
Share
@Chubbs
Follow
420Fastbuds-FBA2505 I'm excited as it's tester time. Germination week is complete. I planted 3 seeds and had all 3 sprout within 48hrs of being in the soil. I do soak them for 48hrs in a glass of water before planting. I can't wait to see what the weeks to come will have in store. Happy Growing