Day 65, 17th of November 2020: Strong lady! I was angry with me because 2 x managed to break bud sites....🤫🤐 She is so fragile but all good still looks good these one smaller sides so luckily nothing serious damage. Streching stopped or not she my strech a bit more....buds are on the way now haha Some lollipopping (defoliation) has been done and also removed all the old LST's as the plant remains in shape from now. And then after if you look at my pictures she has a crazily twisted main stalk and the plant is like the Leaning Tower of Pisa..... 🤣🤣🤣 So I needed to balance a bit and try to bring back to be normal..... haha Fertilization is still the same like before happens every 2nd day with the ratio and mix above. The lamp is on 11.30 min and off 12.30 min. Last week was 15 min longer light cycle.... So every week 15 min shorter light cycle until the 5th week. So far -30 min. It switches on at 6 am and off at 17.30 pm.

WE ARE SO BACK PEOPLE!! 🎉🎉 Welcome welcome back to my weekly update, we got some good and some bad news this week. Bad news first: I will postpone harvesting due to the trichomes remaining clear which I am pretty frustrated about. BUT good news: we got some new light! I updated to a FC-1500 EVO from MarsHydro which got some insane efficiency compared to my last light. I can hang it 10 cm higher with a better light spread and a PPFD increase of 200 (now staying at around 900 PPFD throughout the tent) and all this while taking 10w less! Truly a technologie of all time! 😂 However I will harvest on Wednesday in the upcoming week, because it allows me to have my desired 10 days of dry-time while also maintaining my schedule with starting the Cup-grow February 1st. I also included some Bud Porn this time around because I felt like messing with DavinciResolve again, nothing too fancy though :) 14.01.: - watered all plants with 1L/plant - increased max. temperature to 26 Celsius - decreased the light to 20 cm height ➡️ all of this to boost the metabolism of the plants for them to produce cannabinoids faster and making my trichomes milkier 16.01.: - changed the lamp to MarsHydro FC-1500 EVO - height at around 30 cm while maintaining the temperature levels 17.01.: - watered all plants with 1L/plant - this is the last watering they will receive

great Grow!

SPEEDY BOOM 💥 AUTO/ KANNABIA WEEK #10 Overall Week #4 Flower This week no issues she's not the biggest plant but she's growing in extremely hot conditions and she's doing fine. This lady is ready to grow she's easy to grow she doesn't need much besides light and water. Stay Growing!! Kannabia.com SPEEDY BOOM 💥 AUTO

2da semana de flora y cambio positivo para las quebradas 😅 Blue Moby ni se enteró del supercroping accidental lo que si quedo con baja estatura que las demás. moby dick se recupero de la arrancada de la.punta principal 💪 viene un poco atrasada en flora en comparación a ww y bm pero viene remontando. Whithe widow viene súper bien y florando con cambios día a día 😍 está semana defolie las 3 por última vez y agregue una segunda malla de scrog para evitar el error anterior de quebrarla queriendola entrenar! Como siempre acepto criticas y concejos gracias y buena semana!! 🤝

Final week of flush will be getting the cgop on saturday

Flow Week 6 successful 🌱 No Words needed 💜

this is almost the end of week 6. Hoping to see some bulking soon. Lower sites are still producing pistils and the top site pistils are starting to curl over.

Week 3 Flower (Bloom Week 3) – Daily Tasks Evening (Lights On) Check environment (temp 24–27°C, RH 55–60%). Inspect leaves and buds for pests, mold, or deficiencies. Water/feed (depending on medium): balanced bloom nutrients with slightly higher P and K. Ensure good airflow (oscillating fans). Adjust plant training (light defoliation if leaves block bud sites). Check for early signs of stretch finishing. Evening (Before Lights Off) Ensure irrigation is not too late in the cycle to avoid wet medium during dark period. 👉 In Week 3 bloom, the plants are finishing their stretch and starting to put more energy into forming bud sites. Main job is: Setting Scrog net 2layers ,Control environment (VPD, airflow) ,Support the plant with bloom nutrients.

I think about the fact that it is no longer necessary to cut leaves. I cut it a lot, but I notice that many people cut a bunch of leaves at one time, although somewhere I read no more than 10% at a time. When I gave fertilizers, I always diluted them with water even more to reduce ppm Day 68: I added cal-mag to the diet because the leaves are really turning yellow from the bottom. 0.5 ml Day 70: I added 1 ml cal-mag

Well unfortunatly due some technical issue on GD's side my pictures and videos arent uploading right so sorry for that. All plants seem to be adjusting fine and i took a cut (when topping) of the top right grape & cream cause she handled everything like a champ so far where the others had some difficulties. We'll see if that holds up come harvest time but maybe a cross between that pheno and a seedsister might be viable. Still just water. I did adjust the blumats to dry up a little more and the plants are taking that for the better. Toprow is 3x grape&cream Middle row 1xMokums Tulip 1xVanilla Frosting 1xLemon OG(own cut) Bottom row Sour Tangie Dawg Stay tuned!

Even though it has only been 4 days since my last update, I want to upload whenever I do more then just water my plant. Something that being said since my last upload I did put more of a bend in the main stalk and defoliated alot of the up higher and down low branches trying to keep it all the same height.

I have decided to harvest a little bit early so spider mites don't come back and the weather is favorable for drying this week. After the chop, I also did bud wash with 3 buckets: 1. 5 gallons of water and a cup of lemon juice and a cup of soda bicarbonate 2. Warm water 3. Coldwater There were tons of nasty stuff left in water. After washing I left them to dry under a fan and shook them off to remove as much water as possible and then put back into the tent to dry with a dehumidifier and outtake on with 2 oscillating fans NOT pointed at the plants. Humidity is currently around 55%. After the first day of drying, I realized I will not be able to control good conditions in my tent for drying so I moved the plant to hang dry in the climatized room for a second day. During the second day, I trimmed buds and removed stems and then put them in brown paper bags to slow down the drying process. After 2 days of drying buds now weigh around 240 g, Humidity spiked to 87% outside on the third day and I had to constantly run A/C and a dehumidifier to keep the room at around 20 C and barely 55-60 % humidity. Grew tired of this so I tried something new from the third day. It's called Lotus curing and drying and works with any frost-free fridge. I put brown paper bags with buds inside the fridge at around 7-12 C and the humidity in the fridge is around 40-50%. I also have temperature and humidity probe in one brown paper bag so I can react if it dries to fast. Humidity is hovering around 70-80% currently and my plan is to manipulate humidity inside the fridge by opening it, adding moisture, or regulate temp so humidity drop as slow as possible. When it hits less than 72% when tested outside the fridge in the room temps I will start normal curing process in jars. After a week of drying in the fridge, jars are in the drawer curing right now. I sample tested one Dynavap bowl and flavor is decent with the sweet scent but it still needs a bit more time to be perfect. High was the same as my first Sweet tooth grow, the main thing I felt after finishing Dynavap bowl was calm and relaxed with time slowing down.

Lemon cherry gelato is a good little plant., I like the structure. It has been in the large pots for a significant less amount of time that the others and it is already about the same size so it’s fast growing plant. It’s from Barney’s and everything from them has been amazing so I have high hopes

Breeder Suggested Harvest Window opens tomorrow at day 65 and continues on for 15 days to Dec 15. +Will start the flush process on the 5th of December + 1ST video on Growdiaries. Planned on flushing on the 5th Watered 2.5 gallons. Life scheduled events and had to cut it short a few days and harvest day -NO MATTER WHAT - would have to be the 10th. putting us at Day 75 of flower Flushed with 17.5 gallons Considering water was filtering through soil, it drained ABSOLUTELY clear by the last emtpying of the container I was using to catch Buds are fattening up very nicely. Smells of Lemon/Citrus/Sour ----------------------------------------------------------------- nowayReggie

Start of flushing for the blueberries, both blueberry plants have very heavy, sticky, stank buds, I'm looking forward to harvesting these beauties! Start of the last week of nutes for the super lemon haze, she has packed in the weight, buds have filled out nicely and stickier than the blueberries. She's still hungrier than the Blueberries, taking an extra 2 liters of feed each week. If the trichomes are showing cloudiness by day 5 of this week, I'll flush her early.

and every day we come closer to harvest hmmm time is torture now. best grow i ever done nutrients controlled only once in week plant very vorgiving all my mistakes. awesome. i bend the side down and well im breake it so i hope he will survive and i call it planed HST.

I'm so excited! This week she entered flowering! Almost doubled her height! Grew 22cm this week! I have transplanted her into a 10 Litre fabric pot. I've never used these before, but they look promising. Different to airpots. I'd say more extreme tbh. Oxygen to the root zone is never a bad thing 😎

📋Summary of previous week Previous week, the plants grew steadily under a 21-hour light schedule, with the lamp at 80cm and dimming adjusted from 55% to 60%. The average temperature was 20.5°C and humidity 72%. Watering included 300ml per plant with Bio Rhizotonic on 21/02, a light misting on 23/02, and 1L of bottom watering on 24/02, and another 300ml of plain water on 26/02. Overall, a smooth week with good development! 📈 🌱Heights at the beginning and at the end of the previous week: -#R01: 15cm - 19,5cm = +4,5cm -#R02: 10cm - 12cm = +2cm -#R03: 7cm - 10,5cm = +3,5cm (#R03 Backup Seed, 5Days Behind) ---------------------------------------------------------------------- 3️⃣Week Vegetation: 28/02 - 07/03 💡 Light schedule: 21 hours (06h30-03h30) 📏 Lamp To Plant Distance: 80cm ⚡ Dimming: 65% 🌡️ Average temperature: 20,5° ☔ Average humidity: 72% 🌱Height: - #R01: 19,5 cm - #R02: 12 cm - #R03: 10,5 cm (Backup Seed, 5Days Behind) ---------------------------------------------------------------------- #28/02/2025 Today, I only moistened the surface. Tomorrow, I’ll probably do a proper watering. ---------------------------------------------------------------------- #01/03/2025 I bottom-watered with 500ml of water and added 300ml around each plant. 💧 --------------------------------------------------------------------- #03/03/2025 Today, I diluted 10g of Bactomatik Rex by Agrobacterias in 4L of water and watered the three girls. Approximately 1.3L per plant 💦 This will probably be the last watering, I'll just use a spray to keep the surface moist for the rest of the week. 💚 #Bactomatik Rex by Agrobacterias # #COMPOSITION -N-2% -P-1% -k-2.5% -Amino acids: 10% -Organic matter: 35% -Paenibacillus azotoformans, Bacillus azotofixans, B. coagulans, B. megaterium, LactobacillusLus acidophilus, B. pumilus y Sacharomyces cerevisiae. --------------------------------------------------------------------- #05/03/2025 I'm facing some issues—before the last watering, the plants started showing yellowing on the leaves of the new branches. I believe I prepared the SuperSoil layer too hot, and as the roots reached the over-fertilized layer, they got affected. Some suggestions pointed to a nitrogen deficiency, but I don’t think that’s the case. I applied a good watering with Bactomatik, which contains 2% nitrogen and nitrogen-fixing bacteria. This was already a planned watering, and while the plant started stretching a bit, I haven’t noticed any improvements in leaf coloration yet. I’ll keep monitoring closely to see how it recovers. But If anyone has a suggestion pointing in a different direction, I'm here to listen! 👂 Over the next two days, I’ll start with LST, so that within 1-2 weeks, I can set up the SCROG net.