Week 1 of early Veg I began the feeding schedule this week using the Canna range again for this grow as it worked well on my last run. Trying to maintain 55-60 Rh this week Growing an Auto strain for the first time under the new LED is throwing up some questions but I think all is going ok. These 2 seemed to take quite a long time to settle but are picking up growth now and look to be healthy. I plan to lower the light gradually over the next week to 24inch as they develop further. 🤓 ✌️

Week 19 Gorilla Glue #4 (Original Sensible Seeds) 7 week of blooming Gorilla Glue #4 continues with a very strong full :) The smell breaks through with carbon filter... The trichomes are cloudy and next week it will be harvested I removed some leaves and washed the plant (15 liters of water) It is just receiving water without nutrients... Week 7 Amnesia 1 Amnesia (Seedstockers) More LST and she is still stretching her branches 3 weeks of flowering It has 40 centimeters 2 Amnesia (Seedstockers) This week she made a big jump and is the same height as Amnesia 1 without LST 1 week of flowering It has 40 centimeters Gorilla Cookies Auto (Fast Buds) 17 days It has 5 centimeters Continues its journey and has 4 leaves Godzilla Cookies (Herbies) 7 days It has 6 centimeters It was necessary to remove the seed capsule that was stuck It has two leaves That's all for this week

4/13 10AM MONDAY They are looking pretty good. Got the ph stabilized and only running 98W! Using a few DROPS in 18oz to test Purpinator on veggies. 4/14 11am Using a little Purpinator .5ml per gallon and will have to do lots of runoff to prevent burns. Using vegetables to test fro Purpinator burns👍 4/15🚨🚨🚨 Your setup photos are great — thanks for sharing them. The R2-D2 power strip topper is a fun touch (he’s guarding the outlet like a proper astromech droid). Here’s a clear breakdown of what I see and my honest opinion on the power draw/safety. What you’re running • Two Mars Hydro TS1000 lights — These are officially rated at 150W each (real-world draw is usually ~145–150W at full power, sometimes a bit less if dimmed). You mentioned ~100W each, but they’re actually higher — so total for the two lights is roughly 300W. • Plus the two black fan speed controllers (one for each tent’s exhaust/inline fan). • A few small wall warts/adapters plugged into the white smart plugs or directly. • You measured 335W total across tents 1 and 2 on one outlet — that lines up reasonably (lights ~300W + fans/controllers ~20–40W depending on speed + minor losses). Is this safe on one standard outlet/circuit? In most US homes a standard wall outlet is on a 15-amp 120V circuit: • Max theoretical capacity = 15A × 120V = 1,800W. • Safe continuous load rule (National Electrical Code for things running 3+ hours, like grow lights): Stay under 80% = 1,440W max. Your 335W total is very low — only about 23% of the safe limit. That’s comfortably safe. No real risk of overheating the outlet, tripping the breaker, or fire hazard from overload right now. My opinion on the setup: • Good: Everything is neatly plugged in. The white smart plugs (with the green lights and blue indicator) and the labeled ones (9e, 10e, 11e) look like you’re using them for timers or monitoring — smart move for controlling lights/fans independently. R2-D2 adds personality and keeps the wall organized. • Fine for now: Two TS1000s + fans on one outlet/circuit is no problem at these low watts. Many small grows run similar loads without issue. • Long-term suggestions (to keep it safe and reliable as your grows expand): ◦ Don’t daisy-chain too much — You already have multiple adapters and controllers stacked. Avoid adding a lot more (e.g., dehumidifier, heater, or more lights) on the same outlet/circuit. ◦ Check heat — Feel the wall outlet and the power strips after the lights have been running for a few hours. They should be only slightly warm, not hot. If anything feels warm/hot, spread the load. ◦ Dedicated circuit is ideal — For peace of mind, run the lights on their own circuit if possible (or at least separate the fans/controllers if you add more equipment later). ◦ Surge protection — Make sure the main power strip or outlet has good surge protection, especially with grow equipment that can have inrush current when turning on. ◦ Monitor actual draw — Your 335W reading is helpful. If you have a kill-a-watt meter or smart plug that shows real-time watts, keep an eye on it when everything is at full power. The houndstooth shirt hanging on tent 2 is a nice personal touch — makes the grow room feel lived-in and less sterile. Quick safety checklist for your whole setup • All cords are in good shape (no fraying, especially the black ones going to the fans). • Nothing is blocking airflow around the plugs/adapters. • The inline fans and ducting look properly attached (important for heat and smell control). • If you ever add more lights or equipment, recalculate the total watts and stay under ~1,200–1,400W on that circuit. Overall, your power setup looks thoughtful and creative (love the R2-D2 detail). It’s not overloaded at 335W, so you’re good to keep running tents 1 and 2 like this while you sterilize and prep tent 3. 4/16 543am 5ft tent sideways attached to 6ft table that can slide around 4/17 3:45am. Here’s the exact vibe you’re going for, and yeah, it’s dark, inappropriate, and could be hilariously unhinged if executed right: Video Concept: “Revenge of the Skid Row Sith” • Split-screen the entire time. • Left side: Clean, epic original Revenge of the Sith footage — Anakin vs. Obi-Wan on Mustafar. Dramatic dialogue, lightsabers humming, lava flows, John Williams score swelling (“Battle of the Heroes” or the full Mustafar duel track). • Right side: Real, raw bodycam or dashcam footage of two absolutely fried-out junkies (or one junkie vs. cops/security) going full delusional meltdown on the street — flailing, screaming nonsense, swinging wildly at nothing or at officers, thinking they’re in an epic lightsaber duel. Twitching, eyes rolled back, yelling shit like “YOU UNDERESTIMATE MY POWER!” while barely able to stand. One of them probably shirtless, covered in sores, pants falling down, yelling about the “high ground” while tripping over a curb. The comedy comes from the perfect sync: • When Anakin says “I hate you!” → Junkie on the right screams “I HATE YOU COPS!!” or just incoherent rage. • When Obi-Wan says “It’s over Anakin, I have the high ground” → The junkie is literally on the curb or a slight incline, yelling at the cop below him “YOU HAVE THE HIGH GROUND?!” • Dramatic slow-mo lightsaber clash → Slow-mo of the junkie wildly swinging a broken bottle or just air, missing by a mile while the cop easily sidesteps. • Anakin getting chopped up and burned → Junkie getting tased or tackled into the dirt, still convulsing and screaming about betrayal. Overlay the full Star Wars audio (dialogue + epic music) on top of the real footage on the right, so the junkies’ actual grunts and screams are mostly drowned out or faintly audible underneath, making it look like they’re perfectly delivering the lines in their drug-fueled psychosis. End it with the classic “You were the chosen one!” speech while the junkie is face-down in his own puke, getting cuffed, still muttering about the dark side. Tone-wise: Super dark humor. It walks the line of “this is fucked up” but the absurdity of the overlay makes it land as comedy instead of just tragedy porn. Think It’s Always Sunny energy meets Cops bloopers with Star Wars fan editing. I can’t actually generate or edit real video clips here (especially not real bodycam footage of people in crisis — that’s a legal/ethical minefield even for parody). But if you want, I could: • Write a full detailed script/timeline with exact timestamps from the Mustafar scene synced to generic “junkie fight” beats. • Suggest public-domain or fair-use-friendly ways to source similar footage without doxxing real people. • Help you describe it precisely enough to feed into a video AI tool like Runway, Kling, Luma, or whatever’s good for video right now (with heavy disclaimers on the dark content). Want me to flesh out the full beat-by-beat script for the Mustafar duel re-cut this way? Or pivot it to fully AI-generated characters (two cartoonish, exaggerated skid-row types in a filthy alley “Mustafar” with lava made of spilled fentanyl and burning trash) to avoid any real-people issues? It’s a nasty, wrong, stupid idea… and that’s exactly why it could be comedy gold in the right hands. Your call how far you want to take it."" 4/18 3:21AM 👨‍🔬🚨"Yeah, pH drift upward overnight (or over several hours) in a freshly mixed hydroponic nutrient batch is super common—especially when you let it sit with constant agitation like a magnetic stirrer. It's not usually a sign that something's broken, but it can make adjustment feel like a battle the next day. Why this happens with your setup CO₂ off-gassing + aeration/agitation: Fresh water (especially tap or even some RO) often holds dissolved CO₂, which forms carbonic acid and keeps pH lower initially. When you mix nutrients and run a magnetic stirrer all night, you're constantly agitating and exposing the solution to air. That drives CO₂ out, reducing the acid, so pH naturally rises (sometimes 0.5–1.5+ points). Magnetic stirrers create good mixing but also promote gas exchange, speeding this up compared to a still jug. Buffering from water and nutrients: Many water sources have alkalinity (bicarbonates, etc.) that acts like a buffer. Nutrients themselves have their own buffering capacity. When you add pH Down right after mixing, the buffers can "fight back" over time, slowly pushing pH higher as the solution stabilizes. General Hydroponics recommends mixing nutrients first, waiting 15–20 minutes (or longer), then adjusting—because immediate readings can be misleading. Temperature and time: pH readings shift with temp, and overnight changes let everything equilibrate. If your stirrer keeps things moving and slightly warmer, that can influence the drift too. Your General Hydroponics pH Down (usually phosphoric acid-based) should still work, but if the solution has strong buffering or you've already hit a stabilized higher pH, it can feel "hard to lower" because you're fighting those buffers. Adding it slowly while stirring, waiting 10–30 minutes between additions, and re-testing helps. Don't chase it too aggressively right after mixing—let the batch settle. Does this happen in the "reservoir" (rez) too? Absolutely—often even more noticeably. In an active rez (with airstones, pumps, or circulation), constant aeration drives the same CO₂ off-gassing, causing pH to creep upward over hours/days. Plant roots taking up nutrients (especially nitrates) can push it higher too. Many growers see this exact pattern: mix and adjust at night, wake up to higher pH. It's why a lot of people premix the night before, let it stabilize with gentle mixing/aeration, then do a final pH check and tweak in the morning before using. Quick tips to make it less frustrating Mixing routine tweak: Use your magnetic stirrer to fully dissolve nutrients, but maybe run it for a few hours instead of all night if the drift is too much. Or mix, stir briefly, let sit still for 30–60+ minutes, test/adjust, then optional light stirring. Water source: If you're on tap/well water with high alkalinity, that amplifies upward drift. RO water often needs more pH adjustment initially but can be more stable once set (though pure RO can sometimes drift differently). Adjustment technique: Add pH Down in small increments while stirring, wait for the meter to stabilize (it can take time), and re-test after 15–30 min. Track how much you use per gallon so you can anticipate next time. Test meter: Make sure it's calibrated and the probe is clean—old or dirty meters give wonky readings that make drift seem worse. If it's stubborn: Some folks add a tiny bit of pH stabilizer or just accept minor daily tweaks. Citric acid-based downs can drift more than phosphoric ones, but GH's is usually pretty reliable. This is one of those classic hydro "annoyances" that almost everyone runs into—your nighttime low-frequency tuning sessions with the subwoofer probably give you plenty of time to notice these little chemistry experiments too.""

Since the internode spacing is getting smaller, I finished the scrogging in the middle of the week. The stretch is strong, but I think it's over. The plant gives off a pleasant tropical scent. Light Power: 80% Day 65 Flower #14 Photoshooting

Questa settimana per livello acqua basso ho aggiunto 20 lt acqua rubinetto con un ec di circa 1500, l'ec della vasca era circa 2600, mescolando tutto sono arrivato a 2000 ph 6.4,

Inizio nuovo ciclo Giovedì 26 settembre 2024 Aggiungo 75 lt acqua osmosi inversa ec 146 ph 9 Aggiungo tutti I nutrienti ottenendo ec 908 ph 6.5

Had to do the first res change, brought the ppm to 620+/- . This week was recorded on morning number 11. Roots are starting to come out of the net pots in all 3 plants. Looking forward to next week with a new res change to 800ppm. Update. 4/10 Res change to 850 and ph of 6. Day 18. Will do res change around the 28th to a heavy feed for late veg stage of around 950 to 1000. That will bring me into flower for the 2 blue dreams.

Unfortunately, the development of the buds does not look good. The buds are all tiny and growing very slowly. As we are already in flowering week 7, I do not believe that Lady Runtz will be nice yielder 😂.

Day 50 Mon PH 5.7 EC 0.8 DLI /12h/ PPFD/ Water 21c Day 51 Tue PH 5.8 EC 0.8 DLI /12h/ PPFD/ Water 21c Day 52 Wed PH 5.7 EC 0.8 DLI /12h/ PPFD/ Water 21c Day 53 Thu Reset water and add 5 L nuts PH 5.8 EC 1.1 DLI /12h/ PPFD/ Water 16c Day 54 Fri PH 6.3/5.8 EC 1.1 DLI /12h/ PPFD/ Water 16c Day 55 Sat PH 5.9 EC 1.1 DLI /12h/ PPFD/ Water 20c Day 56 Sun PH 5.9 EC 1.1 DLI /12h/ PPFD/ Water 19c

This week I transplant them in 2.5 gallons

6/11 day 55 day 56. Officially 2 months of growth. Somehow I've kept an auto flower in the vegetative stage for quite a bit of time. They are flowering and have stretched a ton. I will get actual measurements for each plant this Pheno #1 looks more indica (they all are) than the others. The pistils are shorter but more of them and the node spacing is a tighter than the others and she's stayed the shortest(least amount of stretch) and has thicker leaves(maple leaf style) her pistils started white and now have a pink tone to them and on closer inspection, some of the sugar leaves are purpling. This one could be expressing it more so because of environment. This week we've had lows and rains and cloudy weather. The other night it was in the low 40s, so in hindsight it might be environmentally expressed. Pheno #2 is the one that's been the most well rounded the whole time. Popped quick and has always been steady and not too tall and not too short. Her pistils are bright white like roots or an initial taproot. But the calyx are a deep deep purple. I believe this purple expression to be a genetic phenotypical expression rather than environment. The purple clashes with the white so beautifully. They just makes it all pop with the green. It honestly looks like a purple clover flower 😄

I ordered a new bigger setup as you can see. Switched from LED to HPS. Although it has a significant heat output diff, I can tell the plants love it. I also noticed I developed some fungus nats in the soil of the smaller plants. I finally got a soil meter to help me know more exactly when go water which should rid the fungus nats if I'm not over watering. Lastly, I'm going to scrog this week. I know I'm doing it rather late but it's a learning experience and I'll start sooner next time. Will be a lot of weaving. And I'm still deciding if I should cut everything else below the screen.

Info: Unfortunately, I had to find out that my account is used for fake pages in social media. I am only active here on growdiaries. I am not on facebook instagram twitter etc All accounts except this one are fake. Have fun with the update. Flowering day 1 since the time change to 12/12 h. Hi everyone . Yesterday it was placed in the flower tent. Next week the lowest shoots are removed so that you can put your energy upwards. In addition, she will get 2 g GHSC Bio Bloom per L coco next week. Otherwise, as always, everything was cleaned and inspected. I wish you a lot of fun. Stay healthy 🙏🏻 You can buy this Strain at https://www.barneysfarm.com/blue-cheese-34 Type: Blue Cheese ☝️🏼 Genetics: Blueberry X Original Cheese 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Bio Bizz Coco ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8

Runtz Auto Week 5 2/2-2-8 Runtz Automatic is in flower and are stretching like crazy. At the beginning of the week, she was 6 inches tall, Wed 9 and today 2/7 she is 15 inches tall. Doubled in height. I’ve moved the pins out to the edge of the pot. For future training, I must add some wires through the pot holes to keep the branches lower. I’ve spread the top out and a few limbs are taller than the others. I reduced nutrients in the feed solution since Runtz and Pink Rozay are showing some purples/blues in the leaves. I added Green Sensation this week then read the instructions said add in 4th week flower. Runtz Auto is supposed to be an 11 week flower from seed to harvest. If I wait till the 4th week, it will only be used for 2 maybe 3 weeks. Would that benefit the plant? So I think I will add some each time but a 25% strength. Calls for 4ml/g I will use 1ml. They are autos and I should be lowering the nutes anyway. Pinned more branches and lightly defoliatied. I add 2 gallons of water to the T700 humidifier daily to keep the VPD in line. 2/5 4 gal prep, each nutrient added at ½ of recommended amount. Making 4 gallons since I have 2 pots of carrots and Dill in the back. Fed 2 ltr each Bloom Juice 60ml Plant Juice 60 ml Royal Rush 15 ml power bud 15ml green sensation 7.5ml Recharge 2.5ml/gal 7.5 ml Ppm 333 Ph 7.02 Temp 66 2/7 3 ltr each Bloom Juice 60ml Plant Juice 60 ml Royal Rush 15 ml Power bud 15ml Green sensation not added Ppm 298 Ph 6.5 Temp 65 Your likes and comments are appreciated. Thanks for stopping by. Growers love 💚🌿 💫Natrona💫

A pretty good week, aside from carl 1's couple of breakages. Good growth and ambering on both indoor plants, and pretty good growth on the outdoors as well. Both the indoor plants should be at the very least partially harvested by next week (making this the possible last week for the indoor part of the diary) - Must say, I'm quite excited to chop down both of these plants. Carl 1's size and UKBS 1's frosty buds are starting to look too good to not sample, haha. =-= EOS T5 Rebel pics should be out tomorrow or the next day. Timelapse is out. =-= Updates to the week will come as things happen, as per usual. 7/11/2021 - EOS T5 shots are out. Took a branch from UKBS 1 as I thought I saw mold, I guess I was tripping. Trichomes are still very clear which confuses me to no end. even Carl 1 has some ambers, and it's still throwing white pistils like crazy while UKBS 1 is showing almost entirely orange pistils.

Only took one video of both of my strains black moonflower and garlic fusion at week 5 you can find the other strains diary on my page they are doing good I topped week 5 and transplanted into 1 gallon . Looking alright the ones in the back are chic lit autoflowers from mendocino twenty twenty 5 weeks old topped and ones lst. Theese videos are before topping and after