Likes
Comments
Share
@BearBuds
Follow
This is a grow I did last season that went really well. Unfortunately I don't have any veg pictures but its still a cool grow none the less. This is actually week 2 of flower. The plants were defoliated and lolipopped just before the flip and they STRETCHED. The tent was small so the scrog nets were more for support than anything. We had been going through an incredibly hot year here and it was pushing 95 degrees during the day all the way through to October. Luckily my lights run at night to save on electricity bills so I learned that high night time temps are not as detrimental. Hope you all enjoy. Adding Greenleaf Nutrients part A and B at 2.4 and 1.8 at this point.
Likes
4
Share
@soloczek
Follow
The smell is just gorgeous, ppd favorite for sure like a bag of fresh berries. Guzzlerz starts to purple, whole underside of the leafs are black. Purple Coolies Kush behind of all plants but will be very iced
Likes
3
Share
@Smev1337
Follow
This week is all good and stable 😄 both ladys are growing good and having a healthy canopy also huge leafes! 😝 this will be some fun later with those plants 😉 happy growing all 💚✌️
Likes
11
Share
@Fyno_TH
Follow
✂️ Harvest — From Chop to Bubble Hash (Final Review) 🌿❄️ Harvest completed with dense, resin-heavy buds and fully swollen calyxes. Trichomes were mostly cloudy with a touch of amber, and the aroma at chop was loud — sweet, citrusy, and greasy, filling the room instantly 🍊🔥 After harvest, the plant was air-dried for ~5 days at 16–19 °C, keeping conditions cool to preserve terpenes and trichome heads. Instead of a full flower cure, I chose to process the harvest into Bubble Hash, focusing on resin quality and terpene retention ❄️🌿 The wash went very clean — trichome heads separated well, showing strong resin production despite earlier challenges during the run. Smell stayed fresh and powerful throughout the process, confirming the effectiveness of the environment control and flush. This grow was a big learning experience. From training in veg, managing powdery mildew in early flower, switching to RO water, and finishing with Flawless Finish, everything contributed to a clean and satisfying result. Ending with one plant proved that quality and consistency matter more than numbers 👑 Overall, very happy with the outcome — solid resin, loud terps, and valuable lessons gained for the next run. Looking forward to applying everything learned into the next diary 🌿🔥
Likes
16
Share
Soo this week has been “fine” . Humidity is under control finally , the humidifiers seemingly have gotten the environment in check . I noticed “it works more efficiently” if I leave a small amount of water in the reservoir as opposed to how long it takes humidity to drop after watering with the reservoir bone dry after emptying . I see that the top dress food still isn’t reaching the girls yet there’s more progressive lower leaf yellowing . I thought it’s take no more than a week for the waterings to render the amendments effective. Seeing this I’ll surely give the girls their pre flowering feed much sooner . I’m planning for 4 weeks so that by week 6(WISHFUL THINKING) the food will be accessible to the girls . Vertical growth this week has been decent , I was worrying quietly on the inside that I’d end up with nuggets on the lateral branches I’ve worked so hard to grow & constantly train. I want to see 12 in long dense solid resinous continuous colas on these girls . Anyways I think that’s it, another week on the GreeneScene in the books 📚.
Likes
5
Share
@ibbzy
Follow
Amazing growth. Pleased with these new LEDs. Lollipopped & defoliated, tried to leave some on the bottom, will probably pick a few more off this week Reducing lights to 11/13 and then to 10/14 at week 6. Trying something.(Emulating an autumn/fall environment with temprature drops also) Hopefully I can get the nice purple colours to come out. Will also be adding Deep Red now. UVA has been on all flower.
Likes
11
Share
@TechDCo
Follow
Week 1 27/01/2025 TF and MS Feed HydroSol: Increased to 8ml/5L 28/01/2025 TF and MS Light Increased: 313watts DLi: 35 Rapid Growth has started again. Feed Increased: HydroSol 10ml/5L HP 12%: 1ml/5L Uploaded today's pictures and yesterday's for comparison on how HydroSol is doing? I topped MS. Hopefully by doing this now TF will catch up but that's not why I topped her. She's known for being bushy; so will be good to bring her up to her second level before branching. Giving the rate she is growing; we haven't to worry about stunting Growth. H202 is also know to to cause mutations at high levels. I tried to start this diary with HP 12% from seed and it worked until micro-organisms in the air and water; what distillation has missed the "vocs" the cardon didn't catch. Caused them to later on because of free radicals and this is why high levels of HP can cause mutations and cancer when it steals atoms by ripping them apart. "Call the bomb swaddles" when mixed correctly or 'incorrectly 💣 lol 28th Today Little VT of the 5L jerry can starter pots (DiY) I think this process is allowing for optimization of Air/feed pks. I'm at least 2-3weeks ahead from a normal grow because of this style growing. I know, I know, I lost 3weeks from the first failed attempts. But it's okay 👍 I'm okay with that. Now I know and it's logged in the dairy for future reference I can quickly glance over before I start another one. Like hey 👋 "Time is valuable, read ya diaries" honestly, I don't have dementia i have human forgetfulness/error. Its still in the experimentental phase. Took tf out the propagator 31/01/2024 Nothing much to see I've did everything for TF and still looking droopy. Exactly the same as MS. I think she'll grow out of it! 01/02/2025 I know, I know what ya thinking, it looks like spider mites on MS only leaf but honestly I think its of the h202. I deffolled her only leaf. Sprayed it with h202 and no reactions happen. No mites. The Future TF is looking much more lively. Oh well. No speed-run this time round! I shouldn't of took 4wks off from growing. Rhythmic nature of thing and getting in the swing off it. It's easy to do but I am always in two minds with everything I do. I can't help but cause "Self sabotage' every time I get to ahead of myself, by running my mouth 💯 blah blah blah; always beside myself. Aye' they say "God is next to Cleanliness" if that's true it'll be impossible for me to be beside myself haha 😄 Its all fun and games 🎮 🙃 01/02/2025 Midday Light Increased: 560watts (max) for this power supply. I disconnected the 1200watts one for each light is 600watts. It's currently half-power with 600watts max for two lights at 300watts each. Better than having mishaps with the full power supply 1200 being turned up accidently say in a not ventilated enough little tent. I'd rather pass on that anxiety 🙃 Plants: Under jerry cans with dli at 20. This should by dinfintion let them gather themselves for 3days; while the sun is blazing outside the can. Even though I could lower the light. I think the high light intensity outside the cans the plants know. Midday VT MS looks likes shes a clone 😳 👀 but she ain't! One day I will get these protocols right. But atm ; atlas, it's all in jest n fun! MS defiantly looks like a clone but she's not; i have taken pictures since she hatched everyday 03/02/2025 Midday Freaky Pablo and The future 2 germinated Sprayed with weak solution of Hydroclonic Acid + h202 very mild. Now the fun begins!
Likes
5
Share
Likes
133
Share
@Qutro
Follow
As autumn approached, the number of daylight hours in the jungle slowly began to decrease. First to 16, two days later to 14 and at the end of the week 12. We let the girls rest and didn't have much to do apart from getting an even canopy under the screen.👨🏻‍🌾🌱 One plant showed some magnesium deficiency so gave her an Epsom salt cure. The nutrient manufacturer said that the product contains enough magnesium but apparently one of the girls didn’t find it sufficient. On day 3 watered them with de-chlorinated tap water and Silica, 3 litres. Day7 the first irrigation with Hybrid nutrients has been given, 5 litres each. I’m curious how this line will perform during flowering.💦 Running the Ts3000 on 75% , which means 520-620 PPFD. Vpd: 0,88-1,10 kpa. See you soon and thanks for stopping by.💨🌞
Likes
55
Share
@Max1973
Follow
Well, this was a interesting first journey.... the buds finished drying today, 5 days drying, added pics and vids. Just curing to go.... ah nice buds :) Edit: i forgot to mention i went over the buds when i harvested them, and checked / removed any impurities, like gnats caught in the sticky bud.... picked em clean with tweezers... 👍 Edit: needed to air/dry out the buds abit more, and get some Boveda Humidipak for curing.... it's looking good... i'll update with some pics of trimmed, cured buds 😎 The buds turned out beautiful, pungent, pine, berry, citrusy, daytime, medical..... this has theoretical 1:1 - 21% THC, 19% CBD, so it's not going to give u a knockout high.... its medical grade 1:1 ....... side effects - happy, relaxed. haha :) I weighed it dry and came up with about 123.32g (4.35oz) ... i used abit of guesswork in the weight, not to concerned with weight, as to quality.... (that weight is with the test buds added in, +-15g.) .... you can guess the weight from the pics and vids, haha I really enjoyed growing this.... i found the website by looking up the seeds, decided to start a grow diary, it's my first grow, i made alot of mistakes and growdiaries really helped alot, joined a chat group with some other really good growers. Edit - Day 111 - added vid/pic, Been curing for a week, burp and roll em abit twice a day....... smell and taste nicer each day, 👍 Edit - Day 112 - added good vid of trimmed up test bud, beautiful ...... I hope You enjoyed the Diary..... Good Buds 😎
Likes
7
Share
Hello growers ✌️ She looks nice but she needs more space. 😏 In the week, I'll probably move her somewhere. But I don't know where. 😏 Fertilization 16.6.2019 Fish Mix – 2ml/l Root Juice – 3ml/l
Likes
18
Share
@Diips
Follow
d.50 a few spots appeared on the leafs. gave a 10 ml dose of bio p k and waiting a week before giving a dose of orgatrex and bactrex edit: d.50 i also gave 0.5 ml of calmag from Biobizz edit d.53 will i be giving her the orgatrex and bactrex treatment ✌️🌞 d.53 she got 20 ml orgatrex, 1g of bactrex and 0.5 ml of biobizz calmag d.54 added scrog and did lst with clips to even out the height and space… still need to adjust it.
Processing
Likes
15
Share
Hola con esta semana ya quedamos al dia con el seguimiento ya que estaba atrasado en el tiempo. Se nota una producción de resina notable en esta genética que nos ha gustado mucho por su olor y estructura de las plantas . hemos creado un video por cada una de las 14 plantas del seguimiento, hay varias muy llamativas que están "pre-seleccionadas" para mantener a futuro, el olor que se llega a sentir es muy florar y dulce, si tienen alguna pregunta no duden en preguntar saludos. Hello with this week we are already up to date with the follow-up since I was late in time. There is a remarkable resin production in this genetics that we liked a lot for its smell and structure of plants. We have created a video for each of the 14 floors of the follow-up, there are several very striking that are "pre-selected" to keep in the future, the smell you get to feel is very flowery and sweet, if you have any questions do not hesitate to Ask greetings.
Likes
23
Share
@Kynareth
Follow
The plant keeps developing good, slow but she looks very healthy and happy.
Likes
23
Share
Just a little aggressive on the nutrients. Gonna give it plain pH down water this time.
Likes
11
Share
Will update more once cured. Very pleased with this muster strain and have already purchase two more mix packs and will be planting more soon.
Likes
14
Share
This was another very good week for the plants, with the flowers beginning to swell up and take shape. Some of the lower leaves are starting to yellow, but this is expected. As the light doesn't penetrate as far, the plant will begin to 'consume' those leaves and drop them to redirect energy to the tops. The canopy is fairly even apart from 1 small spot, which does not have any colas at all. This is due to me bending away the GSC that was topped, with the intention of the lower branches stretching up. This happened with all the other plants I did it to, but not this one for some reason. I think it was due to airflow around the budsites so I added an extra fan last week to hopefully improve this. The strongest looking plants by far are still the ones that were Topped with LST, followed by the mainlined, with only LST in last place. I have found that the LST only ones do not have stems as thick as the others, so this may impact yield later. Not much done in the way of training apart from the odd leaf bending or stem tying. The next few weeks will most likely be fairly uneventful, as now we just need to wait for them to flower fully :D