Likes
Comments
Share
WEEK 10 - 25/9/2021 - 1/10/2021 30/9/2021 - No major issues these past week. Plant 1,2 and 3 responding really well to scrogging. The original purpose of the net was to support the buds actually. But since the net is in place, I thought it would make more sense  to use the opportunity to bring the 3 plants to the same level as plant 4. Despite that, plant 4 still has trouble catching up and plant 1-3 just stretched like crazy. Plant 1-3 have started flowering and stretching. Not plant 4 though. No signs of stigmas yet. Weird genetics. Been having issues since germination. Major defoliation done for all plants. Sucker branches removed and LST readjusted. Complete res change done. 30 gallons of water mixed with the following: Liquid Silicon - 1ml/gal - 30ml Cal-Mag - 2.5ml/gal - 75ml Micro - 3.5ml/gal - 105ml Gro - 2.5ml/gal - 75ml Bloom - 3.5ml/gal - 105ml Hydroguard - 2ml/gal - 60ml pH - 6.12 EC - 1.21 mS/cm T - 24.5
Likes
11
Share
Questa l'ho superata al 5 nodo e successivamente il secondo nodo avendo così 8 apicali....questa e stata la struttura vincente infatti penso che da adesso in poi sarà questa la struttura che farò con le autofiorenti perché e intermedia fra uno stress troppo forte ed uno stress un po' più leggero ed ho notato che tutte le piante adorano questo tipo di potatura.... infatti le foto parlano da sole! Ringrazio ANESIA per questa splendida genetica forte e dalla struttura pesante! 🌈🌱🌈🌱🌈
Processing
Likes
17
Share
@BlumenBot
Follow
12/28 - growing nicely, plenty moisture so feeding will be a while. 12/30 - updated my feeding chart after some conversation with NPK rep. I will be removing the shoots from the "node 2" branches, then topping "node 2" and "node 3" branches later this week. Update: removed 2 shoots from node 2 branches, 2 left as they are smallish. 12/31 - she is doing really well! I may start training the branches sideways tonight! Happy New Years from BlumenBot!!! Shared a time-lapse video too! Update: trained her a bit 1/1/21 - made it to 2021! I removed the restraints for not to let her grow a bit more without additional stress. Hoping to feed Sunday 1/2 - restraints are back in place, mixed some feeding for tomorrow 1/3 - fed her then tried to train her and broke one of the 2 main branches right at the main stem....trying to graft it back together with some tape...not the first time I've broken a branch but the first time its completely broken off....we shall see how this goes....fuck! RAW feeding: 2L Distilled Water 2G Grow 0.18G Phosphorus 2G Microbes Grow 0.13G Enzymes 0.63G Amino Acids 6.0pH 676ppm 71.8*F Update: abandoning the graft attempt and just putting the broken branch in rockwool and right in the soil more or less in its original spot...experimentation at this point... 20 mins later the cut branch is already perking up!
Likes
26
Share
The cannabis plant is in excellent health, showing vibrant green leaves and a robust structure. The overall appearance suggests that the plant is thriving in its current environment. No signs of nutrient deficiencies, or diseases have been observed. A light defoliation was performed during this week. This practice will help the plant focus its energy on the upper buds, leading to better yield and quality in the upcoming weeks. The plant has been fed according to the BioBizz nutrient schedule, specifically following the guidelines for week 2 of the flowering stage. The nutrients provided include BioBizz Bio-Bloom, Bio-Grow, and Top-Max, which have been carefully measured and administered to support the plant’s transition into full flowering. I'm curious to see what will become of the plant. Stay tuned! 🌱🌱
Processing
Likes
201
Share
10/5 Day 28 - LED lamp now on 24h - Water: Both plants got 1L of water with nutes. Summary for the day: I still do some LST but truing to do less and focusing on spreading the tops. LED in 40cm full effect. Did some defoliation today but not sure if I'm doing right. - 12/5 Day 30 - LED lamp now on 24h - Water: Both plants got 1L of water with nutes increased to 1.5ml because it's been 10 days since I started with giving them 1ml each time they got water. Now I started to see they drink much more. Last time it was 3 days between watering. This time it was only 1 day since they got 1L water. Maybe increase 1L to 1.5L next time. Summary for the day: I still do some LST but truing to do less and focusing on spreading the tops. LED in 40cm full effect. Did some defoliation today as well. - 14/5 Day 32 - LED lamp now on 24h - Water: Nothing Maybe increase 1L to 1.5L next time. Summary for the day: I still do some LST but truing to do less and focusing on spreading the tops. LED in 40cm full effect. Did some defoliation today as well. - 15/5 Day 33 - LED lamp now on 24h - Water: Both plants got 1L of water with 1.5ml nutes x2 (A+B)
Likes
20
Share
Gracias al equipo de MSNL y XpertNutrients sin ellos esto no sería posible. 💐🍁 Forbidden Fruit Auto: Forbidden Fruit Autoflower, llamada así por sus deliciosos sabores, es un cruce entre Cherry Pie, Tangie y Siberian Ruderalis. Esta variedad ofrece efectos estimulantes y relajantes con un sabor afrutado, cítrico y a pino. Ideal para quienes buscan un dulce escape. 🚀🌻 Consigue aqui tus semillas: 💡TS-3000 + TS-1000: se usaran dos de las lámparas de la serie TS de Marshydro, para cubrir todas las necesidades de las plantas durante el ciclo de cultivo, uso las dos lámparas en floracion para llegar a toda la carpa de 1.50 x 1.50 x 1.80. https://marshydro.eu/products/mars-hydro-ts-3000-led-grow-light/ 🏠 : Marshydro 1.50 x 1.50 x 1.80, carpa 100% estanca con ventanas laterales para llegar a todos los lugares durante el grow https://marshydro.eu/products/diy-150x150x200cm-grow-tent-kit 🌬️💨 Marshydro 6inch + filtro carbon para evitar olores indeseables. https://marshydro.eu/products/ifresh-smart-6inch-filter-kits/ 💻 Trolmaster Tent-X TCS-1 como controlador de luz, optimiza tu cultivo con la última tecnología del mercado, desde donde puedes controlar todos los parametros. https://www.trolmaster.com/Products/Details/TCS-1 🍣🍦🌴 Xpert Nutrients es una empresa especializada en la producción y comercialización de fertilizantes líquidos y tierras, que garantizan excelentes cosechas y un crecimiento activo para sus plantas durante todas las fases de cultivo. Consigue aqui tus Nutrientes: https://xpertnutrients.com/es/shop/ 📆 Semana 6: Buena semana, ha habido sol agradable y buenas temperaturas, empiezan a salir varias preflores. Mantengo las dosis de nutrientes a 1/3 de lo recomendada por el fabricante al estar en suelo virgen ☘️🌲🌳 dentro de macetas geotextiles.
Likes
6
Share
@gse314
Follow
Did my 1st topping of 3 kicking off 5 week of veg the seedsman Fuel D. OG is growing bigger so far
Likes
6
Share
@Kannamar
Follow
Well that was a special day, it always make me sad in a way, but this time, I enjoyed the moment a lot. As I wrote in a reply to a comment, things can always be better, and they are with good decisions at the right time. These are the smallest and the biggesr plant, one seed didn't germenated and that's why I had to put a Red Gorilla. Not sure I will try a main mlinning on auto flowering strains any more.... but I think I did it wrong, first I took the one that seemed less strong for the experiment, and having 2 other plants to compete for lights. FIM is definetly a technique I will reuse if needed. It's so nice to have these genetic contrasts, colors, aromas, shapes. Many thanks for all the help you gave, precious. 19/04/2024 lower popcorn buds seems dried already! But still branches don't crack on bends. Will check again on Monday. I finally have received, lately a portable microscope, will be more ususeful next year! But this confirms that lower buds might have need more maturity but did the choice to not over complicate by harvesting in 2 times, my indoor tent is also my drying tent, and I wouldn't have any other place to dry the upper buds separetly while allowing the remaining to harvvest with more maturity. In general I think I might have began the Final part too early. BTW, we smoked the popcorn bud, and it's very promissing, we liked it.
Likes
5
Share
Week 4 / flowering Everything is going very well. The pistils are swelling rapidly at the start of the fourth week. Monster, PK, 52, and 34 are all showing strong development. I’ll gradually increase the Bloom nutrients and add Crescendo more Booster subsequent to the final two irrigations using humic acid and low-EC water (~500 ppm), the crop is ready for controlled fertilization Repotting : 23/04/2026 12/12 swtich:15/04/2026 Middle: Strawberry Lemonade 16-20l x2 Background : Amnesia Lemon :11l x2 Front : Cherry Mc Muffin 7l / Oreoz : 11l Topping : 01/05/2026 Light : 60cm-75cm / 75-100% dimmer 24-26 degrees / 30-40 % hygro 22-24 degrees Watering is light at this stage — around 1l2;2;2l5 depend pot size ( 1. watering humic ; 2. if plants show excess signs(1) if not, 3. watering with fertilizers flower )700-1000 ppm calmag 1/2 watering
Processing
Likes
34
Share
All I can say is WOW! Sour Diesel Haze is HUGE! Tons of bud sites developing all over and looking beautiful! She has the potential of being my largest plant to date! Looking forward to watching her buds fatten up and harvesting. 👍
Likes
2
Share
@Jesperado
Follow
Great progress this week—the plants are now covered in flowers, and all four are showing remarkably even, vigorous growth. Everything points to this becoming my best harvest of the year. I’ve kept the watering routine consistent, using molasses regularly and occasionally supplementing with Epsom salt and calcium acetate. The guano is already providing potassium, but next week I’ll give them an extra boost using water made from boiled banana peels.
Likes
11
Share
@molvera
Follow
This might be the last week before chop... Most pistils are already orange. Not a lot of smell in the grow room, the green one smells like green apple candy, and the purple/red one like grape bubble gum. I've had many humidity problems lately, thankfully Dr Zymes has got my back keeping the PM and fungus at bay.
Likes
111
Share
@DevilsBud
Follow
10/10/21 new week for Hyper glue Growing almost a month now did some topping last week and today started to LST the main everything going great so far plants loving the new FC-4800 so as i absolutely no extra heat is coming of them 👌🏻 I maybe will top some more but as far it Goes for LST this will be the only thing i will do to the plants let the rest grow freely one hyper glue has to wait for main LST 12/10/21 The other hyper glue got LST clip on the main and think this was one of best ones so far 14/10/21 Growing very nicely giving them the watering and nutrients when they need it . I am trying to understand plants better by looking at feeling soil etc instead of a regiment. And learning we do every day because bin growing in 11L pots but now in 8L pots so that means that there gone be smaller then my first grow . But hey got now 12 plants going on and not 4 so that will help lol 15/10/21 Did some small defoliation and some of them get light penetrating better visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Fully marshydro supported Setup: Marshydro GT120x120x200 Marshydro FC-4800 LED lamp Mars Hydro tent handy info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter.
Likes
7
Share
Likes
57
Share
@Lukush
Follow
Queen girl coming up nice and happy, 3 week of veg. ✌️✌️
Processing
Likes
2
Share
End week 9 Changed the nutrient solution and plucked a couple fan leaves along the way. They look happy and healthy and I'm letting them take over this 5x6 space I usually put 6 ladies in. Excited for the outcome of these plants.
Likes
24
Share
The week was great. The roots took to the 1/4 nutes and I’m expecting beast mode soon. Stems are ok, stalks are good until you’ve gotten trunks. This ebb and flow NFT system is the way to go for me. I red something a while back about “kiss” keep it stupid simple. This setup does that and triples anything in souls I’ve ever done. My only new issue is that my humidity is quite a bit higher so I see myself investing in dehumidifiers down the road.
Likes
52
Share
The week starts Monday, Dec-23 in vegetative stage. Installed the ScrOG net Set at 20cm from the base of the plants, being 55cm from ground. Great growth and more LST The plant is showing great growth, lots of branching and new growth sprouts. A few branches are beginning to come through the net and almost all main branches are now tied down horizontally after the two recent toppings. Applied more LST and will wait for the branches to reach the net and start tucking. Adjusting the extraction fan Auto settings The AC Infinity fan is currently only running intermittently with its current settings. This seems to impact the utilisation and effectiveness of the carbon filter in use. The desired outcome is for the fan to be running for longer periods whilst in Auto config. Lowered the High Level Humidity from 70% to 60%, and more importantly, lowered the Max Speed from 4 to 2 with the intent that a lower fan speed will result in longer periods where the extraction fan is operated to remain below threshold targets for the grow space. Plant growth continues to be strong at the end of the week. Big fan leaves near the top are beginning to look a little serrated and dark, similar to the start of this grow. This may be due to the extra CalMag being added which was the issue at the start of the grow. Will keep monitoring and half the CalMag dosage on next feed. Importantly, I have learnt nutrient mixing of the CalMag should be done prior to the Canna Coco A & B. To date I have done the opposite which may explain my earlier issues. Fertigating daily at the start of the light cycle. One more week of vegetative growth before switching to flowering although I may need to switch earlier due to the vigorous growth and considering the stretch yet to come.
Likes
15
Share
@Roope
Follow
Hello this week has been so chaotic by personal life that these baby's has been not best cared but they seem to forgive it to me? My amino acids end so I put 1.3ml micro if it have some kind effect? Hairs are getting colored and THANKS big time for tips! There was some sh.t what's blocking water flow + fan burns are the things that costs perfect color at the corner but I'm clad that mistakes happend so I can learn from them. But nothing major haven't happened and amino acid stay at food circle till the end and some bud bluster come as well but till next week. ReggeyOkkey
Likes
120
Share
@StarLorr
Follow
Welcome to my Strawberry Pie diary.🍓🥧 In this Diary: Seeds: [420 Fast Buds]from my growmie Tropicannibis_Todd 👊🏻😎 Media: Pro~Mix HP Open Top Grow Bag, Connect. Nutrients: Green Planet Nutrients, 2 Part Dual Fuel starter kit. RealGrowers: Recharge. Diablo nutrients: Ripping. Feeding : Tue 26Mar: 2L Nutes/Recharge pH'd 6.5 Fri 29Mar: 2L Monster K pH'd 6.5 ___________________________ The buds are ripping smelly good😋 Trichomes are white and the amber should be at my satisfaction by next weekend, sorry for the quality of the trichomes video... i know it looks like the same cameraman who captured UFO🛸on a pogo stick... will try harder next time😅😂............ i can see the finish line🏁👀1 more lap😎 ___________________________ Thanks for stopping by, likes and comments are appreciated.👊🏻😎 Keep on growin! Keep on tokin!!! 😙💨💨💨💨💨