After not growing for almost a decade, it’s absolutely nostalgic and somewhat of an emotional moment to finally finish a grow again. I never thought I’d ever be able to do it again, But it feels really good after all this time and I appreciate all you joined me on this journey. I’ll be back soon; very soon! Stay tuned :)

Green Poison Fast F1 from Sweet Seeds Harvested in 2020 - Return of the Clones! This grow was from clones from first grow. Had to re-cut a 4th clone, and it was 16 days behind the rest. While it is pictured on the way, the 4th laggard is not included in the harvest week. Some other pictures of clones were related to regenerating the mother plants that had grotten rootbound. It was a perpetual garden back then.

Day 64, Things are getting interesting. First of all I will say the terps are here! There has been a big increase in that department and I'm pretty happy about it. The fade is in full swing and it looks like we have two black phenos in the house. I was hopeful to get at least one. These girls are starting to finish out but not all at the same time. When the tent is overall in the best state I'll chop them. Most of this is going to concentrate anyway. Of course I'll cure some hand selected tops.

This week hopefully i will get some good growth rate so I can perform topping and lst in week 3, my temp is quite high today reaching 34 degrees it just shows the resilience of these little plants. Humidity is at a steady 40% which I don't mind as then flowering plants need that. Day 18 on barneys watermelon zkittles and I changed the light and installed the ac infinityn 6 inch just need to put the filter on but need brackets its a beast lol. All mounted and tested all is good. Tomorrow I will be feeding molasses and phed water and topping the barneys watermelon zkittles. Day 19, good growth nodes are getting longer now, im not sure.if to top and lst or let it run and grow and minor lst and defoliation. Any input would be much appreciated. Day 20 topped and bent over ready for lst in a few days. Showing sex now with white pistols

Another big photo dump! I've completely cut out the FloraGro now. Flowers are starting to fatten and the lowest buds look very mature already. Excited to see what happens in Late bloom!

COMING SOON!! FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA PROMO CODE: rocknroll https://growdiaries.com/diaries/112437-grow-journal-by-rock-n-roll-randy/week/593118 Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

This strain my favourite I love her orange smell and lots resin on sugar leaves lots off them I let her grow atleast another week or more and still feed her with nutrient maybe start flush next week will update every other day new pic or videos thanks everyone Update I think she is bruce banner coz she slow flowering and take over 11 week to grow witch is and also smell and bud shape Today I seen most steam bend down and they need support so I try my best I will feed her till day 84 then I give her just ph water for week and hopefully around day 90 she is ready Day 83 top leaves start getting yellow 💛 so it's good thing plant go to last week off flowering

Ich hab die Woche früher lollipopping angewendet als gewöhnlich, da ich erneut Probleme mit Luftfeuchtigkeit habe, aber alles kein Problem

I harvested 24 cuttings from the White Shark mom this week, which was the first time she donated! She recovered fully within a few hours. Some ongoing maintenance pruning/training on deck for later this week. The 2 new moms (XXL & 8 Ball) are looking beautiful. I’ll be topping them soon to start working on structure.

Temps have been very high around 87 but humidity has been at a cool 58-67 keeping vpd 1.1-4 not sure if that’s good or not

Hello Diary, The first week of flowering is behind me and as you can see in the photos, the Medusas are developing very quickly. The flowers have formed and now the flowering begins. Trichomes appeared around the flowers on the leaves, which is a great sign for this stage of the plant. What you can see is that the plants differ slightly in structure, one is taller with fewer leaves and a more sprawling structure, while the other is more of a bush shape with lots of leaves. In the description of this strain, they should be equal in structure, which is not the case, at least for me. I removed the humidifier so that the humidity in the air dropped to about 50% and the temperature rose to about 24 degrees. Watering has become a little more frequent, which is to be expected given the size of the plants. Here's what it looked like last week. 18/02/2023 - Day 25. Watering. I prepared 5 liters of water, lowered the pH. to 6.0 and watered both plants with that amount. 21/02/2023 - Day 28. Photographing and height measurement. Medusa F1 #1 - 47 cm Medusa F1 #2 - 40 cm That's all for this week, see you soon and thank you all for your support.

Day 17 17/07/24 Wednesday De-chlorinated tap Water today with calmag pH 5.9. It was a humid week🤦‍♂️, green house could not air out!! She is surviving and doing well though. Day 19 19/07/24 Friday Lite Feed today, 250ml each pot small run off. Seeing excellent start to these babies. Let's get it 👌💚 Day 21 21/07/24 Sunday De-chlorinated tap water pH 6 with calmag 5ml to 5L. Watering in 1L each day from now. Updated video

Day 92 1000 tap added 6.3 700 Tomorrow will be three weeks since res change. Day 93 1000 tap ph5.46.1 ppm710 Another tiny nanner plucked from another bud. Day 94 Three weeks since res change. She drinks about a liter a day. Looks cooked tbh. First I've read that if/when sugar leaves' tips start burning it's better to harvest, second I checked the trichomes: lowest buds are quiet transparent, but there are amber heads on the top colas already as well. So I guess I should prepare for harvest. I don't know if I should flush. Day 95 Welp after reading a few articles and being bored I decided to change her res one last time to just cold tap. I'm not even gonna ph it, hope I'm not gonna regret it. Update: PH rose like crazy and I had to add some PH minus :) Sugar tips are badly burnt. Day 96 And I sent her to chop town.

Day 43, week 7 starts, these girls keep growing like crazy. I decided to defoliate them and only keep the tops for now, except for one of them that is so wide and low that I left some side branches at the same level of the tops. Day 45. Great general conditions, they want more food than ever as the flowering stage come closer

📅 Week 1: The Micro-Mission Begins! 🥦 Strain: Sticky Broccoli Auto 🥦 Stage: germination Light Schedule: 18/6 📝 The General Vibe Welcome to my micro-grow experiment! I'm using an extra Sticky Broccoli Automatic seed from my main grow to see what I can achieve in a small space. She's popped and is looking healthy! This is going to be a fun little side project. So original I popped one 6.01 but she did not Survive, I guess I have over water her the new one have survived so far. It will be nice experiment and challenge! 🌡️ Environmental Data: 💡 Light: @ 70% intensity 🌡️ Temp (Day/Night): 27°C / 24°C 💧 Humidity (RH): 65% 🚿 Watering: Mist the soil surface daily to keep it moist ⚗️ pH : 5.5 🍽️ The Menu (Nutrients) Powered by Plagron Biobizz root juice 3ml

Last straight before flushing this run was very pleasant and relatively easy I feasted on this session On these different tests I learned a lot about cars Among other things that the LST is essential and that the different apical or other sizes are to be avoided because their predefined life cycles do not allow them and this generates a loss in performance To return to my five damsels The northen light auto at @RQS was the fastest the first amber trichomes appeared at day 56 I did not expect taken from court I start rinsing The bubblegum from 00seeds still has not bloomed I plunged into the dark 20h .... The blueberry auto # 1 of pevseeds is simply gorgeous rugged and will surely give me a nice harvest it has suffered pinch of Apex and LST The gorilla glue from @fast_buds is not left smaller than the bonsai style but very well trimmed she suffered LST Apex pinch and size of the main apex ... Et en français Dernière ligne droite avant le rinçage ce run à étais très plaisant et relativement facile Je me suis régalé sur cette session Sur ces différents test j'ai beaucoup appris sur les autos Entre autre que le LST est primordial et que les différentes tailles apicale ou autre sont à proscrire car leur cycles de vie prédéfinie ne leur permettent pas et cela génère une perte au niveau du rendement Pour revenir à mes 5 demoiselles La northen light auto de chez @RQS à étais la plus rapide les premiers trichomes ambrés sont apparus au jour 56 je ne m'y attendais pas pris de cour je commence son rinçage La bubblegum de chez 00seeds n'a toujours pas fleuri je l'ai plongé dans le noir 20h .... La blueberry auto#1 de pevseeds est tout simplement magnifique robuste et va surrement m'offrir une belle récolte elle a subis pincage d'Apex et LST La gorilla glue de chez @fast_buds est pas en reste plus petite du style bonsaï mais très bien garnie elle a subis LST pincage d'Apex et taille de l'apex principal La blueberry auto#2 de @pevseeds Est pas mal mais on voit nettement que le main lining subis la stréssée et par l'occasion perdre de sons rendement final je souligne la robustesse de cette variété Merci à tous d'être passé pas ici Que la force soit avec vous !

An in to soil she and her sister testers go, i know that for know everything looks the same , apart from the photos, but this will start changing with them growing. For now all of them are growing pretty much the same and now that they move in to soil and start feedings they will start showing the phenotype and genetic differences, but for now all looking great , healthy and strong af!!! Haded a intro video from seed in to now, including how i transplant and what i use wen doing it so, and from here the moon is no limit for this babes i believe , so stay tuned as this testers they promise to be a interesting ride <3 <3 <3 They grew amazing for only a week fast and vigorous, all the testers for now look very the same <3 <3 <3 As always thank you all for stoping by and for supporting me on this journey, i am super passion about growing and fell blessed to have you all with me on this new journey <3 <3 <3 Genetics - Fast Buds Tester 08 09 10 11 Ligth - LUMATEK ZEUS 465 COMPACT PRO 
Food - APTUS HOLLAND #aptus #aptusplanttech #aptusgang #aptusfamily #aptustrueplantscience #inbalancewithnature #trueplantscience #fastbuds #dogdoctorofficial #growerslove With true love comes happiness <3 <3 <3 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so <3 <3 <3 
All info and full product details can be find in can find @ https://2fast4buds.com/ wen released 

https://aptus-holland.com/
 
https://autopot.co.uk/ 

https://lumatek-lighting.com/ <3 <3 <3 Growers love to you all <3 <3 <3

------GENERAL COMMENT------ This week was very flat and steady, girls are growing very well and leafs got sharper. They have got a new defoliation session, and a bit of supper cropping to make steams stronger. Nothing fancy, just training to an even or more even canopy. ------SM.BB COMMENT------ All good, growing very well and vigorously, accidentally snap off a hole stem supper-cropping, nothing to worry about, but was a pity...

6’-4” & 5’-8” as of today, 6’-0” average height. These ladies are beautiful! Everyone who comes by the house just stops and stares when they get near my garden. So do I 👍🤣 I had to move some plants outdoors from my indoor grow due to losing the battle to high heat and humidity. Two are super close to harvest, one might get cut over the weekend. Feel free to comment and let me know what you would do. Thanks!