Likes
Comments
Share
Entrando en prefloracion, mucho calor pero aguantan bien
Likes
9
Share
@Swoky
Follow
We are getting bigger day by day. Maybe web to support this laddies wil be next good.
Likes
10
Share
@Cronic
Follow
Week 9 Flush week for PE1 & PL1. Most pistils are brown or are browning and a large portion of trichomes are turning milky with some turning brown so, another week and they should be ready to harvest. PE2 still has little more time and should follow a week after. PE1 is looking and smelling mighty tasty. She's filled out nicely with clearly defined chunky buds. I just can't wait to trim those down. Despite being outside I can smell the pineapples on the groundfloor at the other end of the garden 😂 PE2 is also looking beautiful but still, has a few weeks left in her. The lemonade could be chopped now in my opinion however, I wanted this one to be my nightime smoke so i'm going to let her mature another week and chop along with PE1. She's so compact I can't really tell where each bud site is, guess i'll find out soon. I've also been preparing my shed for drying. Last season I used the office and stunk the entire house out, it was so strong at one point it made me feel a little sick. My wife, well, she was NOT happy; I'am amazed how she puts up with all my shit, she's an awesome girl. So rather than put us all through that again Inchose the shed. The challenge with the shed was to get rid of the smell. The people who lived here previously stored pool chemicals in there so it took me a few months to get any residual smell of chlorine etc out. It now just smells like somewhere dark so, should be good. The only concern is airflow. I have a fan in there but there's no ventilation. I could keep the door open but I don't want to encourage anyone to go looking for its source 😁
Processing
Likes
2
Share
Likes
14
Share
@Dunk_Junk
Follow
12cm growth this week. Flowering stretch slowing down. 💪
Likes
15
Share
I got plague of fungus gnats I put down 2️⃣🌲 because signs off herm from top to bottom Smell great like🍬🍉🍏🍎🍓 amazing smell like all fruits all over the world mix together + sweet like bubblegum
Likes
63
Share
Likes
21
Share
Day 78, I switched plant #2 to an all PK diet with FloraFlex Full Tilt. She’ll take up the whole 3.5 gals of nutes by Wednesday. I’m then going to begin my 3 day flush Wednesday evening. And I will chop her on Saturday evening. I also took a little sample nug off plant #2 just want to compare non-flushed to flushed weed. Also see how much they shrink in size. Day 79, Plant #2 is on schedule to start flush in 2 days. And I will give her the chop this coming weekend. Going to try a ice flush using frozen water bottles to see if I can help bring out more color. The other plants #1 and #3 are still a two weeks or so away from being chopped. Day 81, started the 3 day flush on Plant #2. And took some more photo shots of her buds and a 360° view video. Day 84, Plant #2 got the chop. Wet weight, before light trim and removing large stems is 760 grams!!! I will update once they finish drying, and then again once I finish the trim and about to jar them for cure. Plants #1 & #3 are still flowering, probably another week or two before they are ready to be chopped.
Likes
22
Share
@Fatnastyz
Follow
10-18 She hasnt even acted like I bent her top! Recovered nicely. Her buds have turned upwards to welcome the light! 😁 10-19 Water, noticed some slight burn, will flush her next day or so. She looks pretty good other. Spaced some branches just just a tad. Cleanin up, while she fattens! Has a minty smell. I know Im rough, very grateful for these beans Weedseedsexpress!💚😻 Ill get my shit together! 💪🤘 .
Likes
4
Share
Twenty20 Ateam R&D Update! Let’s Go week 1 of veg!!! The lil babies all got there first feeding of nutrients a they seem to be loving it , nice an healthy lil babies! 1/4 tsp of rapid start, 1/4 tsp Floramicro, 2tsp CaliMagic, 1/4 tsp Floragro , 1/4tsp floraNova bloom all PHd at 6.5 ! I didn’t know how to input this in to the grow diaries thing so I’m giving the info here yall! Hope you all enjoy an stay tuned for next weeks R&D update! Peace love an positive vibes to y’all Cheers 😶‍🌫️💨💨💨💨🤙🏻
Likes
18
Share
~ FASTBUDS TESTER #2204 ~ Well friends, here we go on another 'canna-venture' together! The grow room has had a complete remodel and some upgrades done to it including brand spanking new 4x8 and 4x4 tents and a Trolmaster Hydro X controller along with a new Control Panel. This tester strain is one of six tester strains that FastBuds has graciously provided me with and I'm looking forward to seeing what this girl has to offer when she's grown to her full potential! One drawback of 'testers' is I have little to no information on it other than its number and that it's an autoflower... 🤪 But, it's ALWAYS a blast growing them for me because not knowing a lot allows me to just concentrate on the essentials: Light, Environment, Water, Nutrients and possibly a bit of LST... not complicated, just basics like keeping a constant temperature and RH in the tent at a level that gives a good VPD, watering when almost dry and maintaining proper light levels according to their stage of growth. ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ ~THE SETUP~ ~Initially seeds were lightly scuffed, then soaked for 3 hours in 78℉ distilled water after which they were transferred to moist paper towels laid out in a Jiffy Pellet plastic starter tray with lid. Underneath the tray was placed a Vivosun Heat Mat with Controller that was set to 78℉ where they stayed until their tap roots emerged. ~Planted into Jiffy Peat Pellets that were hydrated with distilled water warmed to 78℉ with a 7.0 ph. ~Once roots emerge from the Jiffy Pellet they're transferred to their fabric pots. ~Grown 100% organic in a 4g Gronest fabric pot and a 3g fabric pot by Wraxly filled with Mother Earth 70/30 Coco/Perlite medium and initially amended with Dr. Earth 4-4-4 / Earthworm Castings / Dr. Earth Flower Girl 3-9-4 and Coast of Maine Stonington Blend Organic Plant Food 5-2-4. ~19/5 light cycle for the entire run with supplemental UVA added during flower. Lights are controlled by a Trolmaster Hydro X controller set for a 15min Sunrise/Sunset simulation. ~Top dressing every 3-4 weeks with slow release dry amendments and Earthworm castings. ~Straight water ph'd @ 6.2-6.8 when needed and bi-weekly Compost Tea's. ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ Weekly Updates: 1/19- Here we go into Week Three of flower and these testers are finally in flower mode!🧐👍 Both testers are in flower and are ready to eat! Today I gave both girls a top dressing with Down To Earth 4-8-4 Flower Mix at a ratio of 2tbsp/g and Coast of Maine's Stonington Blend 5-2-4 Organic Plant Food at a ratio of 1tbsp/g which I simplified by using 1/3 cup of the 4-8-4 and 1/4 cup of the 5-2-4 in the 4g pot and 3/8 cup of 4-8-4 and 1/8 cup of the 5-2-4 in the 3g pot. After working the amendments into the medium, I watered it in with 1g of straight de-chlorinated water ph'd to 6.6 @ 74℉. It will take a week for the microbes to begin breaking it down and will last for 3 weeks or so. I'll monitor them and decide on whether I'll give them another top dress or let them ride. I've also increased the power to the HLG 650R's the the Trolmaster Hydro X Controller to 75% which has them pulling 990w at the wall and have them hung 32" above canopy. I also starting adding in 4 hours of UVA during the middle of the light cycle for the remainder of flower. I've been monitoring their leaf temperatures and they're running 71-73℉ which is perfect! I have the AutoPilot APC8200 co2 Controller set to 1100ppm with a 100ppm window and the AC Infinity Cloudline T6 controller set to maintain a 74℉ temperature in the tent while the lights are on. 1/21- I'm watering these thirsty girls daily with straight de-chlorinated water ph'd it to 6.6 @ 74℉ and they're both thriving! The #1 pheno being roughly a week ahead of the #2 is starting to flower nicely. The #2 pheno, while different behind her sister, is finally beginning to get her act together a is making flowers!🧐 1/23- I watered/fed both testers today with 0.5g of de-chlorinated water each with GreenGro's Natures Brix and Granular Myco mixed in, after which I added 1 tsp/g of unsulfured molasses and then ph'd it to 6.6 @ 74℉. They'll be getting only one more feed from here moving forward as they will take a little longer than the other testers in the run that are well into flower now. 1/25- Yesterday I didn't water but continued today with 0.75g for the #1, and 0.5g for the #2, of straight de-chlorinated water ph'd to 6.6 @ 74℉. They're both looking really healthy and both into flower! I'm really looking forward to Week Four of flower where they should start to reveal how they're going to look after stretching!😍💚 😎💚 Thank you for checking out my passion in life! Please visit as often as you wish and I hope you enjoy this journey as much as I know I will! Grow Strong! 💪😎🤙
Likes
17
Share
Dear friends, I wish you a Merry Christmas and a Happy New Year! I can’t say that something more important happened to me this week than your time spent with your family)) But I’ll tell you a couple of things! Firstly, I set up a camera and recorded timelapses, enjoy)) Secondly, I started new pallets while both bushes are on the same, but will stand on different ones when they grow large. In third place this week, but the most important is automatic watering. One pump waters 2 plants with a solution at once, watering occurs evenly at 1100 ml per minute per plant. At this stage, I water the plant 4 times a day, 300 ml each. 700-800ppm. pH 5.8 is strictly observed. In fourth place is the news that I cut off the tops, after that I will try to bend them in different directions before installing the scrog mesh. Next week we will install a scrog net, a co2 tank, an automatic co2 supply system. By the way, I forgot to tell you, all growbox systems work from the application on the phone: watering, nutrient solution, fans, and we will add co2. next week. In the meantime, friends, I wish you happiness and great harvests in the new year! I love everyone!
Likes
5
Share
She's showing signs of a phosphorus deficiency. will feed the plant fox farm big bloom to correct the issue.
Likes
7
Share
SST 7g of alfalfa per 5l , foliar and soil drench , followed by a kelp foliar next day eyeing the dosage as it’s like 0.03 for my foliar spray bottle 🙄🙈 probably curling up because of that . Also tied down some fan leaves and did few chop and drops through out the last week also was topped at some point 😂 forgotten when This week i will foliar with SST alfalfa & corn & kelp Rest for the soil drench I will mix with super8 tea
Likes
11
Share
Day 1. The cuttings after being rooted in the special tray were transplanted into small jars and allowed to acclimatize in the appropriate boxes. After a few days we transplanted them into 18 L pots filled with plagron growmix, a prefertilized substrate, and then they were placed inside our cultivation box, the one in the photos. Being a prefertilized substrate we watered with only water with a pH of 6.5 until the water ran out into the saucers. As the 18 L pots are very large, no more water was needed for the first 5 days. DAY4. The plants were topped.
Likes
33
Share
Hi Growmies, Basically its not going well for the Cbd gal this week, whilst the other seeds have really taken off shes been stuck in her shell all week. It did start cracking but then uas completely stopped over the past few days, so yesterday i removed the shell and shes stuck really tight in the shell membrane 😐 Im going to now wait for her to loosen this once shes gained some energy from the lamp. As with the others shes not gone outside due to the weather and depending on recovery may have to become an indoor project, but we'll see. Thanks for stopping by 😊✌️